Slider + activating column switches for a column chart

Hi,
I am trying to make an Xcelsius presentation and because I am a bit stuck I thought that may be you could point me to some solution.
It is a three element column chart
+ three status switches for every column chart column (if the switch is On, then the slider should affect (i.e. increase/decrease) the corresponding column, otherwise not)
+ a vertical slider which should increase/decrease only those of the columns for which the corresponding column switches are set On. If no column switch is On, then the slider should not affect any column value.
As I see it, an intermediate subtraction value for every column should be calculated, depending on the corresponding column switch and cur slider value. And this value should be subtracted from the current slider value in order to receive the right current value for every column. I have tried with some formulas but with no success.
Or may be a totally different approach should be taken?
(By the way, is there some way that Excel store/memorize in the excel table the various intermediate values for the corresponding columns, so that they dont always depend on a formula, but after they are calculated they are stored for later processing?)
As I have tried many variants with no success, I am beginning to doubt if this could at all be achieved with Excelsius.
Do you think this kind of functionality could somehow be organized with Excelsius?
Just in case I have put [here|
inspire.wdf.sap.corp\INSPIRE_Share\Raptor_share\tmp\example_frames.zip] (
inspire.wdf.sap.corp\INSPIRE_Share\Raptor_share\tmp\example_frames.zip) example frames, which demonstrate what the functionality should do.
Thanks!
Edited by: Kiril Bratanov on Oct 22, 2009 10:01 AM

Lisa,
Numbers will "wrap" text in a cell if you selec the cell(s) where you want to to wrap and check the box:
If there is more, then please post a screen shot of what you doc currently looks like and what you want to change.
Best Regards,
Wayne

Similar Messages

Finding source database table/column name for a column in a view

Hi i need to be able to identify the original database table/column name for a column in a view.
e.g. say i have a view like this
create v1 as select a.name fname, b.name bname, c.name cname,......
from u1.names a, u2.names b. u3.names c
where .....
Now I want to find out that the database table/column name for the fname, bname and cname columns in the view v1, which in this instance is u1.name.name, u2.names.name, u3.names.name.
But i need to be able to do it for any view. Short of parsing the SQL is there an easy way of doing this?
Now obviusly I can't do this for virtual columns but I will know my column is not virtual as it has an index on it.

But i need to be able to do it for any view. Short of
parsing the SQL is there an easy way of doing this?No, parsing the SQL is the only way. Good luck it is not something I would want to attempt.

JTable - One Column Heading for Two Columns

Can you adjust the default JTable to have one column heading for two columns of data? Is there a simple span command? I've looked at the api for JTable and JTableHeader and didn't see anything, is there something I'm missing? Any help would be appreciated.

What i am trying to accomplish is have column 'E' span 2 columns.
This is my code thus far, however it give the error from my pryor message. I am pretty sure it is because I'm using and Object[][] and a String[] instead of Vectors. What corrections do I need to make in order for my goal of:
[ A ][ B ][ C ][ D ][ E ][ F ][ G ]
[ 1 ][ 2 ][ 3 ][ 4 ][5][6][ 7 ][ 8 ]
Object[][] data = new Object[ROWS][COLUMNS];
String[] columnNames = {"A","B","C","D","E","E","F","G"};
table = new JTable(data, columnNames);
table.setBackground(Color.white);
table.addKeyListener(this);
DefaultTableCellRenderer d = new DefaultTableCellRenderer();
d.setHorizontalAlignment(JLabel.CENTER);
table.setDefaultRenderer(table.getColumnClass(0),d);
for (int i = 0; i < table.getColumnCount(); i++){
TableColumn aColumn = header.getColumnModel().getColumn(i);
TableCellRenderer renderer = aColumn.getHeaderRenderer();
if (renderer == null) {
renderer = new DefaultTableCellRenderer(){
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column){
JTableHeader header = table.getTableHeader();
if (header != null) {
setForeground(header.getForeground());
setBackground(header.getBackground());
setFont(header.getFont());
setHorizontalAlignment(JLabel.CENTER);
setText((value == null) ? "" : value.toString());
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
return this;
aColumn.setHeaderRenderer(renderer);

