Sleeping Clients - WLC 7.6
We are running 7.6 on our 5508-WLC. We have a number of issues w/ 'i-clients' when they go asleep. From what I can tell, I need to enable the 'sleeping clients' feature (not just the session and idle timeouts).
On our WLANs we use Layer-2 (WPA+WPA2) security. Is my understanding correct, that to enable Sleeping Clients we need to also have layer-3 security enabled? If so - is there a way around that requirement?
On our WLANs we use Layer-2 (WPA+WPA2) security. Is my understanding correct, that to enable Sleeping Clients we need to also have layer-3 security enabled? If so - is there a way around that requirement?
Sleeping clients only works with WebAuth with no layer 2 encryption. If you are using a layer 2 encryption, it will not work as its not supported.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Similar Messages
-
WLC 7.5 Sleeping clients with ISE and Central WEB Auth(CWA)
Hi there,
Is it possibe to use sleeping clients when using ISE and CWA?
I was thinking of enabling layer3 auth with web auth on mac auth failure, but will that work with CWA?
Or is the only solution to use LWA?Controller-> General-> User Idle Timeout (seconds) = 50 000 sec.
And your users will be connected all this time even if they going in sleepmode
be carefull with CPU loading -
Idle/session timeout vs sleeping client
Hello,
We will soon upgrade to WLC from 7.4.110 to 7.6.120 and find out a new feature : spleeping client.
I was wondering the purpose of the sleeping client vs idle timeout/session timeout.
In our case we have an idle client set to 14400 seconds (4H) and session timeout set to 28880 (8H) for web-auth SSID. Thus, even if a laptop is sleeping for 3H it will still be authenticated as the idle timeout has not been reached.
Based on those facts, what will be the purpose of the sleeping client feature as it must be set higher than the session timeout ?
Thanks for your support :-).make sure that the session timeout is greater than the client idle timeout, otherwise the sleeping client entry would not be created.
After entering the appropriate login credentials for web-auth, the client get authenticated and moves to RUN state.
Now if the client configured is idle for 300 seconds (default idle timeout value) or disconnects from the WLAN it is connected to, then the client will move to sleeping clients.
Once the client is moved to the Sleeping Clients, the timeout session starts and the remaining time before the client entry is deleted/cleared is displayed.
If the client wakes up or joins back to the same WLAN, it doesn't require re-authentication.
the number of sleeping clients that are remembered has increased to 25000 from the previous 9000. A larger number of sleeping clients are remembered even after waking up, on the wireless network with high-scale Cisco WLCs. This eliminates the need for user intervention to re-enter credentials for a greater number of clients. -
Can sleeping clients just be on anchor controller 7.6
Can sleeping clients just be on anchor controller 7.6? Can the foreign controller not have sleeping clients configured and it still work as long as the anchor is configured for sleeping clients? The other question is.. Do all user use sleeping clients or only user who have actually web authed? We have a lot of people in webauth required state not sure if they count against the sleeping client count.
A sleeping client does not require reauthentication in the following scenarios:
Suppose there are two controllers in a mobility group. A client that is associated with one controller goes to sleep and then wakes up and gets associated with the other controller.
Suppose there are three controllers in a mobility group. A client that is associated with the second controller that is anchored to the first controller goes to sleep, wakes up, and gets associated with the third controller.
A client sleeps, wakes up and gets associated with the same or different export foreign controller that is anchored to the export anchor.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/config_guide/b_cg75/b_cg75_chapter_010111.html#concept_F70A46E44FFB41CA9C2A4FC60A81B0A2 -
Problem Concurent client WLC 5508
Hi All support,
i have running cisco wlc 5508 with software upgrade 7-4-100-0.aes and 24 cisco 1552 AP with mode mesh, concurent client only show 185 clients but if we using dual load wlc ( Whitout mobility group, if using mobility group clients still stuck concurent) clients can get online 150 on wlc01 and 130 on wlc02 ,total client we have is 300 client.for more information we using feature passive client on this network. any body can help ??
regards,
Sigit H.Wthis is debug iapp :
*iappSocketTask: Mar 18 11:13:09.419: [0480] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.419: [0496] 00 00 00 00 00 27 22 16 13 f9 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0512] 00 00 00 02 00 00 00 00 00 00 01 46 b8 17 01 00
*iappSocketTask: Mar 18 11:13:09.420: [0528] 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0544] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0560] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0576] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0592] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0608] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0624] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0640] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0656] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0672] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0688] 00 00 27 22 40 a8 81 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0704] 01 00 00 00 00 00 00 00 a8 b9 19 01 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0720] 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0736] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0752] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:09.420: [0768] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.785: IAPP Rx Frame (1633)
*iappSocketTask: Mar 18 11:13:10.785: [0000] d0 c2 82 e3 ae c4 2c 36 f8 73 e6 80 81 00 00 0b
*iappSocketTask: Mar 18 11:13:10.785: [0016] 08 00 45 00 05 cc d3 da 40 00 ff 11 28 8a 0a 9d
*iappSocketTask: Mar 18 11:13:10.785: [0032] 32 6d 0a 9d 32 15 3e 69 14 7f 05 b8 00 00 00 20
*iappSocketTask: Mar 18 11:13:10.785: [0048] 03 20 bb 9f 00 00 01 04 00 00 00 00 00 00 01 08
*iappSocketTask: Mar 18 11:13:10.785: [0064] 00 00 2c 36 f8 73 e6 80 2c 36 f8 73 e6 80 2c 36
*iappSocketTask: Mar 18 11:13:10.785: [0080] f8 73 e6 80 00 00 aa aa 03 00 40 96 00 00 06 03
*iappSocketTask: Mar 18 11:13:10.785: [0096] 32 8b 2c 36 f8 73 e6 80 2c 36 f8 73 e6 80 00 00
*iappSocketTask: Mar 18 11:13:10.785: [0112] 39 00 05 ed e1 cf 0a 30 08 00 00 27 22 40 a4 df
*iappSocketTask: Mar 18 11:13:10.785: [0128] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0144] 00 00 a0 05 00 00 00 00 00 0c 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0160] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0176] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0192] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0208] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0224] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0240] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0256] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0272] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0288] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0304] 00 00 00 00 00 00 00 00 27 22 84 89 30 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0320] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a3
*iappSocketTask: Mar 18 11:13:10.786: [0336] 06 00 00 00 00 00 18 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0352] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0368] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0384] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0400] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0416] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0432] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0448] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0464] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0480] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0496] 00 00 00 00 00 27 22 40 a8 57 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0512] 00 00 00 00 00 00 00 00 00 00 00 00 aa 0d 01 00
