SLD webservice to get Business system details

Hi,
Is there a standard SAP provided webservice in SLD with which i can read all the properties of a business system?
My scenario is like below:
I have the logical system name with me in an external system, i need to resolve the details regarding the logical system from the business system details in the SLD.
Thanks & Regards,
Renjith John Andrews

Hi VJ,
Thank you very much for your response.
Actually i had seen the FM from inside SLDCHECK on the backend system.
However, the scenario that i am in - is that i need this information on a different system altogether which is java based.
Also, I have seen other forum posts which have pointed out to use CIM java APIs to read SLD details.
I was hoping that SAP has supplied a standard service so that i can avoid the usage of the APIs directly in my coding and use an SAP published service.
Regards,
Renjith John Andrews

Similar Messages

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, I created Business system in SLD. How to get them in Integration Directory.Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

SLD - Export Business System: 404 Not found while downloading ZIP-File

Hi, well we did a complete export of SLD to another XI-System. This worked fine so far except that one business System was not properly "installed" in SLD.
Therefore we want to export this single business system via option "Export" but we receive an 404 Error: The requested resource does not exist. when trying to download the given zip-file!
I read in OSS that this error occurs in XI-systems with SP <12 and SAP suggest to upgrade to 12
Well that's not an appropriate solution!
Does somebody can help how we can download this zip-file with the business system in it?!
Or is there some workaround i am not familiar with?!
Thx in advance!

Ok Prateek,
we had two same Technical Systems with two differnet hosts given in the SLD of DEV & PROD System.
After decision to devide both systems, means to seperate SLDs we copied the whole SLD from DEV to PROD. So there were some conflict with this two technical systems because during import of CIM-Data the business systems got switched up.
Therefore we thought we have to export the business system given in DEV SLD to import this business system in PROD SLD. But the workaround is that we simply assign the wrong imported business system to the right technical system (in PROD SLD)
That's it! br

Business service is not working in sender side but business system is working soap to idoc but why like that

i have scenario SOAP to IDOC
when i'm using business service in sender side it is getting an error as follows
sender message can not convert to ALE Logical system
in this i'm using altova spy as testing tool
my sender interface is asynchronous
but when i'm using business system everything is working fine
In sender side i'm using soap adapter,i checked the logical system everything is fine
mainly the problem is why it is working when i'm using business system rather than business service
my pi version is pi 7.0
thanks in advance
regards
satish

Hi Satish,
You are sending IDOC's to SAP system right. we should create Business system not business service.
so we should create the business system as web AS ABAP in SLD and import the same in ID.
When we create the business system in SLD the logical system name is assigned for the business system. like SAPCLNT100...It plays a key role in IDOC scenarios.
sender message can not convert to ALE Logical system
Reasons for this issue is
1) logical system name is unable to read from SLD for that corresponding business system.
Goto business system click on Adapter specific identifiers from the menu --> read from SLD.
it will automatically fetch the logical system name from the SLD.
2) Sometimes the logical system name will be deleted from the business system in SLD.
Delete the business system and re-create it, and follow the above procedure.it will resolve your issue.
Regards
Bhargava Krishna

Integrated Business Systems

Hi All,
What is the significance of the 'Integrated Business Systems' option in the SLD under Business System. I hav a scenario File -> XI -> IDOC. i have 3 independant scenarios of the same kind.
Scenario1:
BuisnessSystem1(DELVRY03) -> XI -> Dev
BusinessSystem2(WMMBIDO2) -> XI -> Dev
BusinessSystem3(WMMBXY) -> XI -> Dev
In my Dev, only one partner profile has been created.It looks like
XILogicalSys(Logical System of XI)
Inbound parameters:
DELVRY03
WMMBIDO2
WMMBXY
When i checked my XIBusinessSystem (XILogicalSys is the logical system name for the same) in SLD, under the Integrated Business Systems, my BusinessSystem1,BusinessSystem2,BusinessSystem3 are listed. but for all my BusinessSystem1,BusinessSystem2,BusinessSystem3 no logical system name was given. when i pushed the IDoc from XI, I'm getting the most common error Unable to convert sender service to an ALE logical system.
I have seen in some posts that logica system names for BusinessSystem1,BusinessSystem2,BusinessSystem3 have to be created and for the same logica system names the partner profiles have to be created in Dev. But is it the right way to create a partner profile for each individual business system? then, why is the option Integrated Business Systems under the XIBusinessSystem in the SLD is listing all the Business Systems BusinessSystem1,BusinessSystem2,BusinessSystem3?
Can anyone help me in this regard?
Any help wud b gr8ly appreciated.
Thnx in Advance
Anil

