Small size (A6) paper printing and toner leak(pouring out) issue

We have recently purchased 15 pieces of Hp LaserJet P1102w.
We are printing reciepts of size A6 (1/4 of A4). The use of printers are quite heavy - 200 A6 pages per day.(And no other formats)
After a month of usage we are expiriencing a huge problem. (Now it has been 5 printers in period of 3 weeks):
In Some random printers the toner is pouring out. First inside of the printer and then on the table (there is a convinient opening at the bottom). This happens on one side of the cartridge. And the affected drum is heavily dirty on that side.
We checked all kind of possible causes:
The retailer pointed us to this link, that states: "
HP does not recommend printing large quantities of small or narrow paper. Printing large quantities of small or narrow paper can cause toner to leak from the print cartridge and damage the printer or cause print-quality problems."
but this is for HP LaserJet 4200, 4300 Series Printers
http://webcache.googleusercontent.com/search?q=cache:vGQOfpKgjmUJ:h20564.www2.hp.com/portal/site/hps...
My question is: is it true that heavy printing of small paper size can cause this problem? And how probable is it?
What else could have caused this?
Thank You

Hi agniss,
I just sent you a private message.
If you are not sure how to check your post forum messages, this has instructions.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

HP Web Jetadmin, PC-CONNECTED printer and Toner level problem

HP Web Jetadmin 10.3.93994 (10.3 SR7) running on Windows Server 2012 (Microsoft Windows NT 6.2.9200.0),
HP LaserJet M1536dnf MFP is connected via USB to the computer with Windows 7 SR1 64.
The latest drivers installed, SNMP, HP SNMP Proxy_64_10_3_0010 and HPWSProxyService_10_3_1 installed.
HP ToolboxFX shows the toner level, the approximate number of pages remaining, cartridge serial number, etc.
HP SNMP Proxy is not working.
HP WS Proxy runs, HP Web Jetadmin displays all but the state of supplies - writes "not available".
File HPWSProxyServiceLog.log errors and warnings does not contain, at the level "All" has many lines of "Calling UIO for ..." with the result of "Status code is 200".
When printer as networked - this is no problem - Jetadmin shows everything including toner's level.
Does HPWSProxyService_10_3_1 support status of supplies (toner level) for printer HP LaserJet M1536dnf MFP?

Bump.
Does no one else use this printer and Web JetAdmin?

Watercolor paper printing and longevity

I want to print on 90lb acid free watercolor paper with my HP 6520 photosmart printer (564 ink). I wondered where I can I get information on how fade resistant and the longevity of the inks printing on this kind of paper? I found information about printing on photo paper. But that doesn't help me since I am printing on watercolor paper. I would like to know if the print will face in a couple years or decades. Thanks.

The expert in the subject of fade resistance is Henry Wilhelm, his site is here. There are lots of articles there, you may find some information on fade on watercolor paper. In general I would expect the fade to be worse than with photo papers. Photo papers may have coatings that "seal" the print, improving longevity. The 564 color inks are dye based. The document here may help, you can probably find others as well on the Wilhelm site.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP LaserjetPro M277dw printer and windows vista driver installation issues

I ust got the hot off the press HP Color LaserJet Pro MFP M277 which seems to be a miraculous machine. Just one problem. When trying to download and install the printer driver it goes through the whole process and then tells you the driver will not work with this operating system.
Hmmm. It says on the HP website that this is the correct software for this machine. I have been through at least 10 HP support people up to Level 3 support and hours of online work with HP people trying to install the software. The word I get back is that it will not work with my machine. So I am wondering if I have a Windows Vista 64 bit machine, and the software says it is for that machine, but it wont load, what machine will it work with? The last person I worked with just told me I will need to get a new computer. I thought I just bought a printer that would work with my computer, and now I am told i have to buy a new one?
Any ideas on how to get the software to load? I have some functionality, such as wireless network printing that one technician was able to get to work, but no scanning. Another technician changed all the permissions for installing various programming segments to "everyone" but that didnt work either. He had it so messed up that the it would not print anymore wirelessly either. I had to restore to an earlier date after that guy got off my computer so i could at least get some functionality back.
So, without the driver, I cannot scan to this computer, and i really dont know what other good things i am missing out on because I have never experienced the correct configuration......please help if you can. I need to send the machine back within a certain time period, and I really do think it is the solution for my business, if I could get it to work......Thanks!
PS Direct connection to computer and downloading software that way does't work either.....cannot use the printer directly connected.....

