Smart View Refresh All and Hidden Tabs
When one of my users does a Refresh All in Excel all of his hidden tabs become unhidden. Is there a setting in Smart View that can stop this from happening?
Todd
If this is the case I would say we have a bug. Can you log an SR with all the details and steps to reproduce.
Similar Messages
-
In iOS 7.0.2 All and Missed tabs are not showing call history correctly
In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.Hello gnutellabrot
Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Smart view refresh versus Excel Retrieve
Good morning
we are currently converting our users from the old Excel essbase add-in to the new Smartview. We are having issues with some of our users when converting. Some of them were creating retrieves in their excel tabs, HIGHLIGHTING a section, doing their retrieves. This allowed them to keep any non essbase verbage they had on their spreadsheet (so they would not get the retrieve error messages). It appears with Smartview, that you cannot do this as highlighting a section now tells it you want to log into multiple cubes. Can anyone verify for me that highlighting and retrieving in smartview is no longer allowed?
thanksPrashanth, I think I definitely missed the part where it shows highlight and retrieving (I could see the multi grid, however that is not what highlight and retrieve is)
Consider this scenario
I've an excel sheet which goes from A1:D13 (that is my used range)
Are you saying that I can highlight a1:d6 and perform a retrieve and Smart View will only pull a1:d6? (which is not the case in 11.1.2.2.310, it refreshes full sheet)
Regards
Celvin
http://www.orahyplabs.com -
Hyperion Smart View Refresh gives Error
Hi
I have installed Smart View version 11.1.2 in my Client's computer having 64 bit Operating System.
Whenever he opens the excel file and click first refresh all the cells having HsGetValue formula shows "Error"
It gives the same Error in every cell even after disconnecting and connecting again.
Please help.So 11.1.1.3 smart view is not compatible for 11.1.1.3 HFM version for 64 bit OS.
This is not a true statement, please review documentation using the following link:
http://download.oracle.com/docs/cd/E12825_01/nav/portal_5.htm
Anyhow, if the "connection panel is blank", is because after installation you must recreate the connection by selecting a url connection using the following sintax:
http://yourservername/hfmofficeprovider/hfmofficeprovider.aspx , the selecting the appropriate HFM Cluster and database, plus user id and password to create the new connection. -
Performance issues when using Smart View and Excel 2010
Hello, we are experiencing very slow retrieval times when using Smart View and Excel 2010. Currently on v.11.1.3.00 and moved over from Excel 2003 in the last quarter. The same spreadsheets in 2010 (recreated) are running much slower than they used to in 2003 and I was wondering if anyone else out there has experienced similar problems?
It looks like there is some background caching going on as when you copy and paste the contents into a new file and retrieve it is better.....initially. The size of the files are generally less than 2mb and there aren't an expecially large number of subcubes requested so I am at a loss to explain or alleviate the issues.
Any advice / tips on how to optimise the performance would be greatly appreciated.
Thanks,
NickHi Nick,
Office 2010 (32 bit) only is supported.
Also check these documents:
Refresh in Smart View 11.1.2.1 is Slow with MS Office 2010. (Doc ID 1362557.1)
Smart View Refresh Returns Zeros (Doc ID 758892.1)
Internet Explorer (IE7, IE8 and IE9) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
Thank you,
Charles Babu J
Edited by: CJX on Nov 15, 2011 12:21 PM -
Smart View 11.1.1.2 Data Connection Manager empty
Hi all,
we recently trialled Smart View 11.1.2.1 with APS 11.1.1.2, only to find that combination is not compaitble.
However when we now go into the Smart View Connection Manager, and select the "All" view, nothing is listed ( i'd normally expect the Essbase Server listed ), however if the user has favourites, they are listed and work OK. Existing sheets also work OK.
I have the URL for the datasources as:
http://{server}:13080/aps/SmartView
If I browse to that URL with IE I get the confirmation page to say APS is running OK.
If I look at the apsserver.log file I see the error:
com.essbase.api.base.EssException: Common Provider null datasource error
Can anyone advise on how I can reset this?
Thanksyou will most likely have to use the dropdown and add the server into the shared connections. Once done, it should be there for all users. It is best to add it usiing an ID with Admin access. I think there is a bug that would allow anyone to do it, but I'm not sure what version that was
-
Hi,
I am not able to enter date in smart view by double clicking on the cell as we do in data forms.
Can you help me figure out why it is not happening in smart view???
I opened a form from smart view planning connection and entering the date.