*iappSocketTask: Mar 18 11:13:10.786: [0528] 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0544] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0560] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0576] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0592] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0608] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0624] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0640] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0656] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0672] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0688] 00 00 27 22 2c a9 c6 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0704] 00 00 00 00 00 00 00 00 00 a2 06 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0720] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0736] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0752] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:10.786: [0768] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: IAPP Rx Frame (1633)
*iappSocketTask: Mar 18 11:13:12.554: [0000] d0 c2 82 e3 ae c4 2c 36 f8 73 04 20 81 00 00 0b
*iappSocketTask: Mar 18 11:13:12.554: [0016] 08 00 45 00 05 cc 00 50 40 00 ff 11 fc 17 0a 9d
*iappSocketTask: Mar 18 11:13:12.554: [0032] 32 6a 0a 9d 32 15 30 44 14 7f 05 b8 00 00 00 20
*iappSocketTask: Mar 18 11:13:12.554: [0048] 03 20 bb fa 00 00 01 04 00 00 00 00 00 00 01 08
*iappSocketTask: Mar 18 11:13:12.554: [0064] 00 00 2c 36 f8 73 04 20 2c 36 f8 73 04 20 2c 36
*iappSocketTask: Mar 18 11:13:12.554: [0080] f8 73 04 20 00 00 aa aa 03 00 40 96 00 00 06 03
*iappSocketTask: Mar 18 11:13:12.554: [0096] 32 8b 2c 36 f8 73 04 20 2c 36 f8 73 04 20 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0112] 39 00 05 ed 00 00 0a 30 08 00 00 27 22 40 a8 f0
*iappSocketTask: Mar 18 11:13:12.554: [0128] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0144] 00 00 b0 14 01 00 00 00 00 12 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0160] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0176] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0192] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0208] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0224] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0240] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0256] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0272] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0288] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0304] 00 00 00 00 00 00 00 00 27 22 16 a3 f7 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0320] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ad
*iappSocketTask: Mar 18 11:13:12.554: [0336] 10 01 00 00 00 00 24 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0352] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0368] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0384] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0400] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0416] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0432] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0448] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0464] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0480] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0496] 00 00 00 00 00 27 22 40 a9 37 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0512] 00 00 00 00 00 00 00 00 00 00 00 00 b1 13 01 00
*iappSocketTask: Mar 18 11:13:12.554: [0528] 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0544] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0560] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0576] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0592] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0608] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0624] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0640] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0656] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0672] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0688] 00 00 27 22 40 a9 fd 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0704] 00 00 00 00 00 00 00 00 00 b2 16 01 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0720] 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0736] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0752] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*iappSocketTask: Mar 18 11:13:12.554: [0768] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(Cisco Controller) >debug iapp all disable -
AFP inactive/sleeping clients not disconnecting
I have set clients to automatically disconnect after a certain amount of inactivity, or if they sleep, in Tiger server AFP services settings pane. Howerver, it seems nothing is ever being disconnected, as I've regularly got a list of clients that have been inactive or sleeping for hours still holding onto their connections. Every morning I have to manually kill all the inactive connections to allow users to log on again (as it seems the old connection is somehow preventing them from logging on again)...
help?
thanks
David HoareDo you have the server set to allow idle clients to auto-reconnect?
http://support.apple.com/kb/TA23219 -
7.5 web-auth client sleep timer feature
The 7.5 release advertises the ability to configure a timeout value so that guest clients which go to sleep are not re-prompted for web-auth. Does anyone know if 7.5 would only be required on the anchor WLC or must it also be on the foreign? We utilize web-auth for a guest WLAN and anchor it to a WLC in the DMZ. Preference would be to NOT load 7.5 on every WLC we have and only upgrade our guest anchor.
Thanks!
AnthonyHi Scott ( and all ),
I was making some tests with sleeping client with a infrastructure like this:
- 2 foreign ( 5508 ) with the APs and client association
- 2 anchor ( 4402 ) on the DMZ
- radius for client auth
From my understand the :
- clients are associated to the foreign but
- the authentication is forwarded to the anchor
( I can see the request on the radius with the anchor NAS IP address and, before the client is authenticated, i get the status as REQ_D state on the anchor )
So I suppose the sleeping client feature should be on the anchor ( or on both wontroller ) and not only on the foreign. I'm wrong ?
If You've some Idea to let it works with only sleeping config on the foreign i will solve one big issue because my anchors are 4402 without sleeping feature available.
All is working fine on the foreign if I remove the anchor configuration ( by the way, like this isn't anymore a foreign ) -
USB shared printer - client OS 9 - causes sleeping Mac Pro to Crash
Printer is a Brother 5140 shared Via USB -
Client networked to Shared Brother printer works fine if MacPro is "awake". But if MacPro sleeps client sending a job crashes the MacPro.
Any solutions other than setting MacPro NOT to Sleep?
ThanksTwo ways -
If you have a printer driver in Classic on OS X that is able to print, you can add the USB printer sharing Control Panel to Classic and turn it on to share the printer. You'd have to keep Classic running all the time, and there might be some conflict with OS X printing. ... OK, this one isn't a good option.
Second way. Go to Printer Setup and highlight the Brother and click Show Info. Write down the Queue Name. Go to Network Prefs and write down the OS X IP address, too.
On the OS 9 computer, find the Desktop Printer Utility and run it. Add a new LPD printer. Enter IP address, use an Apple LaserWriter PPD (or Color LaserWriter if the printer is color), enter the Queue Name where requested.
The concept is to send postscript to the OS X print queue, where it is translated and sent to the printer.
I've done this successfully several times, including one with a Brother HL2040 printer.
Good luck. -
Clients disconnect because of Capabilites change
Hi all,
recently we migrated AIR-LAP1131AG APs from a 4402 WLC running 4.1.185.0 release to a 5508 running 7.6.130.0. After we did that some clients constantly disconnected and reconnected. I strongly assume it has something to do with the additional features that were introduced between the releases.
