SLM maintenance optimizer problems

Hi guys,
Into the maintenance optimizer, i can't update my systems.
Error : "System has not been registred in the SLM"
Procedure
1. Run transaction code /TMWFLOW/MOPZCFG;
2. Start the Multiple Software Lifecycle Manager Configuration Assistant;
3. Select an SLM or create a new SLM;
4. Choose "SLM Configuration" and register these systems in the SLM.
When i do this procedure,when i saved i had this message :
ICF Error when receiving the response : ICM_HTTP_CONNECTION_FAILED
When i do an SLM check :
The SLM Web services are unavailable.
In the sm59 my RFC HTTP created automaticlly doesn't work...
Could someone help me to correct my problem step by step ?
What shall i have to do first?
thanks

No problem for the help.
I'm glad to have help someone who can give me my first 6 or 10 points !
We had many problems in EHP1 SP18 and we found many notes that explain us that our problems will be solved in SP19 only, but i don't remember wich one...
I try to apply the documentation but i cannot configure the https accept because of the librairy libsapcrypto. The documentation tell us to go to download it on the website but we don't have the rights and you have to request this librairy to waldorf only !
With the sp19, the solman_setup appears and correct many problems, but not the SLM problems : services are unavailable !
Do you test your services in VA like i said ? Mine doesn't works...

Similar Messages

Maintenance Optimizer problem

Hello,
When i try to download support Package Stacks i am geting this problem
System Messages Type Message Text
Information Procedure 8000001413 Saved
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
Please help me
Regards,
Swaroop

Hi,
You (or someone with authorization) have already started the procedure in some other solution, and the SAP is not allowing 2 simultaneous procedures.
Enter Tx
/n/tmwflow/maintenance
and select (double click) the already stated transaction. Continue or cancel it.
Long-term solution:
In tx SPRO use CTRL+F to search IMG Activity "Assign Conditions to Status Values"
Execute.
Find the entry "SLMO SLMO0001 E0002 40 SYSTEM_ASSIGNMENT", change its message type (column "MT") from "Cancel" to "Warning"; then save it.
For more info see Note 1296589
Regards,
Nenad

Problem with Maintenance Optimizer...

Hello gurus,
I had a problem which I didn´t reached a solution...
When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
Help me please...! TKS
Best regards,
Joao Dimas

Hi Vijay,
When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
The link above, have you sure that's correct?
What´s the exactly name of document that you refer??
Thanks in advance,
Best regards,
Joao Dimas

Problem with Maintenance Optimizer - Solman EHP1

Hi All,
I have a solution manager 7.0 ehp1 system and maintenance optimizer does not work at all.
Initial configurarion and Basic configuration has been done - Tcode : Solman_Setup
A solution has been created and systems have been assigned to it, however when i launch create new maintenance
transaction it shows us the solution and the systems assigned under it.If i select our Production system and click on next
it comes up an error, saying the table does not contain any data. Do i need to do the SLM configuration for MOPZ to work?
Has anyone seen this error earlier. Any inputs would be of great help.
Regards,
Ershad Ahmed.

Hi,
Though the error does not give much insight. There are some warnings which tells that configuration has to be done
Please find the warnings attached in the email.
Not able to find an active SLM for selected managed systems
No configured SLM
No common SLM system is regsitered for Managed Systems
The system / systems - SID have not beed registered in SLM
Instance -type missing in SMSY for an application server instance of system .
Regards,
Ershad Ahmed

Problem with Maintenance Optimizer after first step

Hi all,
I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
Any ideas?
Regards,
Lazar Hristov

I resolved my problem.
I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
Regards,
Lazar Hristov

Problem Maintenance Optimizer - SAP GRS Access Control 5.3

Hi,
I have a problem in calculating the SPS to the SAP GRC Access Control 5.3.
I recorded the system automatically from SLD. I defined the logical component and I created the solution.
Now, when I try to calculate the Maintenance Optimizer error is generated:
No Addon Product Version allowed for transaction: SAP GRC ACCESS CONTROL 5.3 (01200615320900001673)
Program:CL_MOPZ_EVALUATE_INSTANCES====CP,Include:CL_MOPZ_EVALUATE_INSTANCES====CM00R,Method:CHECK_INPUT,Line: 67
Can you help me?
Best regards,
Diego.

Hi,
Check this note.
1464712
This should solve your problem.
Feel free to revert back.
-=-Ragu

Patch confirm problem in maintenance optimizer.

