SMS error ... The person is not currently online. Help!
I am able to send SMS messages from my iChat to my mobile and to my friend's mobile. And he is able to reply. All good.
However, when he tries to send SMS messages from his iChat to my mobile or his own mobile, he gets an error of "The person is not currently online."
What is causing this??
Well, it seems like the problem is specific to his computer then if he cannot send messages using iChat to a mobile phone, whereas you can, and I can (I just tested it).
One thing to check on his end is by going into the iChat preferences and making sure that he is not blocking anyone and has either his settings set to "Allow Everyone" or "Block Specific People" (in which his phone number cannot be listed in the latter option). This is all found under the "Accounts" tab in the preferences of iChat.
That's my guess at least. Otherwise, there shouldn't be any reason he cannot send messages from his computer to a mobile phone unless there's something specific and quirky about his setup.
-Ryan
Similar Messages
-
Error: the object is not currently contained in a document
When I do a save or switch to other pages, I get the following error:
"Translate error: Error: the object is not currently contained in a document"
The web page I have open then doesn't render correctly in the window - although it looks fine in a browser. I already tried deleting the cache file and even the entire personal configuration file. How do I fix this? I am using Dreamweaver CS6, by the way.I've had a look at your medium.html page in a couple of browsers, as well as in the W3C validator.
I suspect Dreamweaver is having a problem with the external JavaScript that's loaded on line 20. It's coming from a remote server, and is likely to take some time to load. There also seems to be a problem with the "Begin Widget Config" comment on line 21.
I noticed that Source Code in both Firefox and Chrome display the Begin and End comments in a different colour from other HTML comments. Also the W3C validator complains about the opening angle bracket of the comment on line 21. When I copied the code into Dreamweaver and removed the template markup, I noticed that Dreamweaver also failed to display the comments in grey. But when I deleted the HTML comment tags and reapplied them, they turned grey.
It sounds like a long shot, but it looks as though there is something unusual about the characters in the comments on lines 21 and 42. Open the main template, delete those comments, and add them again (or leave them out - they're not necessary).
If editing the comments doesn't fix the problem, I suggest that you try deselecting the option to display external files (View > Display External Files toggles the option on and off). Alternatively, comment out the reference to the script on searchschoolsnetwork.com while you're working with the files locally. -
HELP! InDesign CC got an error: The property is not applicable in the current state." number 30615
HELP! Was working perfectly now it is giving me this error and doesn't seem to be going past the printing option. Code is below.
main.scpt
set posixIdPath to "/Applications/Adobe InDesign CC/Adobe InDesign CC.app"
do shell script "/Users/cdapice/Desktop/cryptoquip/getquip.sh"
delay 8
tell application posixIdPath
activate
end tell
delay 8
set scripttoRun to ":Users:cdapice:Desktop:cryptoquip:Script.jsx" as alias
tell application "Adobe InDesign CC"
do script scripttoRun language javascript
end tell
delay 5
Adobe InDesign CC got an error: The property is not applicable in the current state." number 30615
Script.jsx
var myDocument = app.open(File("/Users/cdapice/Desktop/cryptoquip/NewCryptoquip.indt"), true);
//var myDocument = app.activeDocument;
var myPage = myDocument.pages.item(0);
var myTextFrame = myPage.textFrames.add();
//Place a text file in the text frame.
//Parameters for TextFrame.place():
//File as File object,
//[ShowingOptions as Boolean = False]
//You'll have to fill in your own file path.
