Slideshow and Multi-Projects

Windows 7 and CS4 Production Premium, LR3 and Acrobat X.
Encore CS4 :
Project "A": Slideshow to DVD. Set up the project (Encore CS4) with a main selection menu to allow the DVD viewer to either select manual advance or the complete set (all). I have been able to have one project for manual and one project for all but not as one project. For the "manual" selection, a timed menu is displayed explaining use of the remote's chapter buttons (|<<- and ->>|) to change slides and a return to the main selection menu is done with the title remote button. For the "all" selection the complete slide show begins directly from the main menu. Again title returns to this menu. When running the "all" operations, each slide may have a different required duration.
Q1: Any suggestions on how to do a one project for both?
Project "B": As per "A" but need to assign different audio clips on a slide basis. Some slides are group photographs. It is impractical to try to overlay a text description of the group individuals on the image. Need to provide an audio description of the individuals at the start of the slide and either cut it off on manual next/previous slide advance or have the slide duration equal audio length for the "all" main menu selection. The ideal support would be not only have the ability to have each slide have its own audio clip but to have another audio track to play the entire show length with ability to tone down or stop the full show audio track when a slide's audio clip plays.
QB1: Does not appear any Adobe product supports this function for slideshows (Encore or Lightroom). Have I missed something?
QB2: If I have not missed something (QB1), anyone have any suggestions on a product to use?
Project "C": This is a general one for either slideshows or video DVD presentations. Say I have two slideshow projects: one has its own selection "Main" menu to select "auto" advance in a travel slide sequence and the other, a menu to select manual advance for a scrapbook set of pages (each page a slide). Then say one video project with its own "main" menu to select chapters and/or subtitles for that sequence. Each project runs about 4 or 5 minutes.
QC1: Is there any way to have a "master" menu to allow a DVD viewer to select the first menu of each project? This would be nice since it permits more efficient use of the DVD media.

I'm not sure I understand, but I'll give you some reactions.
Project "A": Slideshow to DVD. Set up the project (Encore CS4) with a main selection menu to allow the DVD viewer to either select manual advance or the complete set (all). I have been able to have one project for manual and one project for all but not as one project. ...Q1: Any suggestions on how to do a one project for both?
I do not see an option other than making the slideshow twice, and including both in the same project. One is set to manual advance, one is set to auto. U Unless the slideshow is very long, this should not be a problem.
Project "C": This is a general one for either slideshows or video DVD presentations. Say I have two slideshow projects: one has its own selection "Main" menu to select "auto" advance in a travel slide sequence and the other, a menu to select manual advance for a scrapbook set of pages (each page a slide). Then say one video project with its own "main" menu to select chapters and/or subtitles for that sequence. Each project runs about 4 or 5 minutes.
QC1: Is there any way to have a "master" menu to allow a DVD viewer to select the first menu of each project? This would be nice since it permits more efficient use of the DVD media.
This is similar (assuming I understand what you are looking for). Make a menu with 3 buttons. One button goes to the video menu, one to the auto-slideshow, one to the scrapbook show. However, I don't see why you need the separate slideshow menus. The common method is a main menu in which you select the "play video", a bu tton for the video scene selections, a button for slideshow one, and a button for slideshow two.
Project "B": As per "A" but need to assign different audio clips on a slide basis. Some slides are group photographs. It is impractical to try to overlay a text description of the group individuals on the image. Need to provide an audio description of the individuals at the start of the slide and either cut it off on manual next/previous slide advance or have the slide duration equal audio length for the "all" main menu selection. The ideal support would be not only have the ability to have each slide have its own audio clip but to have another audio track to play the entire show length with ability to tone down or stop the full show audio track when a slide's audio clip plays.
QB1: Does not appear any Adobe product supports this function for slideshows (Encore or Lightroom). Have I missed something?
QB2: If I have not missed something (QB1), anyone have any suggestions on a product to use?
I do not see an option for per slide audio. Also keep in mind that a DVD can only play one audio track at a time. For example, when a "commentary" track is "added" to the audio from a movie, the DVD is playing back a single track - one that had to be specially edited with the original movie and the commentary. Your primary option is to create the slideshow in Premiere, adding what audio you want, but this will not allow manual advance. I don't know about other options.

Similar Messages

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

I created an iDVD through iMovie on one computer in my home and want to edit the slideshow and delete some videos on the iDVD. However, I want to work on my own iMac. Is there a way to "share" the original project through the drop box on my computer?

