SMP 3.0: how to handle header values in the SOAP WS using Integration Gateway

Hi Experts,
We have a requirement from our current customer where they are providing us a SOAP WS.For one of the method we are passing “username” & “password” as input parameters and getting one security key (some unique number) in the response. We are able to do OData modeling for the same method. So far, it is fine.
For other method, we have to pass that ”security key” in header along with some other parameters in the body section. While doing the request mapping for this method, we don’t see any option for this key parameter apart from those parameters (in that body section).
We found one publicly available WSDL to reproduce the same scenario:
e.g http://api.geosvc.com/services/soap?wsdl . To access its one of the method/operation GetPlace,We have to pass APiKey and Cursor value in the header section.
<wsdl:message name="GetPlaceRq_Headers">
<wsdl:part name="ApiKey" element="tns:ApiKey"/>
<wsdl:part name="Cursor" element="tns:Cursor"/>
To get APiKey, we have to register first. http://www.geosvc.com/register , once its done, you will get one APiKey as below:
The same API key has to pass to access “GetPlace” method. So we tried it in SOAP UI to understand how exactly it should work:
As you can see below, for the method “GetPlace”, we are passing values as in:
Header Value
Cursor
blank
ApiKey
df7f8cc90e3345b4980cf6631f33a32d
Body
Country
US
Place
HOLLYWOOD,CA
Also got the response.
When we do modeling (more precisely request mapping as below) for the same method we don’t see any Header related parameters. We can see only parameters which are available in the BODY section.
We thought if we can get APIKey parameter in the body sections only, then it would be easy to map with. Right?
What do you suggest how we should handle this kind of scenarios?
CC: Mustafa Saglam, Jeff Gebo, Bjoern Woppmann
Regards,
JK

Unfortunately the public example is a slightly different use case. You have to register to get a static API key that is used in all calls. That is something you would hard code into the headers.
I think you are asking about a dynamic key they changes on each login. It would be great if we had a public one that upon login returned a unique session key to be used in subsequent calls so we could better test and model accordingly.
If you were using Agentry the answer would be yes you can do this.
--Bill

Similar Messages

Model of how APEX handles data (values)?

Reference {thread:id=2486655}
I'm trying to get a model of how APEX handles data (values). There are several places(?) that data (values) can exist. Or so it seems. I'm trying to understand how these work -- to put all the pieces together.
Question:
A) Where data can be?
1) In the database
2) In the session
3) Rendered -- and hence displayed on the screen, if a displayed value -- but not in the session
4) In perhaps(?) some working memory pool(?) but different from the page rendered values I see on the screen?
5) Other?
Why do I think this is relevant?
Question:
B) If there are rendered values and session values different from the rendered values, then when code executes, which of these values (rendered or session) is it executing against?
And maybe the answer is, "You don't understand what's going on." Yes, "Exactly!" Hence the question.
Best wishes,
Howard