During debugging I saw that after the client entered the RUN state that it got disconnected with the following error:
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Association Failed on REAP AP BSSID yy:yy:yy:yy:yy:yy (slot 0), status 1 0 Capabilities changed
Here is the whole debug output (X is the client, Y is the AP, Z are other APs for the group key)
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Adding mobile on LWAPP AP yy:yy:yy:yy:yy:yy(0)
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Association received from mobile on BSSID yy:yy:yy:yy:yy:yy
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Global 200 Clients are allowed to AP radio
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Max Client Trap Threshold: 0 cur: 0
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx override for default ap group, marking intgrp NULL
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Re-applying interface policy for client
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx In processSsidIE:4850 setting Central switched to FALSE
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Applying site-specific Local Bridging override for station xx:xx:xx:xx:xx:xx - vapId 5, site 'default-group', interface 'irglbxv'
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Applying Local Bridging Interface Policy for station xx:xx:xx:xx:xx:xx - vlan 14, interface id 14, interface 'irglbxv'
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0 0 0 0 0 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx STA - rates (12): 2 4 11 22 12 18 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Processing RSN IE type 48, length 20 for mobile xx:xx:xx:xx:xx:xx
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Updating AID for REAP AP Client yy:yy:yy:yy:yy:yy - AID ===> 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Encryption policy is set to 0x80000001
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Central switch is FALSE
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Sending Local Switch flag = 1
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) DHCP required on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5for this client
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Not Using WMM Compliance code qosCap 00
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5 flex-acl-name:
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfMsAssoStateInc
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfPemAddUser2 (apf_policy.c:333) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Idle to Associated
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfPemAddUser2:session timeout forstation xx:xx:xx:xx:xx:xx - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Sending Assoc Response to station on BSSID zz:zz:zz:zz:zz:zz (status 0) ApVapId 5 Slot 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Associated to Associated
*spamApTask0: Mar 31 01:57:17.708: xx:xx:xx:xx:xx:xx Sent 1x initiate message to multi thread task for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.708: xx:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station xx:xx:xx:xx:xx:xx (RSN 2)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Resetting MSCB PMK Cache Entry 0 for station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Setting active key cache index 8 ---> 8
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Adding BSSID yy:yy:yy:yy:yy:yy to PMKID cache at index 0 for station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: New PMKID: (16)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: [0000] 95 e5 c8 10 ba cc 57 e5 1d 4c ab ae c3 eb 0c f5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Initiating RSN PSK to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx EAP-PARAM Debug - eap-params for Wlan-Id :5 is disabled - applying Global eap timers and retries
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx dot1x - moving mobile xx:xx:xx:xx:xx:xx into Force Auth state
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Skipping EAP-Success to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx EAPOL Header:
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: 00000000: 02 03 00 5f ..._
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: [0000] 95 e5 c8 10 ba cc 57 e5 1d 4c ab ae c3 eb 0c f5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Starting key exchange to mobile xx:xx:xx:xx:xx:xx, data packets will be dropped
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Allocating EAP Pkt for retransmission to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:01 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx mscb->apfMsBssid = yy:yy:yy:yy:yy:yy mscb->apfMsAddress = xx:xx:xx:xx:xx:xx mscb->apfMsApVapId = 5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = 171969037
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 173667675 mscb->apfMsLwappLradPort = 23341
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Received EAPOL-Key from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Received EAPOL-key in PTK_START state (message 2) from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Stopping retransmission timer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx EAPOL Header:
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: 00000000: 02 03 00 5f ..._
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Reusing allocated memory for EAP Pkt for retransmission to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:01 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx mscb->apfMsBssid = yy:yy:yy:yy:yy:yy mscb->apfMsAddress = xx:xx:xx:xx:xx:xx mscb->apfMsApVapId = 5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.793: xx:xx:xx:xx:xx:xx dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = 171969037
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.793: xx:xx:xx:xx:xx:xx mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 173667675 mscb->apfMsLwappLradPort = 23341
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Received EAPOL-Key from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Stopping retransmission timer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Freeing EAP Retransmit Bufer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx apfMs1xStateInc
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Central switch is FALSE
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Sending the Central Auth Info
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Central Auth Info Allocated PMKLen = 32
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx PMK: pmkActiveIndex = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 apfMsEapType = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Sending Local Switch flag = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) DHCP required on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5for this client
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5 flex-acl-name:
*spamApTask0: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 pmkLen = 32
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 6178, Adding TMP rule
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP yy:yy:yy:yy:yy:yy, slot 0, interface = 1, QOS = 0
IPv4 ACL ID = 255, IPv
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206 Local Bridging Vlan = 14, Local Bridging intf id = 14
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*pemReceiveTask: Mar 31 01:57:17.900: xx:xx:xx:xx:xx:xx 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx Orphan Packet from STA - IP 10.89.246.63
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx apfMsRunStateInc
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx 10.89.246.63 DHCP_REQD (7) Change state to RUN (20) last state DHCP_REQD (7)
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx Assigning Address 10.89.246.63 to mobile
*pemReceiveTask: Mar 31 01:57:18.905: xx:xx:xx:xx:xx:xx 10.89.246.63 Removed NPU entry.
*dot1xMsgTask: Mar 31 01:57:19.863: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 0 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:19.863: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 1
*dot1xMsgTask: Mar 31 01:57:19.863: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:19.863: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.863: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 2
*dot1xMsgTask: Mar 31 01:57:19.863: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 3
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 4
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 5
*dot1xMsgTask: Mar 31 01:57:19.865: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*mmMaListen: Mar 31 01:57:20.863: xx:xx:xx:xx:xx:xx 10.89.246.63 RUN (20) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*mmMaListen: Mar 31 01:57:20.863: xx:xx:xx:xx:xx:xx 10.89.246.63 RUN (20) Reached PLUMBFASTPATH: from line 5850
*dot1xMsgTask: Mar 31 01:57:21.263: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 0 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 1
*dot1xMsgTask: Mar 31 01:57:21.263: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 2
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 3
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 4
*dot1xMsgTask: Mar 31 01:57:21.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 5
*dot1xMsgTask: Mar 31 01:57:21.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Association Failed on REAP AP BSSID yy:yy:yy:yy:yy:yy (slot 0), status 1 0 Capabilities changed
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason 8, reasonCode 1
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Scheduling deletion of Mobile Station: (callerId: 30) in 1 seconds
*osapiBsnTimer: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Associated to Disassociated
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Sent Deauthenticate to mobile on BSSID yy:yy:yy:yy:yy:yy slot 0(caller apf_ms.c:6749)
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Removing BSSID yy:yy:yy:yy:yy:yy from PMKID cache of station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Resetting MSCB PMK Cache Entry 0 for station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Setting active key cache index 0 ---> 8
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Deleting the PMK cache when de-authenticating the client.
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Global PMK Cache deletion failed.
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsAssoStateDec
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireMobileStation (apf_ms.c:6787) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Disassociated to Idle
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Mar 31 01:57:28.464: xx:xx:xx:xx:xx:xx 10.89.246.63 START (0) Deleted mobile LWAPP rule on AP [yy:yy:yy:yy:yy:yy]
*apfReceiveTask: Mar 31 01:57:28.464: xx:xx:xx:xx:xx:xx Deleting mobile on AP yy:yy:yy:yy:yy:yy(0)
*dot1xMsgTask: Mar 31 01:57:30.263: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 1 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 1
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 2
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 3
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 4
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 5
*dot1xMsgTask: Mar 31 01:57:30.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
Here is the configuration of the SSID on the 4402 and 5508 for comparison.
