SmartView Reporting and Anaysis alert

We are trying to write VBA code to refresh a spreadsheet that is a downloaded document using a Reporting and Analysis smartview connection. Everything works fine, but we need to get rid of the "alert" that pops up after the refresh of the document completes. At the end of the refresh it pops up a msgbox that has the number of pages updated. We've tried to set displayalerts = false, but the msgbox still pops up and it stalls because it has to have user input. Has anyone encountered this and/or has a fix to get rid of it?
Thanks!
Edited by: Tsmith2 on Nov 4, 2009 4:17 PM

Both IDM and "show events alert" have very basic querying capabilities. The only thing you can do is to mark some signature with "traits" code and show alerts fired by this signature with:
sensor# sh events alert include-traits ?
<0-15> Traits to include in the show events output.
Try IDS Event Viewer. IEV is a free tool that can be downloaded from the Cisco website. But is very limited too. The primary Cisco product for viewing/reporting is the Cisco MARS. But it is expensive...

Similar Messages

  • Smartview- Reporting and Analysis URL not valid

    Hello,
    We are currently getting ready to Go Live with Hyperion Planning upgrade to version 11.1.2.2 and have been testing the new smartview version 11.1.2.2.310. Currently within our company, olur security policy does not let the regular User community hit a server name and a specific port. So for years for the general essbase connection we have been using a URL like https://planning.company.com/workspace/SmartViewProviders.
    With that URL I can establish a connection to Essbase and Hyperion Planning (the Forms). However when I try to connect to the Reporting Analysis and Framework, I initally get an error that reads "Cannont connect to the provider. The server name could not be resolved". When I click OK, I am able to see the Financial Reporting Folder structure, see the report names, however not able to run the reports.
    Is there any way to connect through a DNS entry that masks the server name and port??? OR is there a way on the back end to define the path for the Reporting Analysis Frame worksection so we can have it point to our URL instead of the actual server name?
    Any help or suggestions on this would be greatly appreciated!! We are going live with this in a couple in a couple weeks and this feature is something users have been waiting for.
    Thanks!
    Lindsey

    Has it ever worked, have you checked the logs,  have you logged into Oracle Support and had a look the documents available e.g. 1422178.1
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • CC4.0 - Management report and email alerts

    Greetings-
    1. In Abap based CC4.0, Managemnet Report tab is not showing any result.
    2. Email alerts are not reaching out to monitors email id.
    CC cockpit's config for enabling these looks ok. Pls suggest wat are the steps(and how to) required outside cc cockpit in this regard.
    Would appreciate your quick response.

    2. Email alerts are not reaching out to monitors email id.
    Did you check with your basis guy on SMTP server configuration in ABAP client (tcode SCOT)?
    Thanks
    Himadama

  • Report and Alert don't executed in the error handler with a JMS proxy service

    Hi,
    I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
    My error handler contains two main elements :
    - a Report action
    - an Alert with a JMS destination defined
    When the business service failed the message remain in the queue. It's the expected behavior.
    The problem is :
    - the report is missing
    - the alert is raised but missing in the JMS destination defined in the Alert setting.
    I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
    Unfortunately the message don't remain in the JMS queue.
    What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
    I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
    This solution is not convenient and I hope another solution is possible.

    Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
    wiki article on preparing your workgroup environment may require you to visit each machine individually.
    For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
    on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
    but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
    As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
    Please remember to click "Mark as Answer" on the post that helps you, and to click
    "Unmark as Answer" if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • Source IP for Reporting and Alerts in ESA

    Hi,
    We have a vESA with 2 listerners in the same subnet, so there is only a default ip route. All the alerts and Schedule reports are being sending using IP A (first listener), but the customer wants those e-mails to be sent using IP B (second listener). I have tried with content filters and altsrchost but it seems, this alerts are not treated as nomal e-mail. Is it posible to manipulate the IP address to sent the reports and alerts?
    Thank you 