myTextFrame.place(File("/Users/cdapice/Desktop/cryptoquip/quips.txt"));
//var myTextFrame = app.selection[0];
myTextFrame.parentStory.pointSize = 10;
var brkStory = myTextFrame.parentStory.contents;
var myPIs = myDocument.pageItems;
var destTextFrame = myPIs[6];
destTextFrame.parentStory.contents = brkStory;
firstChange();
myTextFrame.remove();
app.select(destTextFrame);
splitStory();
for (i = 0; i < myPIs.length; i++) {
if (myPIs[i].appliedObjectStyle.name == "puzzleBox") {
var newBoxStyle = myPIs[i].appliedObjectStyle;
secondChange(myPIs[i]);
myPIs[i].applyObjectStyle(newBoxStyle,true);
if(myPIs[i].appliedObjectStyle.name == "otherBox"){
var newBoxStyle = myPIs[i].appliedObjectStyle;
myPIs[i].applyObjectStyle(newBoxStyle,true);
Date.prototype.getMonthFormatted = function() {
var month = this.getMonth() + 1;
var formMonth = month < 10 ? '0' + month : month; // ('' + month) for string result
return formMonth.toString();
Date.prototype.getDayFormatted = function() {
var day = this.getDate();
var formDay = day < 10 ? '0' + day : day; // ('' + day) for string result
return formDay.toString();
var newdate = new Date();
var laterdate = new Date();
var dayofweek = newdate.getDay();
var offsetdays = 0;
switch(dayofweek) {
case 2:
offsetdays = 6;
break;
case 3:
offsetdays = 5;
break;
case 4:
offsetdays = 4;
break;
case 5:
offsetdays = 3;
break;
app.epsExportPreferences.appliedFlattenerPreset.convertAllStrokesToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.convertAllTextToOutlines = true;
app.epsExportPreferences.appliedFlattenerPreset.rasterVectorBalance = 100;
//app.activeDocument.exportFile(ExportFormat.epsType, newFile, false);
for (i = 1; i < 7; i++) {
var curPage = i + "";
var x = i + (offsetdays - 1);
laterdate.setMonth(newdate.getMonth());
laterdate.setDate(newdate.getDate());
//alert(newdate);
//alert(x);
//alert(laterdate);
laterdate.setDate(newdate.getDate() + x);
//alert(laterdate);
var nameDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted() + ".eps"
//alert(nameDate);
app.epsExportPreferences.pageRange = curPage;
var curFile = new File("/Users/cdapice/Desktop/cryptoquip/" + nameDate);
app.activeDocument.exportFile(ExportFormat.epsType, curFile, false);
var endDate = laterdate.getMonthFormatted() + laterdate.getDayFormatted();
var firstDate = new Date();
firstDate.setDate(newdate.getDate() + offsetdays);
var startDate = firstDate.getMonthFormatted() + firstDate.getDayFormatted();
var idFile = "cryptoquip_" + startDate + "_" + endDate + ".indd";
app.activeDocument.save(new File("/Users/cdapice/Desktop/cryptoquip/" + idFile));
with (app.activeDocument.printPreferences){
printer = "Advertising - Creative - Color Xerox";
copies = 1;
pageRange = "1-6";
paperSize = "US Letter";
paperHeight = "11 in";
paperWidth = "8.5 in";
printPageOrientation = PrintPageOrientation.landscape;
pagePosition = PagePositions.centered;
scaleHeight = 100;
scaleWidth = 100;
scaleMode = ScaleModes.scaleWidthHeight;
scaleProportional = true;
pageInformationMarks = true;
colorOutput = ColorOutputModes.COMPOSITE_CMYK;
app.activeDocument.print(false);
for(myCounter = app.documents.length; myCounter > 0; myCounter--){
app.documents.item(myCounter-1).close(SaveOptions.no);
function firstChange() {
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findChangeTextOptions.caseSensitive = false;
app.findTextPreferences.findWhat = "^t";
app.changeTextPreferences.changeTo = "";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "^p^p";
app.changeTextPreferences.changeTo = "^p";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "^p";
app.changeTextPreferences.changeTo = "^R";
myDocument.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
function secondChange(curFrame) {
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findChangeTextOptions.caseSensitive = false;
app.findTextPreferences.findWhat = " ";
app.changeTextPreferences.changeTo = "|";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = " ";
app.changeTextPreferences.changeTo = "";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
app.findTextPreferences.findWhat = "|";
app.changeTextPreferences.changeTo = " ";
curFrame.changeText();
app.findTextPreferences = NothingEnum.NOTHING;
app.changeTextPreferences = NothingEnum.NOTHING;
function splitStory(){
//Make certain that user interaction (display of dialogs, etc.) is turned on.
app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
if(app.documents.length != 0){
if(app.selection.length != 0){
//Get the first item in the selection.