4402
WLAN Identifier.................................. 2
Profile Name..................................... xxxxx
Network Name (SSID).............................. xxxxx
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. Infinity
Interface........................................ xxxxxx
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Quality of Service............................... Silver (best effort)
WMM.............................................. Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Radio Policy..................................... All
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Disabled
WPA2 (RSN IE).............................. Disabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
CKIP ......................................... Disabled
IP Security................................... Disabled
IP Security Passthru.......................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Auto Anchor................................... Disabled
Cranite Passthru.............................. Disabled
Fortress Passthru............................. Disabled
H-REAP Local Switching........................ Disabled
Infrastructure MFP protection................. Enabled (Global Infrastructure MFP Disabled)
Client MFP.................................... Optional but inactive (WPA2 not configured)
Tkip MIC Countermeasure Hold-down Timer....... 60
Mobility Anchor List
WLAN ID IP Address Status
5508
WLAN Identifier.................................. 5
Profile Name..................................... xxxxx
Network Name (SSID).............................. xxxxx
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 3
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... xxxxxxxx
CHD per WLAN..................................... Disabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ xxxxxxxx
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Disabled
WPA2 (RSN IE).............................. Disabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Disabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Does anybody have an idea where else I could look at?
Regards,
PatrickI thought the same that those devices simply are too old. However I would like to know what causes this capabilities change. We want to get rid of the old H/W, but at the moment it looks as if we would need to revert back to the 4402 in order to get those things working again.
I have not enough information, but those devices are some kind of handhelds. Their MAC OUI belongs to Newport Electronics.
Regards,
Patrick -
Cisco ISE 1.2 & Cisco WLC 5508 v7.6
Hi all,
we are planning to upgrade our WLC to 7.6 to fix a bug with FlexConnect Client ACLs but I have just seen on the Cisco ISE Compatibility table that the it only recommends up to v7.5 of the WLC 5508...
Cisco have told me to steer clear of 7.5 as it is in a defferred status, so does anyone know, or have running in a lab or production, ISE1.2 with a 5508 WLC v7.6 NAD ?
I would much rather know of any issues people are experiencing before hand than to have to go through a software upgrade and then rollback.
Thanks all
Mario De RosaHi Neno,
right I have this almost working now.
I have simplified the setup. I am not going to do any client provisioning at the moment.
So I can connect to the corporate SSID using EAP-TLS and I can successfully push the branch data VLAN upon successful authorisation.
Now I am trying to introduce the posture element & per user ACLs.
I have defined the redirect ACL & Flex ACL on the vWLC however the NAC agent will not pop-up. The client is in the right VLAN and the redirect ACL seems to be getting applied as the client does get an IP through DHCP. However, the client cannot ping the ISE or access the guest portal when I open the browser.
DNS resolution seems to be working fine.
VLAN220 is my datacentre VLAN which the Management Interface on the controller is plugged in to.
VLAN10 is the branch DATA VLAN.
below is some output to give you some more details...
(Cisco Controller) >show client detail 00:24:d6:97:b3:be
Client MAC Address............................... 00:24:d6:97:b3:be
Client Username ................................. [email protected]
AP MAC Address................................... 18:33:9d:f0:21:80
AP Name.......................................... test-flex-ap
AP radio slot Id................................. 0
Client State..................................... Associated
Client NAC OOB State............................. Access
Wireless LAN Id.................................. 2
Hotspot (802.11u)................................ Not Supported
BSSID............................................ 18:33:9d:f0:21:81
Connected For ................................... 128 secs
Channel.......................................... 6
IP Address....................................... 10.130.130.120
Gateway Address.................................. 10.130.130.1
Netmask.......................................... 255.255.255.0
IPv6 Address..................................... fe80::f524:1910:69f0:9482
Association Id................................... 1
Authentication Algorithm......................... Open System
Reason Code...................................... 1
Status Code...................................... 0
Client CCX version............................... 4
Client E2E version............................... 1
--More-- or (q)uit
Re-Authentication Timeout........................ 1651
QoS Level........................................ Silver
Avg data Rate.................................... 0
Burst data Rate.................................. 0
Avg Real time data Rate.......................... 0
Burst Real Time data Rate........................ 0
802.1P Priority Tag.............................. disabled
CTS Security Group Tag........................... Not Applicable
KTS CAC Capability............................... No
WMM Support...................................... Enabled
APSD ACs....................................... BK BE VI VO
Power Save....................................... OFF
Current Rate..................................... m13
Supported Rates.................................. 1.0,2.0,5.5,11.0,6.0,9.0,
............................................. 12.0,18.0,24.0,36.0,48.0,
............................................. 54.0
Mobility State................................... Local
Mobility Move Count.............................. 0
Security Policy Completed........................ No
Policy Manager State............................. POSTURE_REQD
Policy Manager Rule Created...................... Yes
AAA Override ACL Name............................ POSTURE_REDIRECT_ACL
AAA Override ACL Applied Status.................. Yes
--More-- or (q)uit
AAA Override Flex ACL Name....................... POSTURE_REDIRECT_ACL
AAA Override Flex ACL Applied Status............. Yes
AAA URL redirect................................. https://pdc-ise-man01.kier.group:8443/guestportal/gateway?sessionId=c8dc800a00000005b3e7e953&action=cpp
Audit Session ID................................. c8dc800a00000005b3e7e953
AAA Role Type.................................... none
Local Policy Applied............................. none
IPv4 ACL Name.................................... none
FlexConnect ACL Applied Status................... Yes
IPv4 ACL Applied Status.......................... Unavailable
IPv6 ACL Name.................................... none
IPv6 ACL Applied Status.......................... Unavailable
Layer2 ACL Name.................................. none
Layer2 ACL Applied Status........................ Unavailable
mDNS Status...................................... Disabled
mDNS Profile Name................................ none
No. of mDNS Services Advertised.................. 0
Policy Type...................................... WPA2
Authentication Key Management.................... 802.1x
Encryption Cipher................................ CCMP (AES)
Protected Management Frame ...................... No
Management Frame Protection...................... No
EAP Type......................................... EAP-TLS
FlexConnect Data Switching....................... Local
--More-- or (q)uit
FlexConnect Dhcp Status.......................... Local
FlexConnect Vlan Based Central Switching......... No
FlexConnect Authentication....................... Central
Quarantine VLAN.................................. 0
Access VLAN...................................... 220
Client Capabilities:
CF Pollable................................ Not implemented
CF Poll Request............................ Not implemented
Short Preamble............................. Implemented
PBCC....................................... Not implemented
Channel Agility............................ Not implemented
Listen Interval............................ 10
Fast BSS Transition........................ Not implemented
Client Wifi Direct Capabilities:
WFD capable................................ No
Manged WFD capable......................... No
Cross Connection Capable................... No
Support Concurrent Operation............... No
Fast BSS Transition Details:
Client Statistics:
Number of Bytes Received................... 33698
Number of Bytes Sent....................... 19397
Total Number of Bytes Sent................. 19397
--More-- or (q)uit
Total Number of Bytes Recv................. 33698
Number of Bytes Sent (last 90s)............ 19397
Number of Bytes Recv (last 90s)............ 33698
Number of Packets Received................. 283
Number of Packets Sent..................... 147
Number of Interim-Update Sent.............. 0
Number of EAP Id Request Msg Timeouts...... 0
Number of EAP Id Request Msg Failures...... 0
Number of EAP Request Msg Timeouts......... 0
Number of EAP Request Msg Failures......... 0
Number of EAP Key Msg Timeouts............. 0
Number of EAP Key Msg Failures............. 0
Number of Data Retries..................... 53
Number of RTS Retries...................... 0
Number of Duplicate Received Packets....... 2
Number of Decrypt Failed Packets........... 0
Number of Mic Failured Packets............. 0
Number of Mic Missing Packets.............. 0
Number of RA Packets Dropped............... 0
Number of Policy Errors.................... 0
Radio Signal Strength Indicator............ -42 dBm
Signal to Noise Ratio...................... 41 dB
Client Rate Limiting Statistics:
--More-- or (q)uit
Number of Data Packets Recieved............ 0
Number of Data Rx Packets Dropped.......... 0
Number of Data Bytes Recieved.............. 0
Number of Data Rx Bytes Dropped............ 0
Number of Realtime Packets Recieved........ 0
Number of Realtime Rx Packets Dropped...... 0
Number of Realtime Bytes Recieved.......... 0
Number of Realtime Rx Bytes Dropped........ 0
Number of Data Packets Sent................ 0
Number of Data Tx Packets Dropped.......... 0
Number of Data Bytes Sent.................. 0
Number of Data Tx Bytes Dropped............ 0
Number of Realtime Packets Sent............ 0
Number of Realtime Tx Packets Dropped...... 0
Number of Realtime Bytes Sent.............. 0
Number of Realtime Tx Bytes Dropped........ 0
Nearby AP Statistics:
test-flex-ap(slot 0)
antenna0: 14 secs ago.................... -51 dBm
antenna1: 14 secs ago.................... -37 dBm
test-flex-ap(slot 1)
antenna0: 14 secs ago.................... -51 dBm
antenna1: 14 secs ago.................... -54 dBm
--More-- or (q)uit
DNS Server details:
DNS server IP ............................. 10.0.17.31
DNS server IP ............................. 10.0.17.43
Assisted Roaming Prediction List details:
Client Dhcp Required: False
Allowed (URL)IP Addresses
(Cisco Controller) >
(Cisco Controller) >show wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... Demo1x
Network Name (SSID).............................. Demo1x
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Enabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Enabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 1