Thanks,
SourabhHi,
You should write code in order to obtain this,
If v_date is your date field.
In the porgram logic you check for v_date+4(2)
If g_date+4(2) = '01'.
concatenate g_date6(2) 'JAN' g_date0(2) into g_date.
elseif g_date_4(2) = '02'.
concatenate g_date6(2) 'FEB' g_date0(2) into g_date.
elseif...................
then display g_date.
Regards
Madhu G S
Reward Points if usefull -
Smartview Refresh All in Protected Worksheet
Hi All,
After locked the cells and protected the worksheet. I clicked the icon Refresh All and I discovered the cells are not lock. How can I Refresh All and the cells in the protected worksheet are still lock?
Thanks,
MichaelLimit the refresh to those sheets you need either based on their name or on their index, For Example
Sub Refrsh()
'This will refresh the first 3 worksheets of you Workbook.
Application.ScreenUpdating = False
For i = 1 To 3
Sheets(i).Select
HypMenuVRefresh
Next i
Application.ScreenUpdating = True
End Sub -
I have Windows 7 Professional and I used to be able to move the curser over the Firefox Icon in the taskbar and it would show me a telescoped view of all open tabs, now it just shows the tab that I'm currently viewing. How do I fix this?
Hey MikeDo,
Do you have the option checked for ''Show Tab Previews in the Windows Taskbar''? If not, just go to ''tools->options->tabs.'' You can find more information on what each of these settings do in the Knowledge Base article [[Options window - Tabs panel]].
Hopefully this helps! -
How can I capture and take screenshots of all the browser tabs and not only windows ?
This class identifies all minimized windows and take a snapshot (screenshot) of them. I want to take screenshots also of all the broswer for example chrome tabs windows that are open but not in the front. Same idea that it get now the minimized windows but
to get the screenshots of the broswer opened tabs ! What should I change in the WindowSnap class? Since both classes are a bit long I added them to pastebin.com
What i'm doing now is to get all the minimized windows i mean all the the windows in the back if it's chrome browser windows or open tabs if it's program games other windows. This is what i'm doing in form1 constructor:
this.listBoxSnap.Items.AddRange(WindowSnap.GetAllWindows(true, true).ToArray());
int numitems = this.listBoxSnap.Items.Count;
for (int i = listBoxSnap.Items.Count - 1; i >= 0; i--)
string tt = listBoxSnap.Items[i].ToString();
if (tt.Contains(" ,"))
listBoxSnap.Items.RemoveAt(i);
listBoxSnap is just a regular listBox1 in my form1 designer.
And this is the WindowSnap class code, it's a bit long code but it's all connected:
I'm not sure what to show here from this class what is the most important part so i added all the class code to a link to pastebin.com:
WindowSnap.cs
What i'm calling/using in form1 constructor from this WindowSnap.cs class is the GetAllWaindows method:
public static WindowSnapCollection GetAllWindows(bool minimized, bool specialCapturring)
windowSnaps = new WindowSnapCollection();
countMinimizedWindows = minimized;//set minimized flag capture
useSpecialCapturing = specialCapturring;//set specialcapturing flag
EnumWindowsCallbackHandler callback = new EnumWindowsCallbackHandler(EnumWindowsCallback);
EnumWindows(callback, IntPtr.Zero);
return new WindowSnapCollection(windowSnaps.ToArray(), true);
EnumWindowsCallBackHandler is:
private delegate bool EnumWindowsCallbackHandler(IntPtr hWnd, IntPtr lParam);
EnumWindows is:
[DllImport("user32.dll")]
[return: MarshalAs(UnmanagedType.Bool)]
private static extern bool EnumWindows(EnumWindowsCallbackHandler lpEnumFunc, IntPtr lParam);
Then i have the class called WindowSnapCollection:
WindowSnapCollection.cs
The problem is in form1 constructor i'm getting only 23-24 windows in the listBox1. When i'm doing this two lines:
this.listBoxSnap.Items.AddRange(WindowSnap.GetAllWindows(true, true).ToArray());
int numitems = this.listBoxSnap.Items.Count;
I see in numitems about 30 windows and after filtering i'm getting 20 windows and i checked that's the correct number of opened minmizied windows i have in this example 20.
Now what i want to do is somehow to get with all this windows in the listBox also all the opened tabs in chrome.
For exmaple i have only 4 opened chrome windows. But in one of the chrome windows i have almost 40 tabs opened !
