Smart forms - print program rvaddn01

Hi
Kindly some one let me know how to do smart forms for packing list layout using the standard print program
RVADDN01.Expecing a quick answer.
Thanks in advance.
Regards

Hi Surya,
The standard Smartform Layout is the LE_SHP_DELNOTE
And the standard Driver program is RLE_DELNOTE.
You can use these things for a Packlist.
Hope this works very well...
Cheers,
Sampath....

Similar Messages

Export Documents - Smart Forms - Print program

Hello,
I searched the sap notes to find standard print programs from SAP for the export documents with message type:
FECO
FETR
FEEU
The smart forms are easy to find.
They are FT_COM_FEEU, FT_COM_FETR, FT_COM_FECO.
But I don´t find the print programs belonging to the forms.
Greetings
Mark

If you look at the SMARTFORMS they are all blank.
I would create your own SMARTFORMS and call them in a similiar way as the example programs listed below :
SF_EXAMPLE_01
SF_EXAMPLE_02
SF_EXAMPLE_03
Hope this helps.
Cheers
Colin.

Smart form print program

hi,
im using version ECC 6.0.these standard programs /smb10/fm06p & /smb40fm06p
doent exist in my SAP.please help how to extract those programs,im working on purchase order.

Please refer note no 852250. Some workaroud is there. Some bugs are there you have to fixed the same download instruction given in zip file [attached in the note]

Regarding Smart Form Printing, Print Preview issues

Hi,
I have couple of issues regarding Smart Form Printing, Print Preview.
In my program i am passing below parameters to smart form function module:
t_control-device = c_printer.
t_control-no_dialog = space.
t_control-preview = space.
t_control-no_dialog = c_x.
t_output-tddest = g_spld.
t_output-tdimmed = c_x. " Print Immediately
t_output-tddelete = space. " Don't Release spool after output
g_user_settings = c_x.
Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
Here how can i go directly to layout output without preview screen.
Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
How can i solve these issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In the SAP menu screen goto System->User Profile->Own data
There in the defaults tab, for the output device give the value you had maintained for g_spld. This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
Tushar

SAP Vendor Master Communication Details for SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi Ravi,
I don't know about a function module, but the vendor master table LFA1 has a field ADRNR pointing to the general address table with the fields for e.g. language and to the tables ADR2 for phone numbers, ADR3 for fax numbers and ADR6 for e-mail addresses.
BR
Raf

Communication Details Vendor Master SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi,
class VMD_EI_API_EXTRACT with method GET_DATA could make it.
There are also some eSOA services that could make it fine. See services starting with Supplier*.
Otherwise, this is more complicated.
BR
Alain

Regarding Smart Form Printing

related to smart form printing :
I have to print the data using template , but i dont want to fix the line in template ,
i want to take the data in template , and how much data is accessed that much space
must be occupied on the page, i dont want to fix the area in template
Hope you have got me.
Edited by: rihano7 mansoori on Jul 13, 2011 2:48 PM
Edited by: rihano7 mansoori on Jul 13, 2011 2:49 PM
Moderator message: please choose more descriptive subject lines for your posts.
Edited by: Thomas Zloch on Jul 13, 2011 3:53 PM

Hi,
Do you intend to say , that template cell size should vary depending on your data.
I doubt that is possible.
You should look for a workaround.
Why dont you be more specific in your exact requirment, so that an alternate soln can be found.

Sap smart form printing error

hi!
I am trying to print one smart from through print program.
the name of smart form is ztestform.
and the name of the function module is /1BCDWB/SF00000099
I am writing following print program.
REPORT ZSMARTFORM.
data fname(30).
CALL FUNCTION '/1BCDWB/SF00000099'
EXPORTING
formname = 'ztestform'
IMPORTING
fm_name = fname.
call function fname.
and it returns with the error " function parameter form name is unknown"
so what should i do?
points will be awarded.
Cheers
Troy.

Hi Troy,
 Use FM SSF_FUNCTION_MODULE_NAME.
pass smartform name . it will give u SF function name. u call that fm.
Please refer this code :
data : p_form type TDSFNAME.
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = P_FORM
VARIANT = ' '
DIRECT_CALL = ' '
 IMPORTING
 FM_NAME = P_FUNCTION
 EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION P_FUNCTION
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
 TABLES
 D_VBRK = IT_VBRK
 D_VBRP = IT_VBRP
 D_LIKP = IT_LIKP
 EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards,
Hemant

Smart forms print with EPSON LQ-2500

HI all,
 I have a problem that my EPSON printer can not print all the lines of the table in Smart-forms. And always the same lines can not be printed. If I output the form with PDF Printer first, then, I print the PDF file with my printer, it would be quite well. So I think there should be sth. wrong with my programe or settings in SPAD. Is there someone can help me to solve this problem? Many thanks!

