Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

Similar Messages

Bank details of the Vendor are not picked up from Vendor Master in APP Run

Hai SAP Gurus,
When the Automatic Payment Programme(F110) was run it is not giving bank details of the vendor in the payment file. These details are sent to bank in the file form. It should give account holder name in the payment file where as it is not giving.
Kindly help me at the early
Thanks in advance
Akash Narayan

Hi,
Good morning and greetings,
Please go through the following link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e7/65382ad2d211d29e430000e839cd96/frameset.htm
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

RTP's are not showing up from the forms

Case1:
========
I have a business rule which has seven RTP's. I have unchecked the Hidden Value for the BR in the Calculation Mgr.
I have included this rule in a Menu and executing it from the form.
Here it is not showing the pop -up for the RTP's but straight away taking the default values of the form combination and executing properly.
But I need the RTP to change the combination.
Case 2:
========
The Same Business rule is working fine when we do a launch form (Menu--> Tools---> Business Rules--> Launch). the RTPs are coming.
Case 3:
========
I also tried testing the RTPs by including it at "Run On Save", it is showing the RTP prompts properly.
But I need the Case 1 working
Please advise me, where I am missing for Case1.
Regards
Mahesh

Hi,
In the menu definition, for the business rule item, there will be a drop list called "Required Parameters". Modify the value there depending on what parameters you want to obtain from the form.
Thanks,
JM

Taxes in pricing procedure are not picked up in the simulation for invoice

Hello all
we want to post taxes in pricing procedure in purchase order. but in MIRO Enter Incoming Invoice the system is not picking the taxes as line items in simulation. please let me know any setting missed in this regard.
Thanks in advance
Ramaraju

Hi,
Did you selected the Tax code in MIRO, unless you select how the system will show in the simulation.
Check whether you have assigned the Tax procedure to your Country, did you created the Tax code for your country which you defined. If all the settings are ok then only you will get the Taxes in Simulation of MIRO.
One more thing r u getting any error while doing MIRO related to Taxes. Check & Confirm.
rgds
Chidanand

Deltas are not pick up by the data source

Hi,
From one weak onwards my data source is not pick any deltas today i found that the luw's are struck into LBWQ.I can see the luw's in lbwq .In rsa7 there is no luw'sie It shows 0.My data source 2lis_02_scl. The V3 job compleated success fully every day.
So how can i clear the LUW's to rsa7. Remember this is production .
This is very urgent please respond.
Thanks in advance.
Sharma.
Message was edited by: Amol Kulkarni

Hi
Here a few links on the topic..
/thread/101086 [original link is broken]
Luw in the delta queue.
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Regards..

Any script to cancel the PO which are not taken receipt from the back end?

Hi,
We need to cancel the PO Shipments which are not taken receipts to reverse the encumbrnace budegatory amount. is there any script i can use so that i can cancel all the PO's which are not taken receipts or we need to manually cancel the each shipment by navigating in to the PO summary window using the Tools > Control option.
Please let me know your views..ASAP
Note: We are using the 11.5.10.2 version with encumbrance budgetary funds checking for PO's.
Regards,
Kevin
Edited by: user10960960 on May 6, 2009 3:17 AM

There is no documented,proven and supported way of doing such thing using scripts. Best to do it from front end; use dataloader for large volumes, and data loader in forms playback mode for larger volumes.

My messages are not being deleted from the server

Hi,
Mail is not removing messages from the server. Every now and than I have to remove messages from my server manually. I went through all the settings ... it works as intended on 2 out of 3 machines ... am I missing something? I can use "delete now" in Mail preferences ... not a big deal, just a nuisance.
Thanks, Stephan

Are the Mail settings sticking between reboots on that one Mac?

Movies I purchase from wish list are not being removed from the wish list

I have a few movies that I bought on apple tv from my wishlist. Issue is with some movies that after I purchase, they still show on the wish list and I cant remove. Anyone know of a fix for this?

Nobody has a solution to this? Apple?!

Business Rule err The following value is not valid for the run time prompt.

Hyperion Planning v 9.3.3
I have created a new BR with 2 local variables (created at the time of the BR), Variables are set as run time prompts. They are created as "Member" (not Members). The BR basically does a calc dim on dense and Agg on Sparce other than the prompt on Entity and Version dimensions. The entity variable has a limit on level 0 of the dimension. The Version variable limits to the input (Submit and Sandboxes)
The BR is associated in Planning with an input web form. Entity and Version are in the page. Is set to Run on Save and Use members on form.
If the run time prompts Hide boxes are checked, an empty Prompt pops up with only a Submit button. Click the button and an error comes up: "The following value is not valid for the run time prompt it was entered for:. But it does not indicate what member - just ends in the :.
The BR will run sucessfully only if the Run-time prompt is not hidden - "Hide" in the BR is unchecked. So the syntax and logic of the BR is correct and security should not be an issue.
The client wants no prompt. In production we have similar situations in which the BR works with the Web Forms without a prompt.
What am I doing wrong - I have tried restarting the Planning service and the EAS service.

