Slideshow export plugin with HTML5?

Hello, is there available any plugin that would create simple HTML5 based slideshows? I guess while the appearance is a slideshow it would work as web gallery plugin.
Fade effect would be nice as transition, it should autoplay (with manual override), have some text fields for information. Comment feature would also be nice but I think that could be a separate snippet as I would not need a comment per image feature, plain common single comment area for the whole show would be enough. (Any pointers for simple comment tool?)
TIA.

iMac computer. Yosemite.

Similar Messages

Slideshow Export ends with long black phase

I am exporting a large slideshow from iphoto. The export goes through all the pictures and movies, but after the last one the progress bar is still only halfway completed and from then on shows a black thumbnail picture (or several ongoing) and hardly moves anymore.
Not sure if the export will eventually finish. This did not happen with small slideshow exports that I tested with 4-20 pictures.
Anybody had the same problem? Any suggestions where this is coming from and how to avoid it?

Thanks, I will try that but I've had some bad experiences with imovie, the pictures don't seem to render right and you cant see the expressions on peoples faces.
I can't be the only person who has tried to sync music and pics in iphoto, and yet there is no one else on the discussions commenting on it. I've even read a tutorial about adding a commentary to your photos in iphotos by working out the timing, so it must be possible. Someone put me out of my misery please!

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

After creating a new slideshow I export it with the setting HD 1080p it is then saved as a .mov i then create a dvd in idvd and the quality is not as good as the original photo's when viewed on the monitor or a TV, am i doing something wrong?

DVD's are only 640 x 480 (interlaced), so yes, the quality is not nearly as good. You should probably create your .mov in DV format to best match the DVD format

Slideshow export option plugin?

Does anyone know of a plugin to change the format of Slideshow export from mp4 to DVD format? Currently, I am converting the mp4's through DVD Flick, which works fine. It is just antoher step to do. It would be nice to just export it this way.

iMac computer. Yosemite.

Does the caption descriptions export along with exporting slideshows?

Does the caption descriptions export along with exporting slideshows ( iPhoto 09)?

George,
It sounds like the approach you are using is the correct one. This seems to be the cleanest solution to me especially since the customer is able to modify the generated SQL statements for their new system.
In order to preserve the AutoInc values I would recommend altering the table and changing the field datatype from AutoInc to Integer. Then export the table as code which will export the actual values. After the tables have been created on the new system they can change the field datatype back to an AutoInc type if necessary.
Regards,
Chris Franz

Simple way to insert custom Jquery Slideshows and Plugins in Muse

Hi guys, I know the Adobe Muse team is working hard to make this revolutionary tool better by the day. They have done a lot of foundation work to get this tool up to this state. I say congrates guys keep the good work on.
But before we get to the promised land. I know a lot of 'creative non-coders' still want to take up the challenge of doing some cool stuff spread around the internet nowadays such as jquery fullscreen image slideshow, fullscreen image jquery sliders, etc. But Muse is not there yet. I believe the next release will enable designers to take advantage of the height feature missing right now(I just believe so, no insider hint, please don't quote me.).
Okay let me not bore you.
Now I have noticed you can bring any slideshow into Muse if you have the bravery to do it. It's so simple. See this: www.dynamicarchitecturaldesign.com.
The slideshow was a backstretch jquery plugin with some custom javascript to load the page before displaying the page.
The trick is, follow the instruction provided by the author of any of this script, especially the ones relating to the jquery-1.4min.js... jquery-1.7.min.js... upto the latest version that could possibly be available. Note: Adobe Muse also have almost the latest version of the jquery plugin. So after authoring your stuff in Adobe Muse, export as HTML then move and replace any of the code provided by the author of the code you intent to use with the one that Muse generates always:
<script src="http://musecdn.businesscatalyst.com/scripts/1.1/jquery-1.7.min.js" type="text/javascript"></script>
This is often placed toward thge bottom section before the closing </body> and </html> tags. Move it up to the head section using notepad or DW. Though this is not the intended workflow by the Muse team, but it gives you the edge to do stuff you want to do.