Sir Churchill, I tried deleting one of the playlists from my computer (Playlist 130). The next day I checked my wife's computer and noticed that Playlist 130 was now missing from her computer as well. Is there a way that I can delete a playlist from my computer without it disappearing from hers as well?

Project hang with multi menu and multi sub title

Dear Adobe
i am doing a project with multi menu and multi subtitle,
it is hanging at final build,
Thanks,

Are you transcoding before the build?
No error messsage; just a hang?

Can i make a project with photo slideshows and videos mixed?

Hi, I just bought my mac yesterday, i'm new at everything then. I want to know if i can make a movie with photo slideshows and videos in between. For example, i would like to place all my photos and videos from a trip in chronological order, so when i click play there's going to be like ten photos, then a 2minute video, then photos again and so on... which program or application do you recommend for this?

I want to know if i can make a movie with photo slideshows and videos in between. For example, i would like to place all my photos and videos from a trip in chronological order, so when i click play there's going to be like ten photos, then a 2minute video, then photos again and so on... which program or application do you recommend for this?
Per your description, this should not be a problem from within iMovie '08. Adding slideshows created in iPhoto (contain "Tween" tracks that iMovie '08 doesn't like) or dropping too many photos on top of a single video clip (iMovie '08 can be touchy about initial placement of dropped photos) can, however, create potential problems.

How to create a vi project with two ao channel and multi ai channel by customer/producer mode

I'm a ni elvis ii user.
i want to create one vi which include 2 AO channel output FGEN and multi AI channel acquisition signal，
and i wish use cunstomer/producer mode to realize this vi。
here is the vi，run this vi seveal secends，then pop-up with “完成该操作内存不足”
anyone can help me？
thx
Attachments:
demo.vi ‏191 KB

Hi steve ,
Sorry to say that you cannot configure and acquire from AI channels on a Device simultaineously from 2 seperate VI's.
regards
Dev

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Use of project view to group project records in multi-project report

I have a summary level multi-project report to report summary level information for active projects. We are using project view to organize our projects between departments and divisions (hierarchical structure) - represented by folders in project view. Projects are occasionally moved between project folders. If anyone has experience with report development using folder structure? My intent is to create grouping band based on folder structure and list projects under appropriate folder/band.
Any assistance is greatly appreciated.
I am using CM14.1 with OBIP 10.1.1.7
Thanks,
Prath

If you are creating a standard multi-project report (no retrieval criteria; project_state=0) and you run this report from within PCM, PCM automatically appends to your syntax the filtering criteria for the "folder" the user has highlighted in the project tree. In this case you would have one report that would retrieve multiple sets of data actively depending upon the project tree position. I have seen sometimes this causing issues with certain base syntax, but in general this should work.
Sounds, though, like you're building your report to call to the raw project_view tables, and Rick pointed out you need to use both of these tables then most likely.

FCP crashes, and opening and saving projects take too much time

Since my upgrade to FCP 5.0.4 I’m having trouble on several aspects of FCP.
I am using an Xserve raid storage, connected via fiberchannel to an Xserve with 10.4.4.
The editing computers are connected via fiberchannel and Xsan to the central storage.
FCP runs on an Apple G5, and my projects run from an external disk described as above. Al the other FCP scratch disk settings are also set on the external disks.
Example:
I’m using the FCP 5.0.4 with the multi-clip mode, and one of the consequences is, that my projects become relatively large. The larger they become, the longer it takes to open (up to 10 minutes) it and to save it (up to 2 minutes). Together with these problems, FCP crashes a lot.
I set my “auto-save” at an interval of 15 minutes, to prevent to loose a lot of work, but when it takes 2 minutes to “auto-save” each time, I loose a lot of time.
So when my project was 224 MB, I made a copy of my project, and opened it from a local drive. Opening the project took also 10 minutes. But when it was open, “saving” the project took only 15 seconds, instead of 2 minutes. The “auto-save” was still on the external scratch disk. “Auto-saving” still took 2 minutes. So I set the “auto-save” on a local scratch disk, and after that, it took only 15 seconds. Opening the project still took 10 minutes. And the FCP didn’t crash frequently.
My conclusion would be that the problems have something to do with the size of the project in combination with the connection with the external scratch disks. Is this correct? If yes, how do I solve this.
And if not, what else could it be?
Out of memory
Another problem occurred when my project was 327 MB. I had a multi-clip sequence of 100 minutes, with 4 camera angles and a lot of cuts and effects in it. When I tried to “nest” the sequence, it didn’t work and got the message: “out of memory” . Then FCP crashed.
When I opened the project again (it took 10 minutes), I could not save it anymore: ”out of memory”. So now I cannot work with this project anymore.
How do I solve this?
Is my project or sequence too big?
Another crash example
FCP crashed sometimes, when I switch my “Ëxternal Video” setting from “Blackmagic 8 bit” to “Firewire PAL”. Could this have something to do with it the problems I previously described?
Can anyone help me with these problems?
G5 Mac OS X (10.4.4)