Web Dynpro ALV disable column sort for specific column

Hi,
I have the above mentioned problem. The Coding I use is:
DATA: lr_field_settings TYPE REF TO if_salv_wd_field_settings,
lt_fields TYPE SALV_WD_T_FIELD_REF.
FIELD-SYMBOLS: <fs_field> LIKE LINE OF lt_fields.
lr_field_settings ?= lr_config.
lt_fields = lr_field_settings->get_fields( ).
READ TABLE lt_fields ASSIGNING <fs_field> WITH KEY fieldname = 'ANSPRECH_DETAILS'.
IF sy-subrc EQ 0.
<fs_field>-r_field->if_salv_wd_sort~set_sort_allowed( abap_false ).
<fs_field>-r_field->if_salv_wd_sort~set_grouping_allowed( abap_false ).
ENDIF.
When debugging I can see that the object attributes for sort_allowed and grouping_allowed are changed from 'X' to ' '
but the running application still allows sorting and grouping for the column 'ANSPRECH_DETAILS'.
So what did I forget or what is my mistake ????
Thx for your help.
Dino Dini

I got the similar requirement and I tried to do the below way.. it worked for me..
DATA: lr_field_settings TYPE REF TO if_salv_wd_field_settings.
DATA: lr_field TYPE REF TO cl_salv_wd_field.
lr_field_settings ?= lr_table.
lr_field = lr_field_settings->get_field( 'MATNR' ).
lr_field->IF_SALV_WD_SORT~SET_SORT_ALLOWED( abap_false
you can observe in the below image that sort option is not enabled for MATNR in the ALV.

Different column height for each column

I have problem with jTable.
I have 4 columns in my jtable. height of two columns is same and
height of two is doble the height of first two columns.
I know that height can be set to entire row by setRowHeight()
Could any one suggest solution for this.
Thanks

Thanks for your reply.
But I don't want resize all the columns.
For example two columns height 16 pixels, then rest of should be 32 pixels

Column alias for spatial column within cursor loop using dynamic SQL

The following PL/SQL is trying to generate an error report for records or objects which are 3 dimensional or above. I have no issue execute one statement in SQLPLUS but I need to use the column alias for the spatial column. But, it is a different story using PL/SQL and dynamic SQL Any help will be great because I've been working on this for than 8 hours but with no luck! Thanks.
Here is the error I'm getting,
stmt := 'select p.column_name.get_gtype(), id from '|| table_name p ' where p.column_name.get_gtype() > 2 ';
ERROR at line 15:
ORA-06550: line 15, column 79:
PLS-00103: Encountered the symbol "P" when expecting one of the following:
. ( * @ % & = - + ; < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || member SUBMULTISET_
The symbol "* was inserted before "P" to continue.
and my PL/SQL is,
set serveroutput on size 100000 feedback off
declare
rs integer;
rs1 integer;
cur integer;
rp integer;
trs integer;
n integer;
un varchar2(30);
stmt varchar2(200);
begin
dbms_output.put_line(rpad('Table Name',40)||' Dimension');
dbms_output.put_line(rpad('-',53,'-'));
cur:= dbms_sql.open_cursor;
for t in (select column_name,table_name from user_sdo_geom_metadata where regexp_like(table_name, '[^[A-B]_[AB]$'))
loop
stmt := 'select p.column_name.get_gtype(), id from '|| table_name p ' where p.column_name.get_gtype() > 2 ';
dbms_sql.parse(cur, stmt, dbms_sql.native);
dbms_sql.define_column(cur, 1, rs);
dbms_sql.define_column(cur, 2, rs1);
rp:= dbms_sql.execute(cur);
n:=dbms_sql.fetch_rows(cur);
dbms_sql.column_value(cur, 1, rs);
dbms_sql.column_value(cur, 2, rs1);
dbms_output.put_line(rpad(t.table_name,38,'.')||rpad(rs,15)||rpad(rs1,15));
end loop;
dbms_sql.close_cursor(cur);
dbms_output.put_line(rpad('-',53,'-'));
end;
set serveroutput off feedback on feedback 6

