SIT Value and Stock value at storage location level

HI
Can anyone tell me how to get the following:
1. The value of the Stock in Transit on monthly basis
2. The value of the stock at storage location level. The Stock value is correct at plant level
Thanks in advance.
Soumen

Hello,
(1) please have a look into the Howto Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
(2) Please have a look into the note:
589024
And consider to use the feature Constant selection.
http://help.sap.com/saphelp_nw04s/helpdata/en/d2/02223c5f00612be10000000a11402f/content.htm
I hope this helps, Michael

Similar Messages

ATP and Route Determination at Storage Location Level

Hi Experts,
I'm working on a project currently and one of the requirements is to have ATP and Route Determination at Storage Location level. I know SAP standard for this is at plant level but was wondering if anyone has had this requirement before, and if so what course of action they took to solve this issue.
Any help would be greatly appreciated.
Thanks,
Mark

Hi Mark,
in my previous project we have a customized table created for all the route determination and used mv45afzz move field to vbap to determined the route.
not sure if there is a easier solution but at least it is doable through customization for sure.

Report on QI, Blocked, Returned Stocks at Plant & Storage location level

Hi,
Would like to know any reports which gives QI, Blocked, Returned stocks at Plant & Storage location level.
Regards,
Vengat

hi,
What do you exactly mean say by "Returned stock"..
Also go through by MMBE tcode ...
Regards
Priyanka.P

Opening and closing Stock report at Storage location level- date wise

Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
Sam

Do I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam

Can PIR created at wbs element and MRP area of storage location level

Hi,
I tried to create an planned independent requirement at MRP area and WBS element level, but failed. The MRP area is not plant level, but storage location level.
*When trying to create account assignment category Q for it, then there is an error message saying:*
**only stock requirements are allowed when planning at MRP area level.**
Does it mean it is not possible to create planned independent requirement for this case?
Thanks!

Select the "Issue storage location" as '2' here:
spro -> production -> material requirement planning -> mrp groups -> overall maintenance of mrp groups -> overview -> mrp control parameters at material level -> (field) Issue storage location selection
& make sure:
1. In the BOM issue storage location is blank for the components
2. For the FG products , in mrp area prod.storage loc is maintained
3. Components are extended to the mrp area.
Pl. revert with the results

WRONG STOCK DISPLAY AT STORAGE LOCATION LEVEL

Hello to All,
I've made stock transfer within plant using Mvt. 311, & now when I'm disaplaying storage loc. data in MMBE, MM03 & MC.5, it is showing negative stock for storage location from which it is transferred along with stock value as negative.
As per IMG settings, negative stock is not allowed also not in the material master. Pls. guide me how to correct this stock, is it related to LIS updation, if yes then what is it's procedure.
Thanks
Amit

If in MMBE, system is showing negative stock then negative stock has to be allowed for that plant, storage location & material.
Pl check & confirm using following path.
IMG -> Material Management -> Inventory Management & Physical Inventory -> Goods Issue / Transfer postings -? Allow negative stock.
Regards
Bhavesh Mistry

No Stock value at Storage location level in BW report

I am facing problem in getting stock valuation at storage location level.
The problem is that, in R/3 Stock valuation is done at plant level, when we do storage location to storage location movement , only stock quantity gets changed and no FI entry is getting generated . So there is no movement of stock values at all. when we load this transaction data into BW , obviously i will arrive with wroung value . so what to do in this case ?
Thanks & Regds,
Kavan

Hi Kavan,
Could you please explain the scenario & provide the Ds you are using.
Thanks & Regards,
Suneel

MCHB,MARD - Stock available at plant level and storage location level

Hi ,
How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
In MCHB-Stock at lot level is shown.
In MARD-Stock at Storage Location level is shown lncluding
the stock maintaned at the lot level.
If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
Do I need to subtract the MCHB Value from MARD Value ?
Is there any other way available to find the stocks which is not maintained at lot level.
Regards
Prasath

Hi prashant,
What do u mean by stock maintained at SL level without batch level. Do u mean that some materials are subjected to batch management and some or not?
If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level. But still what ever u are getting from MARD table isstock at SL level only.
If u have activated batch management for any material, it will always be shown at lot level also.
hope this clarfifies query
award points if found useful

Stock valuation down to Storage location level

Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.

Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further?

Availablity check at storage location level in STO

Hi,
There is an unique requirement from my client with respect to the Availability check at storage location level in STO
Process:
Based on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
During this availability check the stock will be considered at plant level and not at storage location level.
Requirement/Scenario:
Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
Example
Total required qty: 1000 of material X
material X - Stock in Storage location A : 600
material X - Stock in Storage location B : 400
Two separate line item needs to be created in the STO
Sl no
Material
qty
Issuing storage location
1
X
600
A
2
X
400
B
Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
Please suggest how to achieve this. If any enhancements needs to be done we will do it.
Thanks & regards,
Prashanth

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

Re: ATP check at storage location level in sales order.

Hi ,
I have a requirement wherein storage location is determined in my sales order, the ATP check is done at plant level as well as storage location level , and the smaller of the two quantities is taken as the result of the ATP check.
My requirement is that the ATP check should only be performed at storage location level .
Please suggest if there is any standard setting available in SAP.
iF NO , PLEASE SUGGEST SUITABLE USER EXIT, WHERE I can add my requirement.
Regards,
Nilesh

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

Opening and closing balance values at storage location level

Dear all,
I want to know opening and closing balance values and receipts and issue values at storage location level for certain period.
I tried with MB5B, it is not giving value at storage location level, it is giving quantities at storage location level and values at plant level. But requirement is: please see below example:
All values are in USD
Storage location:      1001     1002
Opening Balance:      2000     3000
Receipts:                           1000      2000
Issues:                            2000     3000
Closing Balance:      1000     2000
Please help in this regard (I want value of the stock only, not qty)
Regads,
Veerappa
Edited by: Chinna Veerappa on Jul 27, 2010 5:27 PM
Edited by: Chinna Veerappa on Jul 27, 2010 5:28 PM

vlauation is at plant level (MBEW table) the storage location level does not carry values (table MARD).
You may have to develope your own ZMB5B program and calculate yourself what is not stored in SAP.

Need to display the Stock Values at storage location level - 0IC_C03

Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal N

Hi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
   What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information
Please let me know you need any more information.
Thanks in Advance
Gopal N

How to realize summarized display of stock values on storage location level

Hi all,
we have implemented in Release 3.5 a report to analyze Stock values on storage location level according to the "How to...realize summarized display of stock values on storage location level"- paper. The report is running witout problems.
Now we are going to upgrade our BW-system to release 7.01 in technical environment, we have not upgraded our reports.
Executing the report in release 7.01 we get an error message "Object field I_S_DATA-0TOTALSTCK not found"
The error is coming from line 14 Inc GET_FIELD_POSITION_D in Prog CL_EXM_IM_RSR_OLAP_BADI.
Unfortunately the document "How to... realize summarized display of stock values on storage location level" can no longer be found in SDN.
Is there any new How to - document for this kind of reporting?
Does anybody can give me advice for chances in coding?
Thank you for answers.
Best regards,
Andreas
Edited by: Andreas Förner on Dec 9, 2009 1:52 PM
I have got a solution from support.
The solution is described in note 924320.
Andreas

Hi,
I assume you have also created class "ZCL_IM_Z_MATERIAL_PRICE".
In the implementation of virtual InfoObjects
ZCL_IM_Z_MATERIAL_PRICE we have changed the method INITIALIZE:
OLD:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                        i_fieldnm = <l_s_sfk>-kyfnm <--
                                        i_s_data = i_s_data ).
   ENDLOOP.
NEW:
* fill the global variable
     UNASSIGN <l_global>.
     ASSIGN (l_global_name) TO <l_global>.
     CHECK <l_global> IS ASSIGNED.
     <l_global> = cl_exm_im_rsr_olap_badi=>get_field_position_d(
                                    i_fieldnm =
<l_s_sfk>-VALUE_RETURNNM
i_s_data = i_s_data ).
   ENDLOOP.
This solved our issue. Please regenerate the query after
implementing the correction.
Hope it solves you issue too.
Best regards,

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

SIT Value and Stock value at storage location level

Similar Messages

Maybe you are looking for