I've run into a simliar problem and I believe I traced the issue down to the number of files on the drive. A drive I was using had over 600,000 files on it. Opening projects took 5+ minutes, saving took 2+, for a 15 minute simple project.
See if that is your issue.
Edit: 600,000 files on the scratch/capture disk.

Best approach for multi-team/multi-projects.

Hi,
I'm looking for the best approach to handle multi-teams/multi-projects scenario. We have 20 development groups and over 300 products. Each products on it's own Schedule.
Product X can be assign to Group A, but at some point, it can be assign to Group B.
We are currently using TFS 2012, but will be upgrading to 2013 soon.
Based on many reading, we are thinking to create only one Team Projects to ease management.
In it, we will create a team for each development group, but we will not create an associated area path with the name of the team.
- Group A
- Group B
- Group C
Than, we will create an Area for each product.
- Product X
- Product Y
- Product Z
and, we will create multi-level of iterations to match each Schedule.
- Product X
   - Release 1
      - Sprint 1
      - Sprint 2
- Product Y
    - Release 1
       -Sprint 1
    - Release 2
       -Sprint 1
The main issue, we have with this approach is that we can't use the Backlog or the Task Board effectivelly, as there is no way to filter per areas and iterations.
Reading "How do I change the underlying query for the task board (and backlog board) on TFS Preview", this doen't seam to be possible in TFS 2012.
In TFS 2013, "The Agile Portfolio Management: Using TFS to support backlogs across multiple teams" was introduced. Will this help to solve the problem?
We would create a management team for each development group.
We would create an agile team with an associated area for each product.
The only thing that I couldn't find in the documentation is how to re-assign an agile team to another management team. Is this possible?
Also can each agile team have their specific itérations, if so will it roll up properly to the management team?
Regards
SYSOTI
PS: Sorry couldn't post the links of the quoted text as I get the message: Body text cannot contain images or links until we are able to verify your account. ;-(

Hi SYSOTI,
Based on your description, seems the area path is not configured properly hence you can't use the Backlog or the Task Board effectivelly.
From the
Agile Portfolio Management: Using TFS to support backlogs across multiple teams, the area path is set as agile team which is a consist of team members but not a product name. For you scenario, you can set the area path name as your product name to
identify the associate products for work items. And the groups you mentioned for products in the team projects are sub-group of contributors.
Seems there is no need to create a management team for each development group since management team might be in a higher level to view the progress for all of the work across the agile teams. Certianly, you can create multiple management teams, but the management
teams will be able to view works for all agile teams.
If you have multiple teams and products, you can create a team project for each product if the products don't have much relationship. However, it's OK to manage the projects for multiple products in the same team project. And working within a single team
project also have benifits, you ccan check this
blog for more information.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Multi Project Reports

I am trying to create a multi-project report and am having an issue seeing it in PCM 14.
Here are the steps I did:
- Copied multi-project report for daily report
- Changed name to M_Dai_03
- I didnt really change anything in the report
- Logged onto PCM 14 Admin and imported reports
- Loggied onto PCM 14 and clicked print at the top
- Selected daily reports
- Only M_Dai_01 and M_Dai_02 show up
Any ideas what is happening? or steps I missed?
Thanks

