Smooth scrolling horizontally rather than vertically

Hi is it possible to have smooth scrolling set from left to right rather than up and down, I've done some research into smooth scrolling and all i could find was articles showing smooth scrolling vertically. If this is not possible is there another way to set a horizontal scrolling long page?
Cheers
Clinton

Hi Thanks for your response, did you mean using the scrollable frames overlay? or in the builder set the Article behaviour to smooth scroll horizontally? I basically wanted to have a really long horizontal scroller made up of a series of images. I've tried the scrollable frames overlay however once you filck to the scrollable page it locks you on the page and the only way to get out of it is to select a different chapter in the bookmarks. I've also tried setting the behaviour to smooth scroll horizontally however it still snaps to the individual pages, id prefer if you could scroll between pages? (im previewing on the content viewer for ipad, not sure if this has anything to do with it?)

Similar Messages

Will Pavilion 400-434 work properly if placed horizontally rather than vertically?

Would like to place my Pavilion 400-434 on its side (so cd-drive faces up). Fits better on my computer shelf. Will it operate properly this way? Thank you!
This question was solved.
View Solution.

Hello @rmbnewengland,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to place your computer horizontally rather than vertically, and I would be happy to assist you in this matter!
You can place your desktop horizontally, so long as your system is not equipped with liquid cooling, and that there are no exhaust fans or intakes being blocked.
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How can I split edit css screen horizontally rather than vertically?

How can I split the edit css split-screen horizontally rather than vertically?

Unfortunately, Firefox doesn't have a built in "tile two windows side-by-side" command. There might be an add-on for that (in a quick search, I mostly found add-ons to tile two or more tabs rather than separate windows).
If that sounds completely off topic, can you describe the steps to get to what you're seeing?

How do you show multiple products horizontally rather than vertically with the module_productfeaturelist?

I am trying to have 3 to 4 featured products that share the same tag next to each other rather than stacked. Is there a way to do this by customizing the "List of Products by Tag" or is there another module I should be using?
What i am currently getting is this and I would like the side by side instead:
{module_productfeaturelist,featured,3,Weight,,true}

Your monitor would need an HDMI connection to hook it to AppleTV. AppleTV would need to be on the same network as the IMac, presumably wireless if you don't want to run cables.
You would then need to use Airplay Mirroring, and that requires reasonably modern Macs, see:
About AirPlay Mirroring in OS X
I don't know for certain but if you set up an automatic powerpoint slideshow you could probably export to an AppleTV compatible movie files, and then play that to AppleTV via iTunes as well, which ought to work with older Macs but video might need to be set to loop or repeat itself a lot.
If you want to use Airplay Mirroring buthave an old Mac, then AirParrot software has a demo, and some people find this ok.

TS3899 Suddenly, when I check my email, the screen does not rotate to the direction the phone is being held. How can I correct this? (Displays horizontally rather than vertically.)

My phone has suddenly started to display my emails horizontally and does not self-correct when I am holding it vertically. I have tried to correct this - to no avail. Does anybody know how to correct this?

Hi Sylver123,
Thanks for posting, please use the 'contact the mods' link in my forum profile to send in your details and we'll get this issue with your email looked into further. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Smooth Scrolling articles longer than 2000px?

I have an article I'd like to use smooth scrolling on and I'm familiar with the 2000 pixel limitation mentioned on the adobe forums. But I'm seeing lots of smooth scrolling articles in various DPS magazines with lengths much longer than 2000px..
What allows you to go longer than 2000 pixels?
-Bob

There is no 2000px limitation. That was an old guideline for scrollable frames.
Bob

Text continues moving horizontally rather than starting a new line in editable text field

I am trying to make a feed backbox for visitors on my website. I have made the editable text field and scroll bar and set all of my preferences, but when the typing reaches the border on the right of the text field it just continues to type further horizontaly. I can start a new line by pressing enter but I would like it to start a new line on its own when it reaches the boundary. Any help is appreciated.

assign your textfield's wordWrap property to true.

