"Slide to call" will not let me end call

The slide to call feature, aside from being a AMJOR security flaw, seems to have another bug, unless someone can help me. If I choose to "slide to call" a missed call, I can have a perfectly fine call, but when I am finished I cannot end the call. All I get is the passcode lock screen, with a passcode already answered (not one I entered - it just looks populated). The only way to end the call seems to be to unlock the phone and end the call from there.
So anyone can call back a missed call (even if my phone is locked) but I have to lunlock it to end the call. Tell me this is wrong - seriously wrong. Or fix it.
I accidentally called someone back (foolishly thinking my phoen was locked), and then could not hang up - so they could still hear me, even though I assumed the call was ended (the "0" number looks slightly red so I assumed it was to be pressed to end the call - but there appears to be nothing on the website to tell you how this feature works - should I be able to hang up a call?, should I even be able to call someone back without unlocking the phone (which sounds so unbelievably luicrous for a locked phone)

Hey kmeand!
It sounds like it would be best for you to have the settings for phone notifications showing in the lock screen turned off. You can control these settings on your phone by navigating to the Notifications center in the Settings app, then find the Phone notifications settings, then flip the toggle switch for "Show in Lock Screen" to off. More information on this can be found here:
Notification Center - iPhone User Guide
http://help.apple.com/iphone/7/#/iph6534c01bc
As for addressing your issue with ending a call from the slide to return call feature, you may need to try to force close the phone app then test again, or reset the phone, then test again. I have two articles for you to help you with these troubleshooting steps, and they can be found here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Similar Messages

My brand new 4S will not let me end a call my screen goes black nor will it let me text while i'm on a call?

My brand new iphone 4S will not let me end a call the screen goes black nor will it let me text while on a call

Remove the plastic screen protector, case, or whatever is interferring with the proximity sensor.
If that is not the issue, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

It will not let me edit the quiz result slides length.

I need to edit the length of time that the quiz results page is on the screen. It will not let me edit it. Also the continue button does not work.

The Quiz Results slide will always pause and there's no way to prevent that. Look at its timeline and you can see a faint vertical line that indicates the pause point. You can use your mouse to move this sideways and delay the pause untill objects enter the timeline. But the rest of the slide beyond that pause point will only play once you click the Continue button. If you have set a very long duration for the Quiz Results slide, then once you click Continue, what you see as the Continue button not working could just be the timeline continuing to play until it reaches the end of the slide. Watch the scrub bar on the playback bar to see if it's moving.
Once the slide is paused the user has to click one of the buttons on that slide to move elsewhere. If your Continue button is not working, the usual reason is that you have the Quiz > Settings > Required option set to something that will prevent the learner from moving beyond the Quiz Results slide until they fulfil some kind of requirement (e.g. answer all questions or pass the quiz). So check that setting.

When on the internet, my phone will not let me call the number i choose.

When on the internet, my phone will not let me call the number i choose.

If you have a 1G iPod then you are in the same boat of other 1G users, It appears that Apple changed the App store and the update prevent 1G users from purchasing items. I have not seen a solution yet.

Pop up states i'm being directed to a phishing site and to call "this" number, after I click on OK it just keeps popping up again and will not let me out of an endless loop

I am in an endless loop on my other iMac computer. I happened upon a page where it said "phishing site ahead" and then a pop up comes on screen telling me to call a certain number and then I click okay and of course do not call and it will not let me out of this endless loop. Shut down computer, quit Safari, but when I reopen Safari it still takes me to that same page and will not let me out or use any menu items or toolbar items. Just the same little popup box telling me to call a certain number with an OK button and I can't go anywhere or do anything on Safari. What can I do?

Also I copied this from my other computer web page:
Reported Phishing website ahead. Your network ha been monitored. Your network has been compromised due to Browser hijacking.The browser hijacking software may redirect you towards phishing websites that try to access your Login Password details. To fix this browser redirection issue we recommend you ask for instant help. Help Line 1 877 899 1824.
Then another smaller popup window pops up
http://www.pcassists.info
Security Error
Call Helpline 1877 899 1824
So this is what I was talking about, and the small popup window plus the larger Window stating "Reported Phishing website ahead" will not go away and I cannot use Safari anymore even after I shut down my computer, disconnected it, and then signed on again and reopened Safari, it still takes me to that page and I cannot get out of it.
PLEASE HELP!!!!!!!!

