SLD information about kernel level

Hi all,
does anybody know if and where the SLD captures information about the kernel levels (release, patch level etc.) of the registered SAP systems? I am not able to find those anywhere but I know information is at least
to some degree contained in the SAP Support Packages.
Thanks in advance!
kind regards
elmar

thanks for the info,
but actually I am well aware on how to browse the SLD for information. I am just unable to find
the information about used kernel levels. So either this information is not present in the SLD
or I am just unable to find it and looking in the wrong places. As a third possibility it might
be some kind of configuration issue...
thanks, regards elmar

Similar Messages

Viewing in Answers descriptive information about a level

Hi, I have a Customer dimension level in BI Admin with its logical level key CUST_NAME.
I also have some further information about each customer, like address and phone number (stored in CUSTOMER Logical Table), how could I link them to the Customer and view these data in Answers?
It's like a kind of descriptive level attribute I'd want to view in Answers associated to the level logical key...
any suggestion would be appreciated very much!

As in the 1st post, I'd want to associate address and phone number to my CUSTOMER level, in which I drill down using CUST_NAME as a logical level key.
The only way to view these information is include their columns in my Answers query, I ask the forum if is there another way to, for example, click on the customer column just drilled-down and view customer address...
In another way: which is the utility of having a level key if it isn't logical level key?
for example in my CUSTOMER level now I have 2 level key: CUST_NAME, which is logical level key and drill-down enabled, and CUST_ADDRESS which is not logical level key (it has the blue icon). Which is the utility (if is there) of having in my level CUST_ADDRESS that is not a logical key?
Edited by: battle84 on 1-dic-2009 9.29

Where is the information about "Patch Level" of a particular version

Hi all,
Where I can see what is the latest "Patch level" of a particular version of tuxedo. For example, what is the latest patch level of tuxedo 9.1, where I can find it out?. This information is public ? We need a oracle contacts?
thanks in advanced

MBriz,
The number at the start of last line in $TUXDIR/udataobj/patchlev is the Tuxedo patch level. (If there is no $TUXDIR/udataobj/patchlev file, then you are running the General Availability version of Tuxedo.)
This information is also available by executing "tmadmin -v".
A third way to get the information is to look at the first line printed by the BBL in the userlog on a particular day, which will be something like "09-30-2010: Tuxedo Version 10.3.0.0, 32-bit, Patch Level 041". (Other processes' first ULOG message of the day will indicate the Tuxedo Version, but will not include the patch level.)
Regards,
Ed

Basic Information about Organizational Level & Org. level value.

Hello Experts,
I am new to the field of SAP and security. I have the following questions:
1. What is an organizational level & org. level value? What do they represent? How do they matter in PFCG?
2. What is a derived role and what is its usage?
I appreciate your help regarding this. If you could point me to some documentation regarding this that will be very helpful.
Regards, Ben

Ben,
I am new to the field of SAP and security. I have the following questions:
1. What is an organizational level & org. level value? What do they represent? How do they matter in PFCG?
if you want to restrict on region vice (best use org level & values (plant,company code, sales org)
In role u will notice them in red color
2. What is a derived role and what is its usage?
Derived role inherits menu struture and the function from the parent role. Derived role do not differ in their functionalities(identical menu & trans) but have different characterticts with regard to Org levels.
Eg1; Master role
PFCG -> role name -> create->menu->enter tcodes-.Auth tab->export mode->read old status and merge with new data->Pop for org levels (give a full access)->see to that everything is green->generate it.
http://e-mory.blogspot.com/2007/12/sap-pfcg-create-role.html
Eg2: Derived role
pfcg->role name->create->in describtion tab towards right enter the master role name->Auth tab->export mode->read old status and merge with new data->you will get a pop for org levels (here you can restrict on plant lvel,purchasing group,company code....)
->let say for plant : 1000 ->generated / user comparssion
Once the role is added to the user. User will be albe to see only those plant related details (1000) (i.e he will have access to only plant 1000)
suppose if the user enters 2000,he will get a error message saying no access to 2000
NOTE: Any changes to the role should be done in master role (like adding tcodes)
.http://www.rssfeeddirectory.org/directory/items/346239.aspx
https://cw.sdn.sap.com/cw/docs/DOC-12021
http://help.sap.com/saphelp_wp/helpdata/en/1c/c38028816c11d396bc0000e82de14a/content.htm
Re: Authorization error after transport
Thanks,
Sri

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

How to inform the kernel about newly installed STREAMS MODULE?

