Slow wifi speeds with airport extreme and win 7

i have an airport extreme router that i love. i recently noticed that my wifi was running slow. after performing a speed check i confirmed that my speeds were about 3-6mb/sec. this was done on my win 7 pro machine. while seated in front of my pc, i ran the same check using my iphone and i get 50mb/sec. this continues to be the case now for like a week. does anyone know if a recent windows update has done something. router has been restored to factory settings to no avail. when i first set up the router a few months ago, both machines were getting 50mb/sec downloads. not sure what has happened. any help would be appreciated.thanks

By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

Similar Messages

Very slow transfer speeds with Airport Extreme and MacBook

I have been using a new Airport Extreme without problem at my home for the past six weeks. The speed and range was excellent with both my MacBook Pro and the MacBook which I purchased a few weeks ago. I came out to Greece with both laptops and a new AP Extreme box for my home network here. After set up I noticed that internet access was lethargic on the MacBook and file transfer between the two computers was extremely slow. The problem seems to be with the new MacBook (although it was working well in London). I've done some speed tests and the internet download speed is only 48 kpbs! I also notice that the range is very poor--in the room next to the router I am down to five bars. If I connect to the AP Extreme with cable I get the full 1Mbps I would normally expect here in Athens (ADSL nominal 2Mbps). The MacBook Pro has no problems with wireless access speeds or range, so I am assuming this has to be a problem with the AP extreme card in the MacBook. Is there anything I have overlooked? Perhaps something to do with setting up the new AP Extreme here in Athens?

By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

Read/Write speeds with Airport Extreme and USB Hard Drives

Anybody know how fast the read/write speeds are with a USB hard drive and the Airport Extreme Base Station?
My Setup
I have a 17 MBP (2010) and a 13 MBP (2011) - no SSD's
MBP generally connect via 802.11n 5Ghz with a very strong signal
Gigabit connection on a Windows Desktop
I have a variety of external drives (7200, 5400, Drobo) at varying capacity (320GB, 2TB, 5.6TB)
Goals
Backup: Time machine
Backup: File copies of pictures and home videos (greater than 1GB files)
Backup: Crashplan
File sharing: Aperture libraries--not sure if that is possible or practical. That is something that I need to research further...but on the off chance people have experience with it.
Thanks!

ishjen wrote:
Anybody know how fast the read/write speeds are with a USB hard drive and the Airport Extreme Base Station?
Welcome to Apple's discussion groups.
Apple's AirPort base stations aren't known for fast file serving, but for most purposed they're fast enough.
I can't comment specifically on your Aperture plan, but with some software it's important to avoid simultaneous access by more than one user.

Slow Internet Speeds with Airport Extreme

I am noticing a dramatic slow down with my Airport Extreme. However, I have noticed this is an intermittent issue. Here are the specs of what I am running:
• Airport Extreme Base station that is plugged into a cable modem. The AEBS is routing the IP addresses.
• Plugged into the AEBS is an 800mhz iMac that is hardwired in. No slow down is noted on this computer.
• MacBook (Less than 2 months old) is connected to the AEBS wirelessly.
• iPhone is connected to the AEBS wirelessly.
Where I am having the problems is with the MacBook. I will have full signal strength and yet it takes for ever to load a page. Plus sometimes the connection will time out. As stated above this is an intermittent issue. Sometimes everything works fine, other times the connection has issues. All pieces of equipment are running the latest firmware. Does anyone have any suggestions to solve this issue?

I would recommend changing the wireless channel of the Extreme.
Open Airport Utility, and select Manual Setup. Note on the summary page what the channel is set to, most often it will be set to channel 6 (Automatic), but it could be anything between 1-11.
Goto the Wireless tab and adjust the channel so it several channels apart from the current one. If it is on channel 6, I recommend channel 1 or 11.

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

Loss of download speed using airport extreme and express.

I have Wifi using an Airport extreme base station and an airport express extender. However, the download speed drops from 21 Mbps to 8 Mbps. Any suggestions to boost the express other than an ethernet connection which would be difficult.

Temporarily, power down the AirPort Express and take speed measurement at that exact location.
Whatever that is.....likely in the 8-10 Mpbs range......is what the Express will try to "extend".
In other words, the Express can only extend the bandwidth or speed that it receives. It cannot make the connection that it receives go any faster. In that regard, the term "repeater" is probably a more accurate description of what the Express is trying to accomplish.
If you want the Express to extend faster speeds, then it must be located closer to the AirPort Extreme. In addition, anything that you can do to reduce any obstructions in the signal path between the AirPorts will help.
Ideally, you want a line-of-sight relationship between the AirPorts to help reduce the amount of speed loss that occurs with any wireless connection.

