Size/color of error message

Hello All,
Is it possible to change the default size and color of the WebDynpro error/warning messages? Can we somehow change the icon, displayed next to the error/warning mesages?
Thanks,
Asheesh

Since webdynpro is suppose to be a standard business UI, I doubt that there is a easy way to change the look and feel of the messages.
Regards,
Rich Heilman

Similar Messages

Need to bypass "Remove and check color cartridge" error message

I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
Please help.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

Color Management / Error Message

In Adobe Bridge all pictures show a strong and un-natural blue tone. Trying to use the colormanagement to applicate my (calibrated) monitor profile, I get the error report:
"Suite color management is not activated. Suite Color management is only possible, if a registered product has been started in advance, to activate this function"
But - my CS4 IS registered!!
Any Idea?
Background: I have been using a 30-days trial, then bought the product, and didn´t install it from the CD, but only registered CS4 in the startinng dialog. Perhaps better de-install everything and install it new from CD?

Hi there
It sounds like you might be using Adobe Bridge, correct? If so, you can try reading through this help article that matches the error message you're receiving: http://helpx.adobe.com/creative-suite/kb/error-suite-color-management-enabled.html
If you are indeed using Bridge and need additional help, please post again so that I redirect you to the correct forum.
EDIT: Most likely, you've installed Adobe Bridge with an individual product such as Photoshop or Illustrator, and not as a Creative Suite - see below.

Color Settings Error Message

I got an error message that a pse7 file, color settings.csf was corrupted. I
am running windows xp. What do I do?

function(){return A.apply(null,[this].concat($A(arguments)))}
pib56 wrote:
Thanks. Reinstalling solved the problem.
Thats great.

Creative Suite Color Settings Error Message

I have completely bought and installed Indesign CS5.5, Photoshop CS5 Extended and Illustrator CS5. The Adobe Bridge was of course installed with each of these packages. Now I try to setup one colour setting in Illustrator save it as required, than I start the Bridge, got to edit -> Creative Suite Colour Settings (just for synchronization) and I get a nice Error message, telling me that Colour Management can not be enabled.
My question now, do I really have to buy all theses software packages again in an adobe creative suite edition, or is it also possible to synchronize these settings if one buys this software applications separately?

That question is beyond me. You might try posting this in the Creative Suite forum. http://forums.adobe.com/community/creativesuites/creativesuites_windows

HP Deskjet 2520hc color cartridge error message

HP Deskjet 2520hc color cartridge error messageAfter turning on the printer the ink indicator shows 3/4 color cartridge. Before the advent of the issue printed approximately 100 pages. After you print the first worksheet, an error is raised: the color cartridge is damaged. ... Print quality is good, including photos. To print the next page you need to turn off the printer and turn it back on. After printing error occurs again. All the recommended steps: cleaning the contacts of the printer, rebooting, no result is given. Ask for professional help.

Hey , The cartridges you used when you got it are SET-UP cartridges and it says that on the side of the cartridge, correct? If so, they are used to initialize the printer but not made for longevity or high print yield. After the set-up cartridges you have to purchase normal cartridges that have significantly higher page yields and contain more ink. I'm sorry that you are not in a position to purchase more ink right now but unfortunately for you to continue printing you need all the ink cartridges and will have to invest in new cartridges while the others run out. To conserve ink try printing all your documents in black only. Your color ink cartridges will run out a lot slower. (be aware that even when printing in standard color and printing black text documents, you will still be drawing color ink.) Hope this clears this up for you a bit. Have a great day!

Colorsync error messages

color Sync error message
Posted: Aug 28, 2010 4:07 PM
Click to reply to this topic Reply email Email
I have had trouble obtaining good prints from my Canon MP 490 printer. I did a
Color Sync first aid check and received this message:
/Library/ColorSync/Profiles/EW-sRGB
Tag 'desc': Tag size is not correct. Could not be fixed.
What does this mean and what should I do? Thanks, HJZ

Going to need a Lot more info to be of any assistance. As Sig said what OS is running in Fusion. What version of Fusion. What version of QB. Did it ever run. Do you have the network setup in the Fusion OS. Have you installed VMware Tools.