I want somehow to add to the listBox all this opened tabs also as captured screenshots like i'm doing now with the windows.
This is a screenshot of my program showing what i'm doing and what i get:
So now i have 19 windows captured in the next refresh it will show 20.
My question is if there is any way to capture also all the chrome opened tabs in all the windows if any opened tabs are opened at all ? Now i'm getting only the chrome opened windows captured screenshot. But i want to get also the chrome tabs captured screenshots.Hi Chocolade1972,
Since this forum is discussing about Windows Forms general like winform controls, and your issue is related with Windows Desktop SDK, I will move this thread to the more related forum.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
Hi,
Is there a setting in smart view, by which we can prevent the first auto refresh of data onto the excel sheet, immediately after the login?
Thanks,
AnindyoIn order to avoid SmartView trying to refresh the stored values automatically when the sheet is opened, set Excel's calculation mode to Manual (Tools -> Options..., select the Calculation tab and select Manual)
In Excel 2007 - this is under Formula -> Calculation Options.
HTH-
Jasmine. -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
The issue occurs like this:
1. Open a new window
2. Enter a URL and go to a page (any page).
3. Click the + and open a new tab.
4. The first tab is no longer visible in the tabs bar.
5. I keep opening lots of other tabs and the first tab stays invisible (all the others stay visible / accessible).
6. The only way I've found to return to the first tab is to close all my other tabs.
This doesn't always happen (i.e. I can have two firefox windows open and only one of them does it!)
I'm not sure if it's a feature or something? But it's very annoying!
Any ideas welcomed.
ThanksHi - yes I can! I hadn't noticed that little arrow before, thanks.
However I would really like to stop it hiding the first tab all the time.... Even when I navigate to the first tab using that "list all tabs" arrow, it still remains 'hidden' (i.e. I can't see a tab up the top, even when that tab is active. And when I navigate away from it to another tab, it is invisible again).
Any ideas?
Thanks -
Excel 2007 and Smart View 9.3.1.4.041
Dear Experts,
We are now working with Excel 2007 and Smart View 9.3.1.4.041, and encounter the problem that ervery time open the protected excel file there would be the warning message "Drawing Objectes in one or more sheet(s) in the workbook are protected. Please unprotect them and try to save again."
Can any one suggest with;
1. How to set the Excel security settings for Excel 2007 to work for smart view?
2. How to avoid the message mentioned above while working with Excel 2007?
3. How to create a protected Excel file to work with Smart View 9.3.1.4.041 both in Excel 2003 and Excel 2007?
Tks
Edited by: Moonlight on May 19, 2010 10:00 AMI've experiencied similiar problems, though other users may have found a better solution, I've unlocked the spreadsheat, refreshed, and then relocked via a VBA macro. A button object at the top of the spreadsheet was added to make it easier for the users use as well. If there is a better solution I am very interested in this as well.
JTF -
In the past, if I didn't have all of the tabs opened, or just opened a new window, the page would still be in a tab if I opened up new tabs. Now, if I hit the "+", I get a tab. I can't get back to the original page without closing all of the tabs.
Example: I open ebay.com in a window. I hit "+" and go to cnn.com. I want to go back to what I was viewing on ebay, and I can't see it, unless I close the cnn window.Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Options window - Tabs panel
* https://support.mozilla.com/en-US/kb/Options%20window%20-%20Tabs%20panel
* DO NOT SELECT '''When I open a link in a new tab, switch to it immediately'''
Check and tell if its working.
Maybe you are looking for
-
Hi, I have a question about iCloud. I have an ipod 4th generation and im getting a 5th generation. i have lots of games such as subway surfers and temple run 2. I worked and played really hard on earning stuff and have also made in app purchases. Doe
-
HI, In production boxes some of the JVM's are getting crashed while it's performing minor collections of gc. The trhead causing this crash is the GCTaskThread all the times. Using the following options.. -Xms2500M -Xmx2500M -XX:+DisableExplicitGC -XX
-
Camera raw 6.5 limiting crop size
When I load up a raw image in camera raw 6.5, CS5 - the cropping tool suddenly is not working correctly It limits the size of the crop that I can do. I used to be able to surround the entire image with a crop and then edit it smaller on each of the
-
hi folks, Anyone knows how to get better quality for charts graphics? I hurt that we should change something in BiBeans !! Thank you or your help!
-
Can you change font size in mailbox list
I can not see my full mailbox list, but if the font size would be smaller this could be solved. In itself I find the fonts too large. Is there any way to change this?