Slow index loading on mobile devices

Hi, my organisation is trialing the new RH10 multiscreen html 5 output.
Our techincal documentation includes a very large index (7000+ terms).
The index loads fine on a desktop (Chrome/FF -- under 5 seconds and IE8 -- over 10 seconds), however when we try to load the same index on a mobile device, it takes 2-5 minutes.
Is this a known issue?
Is there a way to fix it?
Suggested fix (if Robo devs are listening):
Create an option that outputs chunked index data in JSON format (currently XML) then parse JSON to the index tree loader for tree generation and search queries.
Thanks.
Here is the bug report I submitted:
Concise problem statement:
Very slow index loading (>3 minutes) on large indexes (7000+ terms). Does not seem to cache index data.
Steps to reproduce bug:
1.Create an index with over 7000 terms.
2.Generate Mutliscreen HTML5 output.
3.Open Index in mobile browser (Safari/Android)
4.Wait for entire index to finish loading.
5.Refresh index page.
Results:Very slow loading (>3 minutes). Does not seem to cache index data.
Expected results:Loads in under 1 minute

Hi,
Is the mobile device connected via WiFi or 3G? What mobile device are you using and have you tried others?
I suspect the sheer size of the index is the problem. Even if it works fast, nn index with 7000 entries is not very usable on a mobile device.
Greet,
Willam
tg_yshen <[email protected]>schreef:
>     
>Slow index loading on mobile devices
>created by tg_yshen in Multiscreen HTML5 - View the full discussion
>Hi, my organisation is trialing the new RH10 multiscreen html 5 output.

>Our techincal documentation includes a very large index (7000+ terms).

>The index loads fine on a desktop (Chrome/FF -- under 5 seconds and IE8 -- over 10 seconds), however when we try to load the same index on a mobile device, it takes 2-5 minutes.

>Is this a known issue?

>Is there a way to fix it?

>Thanks.
>     
>Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4695167#4695167
>     
>To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4695167#4695167. In the Actions box on the right, click the Stop Email Notifications link.      
>     
>Start a new discussion in Multiscreen HTML5 by email or at Adobe Forums
>For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Switching from Comcast DNS servers solve my slow image loading on WiFi devices?

    I have a Netgear C3700 N600 WiFi Cable Modem. I have two android devices that were being very laggy when I was connecting to my devices 5g connection when loading pictures. There was no packet loss and signal strength was high. The download tests show very high speeds. But anytime I went to Play Store, Facebook, or tried to surf the internet, pages or images would load in very slowly.
    This was happening on both my Android Devices running Android 5.1 and 5.0.1 (Nexus 6 and Galaxy S4). My C3700 allows me to changes the DNS server from the one provided from the cable company (Comcast Xfinity). After setting my modem's DNS to Google DNS servers ( 8.8.8.8 and 8.8.4.4 ) my issues were resolved! Now I'm just trying to figure out why this is the case.    Related: http://forums.xfinity.com/t5/Home-Networking-Router-WiFi/Xfinity-Wireless-very-slow-on-mobile-devices-only/td-p/2197456

    You may also want to download Namebench. It is a DNS server benchmarking program that will find the closest and fastest DNS server near you. Google's DNS are good but there are probably better and closer ones out there to you.

  • Web Pages not loading on Mobile Devices

    Browsing web pages not working on mobile devices
    I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
    I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
    previously i had adsl from bt and didnt have these issues.
    Solved!
    Go to Solution.