The following PL/SQL is trying to generate an error report for records or objects which are 3 dimensional or above. I have no issue execute one statement in SQLPLUS but I need to use the column alias for the spatial column. But, it is a different story using PL/SQL and dynamic SQL Any help will be great because I've been working on this for than 8 hours but with no luck! Thanks.
Here is the error I'm getting,
stmt := 'select p.column_name.get_gtype(), id from '|| table_name p ' where p.column_name.get_gtype() > 2 ';
ERROR at line 15:
ORA-06550: line 15, column 79:
PLS-00103: Encountered the symbol "P" when expecting one of the following:
. ( * @ % & = - + ; < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || member SUBMULTISET_
The symbol "* was inserted before "P" to continue.
and my PL/SQL is,
set serveroutput on size 100000 feedback off
declare
rs integer;
rs1 integer;
cur integer;
rp integer;
trs integer;
n integer;
un varchar2(30);
stmt varchar2(200);
begin
dbms_output.put_line(rpad('Table Name',40)||' Dimension');
dbms_output.put_line(rpad('-',53,'-'));
cur:= dbms_sql.open_cursor;
for t in (select column_name,table_name from user_sdo_geom_metadata where regexp_like(table_name, '[^[A-B]_[AB]$'))
loop
stmt := 'select p.column_name.get_gtype(), id from '|| table_name p ' where p.column_name.get_gtype() > 2 ';
dbms_sql.parse(cur, stmt, dbms_sql.native);
dbms_sql.define_column(cur, 1, rs);
dbms_sql.define_column(cur, 2, rs1);
rp:= dbms_sql.execute(cur);
n:=dbms_sql.fetch_rows(cur);
dbms_sql.column_value(cur, 1, rs);
dbms_sql.column_value(cur, 2, rs1);
dbms_output.put_line(rpad(t.table_name,38,'.')||rpad(rs,15)||rpad(rs1,15));
end loop;
dbms_sql.close_cursor(cur);
dbms_output.put_line(rpad('-',53,'-'));
end;
set serveroutput off feedback on feedback 6

EBS Columns/Tables for DWH Columns/tables.

Hi Friends,
We are working on OBIA HR- Analytics. I want to trace out EBS Columns/Tables to some of our DWH columns. Pl find the below examples in my little investigation.
Headcount (DWH Column) : DWH Table: W_WRKFC_BAL_A
EMPLOYEE_NUMBER ( EBS column) : EBS Source Table: PER_ALL_PEOPLE_F
Mapping: SDE_ORA_EmployeeDimension
Mapplet: mplt_BC_ORA_EmployeeDimension
Now, i m trying to trace out the same stuff for the below DWH table/columns:
W_WRKFC_EVT_A --> W_WRKFC_EVT_F
TERMINATION_CNT --> TERM_EVENT_IND
Pl. let me what are the EBS tables/columns for W_WRKFC_EVT_F (table) / TERM_EVENT_IND (column)
But, i m thinking that, TERMINATION_CNT / TERM_EVENT_IND is not a direct column from EBS. SOme logic is going on this column using diff. columns. But, not sure.. :)
Pl guide me how to resolve this issue..
Thanks in Advance.
Raghu Nagadasari

Hi,
I got some EBS Queries from below links and i think, i m near to my requirement :) I will let u guys know once i get the complete query..
https://www.google.co.in/search?q=ebs+query+to+find+out+Employee+Termination+Count&newwindow=1&ei=yZOsUdf6EYW3rAfu1YGwBg&start=10&sa=N&biw=1024&bih=595
http://appsquery.blogspot.in/2010/08/query-to-get-active-employees-and.html
http://appsquery.blogspot.in/2010/08/query-find-employee-count.html
Raghu Nagadasari

Mulitple Line column headers for a column in ALV using Web Dynpro for ABAP

Hi WD4A Gurus,
       I have requirement to display the header name in multiple lines for a single column using ALV. How to achieve this, do I need to do some custom code? Please help me with sample code.
Example:
existing column name :
            Name   | Date (mm/dd/yyyy) | Amount
required column name:
            Name   |    Date               | Amount
(mm/dd/yyyy)
Thanks
Ketan

Displaying header in multiple lines is not possible in alv
Regards
Tamil

Get column value for specific columns

I want to change the default behavior of a IKM. In a specific step, I need to call a PLSQL procedure inside the loop below, and that procedure will substitute the insert clause. The procedure uses only some attributes, and I need to check the name of each one when I use the getColList method.
     for aRecord in myCursor loop
          insert into      <%=snpRef.getTable("L","TARG_NAME","A")%>
               <%=snpRef.getColList("", "[COL_NAME]", ",\n\t\t\t", "", "((INS AND (NOT TRG)) AND REW)")%>
               <%=snpRef.getColList(",", "[COL_NAME]", ",\n\t\t\t", "", "((INS AND TRG) AND REW)")%>
          values
               <%=snpRef.getColList("", "aRecord.[COL_NAME]", ", \n\t\t\t", "", "((INS AND (NOT TRG)) AND REW)")%>
               <%=snpRef.getColList(",", "aRecord.[COL_NAME]", ", \n\t\t\t", "", "((INS AND TRG) AND REW)")%>
     end loop;
For example, to call the procedure I do that: schema.proc_1(col1, col2, col3). However, I have more than 3 columns, and I need to restrict them when I use the getColList method. I would like to know if there is a way to get only specific columns, giving these names. I pass the name of the column, and the method should return its value. Can I use the getColList to do that? Is there any other way to do that?