    Hello,
    This can be achieved under the following :
    C370.lab> alertconfig
    Not sending alerts (no configured addresses)
    Alerts will be sent using this configured From Address: [email protected]
    Cisco IronPort AutoSupport: Disabled
    Choose the operation you want to perform:
    - NEW - Add a new email address to send alerts.
    - SETUP - Configure alert settings.
    - FROM - Configure the From Address of alert emails.
    []> setup
    Initial number of seconds to wait before sending a duplicate alert.
    Enter a value of 0 to disable duplicate alert summaries.
    [300]> 
    Maximum number of seconds to wait before sending a duplicate alert:
    [3600]> 
    Would you like to enable Cisco IronPort AutoSupport, which automatically emails system alerts and weekly status reports directly to Cisco IronPort Customer Support?  (Enabling AutoSupport is recommended.) [N]> 
    Maximum number of alerts to save:
    [50]> 
    Choose the default interface to be used to deliver alerts
    1. Auto
    2. cisco123 (2.2.2.2/24: abc.lab)
    3. test (1.1.1.1/24: lab2.lab
    [1]>
    Regards,
    Mattew

  • SmartView connection for reporting and analysis

    Anyone else using version 11.1.2? We have installed SmartView and there is not an option to change service provider so that we can connect to reporting and analysis. We have successfully connected to the HFM office provider, however when entering the listxml URL for reporting and analysis like we entered the HFMofficeprovider it cannot connect. Oracle has advised us there is supposed to be the ability to add a service and we are missing that. They have advised that we run the EPM configuraton again, however we dont think that will help since we have run this a few times already. We are waiting feedback but just reaching out if anyone else has or had this issue
    Edited by: jshoe on Jun 17, 2010 1:35 PM

    With 11.1.2, Smart View uses Workspace to keep track of the Shared Connection providers (including R&A). It should show up as "RAFramework - 11.1.2 - Reporting and Analysis Framework".
    R&A registers with workspace when it is configured. In order for workspace to pick up this regsitration, you have to re-run the configuration for the Foundation tasks of "Configure Logical Address for Web Applications", "Configure Oracle Configuration Manager" and "Configure Web Server".
    I would then re-boot the server for the changes to take affect.

  • SCOM 2012 Closed and Open Alert Reports

    Dear all,
    In SCOM 2012 R2 how to Generate a report that contain open and closed alerts for past 24 hours. Is there any inbuild report ?
    Thanks,
    Sengottuvel M

    Yes, you can this with Report "Alerts" (http://technet.microsoft.com/en-us/library/hh212929.aspx)
    Regards,
    Stefan
    www.sc-orchestrator.eu ,
    Blog sc-orchestrator.eu

