Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • Installation Error "Could not determine information about file system"

    Hi, i get the following error trying to install ABAP central instance on windows server 2003 enterprise edition. I am trying to do a local installation.
    Anybody have any ideas what i am doing wrong?
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:40
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\q0w9e9r8t7.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Copying file C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.xml to: C:/Program Files/sapinst_instdir/NW04/SYSTEM/ABAP/ORA/UC/CI/keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\keydb.1.xml.
    INFO 2007-05-13 23:50:41
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\change.log.
    INFO 2007-05-13 23:50:42
    Output of change user /install is written to the logfile change.log.
    WARNING 2007-05-13 23:50:42
    Execution of the command "change user /install" finished with return code 1. Output: Install mode does not apply to a Terminal server configured for remote administration.
    INFO 2007-05-13 23:50:42
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'ENTERPRISE\Administrator' on host '.'.
    INFO 2007-05-13 23:50:42
    Creating file C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI\summary.html.
    PHASE 2007-05-13 23:50:42
    Prepare the installation program.
    INFO 2007-05-13 23:50:49
    Installation start: Sunday, 13 May 2007, 23:50:39; installation directory: C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\UC\CI; product to be installed: SAP NetWeaver '04 SR1> SAP System Installation> ABAP System> Oracle> Unicode> Central Instance Installation
    INFO 2007-05-13 23:50:50
    Host operation t_HostInfo_SHARED processed successfully.
    ERROR 2007-05-13 23:55:28
    FSL-02107  Path component contains reserved character (':'): C:
    ERROR 2007-05-13 23:55:28
    FSL-02106  Path contains reserved character (':'):
    C:
    SAP
    ERROR 2007-05-13 23:55:28
    MOS-01236  Could not determine information about file system enterprise:, mounted at unknown.
    WARNING 2007-05-13 23:55:28
    The step GetMountInfo with step key SAPSYSTEM_CI|ind|ind|ind|ind|ind|0|SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo was executed with status ERROR.

    Hi.. Philip...
    During installation when it prompts / gives us to  type / Browse the installtion sources like installation master / ker cd's / installation export .......,
    What did you do ?
    did you browse to the respective directory ??
    or
    did you manually type ??
    I got the same problem on unix like. On oversight instead of browsing i typed manually and by mistake in one of the path i added space in one of the installation source path and installation ended with not able to locate file system error.
    if you have typed it manually .. i beleive it could be similar to this ??
    Update your reply
    Rgds
    PR

  • Jdev11g could not extract the archive since it is corrupted error code = 50

    Dears,
    Please I need a help
    After I downloaded Jdeveloper 11g and I begun to run the EXE it gaved me this error
    "could not extract the archive since it is corrupted error code = 50"
    I downloaded it again the next day but with the same error and the same problem.
    Could anybody know this issue ???? how to fix it ???
    Thanks in advance ....
    Samy Omar

    Do you run a virus checker or some program to scan the web traffic?
    Some of them are trying to check every file inside the jars or exe and if they contain more then 65536 file they corrupt the file without saying so.
    So try to download if running such programs or try it at an other location.
    Timo

  • What causes "Could not complete your request because of a program error"?

    I am trying to edit some pictures from a recent shoot and every time I try to open one a message pops up saying, " Could not complete your request because of a program error." What does this mean and how do I fix it?

    Welcome to this forum!
    I’m happy to help but can do a better job if I have more information about your situation.
    What version of Photoshop do you have?
    What is the make and model of the camera you used for the shoot?
    Could you also include a screenshot of your entire screen as the error message pops up? To include a screenshot in your post, click the word “Reply” below the post you’re reading right now and then click the camera picture to embed the image.

  • Best way to change from Oracle 11gR2 Standard Edition to Standard one..?