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... mario-test-flex-vwlc
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
--More-- or (q)uit
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
--More-- or (q)uit
Radius Servers
Authentication................................ 10.0.16.111 1812
Accounting.................................... 10.131.16.111 1813
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Disabled
--More-- or (q)uit
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
--More-- or (q)uit
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Disabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
--More-- or (q)uit
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
Priority Policy Name
(Cisco Controller) >
when debugging the client during redirect, this is the output and I cannot spot anything wrong here...
(Cisco Controller) >*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Adding mobile on LWAPP AP 18:33:9d:f0:21:80(1)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Association received from mobile on BSSID 18:33:9d:f0:21:8e
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Global 200 Clients are allowed to AP radio
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Max Client Trap Threshold: 0 cur: 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be override for default ap group, marking intgrp NULL
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Re-applying interface policy for client
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfApplyWlanPolicy: Retaining the ACL recieved in AAA attributes 255 on mobile
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be In processSsidIE:4850 setting Central switched to FALSE
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Applying site-specific Local Bridging override for station 00:24:d6:97:b3:be - vapId 2, site 'default-group', interface 'management'
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Applying Local Bridging Interface Policy for station 00:24:d6:97:b3:be - vlan 220, interface id 0, interface 'management'
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Processing RSN IE type 48, length 22 for mobile 00:24:d6:97:b3:be
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Received RSN IE with 0 PMKIDs from mobile 00:24:d6:97:b3:be
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Setting active key cache index 8 ---> 8
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be unsetting PmkIdValidatedByAp
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Updating AID for REAP AP Client 18:33:9d:f0:21:80 - AID ===> 1
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Central switch is FALSE
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 8021X_REQD (3) DHCP required on AP 18:33:9d:f0:21:80 vapId 2 apVapId 2for this client
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Not Using WMM Compliance code qosCap 00
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 18:33:9d:f0:21:80 vapId 2 apVapId 2 flex-acl-name:
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfMsAssoStateInc
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 00:24:d6:97:b3:be on AP 18:33:9d:f0:21:80 from Idle to Associated
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfPemAddUser2:session timeout forstation 00:24:d6:97:b3:be - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be Sending Assoc Response to station on BSSID 18:33:9d:f0:21:8e (status 0) ApVapId 2 Slot 1
*apfMsConnTask_7: Aug 12 10:58:24.013: 00:24:d6:97:b3:be apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile 00:24:d6:97:b3:be on AP 18:33:9d:f0:21:80 from Associated to Associated
*spamApTask6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be Sent 1x initiate message to multi thread task for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be EAP-PARAM Debug - eap-params for Wlan-Id :2 is disabled - applying Global eap timers and retries
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be Station 00:24:d6:97:b3:be setting dot1x reauth timeout = 1800
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be dot1x - moving mobile 00:24:d6:97:b3:be into Connecting state
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be Sending EAP-Request/Identity to mobile 00:24:d6:97:b3:be (EAP Id 1)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.016: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be Received Identity Response (count=1) from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be Resetting reauth count 1 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be EAP State update from Connecting to Authenticating for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be dot1x - moving mobile 00:24:d6:97:b3:be into Authenticating state
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.083: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=214) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be WARNING: updated EAP-Identifier 1 ===> 214 for STA 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 214)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be Allocating EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.086: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.090: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.090: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 214, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.090: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.090: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=215) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 215)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.091: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.095: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.095: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 215, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.095: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.095: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=216) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 216)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.096: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.100: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.100: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 216, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.100: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.100: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=217) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 217)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.101: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.105: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.105: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 217, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.105: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.105: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=218) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 218)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.106: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.110: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.110: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 218, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.110: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.110: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=219) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 219)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.111: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.115: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.115: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 219, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.115: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.115: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=220) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 220)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.116: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.352: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.352: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 220, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.352: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.352: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=221) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 221)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.354: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.359: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.359: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 221, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.359: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.359: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=222) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 222)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.360: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.365: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.365: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 222, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.365: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.365: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=223) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 223)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.366: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.371: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.371: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 223, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.371: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.371: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=224) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 224)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.372: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.375: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.375: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 224, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.375: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.375: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be Processing Access-Challenge for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be Entering Backend Auth Req state (id=225) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be Sending EAP Request from AAA to mobile 00:24:d6:97:b3:be (EAP Id 225)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.389: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.391: 00:24:d6:97:b3:be Received EAPOL EAPPKT from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.391: 00:24:d6:97:b3:be Received EAP Response from mobile 00:24:d6:97:b3:be (EAP Id 225, EAP Type 13)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.391: 00:24:d6:97:b3:be Resetting reauth count 0 to 0 for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.391: 00:24:d6:97:b3:be Entering Backend Auth Response state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Processing Access-Accept for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Resetting web IPv4 acl from 255 to 255
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Resetting web IPv4 Flex acl from 65535 to 65535
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Username entry ([email protected]) created for mobile, length = 253
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Username entry ([email protected]) created in mscb for mobile, length = 253
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be override for default ap group, marking intgrp NULL
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 220
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Re-applying interface policy for client
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be apfApplyWlanPolicy: Retaining the ACL recieved in AAA attributes 1 on mobile
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Inserting AAA Override struct for mobile
MAC: 00:24:d6:97:b3:be, source 4
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Setting re-auth timeout to 1800 seconds, got from WLAN config.