I made a copy of timod and installed the copy to /kernel/strmod
as a new module (newmod). I modified the t_open.c to make
it to use the "newmod" instead of the timod. The result of the
test is "Invalid Argument". It looks like the kernel doesn't
recognize the module "newmod". I looked throught Sun
Docs, I'm not able to find any instruction for how to
make kernel to recognize my new STREAMS module name
as the add_drv does for device drivers. Can anyone point
me to the right docs and give me some instructions for informing
the kernel about the newly installed STREAMS module?
Thanks
Yuen

Forget my precedent post, here is what's on the configuration page of this module :
("[_]" are checkboxe)
1/ [_] Check this option if your users' DNs look like cn=jdoe,ou=Group1,cn=example,cn=com and Group1 turns out to be the group you want.)
Attribute of the DN which contains the group name:
[Single line text field to enter attribute]
(The name of the attribute which contains the group name. In the example above, it would be ou, as the DN contains the string ou=Group1 and Group1 happens to be the desired group name.
2/ [_] Groups are specified by LDAP attributes
Attribute names (one per line):
[Multi-lines text field]
(If the groups are stored in the user entries, along with the rest of their data, then enter here a list of attributes which may contain them.)
3/ [_] Groups exist as LDAP entries where a multivalued attribute contains the members' CNs
Nodes containing groups (one per line):
[Multi-lines text field]
(Enter here a list of nodes from where groups should be searched for. The module will look them up recursively from the given nodes.)
Attribute holding group members:
[Single line text field]
(Name of the multivalued attribute which holds the CNs of group members, for example: memberUid)
If someone could tell me which checkboxe I should select and what to put into fields it would be king as I really have no idea of what to enter and what to select.

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Using JMX to get status information about NetWeaver cluster

Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
Radu

As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt.

How can i see my kernel level patch.

Dear Friends,
How can i see my kernel level patch.
sach

Hi sachin,
When you logon to the SAP system you will get SAP Eassy Acess screen.
In that screen menu bar click on SYSTEM->STATUS->OTHER KERNEL INFORMATION(shift+F5).
I HOPE IT WILL HELP YOU.
KIRAN

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

Error when displaying information about logon to windows 7

Hi everyone,
Would appreciate your kind assistance in this issue.
Currently, I've tried to set the "display information about previous logons during user logon" however user is unable to log in after gpupdate.
Error message is as follows :
Security policies on this computer are set to display information about the
last interactive logon. Windows could not retrieve this information. Please
contact your network administrator for assistance
Thank you everyone!

http://www.grouppolicy.biz/2010/07/group-policy-setting-of-the-week-35display-information-about-previous-logons-during-user-logon/
http://blogs.technet.com/b/askds/archive/2010/07/17/friday-mail-sack-saturday-edition.aspx#lastlogon
NB:
For domain user accounts in Windows Server 2003, Windows 2000 native, or Windows 2000 mixed functional level domains, if you enable this setting a warning message will appear that Windows could not retrieve the information and
the user will not be able to log on. Therefore you should not enable this policy setting if the domain is not at the Windows Server 2008 domain functional level
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help.    I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
      2% WindowServer
      1% mds
      0% fontd
      0% mds_stores
      0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I need information about reports

hi gurus,
i need information about Trending reports and Management reports. Can any body provide me the scenario regarding this issues:

Hi
Trend reports are the reports which show a certain trend all over the years
Say, Sales revenue for the year compared to all the previous years...This show what is the trend in the last few years
Management reports high level reports with summarized data which helps in decision making. Say, Vendor performance report...this report shows list of default vendors by ranking them and management can decide to continue or not to continue with certain vendors
Regards
N Ganesh

Information about updated packages

Often when I update my system I want to know what changes have been made to a specific package. Does arch have this information somewhere? On other distros there are places you can look up what the new changes are to a package. It would be good to know if the updated package is just a new build from upstream, a change in the configuration, or a patch to fix some security flaw. For certain things like kernel updates or binutils I can get paranoid upgrading and would just like to read some change log.
It seems like the most logical places for this in my mind would be a flag to pacman when doing -Suy or perhaps information about the update on the RSS feed for new packages.

f4hy wrote:The -Qc option is great for the limited packages that have changelogs, but at that point it is a bit too late. It would be nice to know what will be changed BEFORE upgrading the package. A flag to pacman to give the equivalent of -Qc but for --sync would be nice, unfortunately -c is already used :-\
You can query packages before they are installed, you just have to point it to a file with -Qcp.
The file must be local, which means downloading it first.
[fp@oscar ~]$ pacman -Qcp `sudo pacman -Sup|grep -e ^http`
error: package "http://mirrors.gigenet.com/archlinux/core/os/i686/dhcpcd-4.0.10-1-i686.pkg.tar.gz" not found

SLD information about kernel level

Similar Messages

Maybe you are looking for