    Try turning Smart Setup off.
    http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
    Devices where there are known to be problems include:
    Some Apple devices including iPhone 5 and Apple TV
    some Android smartphones
    Xbox<
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Itunes 11.1 will not load apple mobile device

    Hi
    I downloaded i tunes 11.1 yessterday after upgrading my devices to iOS7.
    Initially 11.1 would not load stating errors were causing a rollback.
    I managed to get 11.1 loaded but now, no devices are recognised.
    I have uninstalled and reinstalled itunes 11.1 but no joy as after checking, I no no longer have Apple Mobile device listed anywhere in the common files.
    I have tried to download and install each individual part of the itunes package  which is okay until i try to install just the Apple Mobile device part whereby again, it just loads then rolls back stating errors.
    I have run registry cleaners after this and again tried re installing...nothing.
    It seems after looking here that i may need the Mobile device driver but, I cant seem to find, let alone be able to load it on my laptop...
    Has anyone got any ideas please, as after three hours of trying, its starting to get just a little annoying now??
    Thanks in advance

    Hi
    thanks but, this is for a Mac system and i have Windows 8.
    I have already tried deletng everything which is by Apple from the pc and reinstalled i tunes....
    Unfortunately, its still the same
    hence, its getting annoying ....

  • Failed to load Apple Mobile Device Support

    I updated to the latest iTunes and I keep receiving this error message. In order to fix it I've tried:
    Restarting the Windows Service
    Uninstalling Apple Mobile Device Support
    Different USB cables
    Different USB ports
    Reinstalling iTunes
    Restarting my iPhone
    Restarting Windows
    Nothing fixes it. My iPhone is no longer recognized by iTunes or other products such as iFunbox or PhoneClean. The iPhone will charge via PC, but that is it. The only other thing I can think of trying is reformatting my PC....  
    Again, this all started after I installed the newest iTunes. Any help would be great. Thanks.

    I had a similar (but strange) problem yesterday after installing (via Update prompt) iTunes 12.1. Everything looked OK but I found that my wife's iphone 4S wasn't detected by iTunes, but strangely my iphone 4S was.  Checked cable (same cable), checked connecting port on both phones, everything OK. Both phones were detected by Windows (8.1 64 bit). Decided to reboot both phones and the PC. Made no difference.  However, sometimes MY phone wasn't being detected either.
    Finally I deleted iTunes following this set of instructions http://support.apple.com/en-gb/HT1925 and reinstalled iTunes from a fresh download. Everything now working OK.
    Make sure you follow the sequence of uninstall processes before reinstalling.
    Hope this helps.

  • Some images not loading to mobile devices.

    So I'm having issues copying  few images form iPhoto on my iMac (Mountain Lion) to both of my mobile devices.
    These images used to be on both of my devices but for some reason have now disappeared from them and refuse to copy back to either my iPhone and iPad.
    I initially thought these images may have got corrupted somehow so I deleted them from iPhoto and replaced them with new copies. All of the files are in jpeg format and smaller than other files i have in iPhoto which copy to my mobile devices successfully. This had no effect which I find a little strange.
    I then tried the following, none of which has worked;
    1.     deleted my iPod photo cache
    2.     rebuild iPoto Library (each box was ticked and the repair/rebuild undertaken before closing iPhoto and moving on the the next repair/rebuild action)
    3.     Number 2 didn't work so I deleted my iPod cache again.
    4.     Disk utility  - verify & repair permissions
    I still think that it may be corrupt file issue as all of the images used to successfully copy to my devices in the past without issue.
    But if this was the case, surly when these images were deleted and replaced with new jpeg images (made from my master PSD of TIFF files via photoshop) they should then copy over successfully?
    confused.com

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?
    Post back with the result.

  • Unable to load Apple mobile device

    "Apple Mobile device errors"
    Says im missing MSVCR80.dll and need to reload itunes, but keep getting the same error.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Itunes 12 won't load Apple Mobile Device - says I dont have sufficient privliges

    Hi
    I have tried to install iTunes 12 but it hangs when trying to install the Apple Mobile Device.
    Service "Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient priviliges to start system services.
    Abort Retry Ignore
    Whatever I try fails and even after removing all details and files as Apple says it still doesn't work. Even going back to 11.4 fails in the same place and "Access is Denied" if I try and start the Apple Mobile Device Service.
    It doesn't then find my iPhone, so I am stuck.
    Anyone got any ideas. I have tried all the uninstalling and reinstalling several times now.
    Chris...