Okay Maurya, am suggesting the Muse dev team can take a cue from the edge team. In the publishing setting of Edge their is an option for Framework via CDN! Introducing this feature into Muse will go along way to enhance the workflow of psuedo-developers using Muse to cut down on web design time. if I have some jquery codes for slideshows and so on that I have lifted from some places or purchased on the internet, I can conveniently place the codes as usual where they need to be and on export indicate to Muse whether I want it to include its own code:
"http://musecdn.businesscatalyst.com/scripts/1.1/jquery-1.7.min.jswhich has been further modified in the new beta 2 release as:
<script type="text/javascript">
if (document.location.protocol != 'https:') document.write('\x3Cscript src="http://musecdn.businesscatalyst.com/scripts/1.1/jquery-1.7.min.js" type="text/javascript">\x3C/script>');
</script>
in the export and during publish (a publish setting kinda of could be added to the preference area) or use my own framwork that I have included in the head section. So Muse will not include the above jquery musecdn... in the publish version. That way you are giving us more control and winning more developers over to Muse and of course more money for Adobe . See screnshot in Adobe Edge:

How to get the destination path in an photoshop sdk export plugin when using a batch action?

Hello,
I've written an exporter plugin (not save-as) that exports a given file to a custom format.
I was able to open a file selector dialog and choose a path that is then transported to the saving location.
Now my problem is: Another intended use is batch exporting many files. The user records an action with the export step and then applies a batch on it.
The PS batch window allows you to select the destination to be a directory where the exporter should write the data. Fine.
Now how do I get this path? When running in batch mode the silent flag is set for my plugin so I do not spawn a file selector dialog to annoy the user.
But I am also unable to obtain the path which was selected by the user in the batch window.
The SDK automation plugin Getter has some code to retrieve the path of the file and even that fails as it cannot obtain anything.
PropertyUtils.h has some PIGetWorkPathIndex and PIGetPathName functions but I always get 0 when asking PIGetNumberPaths, and get -1 with PIGetWorkPathIndex.
I would be thankful if somebody could hint me how I can retrieve directories.
It even seems impossible for me to get the path where the file is actually saved. The filter plugin called Propertizer utilizes a function called PIGetDocumentName but this only outputs the file name, not the full path.
(Just to be sure: The file on which the tests run is already saved to disk, if that matters)
Another fun part is: When I record an export step, what is the directory I am exporting into?

Ok, after lots of reading the sdk sample outbound I've realized that or plugin is broken.
When recording an action the outbound plugin stores the current path to gAliasHandle which is then recorded as a scripting parameter. Now when I execute the action I get the alias handle.
However how is this supposed to work with an export plugin and batch processing with a "destination" set to a target? Is this even possible or do I need to double click the export step in the action and "reset" the location even if that causes the entire exporter to run again?

CS6 Exporter Plugin doesn't open in Premiere Elements 11 (Windows)

I want to make my (Windows) exporter-plugin compatible with Premeire Elements 11.
So far, I have been gotten my exporter-plugin to appear in Adobe Premiere Pro CS6 and Media Encoder CS6, and the plugin runs there correctly.
I then followed the directions for running Premeire CS6 to create an export a preset file (*.epr). I copied copied that exported *.epr file to "OTHERS/MyCompany/MyPreset.epr" in my Premere 11 [App installation folder]. (As well as copying the plugin-binary *.prm to Plug-ins/common
In the <Publish:Share> tab, when I use the mouse to highlight 'OTHERS', I receive an error-dialog-box :
"Premiere Elements has encountered an error.
[..\..\Src\Exporter_Accessors.cpp-213]"   [Continue]
After I click continue, I don't get the dialog-box for my exporter-plugin. In the <Publish:Share> tab, I now see the warning-triangle and some text next to it: "Export Settings Invalid"

Hmm, I forgot about using Visual Studio's debugger. After some debugging, the error was triggered the first time the SDK_Exporter plugin called anything involving the <exportParamSuite>.
After a little more digging, I found that Adobe Premiere Elements 11 doesn't support the latest version of the exportParamSuite (kPrSDKExportParamSuiteVersion4).
In the CS6 SDK sample project SDK_Exporter, the function exSDKBeginInstance() grabs all of the suiteAPIs. The following call fails:
     spError = spBasic->AcquireSuite(
         kPrSDKExportParamSuite,
         kPrSDKExportParamSuiteVersion, // CS6 supports v4, but crashes in Premiere Elements 11
         const_cast<const void**>(reinterpret_cast<void**>(&(mySettings->exportParamSuite))));
The original-call returns an spError code of <kSPSuiteNotFoundError>, which is actually misleading. I changed the version-argument to v3, and the error-call went away.
     spError = spBasic->AcquireSuite(
         kPrSDKExportParamSuite,
         kPrSDKMemoryManagerSuiteVersion3, // compatible with Premiere Elements 11
         const_cast<const void**>(reinterpret_cast<void**>(&(mySettings->exportParamSuite))));
so it looks like Premiere Pro CS6 SDK's sample SDK_Exporter project requires a few tweaks to run with Premiere elements 11.