Hi,
Is it the following one ? If not, please download then try again:
http://ftp.hp.com/pub/softlib/software13/COL60646/kj-145845-1/HP_LaserJet_M277_PCL6_Legacy_Print_Dri...
By the way, what is the model of your Lasejet M277 printer ? Must be M277 something.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Consume external web service and experience connection timed out issue

Hi all,
I followed tutorial:http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html to consume external web service.
At step 2,substep 4, I experience the following error:
"DCA-40002: The WSDL document is invalid due to the following reason: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at:"http://www.webservicex.net/WeatherForecast.asmx?WSDL". Caused by : java.net.ConnectException: java.net.ConnectException: Connection timed out: connect."
I have tried to set up proxy:Tools > Preferences->Web Browser and Proxy. But it still doesn't work. Any idea?
Thanks in advance.
Regards,
weiyang
Edited by: user13304960 on Mar 15, 2012 8:42 PM
Edited by: user13304960 on Mar 15, 2012 8:43 PM

Hi,
Thanks for your reply. I have tried these 2 tutorials before. Both worked well. Publish an web service by myself, then consume it with a client. It works. But for this external wsdl published by USA weather forecast, it doesn't work. Navigate to http://www.webservicex.net/WeatherForecast.asmx?WSDL through firefox, and right response is returned. I wonder why connection timed out occurred and how to deal with it.
Could you please share your experience with me? Thanks.
Thanks.

How do I set the print and paper size in iPhoto 5

Can somebody please help. How do you set up iPhoto 5 so that you define both the the size of the print and the photo paper you use?
For example, I wish to print a 4.5cm x 3.5 cm photo on 6x4 (or 15cm x 10cm to keep all the units the same) paper.
I've seen a post saying how to do it in iPhoto 8, but the drop-downs are different.

I do not remember the locations in iPhoto 5 but there are probably three places to mess with
1 - set the paper size
2 - set the print size
3 - set the paper tray for the printer to use that has the paper size that you set in step 1
these may be in the print sequence or under the file menu as page set up (or similar). If these are not obvious try the Help menu
LN

9500 Mark II Printer and Photoshop (Mac) Quality and Media Grayed Out

I have a PIXMA 9500 Mark II. I am using the printer on an iMac. In Photoshop, when I choose Quality and Media, the area to choose paper type and tray are grayed out. It work fine in Safari.
I have spoken to Canon, Apple and Adobe and no one seems to be able to get it to work. It works in Safari.
Any suggestions?
Thanks

Hello larrygm.
Unfortunately, if you continue to have difficulties with accessing the printer settings, we would have to advise that you use our Easy PhotoPrint Pro plugin with Photoshop or print the image using a different program.
The Easy PhotoPrint Pro plugin can be downloaded from our website and is compatible with most versions of Photoshop. Once installed, you can access the plugin from the File/Automate menu of the program.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Problem with HP 3600n Color Laserjet Printer and new HP Notebook Running 64 bit Win7

I have a new HP notebook (dv7t-6100) with Core-i7 Processor, running 64 bit Windows 7 with all of the latest updates.
I also have a 27" iMac with Core-i7 Processor running 64 bit Windows 7 underneath Parallels 7. Parallels is a program that creates a virtual machine underneath Mac OSX.
Both versions of 64 bit Windows 7 work perfectly . . . EXCEPT, neither will print from my HP 3600n Color Laserjet. The iMac will print to the 3600n in OSX mode, and an earlier version of 32 bit Windows 7 under Parallels printed perfectly with this 3600n printer.
These facts prove that the printer is OK, the connection is OK. However, the 64 bit Windows 7 systems do not print.
In both of the 64 bit Windows 7 installs I allowed Windows to find and download the HP driver for this printer. Install of the driver was apparently successful. Still no printing.
One strange fact: Sometimes when I turn the computer off, the 3600n printer will print the items that had been in the queue before powering down. That is the only time it has printed anything . . . except under OSX on the iMac.
Does anyone know if there is a basic problem with 64 bit Windows 7 and this printer ?
Thanks for any help you can provide.

I just had the same problem with my MacBook Pro using 10.5.5 After trying a number of things, the following worked. (not sure what specifically ... just did this combination)
1. Had the Apple store Genius Bar folks install the latest HP drivers.
2. Restart computer
3. Restart the HP Color LaserJet 3600
4. Connected the HP printer and MacBook Pro directly into a switch, so the wireless was not an issue (both machines had IP addresses set and computer's was set to DHCP with manual IP).
5. Instead of using the System Preference printing and fax tool, I started Text Edit, typed something and said "print".
Print window came up and said "no printer selected"
6. I clicked on the drop down so it would look for printers.
7. It found the HP Color LaserJet 3600.
8. I clicked on the name of the printer and the computer went out and found the driver
9. I clicked on "Add" and it added the printer.
10. I tried a couple of test prints in different programs.
11. I disconnected the hard wired ethernet cables and set the computer to be on the wireless.
12. I printed a few more test prints in various programs.
I had previously tried selecting the printer and drivers through the System Preferences to no avail, but doing it this way worked.
Blessings

I'm trying to get the image to print correct size. i've tried center image, fit to media image, and they all come out the same size...smaller than the size in "image size". is this an Epson problem or Photoshop problem. Thanks!

I just got a new printer...Epson R3000...but have had this problem before. It's probably a simple fix, but I can't figure it out. I'm asking for printing on 8.5 x 11 and the image comes out 6.5 x 9.5 every time. Help please! And thanks!