Hi Anil,
There are couple of Technical solutions for your problem.
Option 1.
Give LS name (as given for partner profile in SAPR/3) for any one of the business system.
Use this Business system in Reciever agrement as sender service in rest of 2 scenarios.
Option2: Create one business service and attach desired logical system name and use in all 3 scenario.
You cannot have same logical systemname for more than one business system and import to same XI Box.
Option 3: Create a common Business system(other than mentioned Business system) and attach LS name to it and use this common Business system in reciever agreement of all scenarios want to post IDOCo said partner profile.
I feel 'Integrated Business Systems' is the list of business system using common Related Integration Server.
Hope it helps.
Regards,
Satish Chauhan

Unable to create New Business System

Hi
I Installed XI 3.0 and configuring as per the configuration guide.
When I try to create Business System (SLD) I get the following error message.
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Steps:
Logon on to SLD
Click on New Business System
Name: XID and click on Next
Technical System Type: Web AS for ABAP
Select System: XID on Hostname   and select Client
Installed products: Choose all and click Nextt
Integration Server:
Business System Role: Integration Server
Pipeline url: http://HOST:PORT/sap/xi/engine/entry?action=execute
Initially I created Business System with wrong Name (P01) . I deleted it and try to recreate with new name (XID) I get the above error.
How to create a Business system and assign the role of Integration Server?
Thanks for the Help
Raghu

Hi RG,
      Once we had   same error ,due to some reason business system with role integration server deleted.
       It has been resolved by deleting XI technical system and recreating same after that it allows to define new bussiness system with role as integration server .
It might help you.
Regards
Santosh

Business system - inbound interface issue

Hello,
I have created a business system in SLD and assigned required SWCV in installed products tab.now i imported that business system in to ID.
But in my business system i am not able to find the inbound interfaces of perticular SWCV. (able to see some other i/b and o/b interfaces)
i have configured SLD perfectly. ( in business system -installed products tab i have assigned the SWCV and product and check box was ticked). but the same SWCV and it's interfaces are not reflecting at the ID>business system.
now this business system is using in so many interfaces. so i can't reimport again. So kindly suggest how can i get the inbound interfaces to my business system in ID.
Thanks in advance.......SARAN

Hi,
Check Cache Overview to see if you are facing any problem,
also if you create the BS with the proper SWC, etc etc. and few days later you define a new SWC to this BS, you have to refresh the configuratio in the SLD-->I mean, go to BS and check if all SWC associated are selected. if not, select them and try again. this is important if you want to define a routing rule in the Receiver determination.
Now if you are in the ID and you cannot see directly services filtering by BS, dont care just change the filters to ANY ANY and you will see all services.
Hope Helps
Thanks
RP

How to change R/3 System ID & Client values for a Business System in ID

I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a place where these parameters are specified for that Business System in SLD.
Please help me!

I have a Client 500 and R3 Server EN3 now these two things were already there on a Business System, but Admn did some thing on my test system and now we have another Business System pointing to TS of type WEBAS-ABAP and Admin assigned this same client 500 and EN3 server name in SLD to this new Business system, but as you know these changes will not reflect in my ID scenario automatically unless we do it manually with synchronization button under Adapter Specific Identifiers.
So my requirement is now to remove those values from the old BS and keep them or get them through synch for my new BS in my ID scenario, which I am not able to do it. The new BS is pointing to WEBAS-ABAP type TS but the old one I think it is now not pointing to any TS any more, it just left like a orphan with no technical System, I think Admn did some magic with bad practice, I believe.
HOw do I handle this situation?