Dear Experts,
i had configured solution manager maintenance optimizer.
previously while starting i had a problem with
and it was solved.
After, going in to Solution_manager in the selected solution,
i had selected the server and component, for which i need to download the
support package files and upgrade my application components.
and after selecting the required files,i'm able to see the selected files in download
basket manager.But, i'm not able to see the files in popup coming to confirm the
components.
i have no idea on what went wrong.
i got stuck up here, since after confirming the selected packages,it will go to
Perform imlementation and to END.
anyway i had saved the status.
i request you to give your inputs for solving the problem.
one warning i'm getting while starting "solution_manager"
is as follows:-
Profile parameter icm/host_name_full is not set correctly (see long text)
thanking you in advance.
by
raghav

Hi,
I think you need to set the profile parameter "icm/host_name_full" in rz10 T-Code
in instance profile it should in the following manner <b>"host name of your server.your company name.com"</b>
e.g.:mycomputer.mycompany.com
Reward the points if useful

Problem with activating Maintenance Optimizer

I have reached the final stage of the configuration of the maintenance
optimizer. I have implemented all of the required notes in the MOPZ
collective note 1024932 (Notes 1008717 - HMTLViewer: Postdata of
length more than 255 gets truncated, (note 950975 is n/a for my system
we have SAPGUI 7.1), Note 975510 - Corrections for calls/interfaces
implmented incorrectly, and 1004691 - SNOTE:
OBJECTS_OBJREF_NOT_ASSIGNED when you implement a note, and the strongly
recommended note 997780 - Maintenance Optimizer: Checks that should
not be executed.
When I try to run the report SM_PREP_MAINTENANCE_OPTIMIZER after
implementing note 990534, I get the following error:
For object SOLAR, no sub-object SOLMAN_CONFIG is maintained
Message no. BL011
Diagnosis
An application log entry is to be made for sub-object SOLMAN_CONFIG of
the object SOLAR. This sub-object is, however, not maintained for
object SOLAR.
Objects and subobjects of the application log are created using
transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator
I have verified all of the steps in the document "Step by Step
Configuration of the Maintenance Optimizer". I have also done the
basic IMG settings under Solution Manager in the IMG. I did not
do "Activate integration with the Change Request Management". We are
not using Change Request Management.
Has anyone seen this type of message before? I could do the BC Sets manually but I want to use the report.

Thanks Lars. I opened a ticket with SAP and it looks like you can ignore this:
Hello,
You can ignore the message. It is displayed because when the report
runs we try to write the log to the sub-object SOLMAN_CONFIG, which does not exists with Support Package 9, due to it you get the message.
Regarding the 02 options to configure the Maintenance Optimizer it
just occurs becasue the report was not available with Support Package
9 of SAP Solution Manager, however due to the increasing number of
customers that required an easier configuration for the Maintenance
Optimizer we decided to make the report available through the note.
So there is not difference between the 02 configuration options.
The report does exactly the steps described in the alternative
configuration.
I'll give you full points!!

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

What is best practice for using Maintenance Optimizer to download SPS + EhP

SAP indicates in note 1095233 and many other documents that the best practice is to implement an EhP along with an SP Stack in the same queue. Furthermore, the only way to download the components of an EhP is via Maintenance Optimizer. However, in step 2 (Calculate download files automatically) you must choose either Maintenance (SPS) or Enhancement Package Installation (EhP); there is no way to tell Maintenance Optimizer that you want to download both SPS and EhP.
In developing the process for my team I circumvented the problem by saying to select Maintenance first to get the SPS into the Download Basket and follow that with selecting Enhancement Package Installation to get the EhP into the Download Basket. The plan would be to include all the downloads in the SPAM/SAINT queue with the expectation that SPAM/SAINT will be able to determine what must be included.
I'm wondering now whether that is a legitimate way to approach this and I am hoping others will share their process.
Thanks,
Terry McCann
Monsanto Company
St. Louis, MO

Actually, I don't believe you will get the entire SP Stack for ERP 6, you only get those pieces of the stack that are required for the Technical Usages you select for the EhP. I'm basing that on my observation that you get a different subset of the files making up the stack depending upon your TU selection. Also, note 1095233 specifically states:
If now the corrections included in the enhancement package 3 correspond to ERP 6.0 SP level 11, SAP recommends to update also the parts of your system to SP level 11 which you do not want to update to enhancement package 3 to achieve a consistent correction level in all parts of your application: SAP recommends to update all software components to the correction status corresponding to SAP ERP 6.0 Support Package Stack 11 with the installation of SAP enhancement package 3 for SAP ERP 6.0.
Thanks,
Terry

SOL MAN - Maintenance Optimizer

Hi all
I configured Maintenance Optimizer in Solution Manager 4.0 but when launching:
dswp -> change management -> support package stack - > maintenance optimizer
select product versrion
select system
-> continue
only procedure 8000000x saved displayed on status bar. No further screen is displayed.
I read note 1032322 and attached file Setup_Maintenance_Optimizer.zip
RFC connection is working well.
Is anything missing in customizing?
Thanks
R

Hi raffaele,
I'm getting problems with setting RFC connection. Can i get your help ?
topic: Maintance optimizer - connection settings
mail: [email protected]
Thanks in advance,
Dimitry Haritonov