var mySelection = app.selection[0];
//Process the selection. If text or a text frame is
//selected, do something; otherwise, do nothing.
switch(mySelection.constructor.name){
case "Text":
case "InsertionPoint":
case "Character":
case "Word":
case "Line":
case "TextStyleRange":
case "Paragraph":
case "TextColumn":
case "TextFrame":
//If the text frame is the only text frame in the story, do nothing.
if(mySelection.parentStory.textContainers.length > 1){
//Splitting the story is a two-step process: first, duplicate
//the text frames, second, delete the original text frames.
mySplitStory(mySelection.parentStory);
myRemoveFrames(mySelection.parentStory);
else{
alert("Please select a story containing more than one text frame and try again.");
break;
default:
alert("Please select some text or a text frame and try again.");
else{
alert("Please select some text or a text frame and try again.");
else{
alert("Please open a document and try again.");
function mySplitStory(myStory){
var myTextFrame;
//Duplicate each text frame in the story.
for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
myTextFrame = myStory.textContainers[myCounter];
myTextFrame.duplicate();
function myRemoveFrames(myStory){
//Remove each text frame in the story. Iterate backwards to avoid invalid references.
for(var myCounter = myStory.textContainers.length-1; myCounter >= 0; myCounter --){
myStory.textContainers[myCounter].remove();Hotfixes are special, out-of-band patches created to fix specific problems, so they are never published to Windows Update. Often the hotfix gets incorporated into a released patch that is published on Windows Update. If this hotfix was incorporated
into a released patch, and you applied that patch to your system, the hotfix would see that its files are older than the latest files on the system and would give you this message. Because the hotfix is not for general distribution, there is rarely documentation
saying that it has been superceded.
Generally there is a file list with a hotfix/patch that gives you the version number of the affected files. You can go through those files to see that you have the latest files. The problem is finding the actual patch that updated those files.
Without going through lots of patches, it is hard to find which patch made the hotfix obsolete.
.:|:.:|:. tim -
HI Guru's
We are sourcing Employee records from upstream system and the Effective_start_date for particular record of Employee is getting changed, consider a below scenario.
EXISTING RECORD.
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,31-MAY-2001, EMP
123, 01-JUN-2001 ,31-DEC-4712, EMP
MODIFIED DRECORD
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,14-MAY-2001, EMP
123, 15-MAY-2001 ,31-DEC-4712, EMP
So when i am able to change the effective_start_date for 2nd record from 01-JUN-2001 to 15-MAY-2001 using an API "hr_person_api.update_person" with p_datetrack_update_mode as 'UPDATE_OVERRIDE'..
but after this when i am trying to terminate the employee using an API "hr_ex_employee_api.actual_termination_emp" for below scenario, i am getting the following error: "The person must exist as an employee at the time specified by Date Start".
For Termination:
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,14-MAY-2001, EMP
123, 15-MAY-2001 ,09-JUL-2001, EMP
123, 10-JUL-2001 ,31-DEC-4712, EX_EMP ----> Not able to process erroing
Please help me in resolving this issue..
Regards,
MushtaqHi,
Just wondering if this is an ATG related question.
Thanks,
Gopinath Ramasamy -
Biller Direct Error "We regret the service is not currently available"
Hi,
We have installed Biller Direct software (604 SP10) on our Java server (701 SP8) and it is connected to R/3 backend system (702 SP5). After Biller Direct software installation, we ran the following steps
1. Login to biller direct url
2. Leave blank in all fields (Customer No, Name and City) then click Find Customer
3. It lists few customers list, then when we click any of description for CustomerNo it displayed the following error.
"We regret the service is not currently available. Please try again later."
In the default traces we have seen the following error details:
#1.#1E99367F6302001B00000000000DF0D20004B38BAD09A298#1323312391758#com.sap.fin.webbase.framework.RequestProcessor#sap.com/fscm~bd#com.sap.fin.webbase.framework.RequestProcessor.processRequest#USER1#10588##n/a##775189f4214611e193e400000053dbc6#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###No screen-name mapped! path= ;result=#2#/startEBPP#customerSearch#
Could some one please advise what could be issue? Please let me know how to fix the issue, if you already went through the above error.