Howard (DBA in Training) wrote:
I'm putting this together now. For example:
I set the value of a Page Item (say, :P2_DATA) to "BEFORE" in a Before Region process and change it to "AFTER" in an After Region Process. 'BEFORE' was displayed on the screen but 'AFTER' was in the session state. So I see that PL/SQL changes these values in the session state. But it doesn't "go back" to change the HTML after the region has been rendered -- hence we see BEFORE shown on the screen. (I'll have to think about what a Dynamic Action does.)
Also, if a page item has a default value, say 'DEFAULT' then that value doesn't get into the session state. At least, not with my current settings. Oh, that explains a lot of confusion!! I suppose there's a logical reason for this but who would expect default values to be differently from other PL/SQL operations on the item?
Questions:
1) So why does a default value not get put into the session state?Several reasons, among them:
*1. When/why is the value required?* Region items (and thus their source and default values) are rendered in region/item sequence order. The item's source/default value would therefore not be available in session state until it's rendering point. This is frequently later in page show processing than the value is actually required, such as the common use case of including a data value in the page or region title. Setting the value in a Before Header/Regions computation or process makes it available as required before the item is actually rendered.
*2. The rendered page might not be submitted.* Default values are typically set when a page will create a new row. Consider the situation where the user clicks a "Create" button and is presented with an order entry form containing several default values. They then decide they don't want to create a new order after all, and navigate away from the form page via some mechanism that uses a redirect rather than a submit (such as a default "Cancel" button). This means that no page submit processing is performed, and generally that no session state management is performed. If the default values were set in session state, the order entry page would contain the default values for the non-existent order despite the user never submitting it. This may have unwanted side-effects if these values are referenced elsewhere in the application, and therefore would require extra session state management to be built into the application.
*3. A rendered item might not be submitted with the page.* Per the HTML specification, the values of disabled controls unchecked checkboxes are not POSTed on page submit. Consider a situation where a checkbox item is set with several default values, but the application requires that the checkboxes be cleared and disabled by a dynamic action if the user chooses certain options from a select list. In this case, on page submission no values are submitted into session state for the checkbox item. If the defaults had been set in session state, then the application would be in an inconsistent state, with the user-selected option indicating that none of the checkboxes were checked, but with session state holding values showing that they were. This would require additional processing to ensure that the application's state was consistent before saving it to the database.1
2 & 3 are particularly significant in basic wizard-generated applications. Doing things in this way, the wizard-generated DML and navigation "just works", without the need for additional session state management.
2) Is there a Page Item setting that causes the default value to be saved to the session state?No. Hopefully the explanations above provide sufficient reason to show why this is genearlly not desirable. On the rare occasions when it is required, set the session state value using a computation or process.
1 There are other reasons—mainly security related—that make it good practice to perform such checks in more complex and internet-facing applications anyway.

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

How to show header value in each page same as Page field value.

Hi there
It would be very helpful if anyone could tell us how to set header value based on the page field.
To make it more clear.. i have a field in my Rtf (which is basically a group by) so in each page it'll differ.. My Header should reflect the same as field value.
what my understanding is header wont change for each page. but ,my requirement is something like i have to show the header which is same as one of my filed value..
for eg:
HEADER: ABC page-1
Field - ABC
HEADER:XYZ page-2
Field - XYZ
Regards - Vijay
Edited by: Vijay Santhanam on 23-Oct-2008 3:51 PM

Hi Haiye ,
The Pointer you gave would keep Header ABC through out all the pages in report right, actually i had tried this and got same header for all pages,
but what i need is my first page Header should be based on one of the field of Page 1, second pge Header again based on the same field, but the value may differ... (coz the page field is group by ).
Would appreciate your help on this issue!!
Regards - Vijay

How to bring the Header value to the row ?

Dear All,
I am a starter in learning SDK. have developed a form having 2 tables a header and a row detailed one.
Now i need to update a field in all the row with a header value when the header value is added. it should be like the SE name getting updated when the SE name is selected in header level in std doc.
how to arrive it?
kindly help me to achieve this.
Thanks,
Sam.

Dear Gordon,
May the customer enters a value to the header which they want it to be unique value for all the row detail.
If there exists more than 50 rows they cant enter it for each and every row, for in case if the value needed to be changed for a particular row or for particular few rows they will change it manually to that row alone.
I just want to achieve this scenario in my form.
Do you know how to bring in ?
As this is being a normal functionality in Std forms.
Thank you...