Hi Luciene,
You can use the UD flags to do this. If you click on one of your mappings in the Diagram tab of your interface you will notice several UD flags (UD1 to UD5) you can use those to flag the columns you want to use in proc_1.
To summarize:
- at the interface level flag the columns you want to use in your PL/SQL code -> check UD1 for all of them
- modify your IKM code:
<%=odiRef.getColList(",", "COL_NAME", ",\n\t\t\t", "", "((INS AND TRG) AND REW AND UD1)")%> <- retrieve columns flagged with insert, not read only, mapped on target and with UD1 flagged. The "AND UD1" part can be used in other getColList.
Hope this helps.
Thanks,
Julien

Column with for dynamic Columns

Hi,
In my report i have dynamic columns and i am achieving this using <?split-column-header:header?> , <?split-column-data:variable?>
I need to define with for the dynamically created columns.
How do i achieve this.
i have seen <?split-column-width:name?>,<?split-column-width:@width?> but didn't succeed.
I tried <?split-column-header:header?><?split-column-width:@200pt?><?heading?><?end split-column-data?>
Please advice.
Regards
Jeethi George

If you have BIP desktop client installed, please do refer the example in C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\samples\RTF templates\Advanced\Dynamic Columns
Also check the same described here http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535400

Issue with Faux Column solution for 2 Column website

Hi - I hope you can help me
I have come across a problem which I haven't seen before using the Faux Column method in DW CS5 - there is a white line appearing down the right side of my sidebar which I can only imagine is caused by the repeated background image I have set in the body tag.
The code I have added to the body tag in my css style sheet is;
background: #FFF url(../images/faux_background.jpg) repeat-y 50% 0;
Website where the issue is occuring is www.nurtureearlylearning.co.nz. The issue so far is appearing in Chrome, Firefox and IE. IN Chrome and FIrefox, it will appear and disappear as you adjust the screen size but there is no consitency with what size the browser is.
Please keep in mind that website is not finished yet - just an issue that i'd like to resolve so far
Any help would be appreciated - thanks!
Clint

I'm using Firefox and I don't see a white line. Not entirely sure why you need a background image at all for this layout since the entire page is white.
See a live example of Faux Columns
http://alt-web.com/TEMPLATES/3-col-white-gray.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Getting the system generated column name for xmltype column

Hello,
how i can get the internal column name (p.a. SYS_NC00001$) for a xmltype column? I cannot find a correct dictionary view .
I need that for moving a xmltype lob partition to another tablespace.
Thanks,
MaikR

Does the following help:
http://www.idevelopment.info/data/Oracle/DBA_tips/LOBs/LOBS_2.shtml
http://www.liberidu.com/blog/?p=264

EA2 - BUG: Export produces invalid SQL for BINARY_DOUBLE columns

Description:
When a table contains a BINARY_DOUBLE column, INSERTs for that column in SQL exported with Export Wizard are invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table containing a BINARY_DOUBLE column, e.g.:
CREATE TABLE "TESTTABLE" ("BINDBLCOL" BINARY_DOUBLE) ;
- add some data (floating-point numbers) to the table
- choose Tools -> Export Wizard (or Export DDL and Data in SQL Developer v1.2)
- check exporting of tables and data, on "Specify Objects/Data" choose your table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: floating-point numbers are enclosed in apostrophes (see below, relevant part is underlined).
-- DDL for Table TESTTABLE
CREATE TABLE "TESTTABLE"
( "BINDBLCOL" BINARY_DOUBLE
-- DATA FOR TABLE TESTTABLE
-- FILTER = none used
-- INSERTING into TESTTABLE
Insert into TESTTABLE (BINDBLCOL) values ('1.2345');
-- END DATA FOR TABLE TESTTABLE
The script, when run, produces following error on INSERT line:
SQL Error: ORA-01722: invalid number
When apostrophes are removed manually, script runs without problems.
Remarks:
SQL Developer: 1.5.0.52 MAIN-52.03; the same bug also on 1.2.1, build MAIN-32.13
Oracle DB: 10 Express
OS: Windows 2000 Professional
Java: 1.5.0.52: 1.5.0_15; 1.2.1: 1.6.0_03