In the BIP application there are four steps to copying an existing form or report:
1.     Save a copy of the data model of the source form or report under a new name
a.     Navigate to the form or report being copied and then locate the corresponding data model. Each report or form is associated with a data model. The default naming convention for the data models for stock reports and forms has each data model named the same as the associated form or report, preceded by “DM_”. The data model for the M_DAI_02 report, for example, is “DM_ M_DAI_02”.
b.     Click on the data model title, or on the edit link, to open the data model in edit mode.
c.     In Data Model screen click on the ‘Save As’ icon in the upper right corner of the screen and save the data model under a new name.
2.     Save a copy of the source form or report under a new name
a.     Click on the Catalog link in the upper toolbar and then navigate to the form or report being copied.
b.     Click on the form or report’s edit link.
c.     Immediately click on the ‘Save As’ icon in the upper right corner, and save the form or report as a new name.
3.     Associate the new form or report with the new data model
a.     In the newly named form or report, the data model link in the upper left corner of the screen will still point to the ‘old’ data model.
b.     Click on the search icon in the upper left corner to display a list of all the data models within this folder.
c.     Select the data model created in step 1.
4.     Replace the layout of the report with a layout named to match the report name.
a.     Within each report there is a layout which is typically named the same as the report. After saving the report under a new name and associating the report with a new data model, it is recommended to save a new layout named to match the new report name.
b.     Click on the ‘Edit’ link below the current layout
c.     Immediately click on the ‘Save As’ icon in the layout edit screen and save the layout under a new name which matches the report name.
d.     Click on the ‘Return’ button in the toolbar to display the old and new layouts.
e.     Use the Delete link below the ‘old’ layout to clear this layout. The report name, the layout name and the associated data model will now all match.
f.     Click the ‘Save’ icon to save this version of the report.
Hope the above helps.

Slideshow and navto-button

I have made my own table of content in a folio.
On this page I have a few slideshows.
There are a few picture you can swipe:
Now I make an button on top of this slideshow and create a navto: instruction to another article.
But now the slideshow doesn't work anymore:
To action on one place....
Is the a solution to create two interactive actions on one place?

note after you paste it there you need to give it the navto action again.
Not with this piece of magic: http://indesignsecrets.com/extension-deadens-pain-working-multi-state-objects.php
That said, navto: actions are pretty safe in this regard. It's the go to state actions that get lost.
Aad, I would suggest reconsidering this layout, as well, but I would kill that swipe action. It doesn't do what most people would expect it to do so either have it auto play or use buttons.

Create random order slideshow and burn to dvd

I am trying to create a random order slideshow and burn it to a dvd playable on a dvd player. I tried creating the slideshow in iphoto using the album mode, and was successful in creating the slideshow, but cannot save, export or burn. Would appreciate any help.

Thanks for your help!
I am trying to make a slide show of 900+ photos. I moved the photos from a CD into iPhoto. Originally I tried Magic iDVD, dropped the photos from the Event zone into the drop zones in Magic iDVD, chose a theme and previewed. The slides were shuffled from the beginning, and at first I thought that some of the themes allowed the shuffling of the slides as an effect. However, I did notice that the slides remained in the same order regardless of the theme chosen, but wasn't sure why this was the case. I then made the mistake of trying to eliminate a few of the slides and divide the slides more evenly between the two drop zones. I went back to the Event, opened the folder and selected the photos to be included and moved them to a new folder. From that point on the "shuffle" of the photos was gone and the photos appeared in the order in which they were taken. I spent several hours of trial and error trying to reinstate the shuffle, called Apple, talked with various Apple help and more expert users and finally ended up seeking help from the discussion boards where I found the post explaining how to create the shuffled slideshow in the Albums area of iPhoto . This is exactly what I am looking for--shuffled photos and random transitions! Unfortunately, it seems as though you can only view this slideshow from the computer. Now I am looking for another way to do the same thing. I am new to Apple, and trial and error is extremely time consuming and in this case not very productive. If there is a software program which will create a random shuffle (either Mac or Win) I can always create the shuffle and then import the photos back into the Events folder and create the DVD. Any help/ideas for a successful completion of this project are welcome! Thanks.

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

Database organizational tool for videos and slideshows and movies? (mac)

hi all,
i am a mac user who recently purchase Creative Suites and i am on a long march organizing my files into databases now that the office is set up and i am on Mac. i have one major remaining difficulty i am really hoping someone can steer me in the right direction.
i am trying to see if there is software or a database that would let me organize my videos/slideshows/movies etcetera.
since i have ported to mac from PC i am seeing the following file types in my "video + slideshow" folder: wmv, pdf, 3gp, avi. mov, mp4 and m4v - which is where i have temporarily gathered up all this information. my recollection is that these were either downloaded from the internet, created on some PC software or created using Keynote, Aperture or iPhoto. i am currently using Aperture to store my images.
i am also going to post on the mac forum but if there is an adobe product that does this exceptionally well i would be happy to buy it.
THANKS in advance for any help or advice on this.