  • Ora-07445 reported in the alert log file

    Hi all,
    We are using the following platform:-
    OS: Solaris Operating System (SPARC 32-bit)
    Oracle Server - Enterprise Edition / Product Version: 9.2.0.5.0
    We encountered the following problem:-
    There is Ora-07445 reported in the alert log file.
    "ORA-07445: exception encountered: core dump [kgghash()+308] [SIGSEGV] [Address not mapped to object] [0x3222
    000] [] []reported in the database."
    These errors are signaled in more than 3 independent, unexplained, occurrences every day.
    When this error occurred while User was accessing the application system, by right the case will be shown on the system, but they were no case found.
    alert log are as below:-
    Fri Jul 27 09:12:30 2007
    Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27371.trc:
    ORA-07445: exception encountered: core dump [kgghash()+340] [SIGSEGV] [Address not mapped to object] [0x3184000] [] []
    Fri Jul 27 09:22:10 2007
    Thread 1 advanced to log sequence 10730
    Current log# 2 seq# 10730 mem# 0: /disc3/oracle9205/RFDB/RDO/logRFDB2a.rdo
    Current log# 2 seq# 10730 mem# 1: /disc3/oracle9205/RFDB/RDO/logRFDB2b.rdo
    Fri Jul 27 09:29:26 2007
    Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27372.trc:
    ORA-07445: exception encountered: core dump [kgghash()+296] [SIGSEGV] [Address not mapped to object] [0x3182000] [] []
    The applications have encountered ora-3113 after a short period of time followed by ora-3114.
    application log:-
    RF0120-1 2007-Jul-27 09:46:57] Load m[RF0120-1 2007-Jul-27 09:29:30] SQLCODE: -3113
    [RF0120-1 2007-Jul-27 09:29:30] Error Code -4105 returning from get score pan no.
    [RF0120-1 2007-Jul-27 09:29:30] Message type :120
    [RF0120-1 2007-Jul-27 09:29:30] Primary Account Number(PAN) DE0
    02 :5440640155262702
    [RF0120-1 2007-Jul-27 09:29:30] Processing code DE003 :003000
    [RF0120-1 2007-Jul-27 09:29:30] Transaction amount DE004 :000000000001
    [RF0120-1 2007-Jul-27 09:29:30] Settlement amount DE005 :000000000000
    [RF0120-1 2007-Jul-27 09:29:30] Transmission Date and time
    DE007 :0727092717
    [RF0120-1 2007-Jul-27 09:29:30] Settlement conversion rate DE009 :60263158
    [RF0120-1 2007-Jul-27 09:29:30] System trace audit no. DE011 :754710
    [RF0120-1 2007-Jul-27 09:29:30] Local transaction time DE012 :092717
    [RF0120-1 2007-Jul-27 09:29:30] Local transaction date DE013 :0727
    [RF0120-1 2007-Jul-27 09:29:30] Expiration date D
    E014 :0712
    [RF0120-1 2007-Jul-27 09:29:30] Settlement date DE015 :0727
    [RF0120-1 2007-Jul-27 09:29:30] Merchant type DE018 :5311
    [RF0120-1 2007-Jul-27 09:29:30] Point-of-service(POS) entry code DE022 :051
    [RF0120-1 2007-Jul-27 09:29:30] Acquiring inst. ID code DE032 :001912
    [RF0120-1 2007-Jul-27 09:29:30] Forwarding Inst. ID code DE033 :001912
    [RF0120-1 2007-Jul-27 09:29:30] Retrieval ref. no.
    DE037 :754710356390
    [RF0120-1 2007-Jul-27 09:29:30] Autholization ID response DE038 :356390
    [RF0120-1 2007-Jul-27 09:29:30] Response code DE039 :00
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor terminal ID DE041 :19306002
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor ID code DE042 :000001106
    020132
    [RF0120-1 2007-Jul-27 09:29:30] Card acceptor Name/Location
    What could have caused the above mentioned errors i.e Ora-07445 ; ora-3113 / ora-3114? How to resolve the problem.
    Please help .
    Thanks.

    i am also facing the same some time in ora 9.2.0.6 on Sun OS 9 SPARC 64-bits
    Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6076.trc:
    ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
    Thu Aug 30 08:52:39 2007
    Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6078.trc:
    ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
    Thu Aug 30 09:41:49 2007

  • SolMon 3.2, Difference between SolMon report and Service .sap report?

    Hi Guys,
    last week i found one strange thing, there are differences between the reports of our local SoMon server report  and report from service.sap (service message).
    why there will be difference like this, Please help me in this regards.
    Regards
    Srini

    Software Components for SAP Solution Manager 4.0 as of April 2007.
    SAP_BASIS 700           Basis Component
    SAP_ABA       700           Cross-Application Component
    PI_BASIS  2005_1_700     PI_BASIS 2005_1_700
    ST-PI     2005_1_700     SAP Solution Tools Plug-In
    SAP_BW    700           SAP NetWeaver BI 7.0
    SAP_AP    700             SAP Application Platform
    BBPCRM    500           BBPCRM
    CPRXRPM   400           SAP xRPM/cProjects/cFolders 4.00 (ABAP)
    ST        400           SAP Solution Manager Tool
    ST-A/PI       01I_CRM500    Application Servicetools for CRM 500
    ST-ICO       150_700       SAP Solution Manager Implementation Content
    ST-SER    700_2006_2    SAP Solution Manager Service Tools
    ST (Solution Manager Infrastructure, tx solution_manager, SOLAR01)
    ST-A/PI (Download modules to get data for service sessions, monitoring)
    ST-ICO  (Implementation Content - Business Process Repository)
    ST-SER  (Service Sessions as EarlyWatch Alert, SAP GoingLive Check, Setup System Monitoring, Central System Administration, Setup Business Process Monitoring, Service Level Reporting, ....)
    See also SAP Notes:
    - 707705 (www.service.sap.com/sap/support/notes/706705) for an explanation on Components for Messages (with lots of key words).
    - 394616 (www.service.sap.com/sap/support/notes/394616) Release strategy for SAP Solution Manager
    Best regards
    Ruediger