Can I make an e-brochure that scrolls horizontally from iPages.

Hello,
I am making an e-brochure in Apple iPages and will save to PDF.
The customer wants the brouchure to scroll to each page horizonally rather than vertically. Is this something I can do when saving to a PDF?
Any suggestiuons would be very welcome and many thanks for taking the time to answer and help me.
Lyndsay
www.lyndsaymoon.com

Simple answer would be "No, it's not possible" - but it depends on where you're viewing the document.
The scroll direction of a PDF isn't anything to do with the file (and it's not part of the PDF specification so cannot be changed on a per-document basis) but it's a decision of the displaying application. All desktop PDF apps scroll vertically and that cannot be changed; however many mobile apps scroll either way depending on the orientation of the screen.

How to make spry tab open or scroll horizontally.

I saw a bunch of spay panels that scrolls horizontally. But
dont know how this is achieved.
There is a slide effect in Dreamweaver Behavior panel but it
only goes up and down or vertically.
I'm trying to create a bunch of Spry Tab panels, basically I
hide the tabs using CSS display none property, then I add a "next"
and Prev button, this allows the user to browse the panels without
the tabs.
The problem is, I need the spray content area to open or
scroll horizontally instead of vertically or up and down.
Any ideas? Thanks
Patrick

Webethics wrote:
> I saw a bunch of spay panels that scrolls horizontally.
But dont know how this
> is achieved.
> There is a slide effect in Dreamweaver Behavior panel
but it only goes up and
> down or vertically.
>
> I'm trying to create a bunch of Spry Tab panels,
basically I hide the tabs
> using CSS display none property, then I add a "next" and
Prev button, this
> allows the user to browse the panels without the tabs.
>
> The problem is, I need the spray content area to open or
scroll horizontally
> instead of vertically or up and down.
>
> Any ideas? Thanks
Sounds like you really should be using the Spry Sliding
panels:
http://labs.adobe.com/technologies/spry/samples/slidingpanels/SlidingPanelsSample.html
You can make them go vertical, horizontal, or even a
combination. This widget isn't built into Dreamweaver, so you'll
need to add the appropriate markup manually. FOr more info check
out the Spry API docs:
http://labs.adobe.com/technologies/spry/articles/data_api/index.html
Select Sliding panels on the left, and then start off with
Overview.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

How to get vertical rather than horizontal plan?

Hi
Witha complex site layout plan it would be easier for me if child pages were shown in a vertical rather than a horizontal array.
The horizontal array makes for much scrolling across the screen and seems to use too much visual real estate.
How can this be changed?
Also is there no way to show notes alongside each page in the plan?
Thanks in advance
David

Hi
Usually staff answers are thoughtful and helpful - on this occasion I find the response to be rather simplistic and narrow minded.
1. There is no logical reason why a website could not be built irrespective of the way the planning mode controls it screen layout. After all that is what computers are really good at - separating logic from view. The only thing needed is a view modifier and I am really surprised that anyone would state with such confidence: "It can't hence, be changed in the plan mode"
2. When each sibling can be presented in a vertical rather than a horizontal plane it would facilitate visualisation, especially for complex sites,
3. No thought in the program design seems to have been given to the benefits which could arise from vertical presentation for printing purposes. We also need to be able to print siblings and the ability to be able to print out the site plan in vertical segments by sibling would be an invaluable planning tool.
4. No response has been made to the need to be able to attach notes (maybe using a "notes" layer?
Come - lets have a more thoughtful response. Like all software Muse is a work in progress and that, IMHO, is very true of Muse,. This program has a lot of potential but much needs to be done to approach a level of maturity that harmonises with other Adobe products. The absence of an inbuilt database management facilities is only one of many striking omissions which signal insufficient commitment and determination to fulfill that potential within a reasonable time frame.
david