Simply question: how can I change color of validation message ?

After validation user has got for example text: "Wrong data" in black color. How can I change this color on red ?

You can enclose your validation error message within a span tag as follows
<span style="color:red;">error message</span>Varad

Page process: user defined error-message

hi to everyone!
i want to display a user-defined error-message, if for example a select in an anonymous PL/SQL block returns more than one row. i tried it with an user defined exception, but i get allways the success message... how can i do that?
thanks for your help.
bye,
christian

Hi,
In the exception handler of your PL/SQL process use this :-
apex_application.g_print_success_message := '<span style="color:red">Error message</span>';Regards
Paul

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

HP LaserJet CP1025nw Color getting a Mispick error message

I have a HP LaserJet CP1025nw Color printer, running on WIN 7 64-bit and I am getting a Mispick error message after almost every page that prints. I have had this printer for the past 1-1/2 years and it has worked fine. I replaced the black toner over a month ago with no issues. The Attention light blinks and has to be rest after each print job. I can print a test page then it errors, I clear it and then it will re-print the test page again. I have cleaned the rollers, check for any loose paper pieces, changed the paper (type and size) nad have powered off & unplugged the power to the printer several times. It will come up with no errors and then once I send something to print, it will print it and then immediately after the page is printed the Attention light will start to blink. I have even gone as far as unintsalling the printer and reinstalling all the drivers and software, to no avail.
Any help would be greatly appreciated.
Thank you,
Jarm1964

This is probably a little late but it may help someone with the same issue in the future. I had the exact same scenario - HP LJ CP1025nw color on Win7-64 and it suddenly started receiving the mispick error after every print job. There was nothing stuck, no paper jam, no problem picking up paper, etc. It turns out it was a setting on the printer - under Printer Properties (from Devices and Printers), on the Configure tab I had checked Allow Manual Duplexing and Jam Recovery set to On. When I unchecked Allow Manual Duplex and turned Jam Recovery to Off, the mispick error went away. Not sure which of the 2 was the culprit.

1600 all-in-one series printer error message to remove and check color cartridge will not go away

Error message, remove and check color cartridge will not go away even after replacing cartridge (same refilled). Any help would be appreciated.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

New preview function for iPad–error message "Multiple page sizes not supported"

When I try to use the new preview function with my iPad I get the error message "Multiple page sizes within a layout are not supported". I have a page that is 768 x 1296. I would really like to preview this folio before publishing. Any suggestions?

If you're trying to create an article that scrolls vertically, you can create a 768x1296 article in a 1024x768 folio, but you need to select a Smooth Scrolling option when you create or import the article, or in the Article Properties dialog box.

When I try to go to certain pages on PayPal, I get an error message which says 400 Bad Request: Size of request exceeds server limit. Didn't do it before the lasted Foxfire update. Can I revert to an older version?

1. Using Windows XP home
2.PayPal is the only website I have problems with Foxfire; works fine on IE8
3. I can get to some of the desired pages through other links on PayPal so it's not the pages themselves
4. The error message contains this:
Cookie: KHcl0EuY7AKSMgfvHl7J5E7hPtK=STMZXVPEjOuzek-HGHcBJRjmRXIQgXpML8uy9fV13oPeEYcAUnBOhKFzvNJqcb-rsc2S6nlYOklSdX6P; cookie_check=yes; LANG=en_US%3bUS; INSIDE
When I saw Cookie, I did a disk clean including temp files and cookies. No difference. I also did a System Restore, to no avail.
5. The 400 message actually reads: Size of a request header field exceeds server limit.
6. Talk to PayPal customer service and they have not heard about any Foxfire conflicts.
7. Windows Firewall and Kaspersky Firewall turned ON but this is the same configuration before the Foxfire software update. PS. I'll give up Foxfire before I give up Kaspersky

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Size/color of error message

Similar Messages

Maybe you are looking for