  • VBA to pull from Financial Reporting Studio/Reporting and Analysis Framework

    Hi all,
    I just started using Financial Reporting Studio, and I did a lot of research online to try to answer the questions I have below but to no avail, so I'm hoping I can get answers from the experts here.
    1. I was wondering if it's possible to use SmartView VBA to pull a report from the "Reporting and Analysis Framework" onto Excel? If yes, how?
    2. When I tried to pull lots of data from "Reporting and Analysis Framework" onto Excel using SmartView, it keeps getting the error message "New report failed to insert properly". Is there a way around this? Essentially, what I'm trying to do is pull the Expense data (Actuals, Budget, Forecast) from year 2011 to 2015 (by month) for every department (with each department being on its own worksheet using the split feature). If I reduce the number of departments or columns, it'll work, but when I try to keep everything, it fails.
    Thanks for your guys' help!

    Hi there,
    There is VBA manual for smartiview application however I am not sure that you will be able to automate the retrieve of a report.
    Check chapter 19 of http://docs.oracle.com/cd/E12825_01/epm.111/sv_user.pdf
    Regards,
    Thanos

  • Smartview reports do not open in HFM v11.1.2.1 after upgrade from v9.3.1.

    Smartview reports when I attempt to open in HFM v11.1.2.1 (after upgrade from v9.3.1), points me to launch v9.3.1 workspace. Any advise pls... Thanks, Mark

    Mark,
    I still don't fully understand the issue. Smart View is not launched from Workspace -- it is instead run from within one of the Microsoft Office products (Excel, Word, PowerPoint, Outlook). Are you instead asking about Financial Reports? These are run from the Explore menu within Workspace. You can view these as html or PDF.
    A little more confusing is the fact that Smart View can run a Financial Report from within any of the Office products. In any case, when you use Smart View in 11.1.2.1 you could open a connection to the Workspace server (the connection in Smart View is defined in the Smart View options under Advanced > Shared Connections URL). Assuming you have provided a correct URL there, pointing to the 11.1.2.1 workspace server, you should see the available shared connections when you open a new conenction.
    I re-read your e-mail and wonder if you are confusing things a bit. If you log into Workspace, using Internet Explorer, each user has their own preferences as to what page launches by default upon login. I think you are saying that a usr logging into the 11.1.2.1 workspace somehow has a default page leading them back to the 9.x workspace? If so, check their preferences to examine the default document and it's URL. Once logged into Workspace, choose File > Preferences > General, to view the Startup page. You can make any changes here, but this is user-by-user.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Limit on maxRows for a smartview report

    One of the business unit extensively use SmartView to create Excel report. And they would be rather comfortable using excel for their reporting purpose. I would like to know if there is a best practice for a smartview report. Currently we have increased the "service.olap.dataQuery.grid.maxRows=50000" in the Essbase.properties file in Provider Service application server. I understand there are memory implications as the maxRows grow.
    Currently we have 16Gb ram for the server which host APS as well as Hyperion Planning. Java Heap size for APS min=1024 and max=2048 and same for Planning . The datasource which the business unit use is Planning.
    The user computer is 32bit Windows 7 with MS Office 2010
    What should be the limit of maxRows of a smartview excel report.
    thank you for looking into it.

    Thank you Jasmine for your reply.
    The interesting thing is this report has only 1700 rows. But the analyst wants to pull 3 years data instead of 1 year. And when he increased the year, he started reporting of this issue.
    After I increased the maxRows setting in essbase.properties in APS server, the issue was resolved.
    Sorry for my ignorance, as I am trying to understand what is happening in this case. Is maxRow setting for the number of rows on the excel sheet or it is for number of rows generated by data grid created by the HsGet function in the Excel report ?