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Station 00:24:d6:97:b3:be setting dot1x reauth timeout = 1800
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Creating a PKC PMKID Cache entry for station 00:24:d6:97:b3:be (RSN 2)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Resetting MSCB PMK Cache Entry 0 for station 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Setting active key cache index 8 ---> 8
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Adding BSSID 18:33:9d:f0:21:8e to PMKID cache at index 0 for station 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: New PMKID: (16)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: [0000] 6f d1 ce 84 08 74 41 a5 06 6b 89 02 c9 e9 f8 c8
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Disabling re-auth since PMK lifetime can take care of same.
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be unsetting PmkIdValidatedByAp
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Client in Posture Reqd state. PMK cache not updated.
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Sending EAP-Success to mobile 00:24:d6:97:b3:be (EAP Id 225)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Freeing AAACB from Dot1xCB as AAA auth is done for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be EAPOL Header:
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Found an cache entry for BSSID 18:33:9d:f0:21:8e in PMKID cache at index 0 of station 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Found an cache entry for BSSID 18:33:9d:f0:21:8e in PMKID cache at index 0 of station 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: [0000] 6f d1 ce 84 08 74 41 a5 06 6b 89 02 c9 e9 f8 c8
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Starting key exchange to mobile 00:24:d6:97:b3:be, data packets will be dropped
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Sending EAPOL-Key Message to mobile 00:24:d6:97:b3:be
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Sending EAPOL-Key Message to mobile 00:24:d6:97:b3:be
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Entering Backend Auth Success state (id=225) for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be Received Auth Success while in Authenticating state for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.410: 00:24:d6:97:b3:be dot1x - moving mobile 00:24:d6:97:b3:be into Authenticated state
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Received EAPOL-Key from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Received EAPOL-key in PTK_START state (message 2) from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be PMK: Sending cache add
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Stopping retransmission timer for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be EAPOL Header:
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00000000: 02 03 5f 00 .._.
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Sending EAPOL-Key Message to mobile 00:24:d6:97:b3:be
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Sending EAPOL-Key Message to mobile 00:24:d6:97:b3:be
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be Reusing allocated memory for EAP Pkt for retransmission to mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:dc mscb->apfMsLradSlotId = 1 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be mscb->apfMsBssid = 18:33:9d:f0:21:80 mscb->apfMsAddress = 00:24:d6:97:b3:be mscb->apfMsApVapId = 2
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 220 mscb->apfMsLwappMwarInet.ipv4.addr = 176217288
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.414: 00:24:d6:97:b3:be mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 176325157 mscb->apfMsLwappLradPort = 9385
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Received EAPOL-Key from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Stopping retransmission timer for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Freeing EAP Retransmit Bufer for mobile 00:24:d6:97:b3:be
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be apfMs1xStateInc
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Central switch is FALSE
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Sending the Central Auth Info
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Central Auth Info Allocated PMKLen = 32
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be PMK: pmkActiveIndex = 0
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be EapolReplayCounter: 00 00 00 00 00 00 00 01
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 apfMsEapType = 13
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 L2AUTHCOMPLETE (4) DHCP required on AP 18:33:9d:f0:21:80 vapId 2 apVapId 2for this client
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 18:33:9d:f0:21:80 vapId 2 apVapId 2 flex-acl-name:POSTURE_REDIRECT_ACL
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 6166, Adding TMP rule
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 18:33:9d:f0:21:80, slot 1, interface = 1, QOS = 0
IPv4 ACL ID = 255, IPv
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 220, Local Bridging intf id = 0
*Dot1x_NW_MsgTask_6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*apfReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*apfReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 5761, Adding TMP rule
*apfReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Replacing Fast Path rule
type = Airespace AP - Learn IP address
on AP 18:33:9d:f0:21:80, slot 1, interface = 1, QOS = 0
IPv4 ACL ID = 255,
*apfReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 220, Local Bridging intf id = 0
*apfReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*pemReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*pemReceiveTask: Aug 12 10:58:24.418: 00:24:d6:97:b3:be 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*spamApTask6: Aug 12 10:58:24.418: 00:24:d6:97:b3:be spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 pmkLen = 32
*DHCP Socket Task: Aug 12 10:58:24.546: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 325,vlan 220, port 1, encap 0xec03)
*DHCP Socket Task: Aug 12 10:58:24.546: 00:24:d6:97:b3:be DHCP setting server from ACK (server 10.0.17.85, yiaddr 10.130.130.120)
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 DHCP_REQD (7) Change state to WEBAUTH_REQD (8) last state DHCP_REQD (7)
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 WEBAUTH_REQD (8) pemAdvanceState2 6671, Adding TMP rule
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 WEBAUTH_REQD (8) Replacing Fast Path rule
type = Airespace AP Client - ACL passthru
on AP 18:33:9d:f0:21:80, slot 1, interface = 1, QOS = 0
IPv4 A
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 WEBAUTH_REQD (8) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 64206 Local Bridging Vlan = 220, Local Bridging intf id = 0
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 WEBAUTH_REQD (8) Successfully plumbed mobile rule (IPv4 ACL ID 1, IPv6 ACL ID 255, L2 ACL ID 255)
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be Plumbing web-auth redirect rule due to user logout
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be Assigning Address 10.130.130.120 to mobile
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be DHCP success event for client. Clearing dhcp failure count for interface management.
*DHCP Socket Task: Aug 12 10:58:24.548: 00:24:d6:97:b3:be DHCP success event for client. Clearing dhcp failure count for interface management.
