Problem with Maintenance Optimizer after first step

Hi all,
I have problem with Maintenance Optimizer after I choose system and save transaction, I click on Continue button, but nothing happens....
Any ideas?
Regards,
Lazar Hristov

I resolved my problem.
I activate from spro -> Initial Configuration II, then activate BC Set for mopz and now everything works fine.
Regards,
Lazar Hristov

Similar Messages

  • Problem with Maintenance Optimizer...

    Hello gurus,
    I had a problem which I didn´t reached a solution...
    When I create a new maintenance optimizer transaction and choose, on first step "Plan Maintenance", a type of Product Version I don´t have all systems which I configure on this Product Version on SMSY (System Landscape Directory).
    For instance: I configure in SMSY the Product version (group) SAP ECC 6.0 which contains three systems DEV ; QAS ; PRD.
    When I open/create a new maintenance optimizer transaction and choose the SAP ECC 6.0 I only see one system, the DEV system, within his, and I want to see all three systems which I configure in SMSY!
    Help me please...! TKS
    Best regards,
    Joao Dimas

    Hi Vijay,
    When I press in that URL - http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000679533& - does not appear anything about maintenance optimizer guide... it show me a notify "This folder needs to be reviewed" and I can´t see anything like you describe... I´m newest in SAP and still I have difficulties on search sometimes some things...
    The link above, have you sure that's correct?
    What´s the exactly name of document that you refer??
    Thanks in advance,
    Best regards,
    Joao Dimas

  • Problem with Maintenance Optimizer - Solman EHP1

    Hi All,
    I have a solution manager 7.0 ehp1 system and maintenance optimizer does not work at all.
    Initial configurarion and Basic configuration has been done - Tcode : Solman_Setup
    A solution has been created and systems have been assigned to it, however when i launch create new maintenance
    transaction it shows us the solution and the systems assigned under it.If i select our Production system and click on next
    it comes up an error, saying the table does not contain any data. Do i need to do the SLM configuration for MOPZ to work?
    Has anyone seen  this error earlier. Any inputs would be of great help.
    Regards,
    Ershad Ahmed.

    Hi,
    Though the error does not give much insight. There are some warnings which tells that configuration has to be done
    Please find the warnings attached in  the email.
    Not able to find an active SLM for selected managed systems
    No configured SLM
    No common SLM system is regsitered for Managed Systems
    The system / systems - SID have not beed registered in SLM
    Instance -type missing in SMSY for an application server instance of system .
    Regards,
    Ershad Ahmed

  • Problem with searching text after first paragraph

    Has anyone had problems finding text in a clob (with the contains() function) that is beyond the first paragraph?
    Is there some simple setting I've missed, or am I doing something wrong?

    You are doing something wrong.

  • What are the tasks we can do with Maintenance Optimizer

    What are the tasks we can do with Maintenance Optimizer?

    Hi,
    All Corrective Packages for SAP NW04 , NW04s and SAP Business suite delivered after 04/02/2007 will only be available via SAP Solution Manager MOPZ
    Also it Reduces risk, Increase transparency and Prepared for Future.
    Thanks
    Vijay Kothapalli

  • HT204490 OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    OS X Yosemite v10.10.3 Update - I had problems with my iMac after installing the previous update and I removed that update.  Have there been problems associated with this update ?

    I've been using it on all of my computer without any problems. Remember you won't see any positive comments here. Everyone here is complaining about a problem. If you want a good experience with any upgrade or update first make a backup from which you can boot the computer. If you are installing an update, like 10.10.3 for example, always download and install the Combo Updater - OS X Yosemite 10.10.3 Combo Update. Before you install any update or upgrade over an existing system you should do this:Repair the Hard Drive and Permissions:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.

  • Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

    dear sirs.
    i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
    when plugged to electricity it works but when unplugged sometimes work.
    please solve this issue by a quick update and thanks.

    I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

  • Facing network problem with iPhone 5s after updating it to iOS 7.1.2 .

    Facing network problem with iPhone 5s after updating it to iOS 7.1.2 , using Vodafone in india. if at one place network is full then after few minutes at same place i get no network ? what can be done ?

    Hi srikka,
    I'm sorry to hear about the issues you've been having with the iOS 8 upgrade on your iPhone 5s; I know how frustrating that can be, especially on a device you use every day like a smartphone. If you continue to have issues with your WiFi and cellular data connections, you may find the troubleshooting steps outlined in the following articles helpful:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    iPhone cellular data connection issues - Apple Support
    Regards,
    - Brenden

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

  • Problem with iWeb 09, after the publication in a local file.

    *Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
    After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
    Please help me.

    I want to activate the comments, it doesn't work neither.
    The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

    Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
    I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
    my new house is expansive so i wanted the extended range and airplay in each room.
    This is not told to customers, and utility doesnt show any issues.
    I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
    Any advice ?
    LJx
    Message was edited by: LJLDN
    Message was edited by: LJLDN

    Sorry couldn't change the detonations to Airport and am new so cant delete!

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

Maybe you are looking for