Thanks in advance.
Regads
SriHi Sri
Please logoff the system and restart the system again and then check.Also check what is the CRM package that you are using.Check wheather CRM 4.0 60.2.3 package is there or not.
The following tables should be configured,or you will get this sort of errors.This configuration should be done in the backend by FI
-> BCONTCD
-> BCONTT
-> BCONTA
-> TFKEBP
Regards
Srinaath -
[290x] MSI Gaming App error "The platform does not support this application."
Using the latest AMD Omega drivers, I am unable to launch the Gaming App and am presented with this error - "The platform does not support this application."
I have tried downloading Gaming APP 3.0.0.16.zip from another post on the topic but I am receiving the same error. The only other thing I've seen as a 'solution' is to install the drivers from the MSI support page for my card - however this is version 14.4 and is over 3 months old, I don't really think that's a viable solution.
Any ideas?
Thanks!Quote from: JLio01 on 07-January-15, 11:55:18
Is your vga driver 14.12? Any other settings changed?
Do you have any other msi or vga software installed?
Can you do a fresh re-install OS and what's the language of your OS?
Yes, Catalyst Omega. No other software or hardware changes.
Yes MSI Afterburner. Have tried uninstalling and installing gaming app, have also not had it running when trying to launch MSI Gaming app. No joy there.
No I can't, that's not really an option for a piece of software like this which worked before but doesn't since the latest AMD driver updates.
Quote from: JLio01 on 07-January-15, 16:07:38
Since your motherboard is not the supported gaming series mobos, there might be something detected wrong with your card. The error message shown if neither motherboard nor vga is supported in Gaming App. I suggest use AMD Catalyst Clean Uninstall Utility to totally uninstall the current driver:
http://www.techspot.com/drivers/driver/file/information/16748/
and re-install the latest driver 14.12. I have no problem using Gaming App 3.0.0.16 with my R9 290X, hope you too.
I have never seen anything stating that you need a supported gaming series motherboard to use the MSI Gaming App - maybe for other features if it has any, but the gaming app I used when I got my card was a little box with a few options for the GPU on it. Tried uninstalling and reinstalling the driver already unfortunately, using both AMD CCUU and a second attempt with DDU. No change at all, the exact same error message.
But as I've said, the fact that there is more than one person reporting this and older drivers make the gaming app work, it's definitely a software ended problem on certain configurations. I have installed driver 14.4 now and can once again use the gaming app, just as someone with a different card and different motherboard has stated in another thread. xxhttps://forum-en.msi.com/index.php?topic=251885.0xx this solution however is not really acceptable. -
when a new personal site is created on the sharepoint online 2013， then the administrator of this personal site will be himself. we can add another person to the "site collection administrators", then this person have full control of this personal
site.
but my request is : add this personal to the personal site when the personal site is creating, but not after the personal site has created ?
Is anybody know how to do that?Hi,
According to your post, my understanding is that you want to add a special user to the "site collection administrators" of the personal site on sharepoint online when the personal site is creating.
Per my knowledge,
there is no out of the box way to accomplish this with SharePoint.
This is a forum which is supported for SharePoint On-Premise.
Regarding SharePoint Online, for quick and accurate answers to your questions, it is recommended that you initial a new thread in Office 365 forum.
Office 365 forum
http://community.office365.com/en-us/forums/default.aspx
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Getting error The user could not be registered at this time due to an internal error in R11
We created new Organization (that had alpha numeric value e.g. 7777A) using Customer Online to be used in iStore i11 version.
The user account and password was also created for the organization. When we tried to login to istore the first time the registration screen (jtftmplh.jsp) was displayed. After filling the needed information and submitting we get the error:
"The user could not be registered at this time due to an internal error Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error."
But if we created new Organization with numbers only e.g. 7777 we don't have the issue. Yet we already have large number of organization with alpha numeric and they work fine. (believe they were pragmatically loaded).
The profiles "HZ: Generate Party Number" and "HZ: Generate Party Site Number" are set to Yes.
==> Here is the error in the page source:
Message: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
Stack:
oracle.apps.jtf.base.resources.FrameworkException: The user could not be registered at this time due to an internal error
Please contact the system administrator if this problem persists.