*pemReceiveTask: Aug 12 10:58:24.548: 00:24:d6:97:b3:be 10.130.130.120 Added NPU entry of type 2, dtlFlags 0x0
*IPv6_Msg_Task: Aug 12 10:58:25.330: 00:24:d6:97:b3:be Pushing IPv6 Vlan Intf ID 0: fe80:0000:0000:0000:f524:1910:69f0:9482 , and MAC: 00:24:D6:97:B3:BE , Binding to Data Plane. SUCCESS !! dhcpv6bitmap 0
*IPv6_Msg_Task: Aug 12 10:58:25.330: 00:24:d6:97:b3:be Link Local address fe80::f524:1910:69f0:9482 updated to mscb. Not Advancing pem state.Current state: mscb in apfMsMmInitial mobility state and client state APF_MS_STATE_A
*DHCP Socket Task: Aug 12 10:58:28.581: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 308,vlan 220, port 1, encap 0xec03)
*DHCP Socket Task: Aug 12 10:58:28.589: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 308,vlan 220, port 1, encap 0xec03)
*DHCP Socket Task: Aug 12 11:00:07.959: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 308,vlan 220, port 1, encap 0xec03)
*DHCP Socket Task: Aug 12 11:00:07.967: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 308,vlan 220, port 1, encap 0xec03)
*DHCP Socket Task: Aug 12 11:01:59.153: 00:24:d6:97:b3:be DHCP received op BOOTREPLY (2) (len 308,vlan 220, port 1, encap 0xec03)
Can you see any obvious reason why the NAC agent wont pop up?
Thanks
Mario -
Cisco WLC Local Net user Authentication
Hi,
I have a Controller configured with local net users. Web policy with authentication has been configured for Layer 3 security. When the user tries to access the Wireless, they will be redirected to a web authentication screen, where they need to enter the pre-configured credentials to gain access.
Now, the requirement is: users shall have to provide login credentials only upon initial access (one time) and shall not have to accept an Acceptable Use Agreement when their systems connect to the wireless network. The next time user tries, they should be provided access automatically.
We have configured the following setting on Windows 7 client:
1. Connect automatically when the network is in range is selected
2. Please refer the attached screenshots for further configuration for Windows 7 Clients.
On WLC: SSID --> Advanced Options --> We have disabled the “Enable Session Timeout” setting, but we still have "Client Exclusion" Enabled.
When a computer is shutdown and brought back up within a few minutes the wireless credentials seem to stick, however, when the computer is shutdown for a period of overnight, the credentials are no longer cached and we have to re-authenticate to the wireless.
Is this issue because of "Client Exclusion" Enabled on the SSID/WLAN ?
If not, can someone share the complete procedure to make sure that users local net user credentials will be cache.
Thanks,
JaganWell you only can keep it connected for an x number of minutes. You will not be able to set it longer than a day. This means, I can't configure the WLC/Client to cache the credentials permanently? And everyday, they have to enter the credentials to access SSID?You can extend it up to 30 days, but you have to run v7.5. After that, they will have to login again.Change the idle timer to about 2-4 hours and that should keep the client on the WLC DB. This will allow the client to go away for the number set and come back without having to login again. As you said, if I configure the WLC Idle Time for 2-4 hours, do the client have to provide credentials the next day when they access Wireless?Yes. See my previous answerIs there any other way via which this can be achieved? (The limitation is : client should be authenticated only with the WLC.)If you are looking for clients to login once and then never again, the answer is no. You have two choices, you can use the new v7.5 and use the sleeping client feature which gives you max of 720 hours (30 days), or you use th eidle timer and after the idle timer expires, the user will have to login.Thanks,Jagan
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered" -
WLC Upgrades to 7.5.102.0 from 7.4.100.0 Question
We went through an upgrade from 7.4.100.0 for all of our WLC's this morning. One of the interesting features, that we wanted to take advantage of, was the BYOD profiling that the release notes talk about. I'm going through the controllers and see that there is now a tab under the SSID called "policy mapping". However, when I look for where I can create the local policy, I cannot find anything on the WLC for completing that task. I've been looking for instructions and notes on how to do this, but cannot seem to find any. Would anyone be able to point me in the right direction? Thanks!
Please
follow the below steps to create Local Policies.
Step 1
Choose Security > Local Policies.
Step 2
Click New to create a new policy.
Step 3
Enter the policy name and click Apply.
Step 4
On the Policy List page, click the policy name to be configured.
Step 5
On the Policy > Edit page, follow these steps:
In the Match Criteria area, enter a value for Match Role String. This is the user type or user group of the user, for example, student, teacher, and so on.
From the Match EAP Type drop-down list, choose the EAP authentication method used by the client.
From the Device Type drop-down list, choose the device type.
Click Add to add the device type to the policy device list.
The device type you choose is listed in the Device List.
In the Action area, specify the policies that are to be enforced. From the IPv4 ACL drop-down list, choose an IPv4 ACL for the policy.
Enter the VLAN ID that should be associated with the policy.
From the QoS Policy drop-down list, choose a QoS policy to be applied.
Enter a value for Session Timeout. This is the maximum amount of time, in seconds, after which a client is forced to reauthenticate.
Enter a value for Sleeping Client Timeout, which is the timeout for sleeping clients.
Sleeping clients are clients with guest access that have had successful web authentication that are allowed to sleep and wake up without having to go through another authentication process through the login page.
This sleeping client timeout configuration overrides the WLAN-specific sleeping client timeout configuration.
In the Active Hours area, from the Day drop-down list, choose the days on which the policy has to be active.
Enter the Start Time and End Time of the policy.
Click Add.
The day and start time and end time that you specify is listed.
Click Apply. -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
CSCuh08009 - WPA2-PSK mac-filter assign interface wrong after client roaming back
Hi All,
Does anyone here experienced the same problem in WLC 5500 controllers?
FW: 7.4.110
WPA2-PSK with MAC-Filter, ACS has the database of allowed host MAC addresses
Regards,
Mikhail VeranThanks Scott, The code version is 7.6.130.0 which supports Sleeping Client feature. However, as per the docu "http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/b_cg76_chapter_010111.html#reference_7008E6F7D7094BA7AD39491D7361622D"
The authentication of sleeping clients feature is not supported with Layer 2 security and web authentication enabled.
and as you mentioned as well
...Sleeping client like George mentioned is a better way than adjusting the idle timer but strictly for layer 3 only...
Sleeping Client wasn't an option in my case. That is why I was hoping that Idle Timeout may do the trick here. This is an actual case where a client with an existing wireless network just wanted to enable sleeping client feature so that their guests don't need to re-auth if their device sleeps or they go out (break) and come back after some time. Layer-3 Web Auth alone should be enough I think. Keeping L2-PSK is probably their security team's decision, as they also use the same SSID for BYOD devices and don't want nearby people/buildings to see that there is an Open Wifi available and on joining would see the Web Auth portal and company disclaimer.