    Hi,
    I have installed Oracle 11gR2 Standard edition+ installed database and additional software (which looks into the Oracle 11g database) in around 20 PCs (company)
    But now the management says that they got license only for 11g Standard one edition (Standard one is significantly cheaper than standard edition)
    So I have to change the Oracle edition from Standard to Standard one now..We only need standard one edition features in the PCs.
    Can somebody please advise what would be the best way to do this? Do I have to uninstall all database and reinstall standard one edition again?
    I will be grateful if somebody says some kind of upgrade is possible(in this case degrade!)..
    Pls ..waiting for a reply..its very urgent!
    Thanks&regards..

    Yes I agree there was standard and standard one options and I selected standard.
    But how to confirm?
    SQL> select banner from v$version;
    BANNER
    Oracle Database 11g Release 11.2.0.1.0 - Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    It doesnt say anything..where else will I check?
    Also as said in the previous post,
    1) SE max. 4 sockets , SE1 2 sockets <======== hardware restriction
    2) No RAC on SE1
    3) No Automatic Workload Management (a RAC feature) on SE1
    These apply to us.
    So can we get a SE1 license, since we are not on RAC and satisfy all criteria for standard one.
    Thanks&Regards

  • Could not load rented video on new Nano.  Error code - 0xE00002BE

    I could not load a rented movie on my new Nano. I was able to load another movie however not this one (Her Best Move). Error code given was 0xE00002BE. Plenty of space available.

    I'm having the same problem. Any luck resolving the issue?

  • When I open itunes, itunes could not connect to the itunes store with unknown error code Ox80090318 although I am connected to internet

    My Windows 8.1 laptop is connected with internet. However, when I open itunes, I got the message:
    itunes could not connect to the itunes store. An unknow error occurred (Ox80090318). Make sure your network connection is active and try again.
    No matter how I try, the message keeps on coming back and itunes will not connect itune store.
    Can someone tell me why please.

    Hello yukgmn,
    To troubleshoot the error 0x80090318 in the iTunes Store, please follow the steps in the article linked to below.
    Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Could not synchronize color settings because of a program error.

    First, let me preface this by saying that I have several identical workstations that are all imaged from a single master.
    On the master, I configured Bridge to synchronize color settings across my Creative Suite apps.  This works on the Master but on every machine I've imaged from the Master I get a "Could not synchronize color settings because of a program error" when I launch Photoshop.
    Is there a way to stop the error?
    Thanks in advance,
    hp

    I have my machines setup this way to make preference/setting management/deployment easier.
    Yes, I can understand that and as said, I have a single set up.
    But in normal set up you install the suite at system level Application folder and use it from the dedicated user account(s) on that machine. All preferences and custom settings for Adobe (at least that I know of) are stored in the user library ( User/ library / Application Support / Adobe / and then per app presets - and same library / preferences / Adobe and many settings folders)
    Color sync and custom color profiles you have added are stored in the system library while the saved custom color setting you have created in one of the CS6 apps for use of color settings synchronization is in its turn again stored on user level library (user/ library / application support / Adobe/ Color / Settings) and inhere should be the custom name .csf file you have saved and should be able to find back in the list showing in Bridge when asking for color settings sync.
    I really doubt (but as said, no experience in it) imaging the systems is the correct procedure. I'm not sure what settings you want to pre set but mostly they are found in the user lib app support and user lib pref folder (for PS actions, workspaces, custom brushes etc etc.)
    And if you are using it for education it is a very good idea to learn all user that there is such thing as a preference command that offer you options to customize the application to your wishes. I can't yell enough about that because PS has a very pre historic default preference settings that needs changing for better use of the app. And the default workspace of Bridge is very clumsy and very unattractive, so the more people learn how to change that themselves the better it will be for making it more popular...

