Size report question

i saw this in there and am curious why it's so huge. is my
file corrupt or something?

If the Distribution Status on the Process Monitor is stuck on POSTING, one of the issues my be the Process Scheuder http timeout is occuring with large reports. If so, accomplish these steps:
Log on to server with Process Scheduler
Assume that Process Scheduler is for the FINTSTT domain.
Shutdown the FINTSTT domain.
cd /u01/PT8.44.10/appserv/prcs/FINTSTT
vi psprcsrv.ubx
Section that is of interest looks like:
PostReport SRVGRP=BASE
LOAD=50 PRIO=50
SVCTIMEOUT=3600
BUFTYPE="ALL"
Change the SVCTIMEOUT to the new value (in seconds).
Save changes and exit vi.
Make the changes again on the psprcsrv.ubb file.
Delete the FINTSTT Process Scheduler cache.
cd /u01/PT8.44.10/appserv/prcs/FINTSTT/CACHE
rm -r *
Configure the Process Scheduler Server for FINTSTT using number 3 on the psadmin tool. Accept the defaults.
Start the FINTSTT Process Scheduler.
Note: To determine if you have this problem go to the Report Repository location and see the time when the report file fails while it is being transferred. If the duration to transfer the file when it fails equals the SVCTIMEOUT value then you have this issue.

Similar Messages

File size reported reported differently

Can someone help me explain why this file size is reported differently depending whether you list file or folder properties:
This is an Azure Basic_A1 VM. Drive E: is standard VHD attached to the VM (Page Block Storage).
This is an active/open file that is currently being written to, and is growing in size.
How is it that file size is reported as 8 GB if you query the folder, and 24 GB if you query the file?
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

I ran this script for the last 8 or so hours out of this 19 hour upload:
$Folder = "e:\Backups\Sam Client\To Azure Page Block Repository"
$Log = "c:\Sandbox\Upload4.csv"
Write-Output '"FileQuery","FolderQuery","Time"' | Out-File $Log
Do {
$a = (dir "$Folder\To Azure Page Block Repository2014-09-23T051450.vbk").length/1GB
$b = (dir $Folder)[1].length/1GB
cls
Write-Host "File size reported from file list: $('{0:N2}' -f $a) GB" -ForegroundColor Green
Write-Host "File size reported from folder list: $('{0:N2}' -f $b) GB" -ForegroundColor Yellow
dir $Folder | FT -AutoSize
Write-Output """$a"",""$b"",""$(Get-Date -Format 'hh:mm:ss tt')""" | Out-File $Log -Append
Start-Sleep -Seconds 10
} while ($a -ne $b)
That collected over 3,000 sampling points that are 10 seconds apart. I then graphed that data:
The vertical axis is file size in GB, the horizontal axis is time (not directly - it's sampling points)
And you can see file size as reported by folder query lags behind file size as reported by file query. The amount of lag was upwards of 90GB at its highest point. And it took anywhere from roughly 5 minutes to 3 hours for 1 indicator to catch up with the
other.
The question is why these two sets of numbers are different? Is there caching going on somewhere? Is one indicator accounting for all file blocks while the other is accounting for committed blocks only? Can someone from Microsoft shed some light on this?
This is important to know to be able to plan disk space requirements when attempting to use Azure as backup target with large data sets regardless of the software used.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

No Image Size menu or Message Size report in New Message window

Greetings all,
New iMac user (OS X 10.5.8, Mail 3.6). In scanning Mac Help & the Apple Support forums, I note numerous references for Mail 3.6 to an Image Size Menu button at bottom right of Compose window, and a Message Size window at the bottom left. Have never seen these items. Are they hidden? If so, what is the reveal? Appreciate any assistance. Thank you.
Gallery Info

To All,
After sending in my question, I went back to Mail Help & noticed that images could be attached by dragging from Photo Browser or Desktop or Finder, or by clicking on the 'Paperclip' icon. We had only ever used the 'Paperclip'. Dragged an image from the Photo Browser and both Message Size report & Image Size menu button appeared. Then went back and tried Desktop, Finder & 'Paperclip'. Now, the two items appear, whichever method is used. Doesn't work on all .jpg images, but is sufficient for the need.
Guaranteed that if original question wasn't submitted, never would have found out how it works. Many thanks to Apple Discussions.
Gallery Info

CLibInit size in "Generate Size Report"

I've got a handful of projects that use the Box2D Alchemy Port and noticed for each of them the size of cmodule.Box2D.CLibInit in the "Size Report" from Flash is different. The size seems to increase with the size of the project, but why would CLibInit be different sizes if it is exactly the same library / SWC?