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Issue with Airport Extreme and 100mbps connection

Hi,
I have just upgraded my connection to 100mbps. Using a ARRIS TM 502G cable modem and the Airport Extreme I am able to get the 100mbps connection via either ethernet or wifi on my main MacBook Pro. However, the Mac Mini in the loungeroom (10 metres away from the Airport Extreme) is only getting speeds of around 25mbps.
Does anyone know why this might be or what I can do to resolve it?
Thanks,
Matt

The Mini was connecting at 20 - 25mbps via wifi.
The Macbook Pro was connecting at 80 - 90mbps via wifi (when in same room as Airport Extreme) and getting anywhere from 80 to 140mbps via a wired connection.
I've moved the Airport Extreme so it has the best "line of sight" to the Mini, and also disconnected a cordless phone I had in the room which was interfering with the signal.
After these changes I'm able to get speeds of 30 - 45mbps on the mini and similar speeds on my macbook if I move it next to the mini. It looks as though that's the best I'm going to be able to get without hard wiring the mini - which is disappointing ... unless of course you clever people have any other ideas?

Cisco router RVS4000 with Airport extrem and Time capsule.

Problem droping connection to internet when is Time capsule in extended wifi mode. When I turn off wifi on time capsule Airport extreme work fine.
Airport extreme and Time capsule is conected via ETH.
Any idea ?
Thaks
B.

If you use ethernet to connect the AE and TC .. you must NOT extend wifi.. you use Create a wireless network. And setup with same name and security. You are using roaming network.. not extended wireless.. if you want to use extended wireless no ethernet
see http://support.apple.com/kb/HT4260

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Help With Airport Extreme and External Hard Drive

I just purchased the Airport Extreme and I couldn't have been happier. I have attached my western digital external hard drive, but I have run into a slight problem/dilemma which I'm hoping someone who is apple savvy can help me out.
I live in a house with a couple of other guys and so I put all of my movies and media onto the hard drive so we can stream it throughout the house, but how do I make sure that someone won't accidently delete the files (The copies on the hard drive are the only ones I have)? I have tried to right click "get info" and change the sharing & permissions properties on the folders that I don't want deleted, but it doesn't save the changes or even allow me to select another option other than Read & Write. I formated the hard drive with the disk utility before I connected it to the AirPort so I know that it has nothing to do with the format of the drive. I also tried to create different user accounts for each roomate so that they could view the files (Read Only) but I get an error message explaining that if I continue, the contents of the hard drive will not be accessible. I'm sure its something simple but I'm obviously missing it.
Thanks!

Airport Utility under Disks/File Sharing has guest access rights.

Trouble with airport extreme and express

Hey all. I recently bought a new airport extreme and I'm now having problems setting up a network with the airport express. the airport express that we have is connected to a very old G3 iMac because it doesn't have an airport card and is upstairs. I have so far managed to set up the airport extreme so my G4 iBook and my MacBook Pro are both connected via wireless. The trouble seems to be that I can't get the next step set up as i'm not very experienced with networks and I can't get the express to establish a connection with the extreme. i hope somebody could help me sort out the next step. On a side note, this new airport extreme doesn't allow my xbox 360 to connect to it and i wondered if there is any way I can get it to connect again via wireless, either by changing a setting or the security?
Any help and feedback would be greatly appreciated,
Thanks.

applefan08, Welcome to the discussion area!
To continue to use the AirPort Express (AX) to give Internet access to the iMac G3, you will need to configure the 2 devices to use WDS to wirelessly connect. The instructions start on Page 41 in "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

Trouble with Airport Extreme and Time Capsule

Just got a new 2TB time capsule and added it to my network (existing Airport Express and Airport Extreme). All devices are hard-wire back-hauled to Linksys router. Set up was straight forward with no issues and initiated a time capsule back up without a problem. Within hours I noticed that the TC was no longer reachable in Finder.. Opening the AirPort utility, I saw that both the Extreme and the TC were "lost". Still had (green) internet connectivity, but the base stations were showing as off-line in the Airport utility.
Tried rebooting and checking from multiple other devices and no luck. Occasionally will find them both on-line in Airport utility, but seem to lose one (usually TC) after a short period. All are running the most up to date version of firmware (7.7.3). Prior to installing the TC, I had experienced 0 issues with Airport Express and Extreme.
Has anyone else seen similar issues? Are there settings that need to be accounted for in some way to avoid these frustrating "lost devices"?
thanks

Thank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ?

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

Extend range with Airport Extreme and D-Link DI-614?

Can I use an Airport Extreme and a D-Link DI-614 wireless router to extend the range of my network? If so, which router should be the main base station, and which should be the relay station?

...does anyone know the cheapest way to extend a wireless network?
Ethernet cable. Run an Ethernet cable between the 2 devices.

Slow wifi speeds with airport extreme and win 7

Similar Messages

Maybe you are looking for