Description:
When a table contains a BINARY_DOUBLE column, INSERTs for that column in SQL exported with Export Wizard are invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table containing a BINARY_DOUBLE column, e.g.:
CREATE TABLE "TESTTABLE" ("BINDBLCOL" BINARY_DOUBLE) ;
- add some data (floating-point numbers) to the table
- choose Tools -> Export Wizard (or Export DDL and Data in SQL Developer v1.2)
- check exporting of tables and data, on "Specify Objects/Data" choose your table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: floating-point numbers are enclosed in apostrophes (see below, relevant part is underlined).
-- DDL for Table TESTTABLE
CREATE TABLE "TESTTABLE"
( "BINDBLCOL" BINARY_DOUBLE
-- DATA FOR TABLE TESTTABLE
-- FILTER = none used
-- INSERTING into TESTTABLE
Insert into TESTTABLE (BINDBLCOL) values ('1.2345');
-- END DATA FOR TABLE TESTTABLE
The script, when run, produces following error on INSERT line:
SQL Error: ORA-01722: invalid number
When apostrophes are removed manually, script runs without problems.
Remarks:
SQL Developer: 1.5.0.52 MAIN-52.03; the same bug also on 1.2.1, build MAIN-32.13
Oracle DB: 10 Express
OS: Windows 2000 Professional
Java: 1.5.0.52: 1.5.0_15; 1.2.1: 1.6.0_03

How set maximum of characters for the columns

Hello I use a JTable and I want to set maximum of characters for the columns.
For example column 1 max 10 characters, column 2 max 20 characters, etc..
How can I do this?

The principle is as follows: a table uses certain input components for editing a cell value, e.g. a JCheckBox for Boolean-type values or a JTextField for textual/numerical values. By default, a JTextField doesn't have any size limit, so you can enter as many chars as you want. In order to change this behaviour, you'll have to
1.) create a JTextField that does have a size limit and
2.) set a CellEditor on the JTable which uses this manipulated JTextField.
An easy way for 1.) is to create a custom Document (the internal data representation for text components, the M-part of the MVC -- see javax.swing.text.Document) that doesn't accept any text beyond a given limit, e.g.:
public class LimitedDocument extends PlainDocument {
private int max = 0;
public LimitedDocument(int max) {
    this.max = max;
public void insertString(int offset, String str, AttributeSet a) throws BadLocationException {
    // too long for the limit; get current contents, insert, and cut off trailing chars
    if ((getLength() + str.length()) > max) {
      StringBuffer buf = new StringBuffer(getText(0,getLength()));
      buf.insert(offset,str);
      remove(0,len); // remove current text contents
      super.insert(0,buf.toString().substring(0,max),a); // insert whole text
    // no problem, will fit
    else {
      super.insertString(offset,str,a);
}Then, in order to set the cell editor -- for example for the first column --, you can do as follows:
myTable.getColumnModel().getColumn(0).setCellEditor(new DefaultCellEditor(new JTextField(new LimitedDocument(5),"",5)));This will create a new DefaultCellEditor (see javax.swing.table) and initialize it with a given text field which will be responsible for any edition in this column. As the text field itself is created using a limit of 5, it should accept no text insertion beyond 5 chars.

Displaying dates as column headers for BEx Query

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the keyed in date in Bex Query Analyser. I'm able to display date as column heading for one column using text variable with replacement path.I could not able to increment date for other descriptions.Could you please help me to solve this issue.
Ex: Input Date 05/09/2007 then in the out put column headers should be 0509 0609 0709 ............ 1909
These are only column headers, values for the columns are quantities calculated using formulas.
It is urgent.
Thanks in advance.
Regards,
Mandadi.

hi mandadi,
if u want dates as headers only then u should use a text variable .
as a rule u can not set off set for text variable so u create restricted key figure with date restricted and set off set.
now u use this rkf to populate the text variable using replacement path.
text variable can use replacement path for replacing from any variable and characteristics.
bye

Slider + activating column switches for a column chart

Similar Messages

Maybe you are looking for