Hi Kong,
Try with following example:
REPORT ZFONT NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
NEW-PAGE PRINT ON.
PRINT-CONTROL FUNCTION 'SF000'.
WRITE: / 'This is CPI 20'.
PRINT-CONTROL FUNCTION 'SF020'.
WRITE: / 'This is CPI 6'.
PRINT-CONTROL FUNCTION 'SF008'.
WRITE: / 'This is CPI 12'.
PRINT-CONTROL FONT 1 LPI 6.
WRITE: / 'font 1 lpi 6'.
PRINT-CONTROL FONT 2 LPI 6.
WRITE: / 'font 2 lpi 6'.
PRINT-CONTROL FONT 3 LPI 6.
WRITE: / 'font 3 lpi 6'.
End of print-control
NEW-PAGE PRINT OFF.
End of Program
thnks
Anurodh

Tablespace size report for SQL and oracle servers

Hi All
is it possible to get tablespace size for all sql and oracle server in the form of report in SCOM.
Regards
Madhavi

Oracle: Table size report of Oracle is depend on the MP which yu imported into SCOM
SQL :
1) Create a group which contains folowing dynamic rule
2) Reporting workspace --> Microsoft Gneric Report --> Performace Detail
3) in the parameter area, create a new series, add group which create in step 1) and select the rule: MSSQL XXX: Collect Database Allocated Size(MB)
4) Run the report
5) In the report, click actions and select "Performance details for every object"
Roger

Financial Reporting Question - Formula row Issue

Hello,
I have a financial reporting question and would like to have your inputs in order to achieve what I am trying to do.
I have a report with two grids – grid 1 & grid 2. And there is a formula row in grid 2 that is “change between the two years” worth of data. The year and period combination is in the page of the grids.
Formula row (in grid 2) = ((Grid1.[b,6]) - [b,6]) / [b,6]
The issue is when I change the Page selection in Grid 1 the formula in grid 2 doesn’t get updated values unless and until I make a change in the grid 2 Page selection too. If I don’t make any changes in the page selection in grid 2 it keeps the data (looks like it is still considering the previously retrieved/calculated values) as it is without any update.
How can I make the formula row in grid 2 dynamic so that it gets updated no matter what combination of page selection I make in either grid 1 or grid 2 or even if I just change something in grid 1 and nothing in grid 2?
Please let me know your inputs. Any help is appreciated.
Thanks,
Krrish
Edited by: Krrish on Dec 3, 2012 7:45 AM

Page POV will be specific to the grid.Why can't you try to have the POV at the report level.In the HTML view of the report,the report will give you a Drop Down to select POV for all Grids.Select All Grids option and then set the POV which will be same for both the grids (which you want) and all your formulas will work.

Updateable Report Question.

Updateable Report Question.
Currently I am developing an XE application, so I think that is apex 2.0.
Here is an example of what I wish to achieve.
Suppose I have an emp table with columns
dept, id, name and comment.
I create an SQL report as
SELECT * from emp;
I only wish to see the name and comment columns, so in the report attributes I un-tick show the columns dept and id.
I want the user to be able to update the comment column, So I edit the comment column and in “Tabular Form Element” I change the “Display As” from “Standard Report Column” to “Text Field”
This now lets me edit the data in the column in the report.
Now want to add in an on change event to call a javascript routine that will use ajax to do the actual update.
My problem is that I need to pass in the “hidden” dept and id column values as well as the modified text, thus
In “Tabular Form Element” – “Element Attributes” add in
onchange="updateRemarks(#DEPT#, #ID#, this.value)"
Unfortunately this does not work, apex does not expand the #DEPT# & #ID#, and just passes in the literal text.
So how can I achieve this?
Thanks,
GP>