Text Direction ... headers vertical rather than horizontal

I have a report with 20 columns...
So to be able to show all on 1 page, I want to be able to put headers vertical rather than horizontal..
Any Ideas how to do this?
Thanks
Dean

michaels2
I'm getting LPX-00601 when testing your code (10.2.0.4)
SQL> select * from test_xml;
NAME                        AGE   PASSPORT
John                         26 1231232143
Peter                        28 209381232
Lisa                         24 120431474
SQL> SELECT *
2    FROM XMLTABLE ('ROWSET/ROW/*' PASSING xmltype (CURSOR (SELECT * from test_xml)));
COLUMN_VALUE
<NAME>John</NAME>
<AGE>26</AGE>
<PASSPORT>1231232143</PASSPORT>
<NAME>Peter</NAME>
<AGE>28</AGE>
<PASSPORT>209381232</PASSPORT>
<NAME>Lisa</NAME>
<AGE>24</AGE>
<PASSPORT>120431474</PASSPORT>
SQL> SELECT *
2    FROM XMLTABLE ('ROWSET/ROW/*' PASSING xmltype (CURSOR (SELECT * from test_xml))
3 COLUMNS name VARCHAR2 (30) PATH 'node-name(.)',value VARCHAR2 (30) PATH '.');
COLUMNS name VARCHAR2 (30) PATH 'node-name(.)',value VARCHAR2 (30) PATH '.')
ERROR at line 3:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/*/node-name(.)'any clue?
Thanks

Positioning navigation bar vertical rather than horizontal on side on web

Is it possible and I think it is to place the webitem navigation_block bar on the side of the page rather than the default position on the top, without modifying the web template ( at runtime)
Even during the design time I am not able to make it vertical in wad.
Any help would be appreciated.
Thanks

I don;t see 0Analyser bar as vertical, it is horintal. Below is the code from 0ANALYZER and I located the navigation bar. my guess is that there is a paramname that can specify vertical alignment.Don;t know what that would be. None of the properties has that option..

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="GR1NavBlock"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
         <param name="DATA_PROVIDER" value="DP"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="WIDTH" value="200"/>
         <param name="SHOW_AXES_GROUPING" value="X"/>
         ITEM:            GR1NavBlock
</object>

Is there a way to make table entries vertical rather than horizontal?

I am wanting to make custom x-axis values which are names of sensors rather than numbers so i was going to just place a table to make the custom values. But i do not think Labview will allow vertical text like it is in the y-axis units. It only allows this for captions and labels. Does anyone know?

Here is a quick demo that is a bit more robust and picks-up on CC's suggestion.
It simply uses a picture control with a transparent background to hold the text labels.
It is in LV 8.0 but should be code-able back to 6.1.
This VI is suitable for use in creating an XControl.
Anyone game?
Ben
Message Edited by Ben on 09-17-2006 10:48 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Markers.vi ‏27 KB
Text Mrakers.JPG ‏144 KB

Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb. Ideally, I would like to show both images and text. I am actually using iWeb '09. I am not opposed to writing html code if necessary.
Thank you for your help!

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

Smooth scrolling on a horizontal page - how did Benjamin Moore do it?

Hi,
I'm trying to work out how Benjamin Moore did this (in their COLOURSTORIES Canadian Version). We're looking to do something similar (Different content on the horizontal and vertical formats), but can't work out how Benjamin Moore managed to get a scrolling horizontal page.
The screen shot is below:
We're looking, if possible, to have the horizontal and vertical versions of each article smooth scrolling.
Is this possible?
Also, is there a static URL for the features & bug fixes for the most recent release? I'm finding that even searching the forum thows up "This is fixed in the new release" without any reference to what the release is (v21, v22 etc). T'would be a help!
Cheers,
Simon.

Thanks Bob - my problem was not realising the "Scrolling direction" relates to the orientation of the orientation of the articles, and not as the name suggests the scrolling direction. Another fact stored in the noggin for future use

Smooth scrolling horizontally rather than vertically

Similar Messages

Maybe you are looking for