  • Hi We got the below alert but its not reported in the alert.log

    The following SQL error occurred ORA-00054:resource busy had accquire with NOWAIT specified but its not reported in the alert log file
    Regards

    Hi,
    Error: ORA-00054
    Text:  resource busy and acquire with NOWAIT specified or timeout expired
    =========================================================================
    Cause:  Resource interested is busy or the timeout specified by DDL_LOCK_TIMEOUT has expired
    Action: Retry the command with a higher DDL_LOCK_TIMEOUT if desired
    Check this what could be in alert log file :Monitoring Errors and Alerts
    HTH

  • Looking for a solution to the consumption of the VM systems in Azure Portal that reports and notified by mail

    Hi
    I am looking for a solution to the consumption
    of the VM systems in Azure Portal that reports and notified me by mail.
    Please suggest.
    Thanks, Kk

    Hi Kk,
    what  notifications are you expecting? like Machine down etc.?
    you can make use of monitoring alerts and notifications in Azure, this will allow you to configure different 
    metric related to your virtual machines and other azure service you use.
    Specifically for VMs you can configure different metric for the VM host OS and you can also configure web end point status metric (will monitor situation like machine down or offline)
    here are two good reads
    Understanding Monitoring Alerts and Notifications in Azure
    Khalid's blog on
    Microsoft Azure Virtual Machine Monitoring with Azure Diagnostics Extension
    Hope this helps,
    Please mark as answered if it helped
    Vishal Narayan Saxena, MVP
    http://twitter.com/vishalishere
    http://www.ogleogle.com/vishal/

  • Problems trying to import and export alerts

    Hi everybody,
    We are trying out BAM 11 TP4 and we have BAM 10 already in production, in our try out, we are exporting everything like D.O., REPORTS AND ALERTS and importing to BAM 11 TP4, we were capable to import everything but the alerts it says that the user doesnt exists, so to see what was the problem I create the same alert in BAM 11 TP4 and try to export to compare the xml´s and then I got this message saying that the rule is not found, but it is there I created and tested the alert. So anybody can help me with that? Bellow is the icommand I m trying and the response from icommand.
    Thanks.
    D:\Fabricas\1-Fabrica_BAM\4-BAM_11g\1-Types\1-Export\5-Rule>icommand -cmd export -type Rule -name "1-Deletar dia anterior todos os dias as 5 pm" -file Deletar24_11g.xml
    ICOMMAND_RUN_DIR=C:\BAM11g_OC4J_HOME\bin\..
    JAVA_HOME=C:\jdevtp4\jdk
    "C:\jdevtp4\jdk\bin\java" -enableassertions -Xms128M -Xmx512M -Djava.util.logging.config.file=bin\utility.logging.properties -Doracle.bam.debug=false
    -Djavax.xml.parsers.DocumentBuilderFactory=oracle.xml.jaxp.JXDocumentBuilderFactory -Djavax.xml.transform.TransformerFactory=oracle.xml.jaxp.JXSAXT
    ransformerFactory -cp lib\java\internal\oracle-bam-icommand.jar;lib\java\internal\oracle-bam-middleware.jar;lib\java\internal\oracle-bam-adc.jar;lib\j
    ava\internal\oracle-bam-morpheus.jar;j2ee\home\lib\logging-utils.jar;jlib\dms.jar;lib\java\shared\org.jgroups\2.4.1\jgroups-core.jar;webservices\lib\c
    ommons-logging.jar;j2ee\home\lib\concurrent.jar;j2ee\home\jps-internal.jar;jlib\rds.jar;pcs\lib\pcsagent.jar;drm\ons.jar;lib\java\internal; oracle.bam
    .icommand.Application -cmd export -type Rule -name "1-Deletar dia anterior todos os dias as 5 pm" -file Deletar24_11g.xml -DEFAULTPATH "D:\Fabricas\1-
    Fabrica_BAM\4-BAM_11g\1-Types\1-Export\5-Rule;D:\"
    Oracle BAM Command Utility [Build 2616, BAM Repository Version 2013] Copyright ⌐ 2002, 2008, Oracle. All rights reserved.
    Exporting Rule "1-Deletar dia anterior todos os dias as 5 pm"...
    BAM-02514: There is no Rule named "1-Deletar dia anterior todos os dias as 5 pm".
    [ErrorSource="ImportExport", ErrorID="Export.Rule.NotFound"]

    I seem to be getting there now and have discovered the renaming presets on the right hand side of the import panel. It's actually all working rather well but I'd like to find out more about the various IPTC fields to see if there is more information I should be adding.

Maybe you are looking for