Plz help me. how i can use plugin with cs4

I want to use,
Carbon coder with adobe premiere cs4, how can i use it. it is not show in cs4.
what can i do for it?
Thanx in advance
Regards
Farrukh Shami
Faisalabad Photographer

It is actually export plugin in CS, CS2 and CS3 while it is not working with CS4.
It has an excellent Quality with low size, like Blue ray video. And with this tool, video size become very low.
In our country some photographers use it with Edius and premier pro. I dont know how to use edius etc.
But in CS3 it makes many problems.
Thanx for your help. I have seen your foto many times in many forums.Always your solutions are very good.

Slideshow exported to pdf: jagged lines

Although this issue has been brought up before in this forum, it has never been properly answered or resolved. Therefore, I will be pretty precise about the procedure in the hope that knowledgeable people will take a closer look at the issue.
For test purposes on this forum, I make a "slideshow" in LR 2.1 MacBook Pro using one single 10Mpx RAW image that has been pre-rendered 1:1 in Library. For this demonstration, the slideshow has no borders, no text, and 0 pixel margins in layout.
First, I play the slideshow i LR 2.1 so it shows full screen on my 1920x1200 SpectraView monitor, then, to make you see the result, I do a screen shot and then crop the relevant detail from the image, then 'Save for web' jpg to make it web friendly so you can easily see it.
The following image is the relevant detail of the full-screen LR image, namely a car (a very nice beautiful good-looking car, since it happens to be MY car:-)
(http://tmp.bragit.com/slideLR.jpg)
Then, in LR 2.1, I export to pdf, choosing Screen as resolution, which in my case is 1920x1200, at 100% quality, 'automatically show full screen'. Then I open the pdf in Acrobat 8.1.2, which shows it in full screen on my 1920x1200 monitor. Since the monitor matches the chosen resolution, the result SHOULD be at least as good as the way LR "plays" the slideshow, but preferably with some suitable amount of output sharpening.
However, the car in the image now has very ugly jagged lines. To make you see the result, I do again a screen shot and then crop the relevant detail from the image, then 'Save for web' jpg to make it web friendly so you can easily see it. (This jpg sRGB procedure has not affected the visual result of the artifacts in any relevant way.)
The following image is the relevant detail of the pdf-exported full-screen image, namely the car:
(http://tmp.bragit.com/slidePDF.jpg)
It should be pretty obvious that the result is unacceptable. It is not primarily sharpening that causes the jagged behavior, it looks more like a very bad resampling. Many people seem to have reported the same thing, so I wonder how come this hasn't been addressed at all in the last few versions of LR? Or do you really have a workaround?
PS: increasing resolution further (to for instance 3000x2000 pixels) on export does NOT solve the problem; it only makes the artifact somewhat smaller.

As to why I export pdf slideshows: there are three reasons and usages for this:
1. Making relatively small (eg. 900x1440) slideshows to be sent over email to people. For about a year I have noticed the quality is lousy, but I first thought it was because LR did a much too strong sharpening on export, but much later I came to realize that the problem has a much more severe origin. I took for granted that Adobe was trying to do something about it, but obviously not.
2. I can merge several pdf slideshows into one slideshow, so that I can have an Intro Screen at the start of each new "event", where each "event" may be only a few slides.
3. The native quality of slideshows as shown by LightRoom is lousy in deep shadows, just as bad as in the Library module, despite it has been rendered 1:1. It is ONLY in the Develop module that shadows are rendered decently, or on export to jpg, or export to a pdf slideshow (but the latter has other problems as I have shown above). So, to make the shadows better, and to avoid various problems with the Slideshow module (such as starting or stopping on the wrong image), I often export to pdf. In addition, color management can behave differently when displaying the show on a separate monitor or projector, where LR and Acrobat sometimes differ, especially on Plasma screens.
I have discussed the issue of bad shadow rendering before in this forum (long ago), and Jao thought it was due to a corrupt monitor profile, or at least an improper rendering intent, but I don't think so, and I showed screen shots so that everyone could see the effect. Some people only saw an almost black image, but that is because their monitor is bad. I have a very good monitor (SpectraView) that shows almost the entire Adobe RGB, and the profiling makes me able to see colors all the way down into the deepest shadows. Whenever color management is not working as it should, I see that immediately. It is in those shadows that the Library and Slideshow modules do a very bad job. Maybe the reason is that the previews are based on jpg, and jpg itself is extremely bad in shadows, usually causing severe posterizations.