In BDC how you handled header data and item data

In BDC how you handled header data and item data

Raja,
Can you be more clear ?
Usually you load the header data one and then loop at the item data and then load the item data.
This example should help you.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
Ravi
Note - Please mark all the helpful answers

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to update field values in a database table using module pool prg?

hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidya

HI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
 v_kun_high like ZCUST_CALL_REC-kunnr,
 v_bud_low like ZCUST_CALL_REC-budat,
 v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
 JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
 MANDT LIKE ZCUST_CALL_REC-MANDT,
 kunnr like ZCUST_CALL_REC-kunnr,
 budat like ZCUST_CALL_REC-budat,
 code like ZCUST_CALL_REC-code,
 remarks like ZCUST_CALL_REC-remarks,
 end of itab.
*data:begin of Jtab occurs 0,
 MANDT LIKE ZCUST_CALL_REC-MANDT,
 kunnr like ZCUST_CALL_REC-kunnr,
 budat like ZCUST_CALL_REC-budat,
 code like ZCUST_CALL_REC-code,
 remarks like ZCUST_CALL_REC-remarks,
 end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
 text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
 perform append_CUSTOMER_code.
 PERFORM SELECT_DATA.
 call screen '9002'.
 perform update on commit.
WHEN 'DELETE'.
 perform append_CUSTOMER_code.
 PERFORM SELECT_DATA.
 call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
 text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
 text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
 text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
 text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
 WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
 SET SCREEN 0.
 LEAVE SCREEN.
 CLEAR sy-ucomm.
 WHEN 'UPDATE'.
 perform move_data.
 UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
 IF SY-SUBRC = 0.
 MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
 ELSE.
 MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
 ENDIF.
WHEN 'DELETE'.
 perform move_data.
 DELETE ZCUST_CALL_REC FROM TABLE ITAB.
 IF SY-SUBRC = 0.
 MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
 ELSE.
 MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
 ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
 text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
 text
module update_table output.
 move itab-MANDT to zcust_call_rec-MANDT.
 move itab-kunnr to zcust_call_rec-kunnr.
 move itab-budat to zcust_call_rec-budat.
 move itab-code to zcust_call_rec-code.
 move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
 table itab
 WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
 AND NOT v_kun_low IS INITIAL
 AND NOT v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_high
 IMPORTING
 OUTPUT = r_kunnr-high.
 r_kunnr-option = 'BT'.
 r_kunnr-sign = 'I'.
 append r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND NOT v_kun_low IS INITIAL
 AND v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 r_kunnr-SIGN = 'I'.
 r_kunnr-OPTION = 'EQ'.
 APPEND r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND v_kun_low IS INITIAL
 AND NOT v_kun_high IS INITIAL.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = v_kun_low
 IMPORTING
 OUTPUT = r_kunnr-low.
 r_kunnr-SIGN = 'I'.
 r_kunnr-OPTION = 'EQ'.
 APPEND r_kunnr.
 PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
 AND v_kun_low IS INITIAL
 AND v_kun_high IS INITIAL.
 IF SY-SUBRC = 0.
 MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
 CALL SCREEN '9000'.
 ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
 AND NOT v_BUD_low IS INITIAL
 AND NOT v_BUD_high IS INITIAL.
 r_budat-low = v_bud_low.
 r_budat-high = v_bud_high.
 r_budat-option = 'BT'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND NOT v_BUD_low IS INITIAL
 AND v_BUD_high IS INITIAL.
 r_budat-low = v_bud_low.
 r_budat-high = v_bud_high.
 r_budat-option = 'EQ'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND v_BUD_low IS INITIAL
 AND NOT v_BUD_high IS INITIAL.
 r_budat-HIGH = v_bud_HIGH.
 r_budat-option = 'EQ'.
 r_budat-sign = 'I'.
 append r_budat.
 ELSEIF R_BUDAT IS INITIAL
 AND v_BUD_low IS INITIAL
 AND v_BUD_high IS INITIAL.
 IF SY-SUBRC = 0.
 MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
 CALL SCREEN '9000'.
 r_budat-low = ''.
 r_budat-option = ''.
 r_budat-sign = ''.
 ENDIF.
 ENDIF.
ENDFORM.
*& Form update
 text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
 text
--> p1 text
<-- p2 text
form move_data .
 clear itab.
refresh itab.
 move-corresponding zcust_call_rec to itab.
 MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
 MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
 MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
 MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
 MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
 APPEND ITAB.
 delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya

How to handle an update of the same record from two different user in JSP

how to handle an update of the same record from two different user
how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