HT201412 My lock screen is frozen. It will not let me slide to unlock or anything. I can't power it off because my lock button is broken and I can't do the assistive touch thing? Help!

My lock screen is frozen! It will not let me slide to unlock or touch the screen at all. I can't power it down either because the lock button is broken. A friend of mine said I might need a new Digitizer? Is there anyway I can avoid that? Pleasae Help!

I am having the SAME exact problem! Except instead of lock button broken it's my home button so I can't do the whole "put in recovery mode" deal. My screen only says "tap the home button 3 times" and it has my screen locked until I hit the home button but since it is broken I can't get in my phone at all. I have all of my work info in my phone so I'm screwed and can't get any help. PLEASE let me know if you find a way around this...!!!
Thanks!

HT4623 After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off.

After updating my phone yesterday it worked for about 30 minutes. Now however, it will not let me "Slide To Unlock" the screen is totally unusable and i have alarms that go off every 8 minutes because i am not able to get into my phone to them off. has anyone else had this problem with it being "stuck"?

Basics from the user guide have always been, and still remain, restart, reset, restore from backup, restore as new.

I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close. How do I restart the ipad?

I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close. How do I restart the ipad?

Hi there, welcome to the site,
I have posted a link below which has instructions on how to do this. They are quite simple, so take a look.
iPad not responding
Regards,
Nathan

My ipad will not let me slide to log in, or power off. i have tried to hold down the sleep and home button at the same time, but that did not work. Do you have any tips for me? Thanks

my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.

recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

My apple pad 1 has voice that says to slide to unlock but will not let me out in my pass code

my apple i pad I has voice message that says to slide to unlock but it will not let me put in my pass code. I tried to go into i tunes but i need the passcode to due that.

If it's saying what is on screen then you probably have VoiceOver (one of the accessibility features) 'on'. Try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Accessibility Shortcut (or Triple-Click Home depending upon the iOS version on your iPad).
If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you should be able to do it by connecting to your computer's iTunes (after typing in your passcode via the tap/double-tap process) : http://support.apple.com/kb/HT5018

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

IOS 8.1 will not let me make calls via car Bluetooth system , i can only receive calls , making calls i have to select handsfree manually each time , no problem before , 2013 mitsubishi outlander

iOS 8.1 will not let me make calls via car Bluetooth system , i can only receive calls , making calls i have to select handsfree manually each time , i had no problem before iOS 8 , 2013 mitsubishi outlander , I'm based in South Africa and support of any type really ***** here , would really appreciate any help , i have unpaired , deleted , repaired and so forth , nothing works

Hi
i have a honda crv, 9 month old. I have before an iphone 5 s, it was perfect./ios7.1.2/
after soft update 8.0 disconected from hands free system, every 5-6 second, over 2-3 second back into connection automatically.
After i changed into iphone 6 / only 8.X/
It was an update. i think 8.0.2 for this problem, that this update was bad.
This problem is by lexus, VW, and another 2 Honda CRV, 1 civic / 2024 /
ONLY 8.0 or higher soft
this time 8.1.2
Today was 1 minutes call, by calling was 4-5 disconnect episodes
i probe with another iphone 5s/7.1.2/, motorola x 2014, galaxy s5 - there are perfectly
IT'S a SOFTWARE PROBLEM!!!!

Please help! My iPhone 4s will not let me slide wifi from off to no"

Please help! My iPhone 4s will not let me slide wifi from off to no"

http://support.apple.com/kb/ts1559

Please help! My iPhone 4s will not let me slide from off to no

Please help! My iPhone 4s will not let me slide from off to no

try this:
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

My ipad will not let my friend call from their iphone

I just got an ipad 2 today and added someone onto my contacts but for some reason it will not let us connect and I don't know why.

ya I knwo that but if I am wifi connected and they call my email the face time should work and for some reason it is not.

"Slide to call" will not let me end call

Similar Messages

Maybe you are looking for