George, I agree with Dot1X method. It can be used for the BYOD devices (separate SSID) while we can keep the Guest WLAN as L3-WebAuth only on controller (or do CWA through ISE if available).
Thanks for all your help.
Rick. -
Cisco Flex 7500 controller with client disconnects
Hey All,
There will be alot of info in this post, hopefully all helpful, more info the better right! If you require anymore info to help me out to not hesistate to request it.
We have been having some issues with clients connecting and disconnecting several times a day and having to manually reconnect from the icon on their taskbar. We have about 380 APs, and 200+ more to deploy that we have and are licensed for but are having some issues that we want to resolve first obviously.
Some locations our setup is a bit more complex than this with multiple SSIDs and vlans, but this issue is everywhere so i will keep it to our simple setup for now:
AP Models: AIR-LAP1042N-A-K9, AIR-CAP1602I-A-K9 (Most locations do not have a mix of both, most have 1042s)
Running a single SSID - WPA/WPA2 with: WPA - TKIP and WPA2 - AES on the same SSID.
They talk back to a Cisco Flex 7500 Series through a tunnel (should not be any port blocking preventing communication)
We are running from what i understand a bad firmware version (7.6.100.0) and during our next maintenance window i am going to try and get them to change to a more stable firmware version.
Data Rates of 1,2,5.5,11 Mbps are disabled
TPCv1 coverage running
Automatic Power Assignment
I will not focus on the a/n/ac network as most of our devices are connecting to WPA due to the config they already have.
Ideally i would like to get rid of WPA all together but i am not 100% in control of the decisions to get the started and people here like to delay things lol.
It is hard to say if the issue is specific to a model as we have so few 1602Is, and it is just at our main office. I have not heard many complaints but i have noticed i will now and then get a limited or no connectivity settings on my wireless icon on my PC. I use hard-wired so i don't really notice if it is not working.
In most locations it looks like the controller is doing a decent job at selection channels to use. I did find one spot where it had on 11 APs down a long hallway, and did not use channel 6 once. I statically set that location to stagger the channels to see what kind results we had and am still waiting to hear on that as they complained the most out of all of our locations. In some cases 3 APs in a row were on channel 1 in the hallway, in alot of casses 1 was 2 times in a row as well as 11 so there was alot of overlap.
I am attaching my show sysinfo and show wlan 17 for that informtion, some of the other settings i have changed today that were previously enabled/set different are:
Disabled Cisco Aironet IE
Set channel automatic rescan from 10 mintues to 12 hours as i can image if it is changing the channels alot it can lead to disconnects.
Some of the main things we get in our message log are:
*dot1xMsgTask: Oct 16 15:17:36.943: #DOT1X-4-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:508 Max EAPOL-key M5 retransmissions exceeded for client 84:85:06:0b:a6:33
- Not sure why we get this as we have a PSK and do not have local eap enabled.....
*apfMsConnTask_6: Oct 16 15:19:01.753: #APF-3-AID_UPDATE_FAILED: apf_80211.c:6570 Error updating Association ID for REAP AP Clientc8:f9:f9:2b:fd:50 - AID 4
*apfMsConnTask_6: Oct 16 15:19:01.753: #LWAPP-3-INVALID_AID2: spam_api.c:1462 Association identifier 4 for client 18:9e:fc:4d:9e:87 is already in use by 8c:2d:aa:b7:70:5e
- There is a bug for this log, but according to the bug our 7.6.100.0 is not effected
Here is my show sysinfo:
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.100.0
RTOS Version..................................... 7.6.100.0
Bootloader Version............................... 7.6.101.2
Emergency Image Version.......................... 7.6.101.2
Build Type....................................... DATA + WPS
System Name...................................... Cisco_cf:17:26
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1295
Redundancy Mode.................................. Disabled
IP Address....................................... 10.156.50.100
System Up Time................................... 52 days 5 hrs 54 mins 25 secs
System Timezone Location......................... (GMT -4:00) Altantic Time (Canada)
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... CA - Canada
--More-- or (q)uit
Operating Environment............................ Commercial (10 to 35 C)
Internal Temp Alarm Limits....................... 10 to 38 C
Internal Temperature............................. +22 C
Fan Status....................................... OK
RAID Volume Status............................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 13
Number of Active Clients......................... 1584
Burned-in MAC Address............................ 70:81:05:CF:17:20
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 600
Here is my Show wlan 17
WLAN Identifier.................................. 17
Profile Name..................................... AirCCRSB
Network Name (SSID).............................. AirCCRSB
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 1768
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 28800 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... Cisco_cf:17:26
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled
Local Policy
Priority Policy NameAs long as you take the configuration backup downgrading from 7.6.100.0 to 7.4.121.0 should be fine. Because this is Flexconnect deployment, make sure you review the release notes thoroughly as config like vlan mapping is impacted it is painful to reconfigure.
I still think moving to 7.6MR3 & once 8.x get stable going for that code is a good plan. Though 7.4.121.0 is assure wave it does not mean it has no bugs.(remember that prior to this 7.4.110.0 was assure wave & it deferred in quick time) . I would say 8.x going to be the code staying for long time period, so ultimately you have to be there.
In 8.x there are few FlexConnect improvements,one being AP won't reload when you change from local mode to FlexConnect.
HTH
Rasika
**** Pls rate all useful responses ***
Maybe you are looking for
-
Z10 Tips, Tricks and Shortcuts
I've compiled these tips from several week's worth of using the Z10 BlackBerry. For the new Z10 user, you'll find some good stuff here and I urge you to just sit down for 20 miutes and go through each of these. They'll stick with you that way. For th
-
I am trying real hard to like Premier Elements, but having problems out of the shute. I took a 11 meg .avi and put into PE and then chose share and computer. There I saved it as an .avi, mpeg, and wmv. That saved as 221 mb, 51 mb, and 3.6 mb. I us
-
Improving persistent class performance with on-demand DB reads?
Hi, Something that has been troubling me for some time is the data access design of persistent classes. A persistent class loads the ENTIRE data set when it is instantiated. To me this defeats one of the advantages of get/set methods. What I would li
-
Hello, I need to add a custom field to the PR transaction. I have added the field to screen 111 of Function group XM02, added the custom field in the able EBAN under the include structure "CI_EBANDB", coded function exit EXIT_SAPLMEREQ_003. For the
-
New To DW5 , downloaded a page, looks a total mess
Ok, I just downloaded purchased DW5 and downloaded this page via our FTP www.fasttracktofatloss.com [Moderator's note: This website autoplays video and tries to prevent users from leaving by loading a second page which also autoplays a video. Visit a