Usually, if two users try to update the same row at the same time, you want the first to commit to succeed, and when the second commits, they should fail with the error that the row was being concurrently updated. They you may want to show them the new row values and give them the opportunity to merge their values with the new row values...
How can you achieve this? Google optimistic locking.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to Read Variable Values in WAD 7.0 Using JavaScript

I found a how to: How to Read Variable Values in WAD 7.0 Using JavaScript on SDN.
I get a Javascript error:
bics.getElementsByTagName is not a function
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
Thats my script:
function currency()
var varnm = "SFS_CP_CURR"; // Name of the variable to be read
root = document.childNodes[0]; // <HTML>
body = root.getElementsByTagName("BODY")[0]; // <BODY>
xml = body.getElementsByTagName("XML")[0]; // <XML>
bics = xml.childNodes[0]; // <BICS_VIEW>
vars = bics.getElementsByTagName("VARIABLES")[0]; // <VARIABLES>
varl = vars.getElementsByTagName("VARIABLE"); // gives no. of variable in DP
for ( i = 0; i <= varl.length; i++ ) // Loop one by one
vari = vars.getElementsByTagName("VARIABLE");
varnam = vari.attributes[0].text; // get variable name
mem = vari.getElementsByTagName("MEMBER")[0];
varval = mem.attributes.getNamedItem("name").value; // read variable value
if (varnam == varnm) //check varname in loop needs to be read
if (varval == "ZMON") // check for value1 and fire command1
SFS_CP_M();
if (varval == "ZKON") // check for value2 and fire command2
SFS_CP_K();
break;
Where's the mistake?

I'm afraid I haven't made my question understood clearly.
What I am looking for is a method to get the value of variable inside excel (e.g. put it into a cell / range of a worksheet, so that we can reference it and use it as an input for planning function execution).
Please advice.
Thanks in advance,
Shady

How to handle multiple selection in the Spark List control with checkbox as itemrenderer?

Hi All,
I am using checkbox as an ItemRenderer in spark list.
I have a query.
how to handle multiple selection in the Spark List control with checkbox as itemrenderer?
how to retrieve the selected item label?
Thank you in advance.

Hi there, I'll tweak your code a little bit to something like this:
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
 layout="vertical">
 <mx:Script>
 <![CDATA[
 import mx.events.ListEvent;
 import mx.controls.CheckBox;
 [Bindable]
 private var mySelectedIndexes:ArrayCollection=new ArrayCollection();
 private function onChange(e:ListEvent):void
 if(CheckBox(e.itemRenderer).selected){
 mySelectedIndexes.addItem(e.rowIndex);
 }else{
 mySelectedIndexes.removeItemAt(mySelectedIndexes.getItemIndex(e.rowIndex));
 chkList.selectedIndices=mySelectedIndexes.toArray();
 ]]>
 </mx:Script>
<mx:ArrayCollection id="collection">
 <mx:Object label="Test A"/>
 <mx:Object label="Test B"/>
 <mx:Object label="Test C"/>
 <mx:Object label="Test D"/>
 <mx:Object label="Test E"/>
 <mx:Object label="Test F"/>
 <mx:Object label="Test G"/>
 </mx:ArrayCollection>
<mx:List id="chkList" dataProvider="{collection}" itemRenderer="mx.controls.CheckBox" itemClick="onChange(event);" allowMultipleSelection="true"/>
</mx:Application>

How to handle multiple request in the servlet

how to handle multiple request in the servlet...
Example:
java forum...
i'm login in the java forum at this time 1000 members make login in this....how happended in servlet?
if we use thread how to implement in servlet ?

Serlets are already threaded. The application container instantiates the servlet, then uses this instance in a new thread for every use.
This is the reason that you should use (almost) no instance variables in a Servlet, but rather that (almost) everything should be local to the method.

SMP 3.0: how to handle header values in the SOAP WS using Integration Gateway

Similar Messages

Maybe you are looking for