Maintenance Optimizer

Dear all,
When starting "Create New Maintenance Transaction" in Maintenance Optimizer, an information message prompted:"Status profile SLMO0001 does not exist. Please checl." and the following messages are shown after:
Warning Customizing not available in logon language EN, use language EN
Error Status profile SLMO0001 does not exist. Please check
Error Status profile SLMO0001 does not exist. Please check
Warning Status values of procedure type SLMO not read
I tried to implement note#1090202, all succeeded except step 2(a). When adding in SOCM_ACTION_003 I have an error message:
Entry SLMO0001 does not exist in TJ20 (check entry)
Solution Manager Package Level:
ST 400 0013 SAPKITL423 SAP Solution Manager Tool Component Supp. Pkg.
Would anyone can help?
Many thanks!
Daniel

Hi,
i had the same problem and i solved it with note 1090202 this problem is caused because of a missing customizing setting.
I dont know how the creater of this thread could be so egoistically and mark this thread as answerded without posting the solution. I think this is a insolence.
( He mentioned the same not as i do, but he didn´t wrote that this was the final solution)
I hope i can help somebody with posting my solution!
BR
Stefan

Solution manager "Maintenance Optimizer" System Logical Component

Hello friends!
I have some troubles with my Solution Manager!
After SPS17 installation I don't see any system in SOLUTION_MANAGER transaction.
Steps for reconstructions:
1) start tcode SOLUTION_MANAGER
2) select my solution from list (the same like in tcode dswp)
3) goto Change Management --> Support Package Stacks --> Maintenance Optimizer
4) chose product version SAP ERP 6.0 (it is assigned to my solution)
5) in appears grid I don't see system (see below)
I----II--
I
I_V_I_System_I_Logical Component_I
Before installation I can select my solution. Now it's not critical because I can confirm downloads...

Hi Luke!
I didn't solve this problem...
But I've only one system in my solution, and, as I understand, it may not be showed. But I may be wrong...

Maintenance Optimizer - ABAP queue check failed

Hi guys.
When running Maintenance Optimizer for a SAP ERP 6.0 EHP4 which has SAP HR 604 installed, the following message is displayed
ABAP queue check failed
Error The Installation/Upgrade Package for Add-on SAP_HR rel. 600 is not available.
The goal is update toEHP7 SP2.
Not sure why is stating SAP_HR rel. 600 package is not available when the system has 604 release.
During packages selection, Human Capital Management is checked and on the source system is listed SAP_HR 604 SP12
The Solution Manager version is 7.1 SPS8, CR Content is updated to 9.9.
Also have applied SAP Note 1277035 Recommendations, releted to EHP4 Missing, but still no luck
This seems to be similar when SUM perform an EHP Inclusion, and cannot find the packages on the EPS Directory, but this is happening on the Maintenance Optimizer.
Is this a problem with SAP Backbone, or should i do some manual corrections on the system or Solution Manager to make it aware SAP_HR is at al level 604 SP 12?
Thanks!

Hello,
That type of error you describe is mostly always related to an issue in the SMSY/LMDB definition.
It is likely that the issue is a wrong product instance was assigned to the system.
In LMDB it is easy to check , even without verification checks (which sometimes may be the root cause, a bad verification check happens sometimes). If you go to the product system, then open the node technical systems -> AS ABAP -> Software, and go to the product instance tab (in SP10, product instance - details), when you select a given product instance , you see whether the software components that are part of it are installed or not (there is a frame in the lower part of the screen that shows the software components with flag 'installed' ticked or not). Chances are, one or more of the instances have few or no software components installed.
Mind you, you must keep at least one SAP ERP 6.0 product instance assigned, this would be the exception to the rule, but if you have an EHP4 for SAP ERP 6.0 system, it should be only one.
Best regards,
Miguel Ariño

Maintenance Optimizer Error "Value loss during allocation"

Hi Everybody,
like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new?
System is new installed.
SOLMAN_SETUP is executed.
BC Set for MOPZ are activeded.
SMSY is arranged.
MOPZ is aborting after calculation the target with
On Web:
The followin error text was processed in SOL the systm: Value loss during allocation.
The error occurred on the application server _______ and in the work process. 7
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_22 of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: HANDLEDEFAULT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
On ST22:
Category               ABAP Programming Error
Runtime Errors         CONVT_DATA_LOSS
Except.                CX_SY_CONVERSION_DATA_LOSS
ABAP Program           CL_MO_SMP_ADAPTER=============CP
Application Component SV-SMG-MAI
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CONVERSION_DATA_LOSS', was not
     caught in
    procedure "GET_2ND_CHECK_RESULT" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Value "01200615325000005298|01200314694900012246:01200314694900010013" was
     allocated in a field which is not long enough.
    Therefore the target field could not store all information of
     "01200615325000005298|01200314694900012246:01200314694900010013".

Hello Espartaco,
I have the same problem, too. Have there been a response to your OSS message?
With best regards
Frank Lehmann

SLM maintenance optimizer problems

Similar Messages

Maybe you are looking for