The columns and rows have a set format for the Id, so if you know one Id you know the row and the ids of all the other columns.
As an example, this will show the value of column 6 when you click on any column with the function call in the Element Attributes:
Script:
<script type="text/javascript">
function showCol6(col){
var col6 = document.getElementById("f06_" + col.id.substr(4,4));
alert(col6.value);
</script>Element Attributes:
onclick=showCol6(this);You could also use a Named Column template, specific to this region, to include the column values directly in the function call, but I think it's best to stick with the ApEx defaults if possible.

BEx Variable in Webi Report questions

Hi Gurus,
Here is my issue.
I created a BEx Query 0SD_C03 Cube with following fields
Two Columns
One Key Figure: Subtotal1
One Restricted Key Figure: Subtotal with restriction " Sales Organization 1000"
Two Rows Plant, Sales Organization
One Variable with Sales Organization.
When I ran this query in BEx Analyzer I can see all Sales Organization values in prompt list, How ever when I created a Universe and ran a webi query I can see 1000 in the Sales Organization list.
Is this because I have restricted Key Figure with Sales Organization 1000 in the query?
I removed my Restricted Key Figure from my query and tried again this time I see some 10 Sales Oraganizations but I didn't see all available Sales Organizations. Does BO Universe LOVs restricte the list?
Thanks
Sasi

Identical entry so this is being closed:
duplicate:
BEx Variable in Webi Report questions
Ingo

FORMS & REPORTS QUESTIONS.

Hi,
Can any one provide me a good no of Forms and reports question to prepare for the interview ?
Thanks in advance .

If I was an interviewer, and 60 seconds to test, I'll ask somme question like:
What kind of blocks exist?
How do you build a master detail form ?
What kind of trigger do you use for field validation ?
how do you manage graphic homogeneity ?
how do you build a LOV ?
Patrick.

Supply Shortage Report question

Hi
Supply Shortage Report question:
In my cube I have material, 0calday, receipts and demand key figures.
Formula for Supply Shortage = Receipts u2013 Demand.
Users want to see number of consecutive days a particular productu2019s Supply shortage value is below zero.
Input criteria:
Date range:
Consecutive days:
For e.g. If user enters date range as u201C06/01/2010 u2013 07/31/2010u201D and Consecutive days as u201C4u201D they want to see all the products which have u2013ve Supply shortage values consecutively for 4days or more.
Can anyone tell me how we can accomplish this in Bex? Thanks in advance.
Regards
Sree

Hi,
Please check the follwoing option.
Load the msae data in one more DSO which will be a lookup DSO. In that DSO theer will be a daily load with the date as "Historization Date" which will keep the Current date with every load. In that DSO calculate Shortage Indiactor
Shortage Indicator 1 if Receipts < requirement.
By doing this you will be having Data with Historization date (Daily) with an Indicator for Shortage.
Now while loading this cube populate one Chracteritics a Shortage Counter by doing look up theis DSO.
You need to Indicator in the DSO with today's date and historization date and you need to add the counter on the basis of avilable consecutive entries by putting a loop for the same.
By this approach you may achieve your need.
I hope it will help.
Thanks,
S

Internal Email Recipients by Size report

Hi,
Is IronPort had "Internal Email Recipients/Senders by Size" report ?
I see this information in Mail Flow Central reports, but not in IronPort reports....

Hi,
Thanks for the answer.
I am looking for "Internal Email Senders/Recipients by Size" part of MFC Volume Report by User. See example below
or page 64 of MFC 1.4 User Guide
Is any way exist to add this information to IronPort reports ?
Internal Email Recipients by Size
Envelope Recipient Messages % Virus Positive % Spam Positive Total Message Size
Virus Spam Positive Suspect Spam Total
anatsh@*.*.* 0 0 0 44 0.0% 0.0% 77.06 (MB)
iditm@*.*.* 0 4 0 13 0.0% 30.8% 34.98 (MB)
tehilak@*.*.* 0 3 0 60 0.0% 5.0% 28.47 (MB)

[svn:fx-trunk] 14462: Quick fix to ensure total byte counts are accurate for -size-report.