hi curt,
thanks. apologies in advance for the long post and slightly off-topic explanation. i am trying to organize things a little better and right now i have way too much data and not enough help organizing it. basically i am trying to move to a database management workflow because there is too much to remember in terms of where my data is. also - it is not LINKED together very well and the workflow to produce the final product is a little disjointed. basically i don't mind using Spotlight to search for files to get it all organized but once i find all my data i would like to get it linked up in a way that is better than dropping it in folders.
can i please ask you how you /use/ bridge then? i mean, right now i am /exporting/ files from my IMAGE database and putting these into folders and then getting these files into the Photoshop (editing), Illustrator (raster work) and InDesign (formatting and linking) workflow. so now i have bulk files that were used to create InDesign posters (for instance). but this means that there is no organizational feedback to my IMAGE DATABASE in Aperture. i simply store the files in there and then i /export/ them to folders. the folders have organized images for each project and they have all the data associated with the project but this does not translate back to my image database unless i were to then go ahead and IMPORT the exported images from these folders and create a /new/ Project for these images which were used in this particular project.
do you know what i mean? i mean i have a database that organizes my images but then i use them external to this database and i am not going to /manually/ go through the database and TAG the images so i know they were used in so and so project. conversely - it seems like it is asking a lot of me to TAG the images before they go out of the database since i am /working/ and to keep track of all the data i am exporting to the desktop on the chance that i may use it - by TAGGING it for the project so that i can tell what was used in this project by looking in the database - just seems unworkable.
i mean, i have thousands and thousands and thousands of images and i have hundreds of projects and i am trying to figure out if there is a slightly better way to keep all this linked together in some way. right now my IMAGE DATABASE is basically divorced from my PROJECT FOLDERS.
i know that sounds off-topic but this also applies to my videos and slideshows and presentations. right now i have IMAGES organized in Aperture and i use these in a slightly more organized way because i am (now) preparing slideshows in Aperture so i have to organize the images in Aperture. but if i create a KEYNOTE presentation i am /exporting/ the images to the desktop, possibly re-arranging them, storing them in a folder and then creating a KEYNOTE presentation.
all of this seems very hinky and there is also the added problem that i have duplicated my images in many cases with some stored in Aperture and some stored on the desktop when i need them for a project.
i was hoping there was some pro that could tell me - "well, what i do is that i store the files in Lightroom, bridge them lets me see them when in am in Photoshop or AI or InDesign, then i OPEN the file from within Photoshop, edit it and Lightroom SAVES THE EDITED FILE and then i go into InDesign and bridge lets me see the files in Lightroom and i LINK THE EDITED FILE to my InDesgin poster and Lightroom automatically stored all the images for this poster in a dedicated folder for this project.
you know what i mean? i mean, if there was some linked aspect to bridge-LR-AI-PS and InDesign that let me avoid all this exporting from Aperture i would be really happy. then if i could store the resulting ID file or Presentation or Video or whatever with some kind of LINK to the original data this would be a huge improvement over here.
THANKS

Saving clips and combining projects

Good morning all,
I am a newbie so please forgive me if the questions sounds simple but I am having problems finding an answer. I previously used GoPro Studio however I purchased a Canon camcorder and I can't edit the files in GoPro. What I would like to do in Premier Elements is save highlight clips and combine projects. I record basketball games and make a highlight video of each game and also would like to save highlight clips of each player that I can combine at the end of the season. So, I am having issues with two things. First, I am able to create a highlight video of each game with no issues. However, I would like to combine several projects(games) at the end of the season into one project. I can open a project but how can I add a project to an open project. My second question. When I am editing a game how can I take clips of each player and store them into each players folder so I can use for a project at the end of the year.
Thank you!

roberttm
Please review and consider the following workflow which can be applied to sports and non sports events. It is not for just "high school" and has a wide range of applicability which can extend to slideshow media.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
There is a recent thread on this topic as it relates to sport events. I will give you the link so that you can follow that discussion and decide if any of the comments are of interest.
How to Cut, Label, Save sports clips (40Hours, 500GB, 1080p AVCHD Source) for creating season highlight video in Premiere Elements 13?
ATR

Slideshow and Multi-Projects

Similar Messages

Maybe you are looking for