Slideshow Exported to QuickTime Won't Play Music

I also posted this to the QuickTime forum, since I wasn't sure where it quite fit.
I created a slideshow using my iPhoto 5.0.4 then exported it to a movie as Quicktime, with music. It plays beautifully on my machine. I burned it to a CD and sent it to someone with the identical Mac (a PowerBook G4) and he couldn't play it on his SAME version of QuickTime. As he explained it, his Apple kept sending him to iTunes to search for the music, which it claimed it couldn't find even in the Music Store (odd, since I bought the music from my Music Store).
Similarly, another person trying to view the same iPhoto-created Quicktime movie on a PC (using a CD I'd burned), using a freshly downloaded of version of Quicktime, reported that the slideshow played but with NO music.
Any ideas? Thanks in advance!
Anne

HI anne,
It's a shame isn't it, but purchased music in a slideshow will do this.
You have to be smart and work around the limitation.
burn the song or an entire playlist while you are at it to CD. Import the CD back into iTunes. Now sort by date in iTunes so you can find the newly imported songs without the DRM. Name them so you know hey are the DRM-less tunes. Use that song with your slideshow to export.

Remove fade in/out from iPhoto slideshow export?

I'm bringing in some pictures from iPhoto and I've had bad luck with photo resolution when I used iMovie to import the picture and apply Ken Burns effects, etc. I've seen some suggestions here to use an iPhoto slideshow export instead.
I have my settings for 1 second slides, no transition and a ken burns effect. I'd like to make an export for each picture, but iPhoto insists on opening the slideshow with a fade in and closing with a fade out. Is there any way to prevent this? I'd like to add the transitions in iMovie instead.
(I realize that the iMovie forum might be a better place for this so forgive the crosspost)

Thanks, I think I'll skip the Ken Burns for now since I've had nothing but problems with it. My issues before were that 1) iMovie would play the images in sequence just fine during playback but at export would mix up the order. 2) The resolution on the pictures was absolutely terrible. I have a new movie now and haven't seen either problem.

IPhoto: Export videos with titles

All of my videos are in iPhoto, and I've added titles to all of the videos within iPhoto.
However, when I EXPORT these videos to my desktop, iPhoto doesn't export them with the titles that I've assigned to them in iPhoto.
iPhoto exports them with their generic title (such as "img_0015.mov") that they originally had when I first shot the videos.
How can I get iPhoto to export all of these videos with their titles intact?

Are you checking this checkbox in the slideshow settings pane?
which will give you this in the slide:
OT

Confused: Simple Export Plugin for several formats and sizes

Hi all,
I'm a bit confused about the Lightroom SDK structure - and the tiny documentation isn't helpfully at all...
I want to create a plug-in which exports several versions of each selected image (JPEGs in original size, thumbnails, etc.), TIFF-Versions, a copy of the Master-Image, etc to a specific directory.
I don't really know where to start - I explored the ftp sample plugin but but I can't find a hint where to tell Lightroom which different versions it should export.
Could anyone help me getting started? Is there anywhere additional documentation - beside the Manual and the API reference?
Thanks in advance...
Jonas

Hello Jonas;
I had a similar need and as far as I can tell, you can have lightroom export only one version of the image, but you can use that image create other versions. For example, I used imagemagic to create two versions of the original image scaled differently, copied them to a specific directory and then re-directed the exported image to another directory.
You may be able to kick off different export sessions with loading different settings(one for tiff, one for different sizes, but I have not done that, and others may be able to give some insight).
I think the easiest way is to use an external tool to generated the different sizes/formats for you and Lightroom only exports one of them, probably the one that is hardest(or needs more manual tuning) with external tools.

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

Slideshow export plugin with HTML5?

Similar Messages

Maybe you are looking for