My preferred method of doing this is:
1. In business rule, do not hide the run-time prompts. This makes it easy to validate the business rule as you are building it. I only use Global Variables.
2. On the form, have business rule set to run on save, use members on data form and hide prompt.
Check that in the business rule, for the variables (Run-Time prompts), that they are all in use. If not, delete them from the business rule. Are all your variables global? Are some local and some global? This could be the issue.
Deanna

Run Time Prompt - showing alias instead of member name

We have a Capex Planning application that uses right-click menus to launch business rules with Run Time Prompts. We are using Planning 11.1.2.1. Even we the alias table set, when opening the RTP it pulls in the member name rather than alias.
There is an Oracle KB article (Show the Alias name in the Business Rule Run-Time Prompt [ID 857832.1]) that has this solution:
Take the following steps to add the alias name to the run-time prompt along with the member name.
1. Log in to planning web.
2. Navigated to File >> Preferences >> Application settings.
3. Select Show Alias in Member Selection and change the option from no to yes.
4. Save it.
But in 11.1.2.1, there is not option for "Show Alias in Member Selection" under Planning Preferences.
We have an SR open, but figured maybe someone else has run into this issue as well.
Does anyone know how to get the aliases to show on a Run Time Prompt rule in 11.1.2.1?
Thanks for your help!!

Deleting and rebuilding the dimension in the outline will enable you to build the members in the order you may desire if the file is in a given order.

Hide run-time prompt in composite data form in 11.1.2

Hi, I am using Planning 11.1.2, and the rule with run-time prompt I attached to a composite data from can't execute successfully when I selected "Hide Prompt" and "Use Members on data form". It says "An error occurred while attempting to run the following business rule on save". But if I set this rule to be run on save in a single data form, not a composite one, the rule could be run successfully. Is this a bug or does anyone know how to solve this? Thank you.
Regards,
Jerry

Hi, I had the same problem and I did a Service Request to Oracle. This is a bug. Unfortunatly, I do not think there is a solution to fix this problem.
The 11.1.2.1 version fixes this bug.
Virgile.

Pricing errors are not cleared after fixing the master data

Hi All,
Kindly go through the issue explained below.
Pricing is determined properly in transaction level(Oppt) when the master data is correct. cool.
System shows pricing error (Mandatory condition 0PR0 is missing, Pricing could not be determined) when price(condition record) is not maintained in product. This is also fine. Now the issue is, Pricing errors are not going away from Opportunity even after the master data(product) fixed with maintaining pricing.
Scenario : Opportunity is saved with pricing errors.
Analysis : Price or/and Sales area are not maintained in Product that is maintained in Oppt. That is why this error occurs. So, we have maintained the Sales area/Price(condition record) in product. Now master data is corrected.
Expected result: After maintaining the price/sales area in product, the errors should go off from the created Opportunities and pricing should be determined properly.
Actual result: When we create a new opportunity with the same product, pricing is determined. But the errors are not going away from the already created opportunity transactions.
Please let me know if this scenario is not clear to understand.
Please help with your inputs. Thank you for your time.
Regards,
Maddy

Hi Luis,
Thank you very much for your reply. Could you please help me where is the button 'Redermine Pricing' available? I have checked in Opportunity transaction but failed.
Regards,
Maddy

My deleted emails on iPhone 4s are not being deleted from server

I'm facing a problem with my iPhone 4s when deleting emails. Unfortunately, they are not being deleted from the server. I tried setting the account in pop and imap with settings to delete from server and trash ticked. Still they keep on appearing in Outlook which is a double work to do. Please advise.

I'm no expert by far, but have had issues with this before.
IMAP should allow your iPhone to remove messages from the server.
But have you made sure both the iPhone and Outlook are connecting via IMAP?
If your iPhone does remove the messages from the server, but your computer is using POP, then the computer may download the email before it is removed form the server by your iPhone.
This was my issue, that my computer had already downloaded the message, and POP does not check later if it is deleted.
If you delete a message from Outlook does it disappear on the iPhone?
Alternativly you may need to check the email server settings.
Who is your email provider?
They may be able to check if IMAP allows you to remove emails.

Run Time Prompts on Smartview

Hi
Wondering if anyone can help
When submitting data via opening a data form on smartview a prompt appears asking wether you would like to run the associated business rule. However when you run a business rule through planning a run time prompt appears (e.g which week would inflationary increases apply from) asking for additional information.
This prompt does not appear when running the associated rule through smartview is there any reason for this? Do I need to change a setting in smart view?
Thanks in advance for your help
Harman

HI Amol
Thanks for the reply
This prompt has been set and is still not prompting when running the business rule through smart view
Cheeers

Members on rows, can they be passed to run-time prompt in a business rule?

Hi!
I have a input form which has a business rule with properties "Run on Save" and "Use members on Form".
The business rule has run-time prompts (local variables) as follows (showing only the fix part of br...)
FIX ([V_Year],[V_Version],[V_Scenario],@LEVMBRS ("Offering", 0),[V_Entity],
[V_ICP], [V_Account])
calculation...
endfix
Now my accounts are on rows and I would like pass those account members to the [V_Account] variable through run time prompt. The [V_Account] ís a local variable with Type "Members" in Account dimension. I have also selected 0-level accounts as limits. Other dimension members from page/pov seem be passed successfully to run-time-prompts.
The run-time-prompt does not seem to be able to catch those account members on rows? Is it at all possible to pass members on dataform rows to run time prompts?
kind regards,
user637777

Hi!
Thanks John!
I just have live with that and find another way to restrict the calculation regarding those accounts.
kind regards,
user637777

Smartview webf run time prompts upon submit are not picking up from the POV

Similar Messages

Maybe you are looking for