Revision: 14462
Revision: 14462
Author:   [email protected]
Date:     2010-02-26 14:11:20 -0800 (Fri, 26 Feb 2010)
Log Message:
Quick fix to ensure total byte counts are accurate for -size-report.
QE notes: None
Doc notes: None
Bugs: SDK-25600
Reviewer: Paul
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25600
Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SizeReport.java

If this is textual input (as in a CSV file), you wouldn't use a DataInputStream or DataOutputStream. Use FileReader and FileWriter objects instead.
Actually, unless this is a homework assignment that tells you to write it yourself, you should just use a library that can parse and format CSV files and just use that.
My battle plan is to count the number of rows and commas. I would then use these counts in my subsequent loops. Why? What is the purpose of those counts?
Personally, I'd suggest that you start by writing a method that does the changes you need on a single line of input. (The changes you describe sound like they can all happen on a per-line basis.) Write lots of unit tests to try out various inputs and that you get the correct outputs, given the changes you say you need on a given line.
When you're done with that and have it working perfectly, then you can write the code to read a file, loop through it, call the method that fixes a single line, and then output that line.

Generating size report for Flex project

How do I do this? I would like to see a breakdown of asset
and code sizes like the one shown in Flash when "generate size
report" is selected...thanks!

Not that I would recommend this in most case's but if the
PDF's do not need to be dynamic you could use something like PDF995
and send your page to it as a formatted print job. I had a client
that wanted printouts from Filemaker in PDF so they could Email
them to a list. Had to be automated so we just set up a print
script in filemaker to print to a PDF converter. Don't think it was
actually PDF995 and I do not remember what it was but I mention
PDF995 because I use it at home. You just need something where the
API allows you to specify the location to save too and the name of
the file as part of the printjob. Send the files to a standard
location on your server and trap the name of the file in a
database. Bingo. Easy PDF's.
Of course the alternate option is to auto generate your chart
as a web viewable formatted for print version. As it changes notify
your users with an email link of where to view it and then let them
print their own PDF using PDF995 or other such utilities if they
want to.
And then get back to the Game of Half-Life2 Death Match going
on in the server room.

Simple Report Question

Post Author: scott123
CA Forum: General
I want to take the information in a simple excel table and recreate it 3 times, each time sorting/grouping on a different columnHere is the tableAnd here is the report that I'm trying to generate (first sorted by name, alphabetically, then grouped by rank, then grouped by size) I'm comfortable working with excel tables in Crystal, but I'm running into a problem repeating the information and then sorting each group separately. I also have no problem doing each group in a single report (without repeating any records), but I'd like to include all 3 groups in a single report. My apologies for how remedial this question is- I thought for sure that Crystal could do this easily but I've spent a couple of days on this and am running into a brick wall.

Post Author: pandabear
CA Forum: General
That's right Scott, and maybe make them "on demand"
sub reports so the user only has to see the data they
really want at the moment. Gives the report a nice clean look too.
PB

Historical Reports question // UCCX 7.0

Hello,
I was wondering for how long the HR records are available for report generation?
Maybe they are kept until you manually delete them? and where are these records kept inside the server?
Thank you in advance for your help,
DS

Hi DS,
The HR records are setup on a purge schedule which is defined in Appadmin under Tools and Historical Reporting. Here you can set the max size you want your database to get to before it performs a purge operation on the oldest records. There are also other settings to define purges.
You will need to check your configuration to determine how long the data is there and when it will be purged. The data is kept in the SQL database (possibly in MSDE if a single node) and the database name is db_cra.
Hope this is helpful but let me know if you have any questions.
Mike

Size report question

Similar Messages

Maybe you are looking for