Note to System Administrators: View source for more information about this error.
at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:406)
at _oa__html._jtftmplh._jspService(_jtftmplh.java:3961)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
at _oa__html._jtftmplh._jspService(_jtftmplh.java:3870)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
at _oa__html._jtftmplh._jspService(_jtftmplh.java:2342)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
at _oa__html._ibeCRgpBusinessCreate._jspService(_ibeCRgpBusinessCreate.java:1467)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:680)
Caused by: oracle.apps.jtf.base.resources.FrameworkException: IBE_ERR_UM_REG_USER
at oracle.apps.ibe.um.RegisterBusiness.handle(RegisterBusiness.java:1157)
at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:379)
... 37 more
Caused by: oracle.apps.jtf.base.resources.FrameworkException
at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
... 39 more
The error message is not helpful and not clear of the error. How can we register users with alpha-numeric value (if that is the issue?).
Thanks for your assistance.Been like this for a couple of days. Is this something that happens from time to time?
-
Error: the database could not be exclusively locked to perform the operation in sql server 2008 ?
I am trying to rename the database but i am getting below exception while doing it-->
Error: the database could not be exclusively locked to perform the operation.(Microsoft Sql Server,Error 5030)
Thanks.as mentioned earlier by both these users just wait for all the connections to go and then try- it will succed
or else if it is dev\Uat environment & you can kill the conenctions - make the changes (use this as last option)
i was just wondering if you are connected to the same DB? If yes change your context to master(means connect to master DB ) and then issue this command.
Sarabpreet Singh Anand
Blog ,
Personal website
This posting is provided , "AS IS" with no warranties, and confers no rights.
Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Error :The catalog selected is currently unavailable:Please try again later
Hi Experts,
I am getting an error "The catalog selected is currently unavailable:Please try again later" when select a sold to party. I am not getting this every time. Only sometimes i am getting this error. When i delete the temperorary files from internet explorer sometimes this error is not coming. What might be the reason for this error??
Thanks a lot in Advance.
Regards,
Lakshman.Hi
Please let us know whether the error is thrown for all the sold to parties or for some.
This error is caused because the catalog cache is flushed out . A quick solution would be to replicate the product catalog from the CRM system to TREX system. -
Error: "The workflow could not delete the list item"
Have set up 2 lists: Events and EventsArchive. They have all the same fields. I have created a workflow in SPD using an impersonation step (I have Full control of the site/site collection). Workflow is essentially this:
If Curent Item:Expired
equals
Yes
Copy item in Current Item to
EventsArchive
then Delete item in
Current Item.
The item is copying over to the EventsArchive list just fine, but the "delete" part is not happening. Instead, I get the following error:
The workflow could not delete the list item. Make sure the list exists and the user has permissions to delete items in the list.
The list obviously exists (or I wouldn't be able to copy an item from it), and I have as much permissions as anyone can have, so I'm not sure where else to turn with this.
Thanks in advance for your help!Hi,
To test the issue, I create a simple workflow without using Impersonation step:
It works.
Could you please create new lists to avoid custom settings and test the issue again?
Similar thread:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa94026-4487-4e4c-a5b4-12a79d6ee6a2/workflow-delete-item-not-working?forum=sharepointcustomizationprevious
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Hi, in my MOSS 2007 farm getting below Search errors frequently:
1.“EventID: 0x00002736 (10038) - Query machine 'server xyz' has been taken out of rotation due to this error: The object is not initialized. 0x8004180b. It will be retried in 15 seconds”
2. Retry of query machine 'server abc' has failed with error: The content index is corrupt.
In this Farm, one Application server works as an index server and two WFE servers work as Query servers.
So currently resolving the issue resetting the crawl content and running full crawl. I also changed the Index file location frequently on both the WFE servers but frequently error is coming.
Please tell me what to do.Hi Prakash,
It seems like your existing index partition is corrupted, please remove initial index partition and create new.
Please refer below article, this will give you some idea to troubleshot this issue further:
http://daxdilip.blogspot.in/2012/06/troubleshooting-sharepoint-search.html
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP) -
Crystal report error (The table '' could not be found)
Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie -
Error :"The provider is not compatible with the version of Oracle client"
Hi guys!