The Epson site stated that the R3000 printer can print borderless however the quality will suffer in the expanded print area. Borderless is not supported on some heavy paper. To me the means your better off limiting you images size to the standard print area. There will be magins about 1/8" on the four sides so the print area on 8.5"x11" paper is 8.26" x 10.76"....
Take note of the print size set by the epson driver it may change depending on the paper type set. Note my first epson 4800 setup where I set 8.5" x 11" sheet paper from tray into the printer setting the driver set a smaller size for the paper which was reflected into the Photoshop Print preview. It shows paper is 8.499" x 10.999 with a small unprintable area across the top....
Paper
Use paper under normal conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single-sheets
Size
A4 (8.3 × 11.7 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
4 × 6 inches
5 × 7 inches
8 × 10 inches
11 × 14 inches
12 × 12 inches
Half Letter (5.5 × 8.5 inches)
B (11 × 17 inches)
A3 (11.7 × 16.5 inches)
Super B (13 × 19 inches)
Paper types
Plain paper
Special papers distributed by Epson
Thickness
0.003 to 0.004 inch (0.08 to 0.11 mm) in the sheet feeder
0.012 to 0.051 inch (0.3 to 1.3 mm) in the manual feed tray
Weight
17 lb (64 g/m2) to 24 lb (90 g/m2)
Printable Area
Note:
When printing borderless, quality may decline in the expanded printable area. Borderless printing is not supported with poster board.
Sheets
Top: 0.12 inch (3 mm) minimum
Left: 0.12 inch (3 mm) minimum
Right: 0.12 inch (3 mm) minimum
Bottom: 0.12 inch (3 mm) minimum
Roll Paper
Standard margins
Borderless printing margins
CD/DVDs
Caution:
Avoid printing in the clear plastic areas of your discs to prevent staining the disc with ink.

When using text edit, the font as it appears on the screen is ok, but when I print, it is much smaller on the paper than the chosen font size. How do I correct this?

When using TextEdit, the font as it appears on the screen is ok, but after printing, the font is much smaller on the paper than the chosen size. (in this case 14)
How do I correct this?

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

My home page and facebook games open with a very small window. The print is extremely small. How do I change the size of windows and print?

Even when I click on full size in my games on Facebook, the windows are not as large as they were in Internet Explorer and the print size is very small. I had changed the size of the print in IE, but don't know how to change it in Firefox. The same is true for my homepage.

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom

Can't duplex print B4 paper size with Snow Leopard and HP8100N

Apple print drivers dumped the standard European paper size B4 (see ISO 216 for specs) many OS's ago, however, I was able to duplex print B4, which is a standard size for the HP8100 trays, using the HP Duplexing accessory, by specifying a 'custom' paper size (10.14 x 14.33). Now, with Snow Leopard and the 10.6.4 and the updated HP8100 print driver from Apple, I get the message "The Duplex Option, Flip on Short Edge" is not available when the destination paper is set to Custom."
It seems the easiest solution would be for Apple to bring back the B4 paper size--I don't know why they eliminated it. The next solution would be for Apple or HP (whoever is responisble for the print driver) to back up to whatever allowed duplexing of custom sizes in all recent OS's up to Snow Leopard.
I have thousands of pages of music to print and manual duplexing just isn't an option. Anybody have any work-around ideas?

try converting your cmyk doocument to rgb and then print

How create Default Paper Size of 6" X 9" in Print and Fax System Prefs

I would appreciate help in creating a Default Paper Size of 6" X 9" because this size is not listed among the options for Tiger's Print and Fax in System Preferences. I mainly use my imac and Epson Photo R200 printer to print 6" X 9" formatted pages on 8 1/2" by 11" sheets created in MS Word. But without an Apple default for a 6" X 9" custom size, I run into all kinds of formatting problems, including the making of PDFs. My friend has a Windows machine that does have the 6" X 9" among its options, and she has no problem producing the results I am after. Thanks for helping!
imac G-4 Mac OS X (10.4.9)

You should be able to create a custom page size with these dimensions in the Page Setup Dialog (under Paper Size). After creating it, use the "Save As Default" under the Settings menu.
Hope that helps.

My Deskjet HP7610 can't sense the 11 x 17 paper on any of my Acrobat or Photoshop "fit to media" jobs. Why, after I've set every setting to 11 x 17 do both printer and computer cite "paper size mismatch?

My Deskjet HP7610 can't sense the 11 x 17 paper on any of my Acrobat or Photoshop "fit to media" jobs. Why, after I've set every setting to 11 x 17 do both printer and computer cite "paper size mismatch?

Mandeep5062 wrote:
Moving to Photoshop Forum
Try again.

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

On my iPhone 4s, I sent a picture via email and asked to size it down. However, it seems now that the pic stored on my iphone is now forever the smaller size which is not suitable for printing. Is there any way to get the larger size back?

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Small size (A6) paper printing and toner leak(pouring out) issue

Similar Messages

Maybe you are looking for