  • RMAN-06403: could not obtain a fully authorized session

    Hi,
    I am trying to duplicate 10204 instance with ASM to clone machine .
    I have checked that i can connect to the target / aux / rman instances before runing the duplicate script as you can see bellow.
    Also i checked that the Env. variable are correct :
    $ ps -ef | grep pmon
    oracle    5157     1  0 Feb16 ?        00:00:17 asm_pmon_+ASM
    oracle   30838     1  0 17:15 ?        00:00:00 ora_pmon_b3dev
    $ echo $ORACLE_HOME
    /software/oracle/B3DEV10gR2
    $ echo $ORACLE_SID
    b3dev
    -- AUX
    $ sqlplus sys/xxxx@b3dev as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:25 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    -- TARGET
    $ sqlplus sysxxxx@MYB3PROD as sysdba                  
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:44 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    -- catalog
    $ sqlplus catman_b3prd/xxxxx@rman
    SQL*Plus: Release 10.2.0.4.0 - Production on Sun Nov 21 17:01:59 2010
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing optionsI opened the AUX instance in NOMOUNT mode , and then run the rman script.
    rman TARGET sys/xxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
    RMAN>
    run
    allocate channel 'dev_0' type 'sbt_tape'
    parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=b3prd,OB2BARLIST=b3prd)' maxopenfiles 16;
    set until time "to_date('17-11-2010 10:45:00','dd-mm-yyyy hh24:mi:ss')";
    duplicate target database to b3dev
    PFILE = /software/oracle/B3DEV10gR2/dbs/initb3dev.ora
    NOFILENAMECHECK;
    }Then I got the following error:
    Starting Duplicate Db at 21-NOV-10
    released channel: dev_0
    released channel: dev_1
    released channel: dev_2
    released channel: dev_3
    released channel: dev_4
    released channel: dev_5
    released channel: dev_6
    released channel: dev_7
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 11/21/2010 17:14:20
    RMAN-06403: could not obtain a fully authorized session
    RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not availableThanks

    Thanks ,
    But its not seems to be my case:
    SQL> startup nomount pfile='initb3dev.ora';
    ORACLE instance started.
    Total System Global Area 1073741824 bytes
    Fixed Size                  1271616 bytes
    Variable Size             301992128 bytes
    Database Buffers          763363328 bytes
    Redo Buffers                7114752 bytesrman TARGET sys/xxxxx@MYB3PROD CATALOG catman_b3prd/xxxx@rman AUXILIARY sys/xxxx@b3dev
    Recovery Manager: Release 10.2.0.4.0 - Production on Sun Nov 21 17:34:27 2010
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    connected to target database: B3PRD (DBID=3967311322)
    connected to recovery catalog database
    connected to auxiliary database (not started)
    No problem to connect using sqlplus with @ .
    No problem to connect with RMAN , to target/AXU/RMAN catalog
    Yet , i am still getting the error message
    Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

    Hi
    I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
    Ramanbir S

    You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

  • I changed my primary email address because I could not access my old email and now my new iphone asks me to sign in to my old account in order to backup my apps and music from my icloud

    I changed my primary email address because I could not access my old email and now my new iphone asks me to sign in to my old account in order to backup my apps and music from my icloud. when I try to sign in using my password it says it is the wrong password.

    If you are only updating apps, that's normal  Apps and other purchased media are permanently tied to the ID used to purchase them.  You also don't back up apps or music to iCloud, the only thing backed up to iCloud is your app data, which is part of your iCloud backup by default.
    Is your phone signed into the old ID in Settings>iCloud?

  • Changing from CS6 Design standard to CS6 Design & Web Premium

    Is it possible to change from CS6 Design standard to CS6 Design & Web Premium?

    You will have to contact Adobe Support to see if that is possible.  It likely depends on how long you have owned the product.
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Get chat help with orders, refunds, and exchanges (non-CC)
    http://helpx.adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  • Standard cost estimate could not be found for the material

    Dear All,
    We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
    Please give me suggestion.
    Your suggestion should be appreciate.
    Thanks in advance............
    AND
    My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
    please let me know how to do........

    Hai
    Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you  need to make configuration  in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
    Pushkala

  • How to solve the error:  "lightroom could not import this catalog because of an unknown error" when trying to "import from catalog"?

    I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
    I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!! 
    Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?

    OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
    If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
    If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
    So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
    John

Maybe you are looking for