I'm facing this problem:
When my .Net application tries to access the DB, I get this error message above.
The application is into the same machine of DB and the operational system is Windows Server Enterprise 64 bits.
I'm comparing to another machine that has the same scenario but runs in Windows Vista 64 bits. This problem doesn't happen and I can normally access the DB.
The both database versions are 10g Release 2 (10.2) and all components from Oracle Database Components 10.2.0.2.21 are installed as the containing bellow:
-Oracle Data Provider for .NET 1.x 10.2.0.2.20
-Oracle Data Provider for .NET 2.0 10.2.0.2.20
-Oracle Developer Tools for Visual Studio .NET 2003 10.2.0.2.20
-Oracle Developer Tools for Visual Studio 2005 10.2.0.2.20
-Oracle Provider for OLE DB 10.2.0.2.20
-Oracle Objects for OLE 10.2.0.2.20
-Oracle Services For Microsoft Transaction Server 10.2.0.1.0
-Oracle Net 10.2.0.1.0
-Oracle Universal Installer 10.2.0.2.0
Oracle.DataAcces.DLL is 2.102.2.20 and it is reference in my .Net app (that is published and located into IIS).
These are the Oracle assemblies installes in 'C:\Windows\Assembly':
Windows Vista Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Oracle.Management.Omo 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.VsDevTools 2.102.2.20 Neutral 89b483f429c47342 x86
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Windows Server Machine:
ASSEMBLY NAME VERSION CULTURE PUBLIC KEY TOKEN PROCESS ARCHITECTURE
Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Oracle.DataAccess 2.102.2.20 Neutral 89b483f429c47342 x86
Oracle.DataAccess.resources 10.2.0.100 pt-BR 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHT 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 zh-CHS 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 ko 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 jp 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 it 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 fr 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 es 89b483f429c47342
Oracle.DataAccess.resources 10.2.0.100 de 89b483f429c47342
Policy.10.1.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.10.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 10.2.0.100 Neutral 89b483f429c47342
Policy.9.2.Oracle.DataAccess 1.102.2.20 Neutral 89b483f429c47342
What should I check and do to solve this problems?
Thanks for help,
AndersonHi,
Often the error "The provider is not compatible with the version of Oracle client" is raised when the unmanaged dll OraOpsX.dll can't be found, can't be loaded, or is the wrong version. For version 10.2.0.x of ODP.NET and .NET Framework 2.x the file should be called "OraOps10w.dll" and should be found in the %ORACLE_HOME%\bin directory.
Since the ODAC pieces are installed on the same host as the database, are they in a separate Oracle Home or the same Oracle Home as the database software? If there are multiple Oracle Home directories, which one is in the system path first?
I would start with verifying the version of OraOps10w.dll and the system path on the server. You might also confirm that the Oracle Home directory (and everything under it) has the following permissions for Authenticated Users:
- Read & Execute
- List folder contents
- Read
Regards,
Mark -
Mysite Error - The site does not contain a default keywords termstore
I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx
Maybe you are looking for
-
On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first d
-
Why does paintbrush not work on images opened from Bridge?
This problem may be due to another cause but the most common occurance is when an image is opened from Bridge so I've posted it here. Here are the details. I have had tons of problems with CS4 on my desktop PC but seem to have most of them resolved
-
Re: Flash 10.0.32.18 Installs OK, But I am Still Prompted to Install Flash!
I have XP Pro media version with IE6 and I have the same problem. The web sites Marlboro.com and dishnetwork tell me I don't have flashplayer installed. I use the uninstall, install, and reboot, but always the same results in the above websites. Anot
-
Hi, I am creating a new method METHOD2 in an existing class. I am using an internal table which is populated in other method METHOD1. But when I tried to call the METHOD2 in main program,it is saying that METHOD2 is not defined.while I have activated
-
Archive Windows System logs (event viewer)
Hi Guys, Good Day. I want to export daily all System event logs and generate report to a .CSV or .TXT file and then copy the report file to, the following location \\Archivenasprd01\Appspr01\ddmmyyyy: or is it possible to schedule this job ever 1 or