Hi Anji and Ravi,
thank you for your reply; in Quality and PRD the character format "H" exists
and in effect the format of text type A is correct.
Also the angular brackets are correct <\>.
Regards. Paolo
Message was edited by:
 Paolo Cavallini

Smart Form-Driver Program

Hi All,
         I have created a driver program and I have two smart forms , The thing is like from one driver program i want to executed two smart forms where logic is almost same for the both the forms.So put me some code lines if possible .
with regards,
Swathi.K

Hi swathi,
Yes based on conditions you can print the smartform in the driver program.
SELECTION-SCREEN BEGIN OF BLOCK block WITH FRAME.
PARAMETERS:
p_vintag RADIOBUTTON GROUP rad1,
p_contag RADIOBUTTON GROUP rad1,
p_rmctag RADIOBUTTON GROUP rad1,
p_rfrtag RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block.
   IF sy-subrc EQ 0.
*"For Vintag smartform................................................
    IF p_vintag EQ 'X'.
      w_form = 'Y_HFA_VINTAG'.
*"For Containertag smartform..........................................
    ELSEIF p_contag EQ 'X'.
      w_form = 'Y_HFA_CONTTAG'.
*"For Remanufacturedtag smartform.....................................
    ELSEIF p_rmctag EQ 'X'.
      w_form = 'YH_HFA_REMAC'.
*"For Reefertag smartform.............................................
    ELSEIF p_rfrtag EQ 'X'.
      w_form = 'YH_HFA_REEFER'.
Regards,
Sravanthi

Smart Form printing witout dialog box

Hi Experts,
I want to print the smart form when i execute the print program witout any dialogbox asking for printer name or other details.
I am using the following code. By using this i am not getting any dialog box, but its not printing anything.
DATA wa_outputoption TYPE ssfcompop.
DATA wa_controlparameters TYPE ssfctrlop.
wa_outputoption-tddest = 'INFO' .
wa_outputoption-tdnoprev = 'x'.
wa_outputoption-tdimmed = 'X' .
wa_controlparameters-no_dialog = 'X' .
wa_controlparameters-no_open = 'X'.
wa_controlparameters-no_close = 'X'.
wa_controlparameters-device   = 'PRINTER'.
CALL FUNCTION '/1BCDWB/SF00000116'
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    control_parameters         = wa_controlparameters
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
   output_options             = wa_outputoption
USER_SETTINGS              = 'X'
      v_whno                     = 'WN1'
      v_sttyp                    = 'ND1'
      v_plant                    = 'WN01'
      v_invrec                   = '1068'
      v_page                     = '3'
      v_invdt                    = sy-datlo
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
Please suggest a solution.

hi pankaj,
it looks fine, u r passing correct parameters only but just try..
just pass these parameters:
DATA: ST_CONTROL_PARAMETERS      TYPE SSFCTRLOP
st_control_parameters-device     = 'PRINTER'. "Output device
st_control_parameters-no_dialog = 'X'.       "SAP Smart Forms: General Indicator
I am using the same, it is working fine,
can u plese tell wht exactly happening.. is the dialogue is displaying or smethig else. r u calling this from only once or many time base on any conditions check once..r u passing right values..
call this FM before calling samrtform because u will face problems in PRD and Quality.. if u r already then ignore this.
c_formname = 'xxxx ut form name'.
v_fm_name is type rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_formname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
CALL FUNCTION v_fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
control_parameters = wa_controlparameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* output_options = wa_outputoption
* USER_SETTINGS = 'X'
v_whno = 'WN1'
v_sttyp = 'ND1'
v_plant = 'WN01'
v_invrec = '1068'
v_page = '3'
v_invdt = sy-datlo
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5

Dunning form print program and process

Hi Experts...
         Pls. can one help me in finding the dunning form(script) F150_BE_DUNN_02 print program.
     And also pls. can any one explain me about hw i need to modify the dunning form for different level.
my que. is do i need to modify form each level or i need to modify only in one form..
and also pls. can any one explain me hw dunning form will be printed.. (through f150 i know) but i cound not find any selection screen parameter as dunning level...
    .....PLS. DO NOT GIVE ME THE LINKS......i have been most of the links..
Full rewards will awarded..
Thanks
Yugi...

If you're lucky you can find the print program by entering the form in SE71, then Form -> Check -> Texts, Enter. The print program should be listed there. It could be SAPLF150. You'll need to get one of your Accounts Payable people to set up a test case for you in F150.

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Smart Form printing issue in repeate page

Hi,
We have one smartfforms printing some notification details in which Only one page layout is use and it is repeated again at one block Upper margin is 18.23 and Height is 9.60 CM on first page it is printing properly but on second page it is stating at Upper margin is 18.23 properly but not printing total height it is printing only two rows on second line.
how to solve it
the block is a interbal table and it is printing material and qty. of that table if material is more means there are more than 8 material then it is printing only upto 11 rows remaining rows it is not printing.
regards,
zafar

Hi zafar,
I searched SAP.COM for you:
[Smart Form Trace|http://help.sap.com/saphelp_nw70/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm]
Transaction Smart Form Trace, switch on, level 60 Fields. Process smartform. Analyze.
What is the remaining question?
Regards,
Clemens

Smart forms Print preview problem

Hi
Experts,
I am working in CRM2007. I am creating number of different type Smart forms for our client requirement. All Smart Forms working fine in WEB GUI. In Web GUI there have two buttons; one is print buttons and another one is Print Preview buttons. When we press print buttons it is directly go to printer for printing service order or service invoice or sales order or sales invoice whatever user is selected. Means working fine print buttons. And in case when we press print preview button it is open selected forms in PDF format; it is also work fine in our desire. But problem is here PDF format front size; which is very small. And after looking the PDF format if we select for print out of this PDF form; the print out orientation is Landscape and front size is very small. Now my question to all of experts u2026u2026u2026.How I change PDF front size and orientation? u2026u2026u2026u2026u2026u2026any type of BSP Enhancement or functional setting is required? Please Experts help meu2026u2026u2026u2026u2026u2026u2026u2026..
Regards
Tarapada D.

please CRM Experts give me some answer!!!!!!!!!!!!!!!

Smart forms - print program rvaddn01

Similar Messages

Maybe you are looking for