    I had the same problem. Use the uninstall feature to delete all of the Apple related programs that came with the recent download. There should be 3. Check the dates they were installed to be sure.
    DO NOT DELETE any folders manually unless you want to lose playlists, etc.
    Reboot your computer then reinstall. It worked like a charm for me!

  • TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

    I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

    Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
    Try a different port on the computer.
    Does the iphone beep when u plug it up. ?
    Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
    Delete the apple mobile device from your computer.
    Upgrade itunes to newest version.
    Is you USB cord defective ?
    Any USB 3.0 on your system ? .
    Delete or Disable  any antivirus program on your computer ?
    I will tell u the problem is your computer not the phone.
    We could do this for hours.

  • On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". They are all registered. Help

    On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
    It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.

    Try Here  >  AMDS  >  http://support.apple.com/kb/TS1567

  • Have begun having a problem - symptom is windows message saying "R6034 A program has attempted to load the C runtime library incorrectly.  I have re-installed Itunes, the installation failed with an inability to start apple mobile device service also.

    Itunes quit working after a failed Itunes update.  Don't know why the update failed, but afterwords I got an error stating
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the application's support team for more information.
    I removed and reinstalled iTunes.  This resulted a problem during the install - "Apple mobile device" service failed to start.  After ignoring this a couple of times, the install continued, ultimately resulting in failure, and the R6034 message showing up twice, once associated with iTunes.exe and once with ITunesHelper.exe.
    Also got "iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (windows error 1114)
    Can anyone help?

    Hello Skip Grantham,
    Thanks for using Apple Support Communities.
    it may be necessary to remove all traces of iTunes and related software components from your computer before reinstalling iTunes.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

    Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ITunes fails to load.  Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

    iTunes fails to load.  Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

    Dave, same problem here.  And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service.  It seems there is a bug with the newest update, period.  All of the normal "easy" steps don't work.  Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
    But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again.  This has worked for several people (I read the thread before posting).  Win 7 64bit.  It just seems that Apple did not thoroughly test this new version.   Period.
    If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on.  Total memory hog, even with 16G RAM and dual quad core processors.  It has to learn to play nice with others.
    After the scan and I'm sure an hour or two of work...I'll re-post. 
    Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right.  Depending on the size of your drive, this could take hours.  It is a matter of choice, of course.

  • HT1926 having problem up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

    I am having problems up loading Itunes, comes up that 'Apple mobile Device failed to start. Verify that you have sufficient privileges to start system services' how do i fix this??

    Hello hurleygirl63,
    Thank you for the details of the issue you are experiencing with iTunes.  I recommend following the steps in the article below:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • While loading ITunes Igot this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

    While loading ITunes I got this messege, Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. My question is, How do I verify if I have sufficient privileges?

    Hello hurleygirl63,
    Thank you for the details of the issue you are experiencing with iTunes.  I recommend following the steps in the article below:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Non-static method cannot be referenced from a static context

    Hey Im not the best java programmer, im trying to teach myself, im writing a program with the code below. iv run into a problem, i want to call the readFile method but i cant call a non static method from a static context can anyone help? import java

  • Adapter Framework Development

    Hi Guys, I am developing a Adapter based in Sample RA Adapter Code. In my solution appears the follow error: com.sap.aii.af.service.trace - not found com.sap.aii.af.service.cpa - not found I did download of jars from example (http://wiki.sdn.sap.com/

  • CR4E Question on PDF exports

    Hello, I am using Crystal Reports for Eclipse and I can't seem to find the answer to this quesiton in the documentation.  I am wondering if there is a way, using the CR4E JRC library, to run a report (my reports use POJOs in case that matters) and ex

  • Epson Stylus Photo 1400 not working on 10.6.5

    I've done just about everything I've found online and both epson and apple are in denial of this situation. I'd been on the phone with apple to almost two hours and in the end they tell me that it's probably epson's drivers and that I need to contact

  • Quicktime player on macbook air not working!!!!!!! HELP!!

    I have a macbook air and i can watch trailers on the apple website fine, but if i try to watch a keynote or something on the apple website, the quicktime player says its loading but never does and it makes my internet connection disappear for a coupl