Related integration server in business system

Hi Gurus,
I am trying to create a business system of type WebAS ABAP , in the last step ( Integration Step ) i have selected
 Business System role : Application system
But in the Related integration server : drop down i am not getting any values .. what could be the reason . What should i do to get values ??

Hi,
In your SLD , is there a Business System that has been registered with the Role Integration Server? . You need to do this as a part of your post installation activities of XI and I think this is not done.
Once you create a Business System of role Integration Server you will then be able to find the option Related Integration Server with a value to be selected.
Regards
Bhavesh

Naming changes for SAP business systems

Hello
I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
Thanks in advance.
Regards
Rajeev Patkie

Hi Rajeev,
The Business system details like the client and logical system etc, help the proxy to know where it has to go.
Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
Also you sender XI adapter is attched to this Business system.
No what is your receiver? You haven't specified that?
Also, you can just reactivate the PROXY once.
Cache refresh??
Regards
Vijaya

SXI_CACHE error "ABAP business system = 7.10 and therefore has no cache"

Hello Community,
I'm running an ERP System with Basis 7.40 SP5 and a PI 7.4 SP6
When I try to make a Cache synchronization is transaction SXI_CACHE, I get the following error:
Thrown:
com.sap.aii.ib.core.abapcache.CacheRefreshException: Receiver <SID>_200_ERP is not an ABAP business system >= 7.10 and therefore has no cache
at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:115)
at com.sap.aii.ibdir.server.abapcache.content.CacheForBackend.addContent(CacheForBackend.java:106)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:637)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:280)
at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:161)
at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:172)
But the System is in the SLD in Version 7.40 and the Bussines System is assigned correctly.
It's seems to be a bug in the validation.
Does anyone knows a workaround for this situation?
Best regards
Bastian Gschrey

Hi Tomasz,
I solved the Problem by cleaning the SLD Cache in the Integration Builder.
This worked for me for 2 Systems.
For the third system, that had the problem, the solution was to delete it from SLD, cleaning SLD Cache in Integration Builder, re-register(rz70) the system in SLD and assign the Business System. After that the problem was solved in all systems.
Best regards
Bastian

Business System Vs Business Service

Hi,
When to use Business System and When to use Business Service?
Why the Business Services are not defined in the SLD?
regards
sai

Hello,
Business systems are logical senders or receivers that exchange messages by using the Integration Server and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape. The business systems of business partners are therefore not entered in the System Landscape Directory. To be able to address such business partners logically, use communication components in the Integration Directory. A business system is a way of specifying a communication component in the Integration Directory more precisely (business system component).
A business service represents an abstract unit for addressing message senders and message receivers. You can use a business service to group interfaces.
It is useful to use business services when configuring cross-company processes. Usually, the interface descriptions of the business partners involved are made publicly available. The system landscape is only partly known, however.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
BR,
Dzmitry

ABAP proxy client call PI with new client 120 in old business system

Hi all
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
Will it work or we need to do some extra configuration for communication channel.
Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
Thanks in Advance.

Hi Naina ,
We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
My question is If we go to the SLD and
|-> Click on Business System
|-> Add new client 120
> hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
Will it work or we need to do some extra configuration for communication channel.
> since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
For this check blog : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Abap proxies ( Client and Server proxies)
Other steps i.e Interface determination/receiver determination are as usual .
Regards ,

Business system Doesnot change while transporting

Hi All,
When Transporting my business system from DEV to QA, my business system doesnot change. I already checked in SLD that my DEV business system is pointing to the correct system in QA. Also DEV and QA are on one SLD only.
You guys will be highly appreciated.
Regards,
---Satish

You also have to make sure that the DEV/QAS Business Systems are associated to the respective DEV/QAS XI system. For that, open the BS in SLD, go to the "Integration" tab and check the "Related Integration Server".
Also, make sure that both the DEV BS & DEV XI are inside the same "DEV" transport group in SLD, as well as the QAS BS & QAS XI are both in the same "QAS" group.
Regards,
Henrique.

SLD webservice to get Business system details

Similar Messages

Maybe you are looking for