SMS from applications in 2.3.3 for Xperia X10

The SMS is working ok as long as there is no application that will try to send automatically a SMS. I did install a different SMS client App but I guess the applications are using differnt Android API's so it is probably why this is still failing. Please do not sugest me GoSMS or similar Client SMS replacement apps. I tried and they work the same way as the default SMS client from the 2.3.3 firmware.
The APP I am using is sending the first SMS message but then nothing else. Also the SMS is working properly if manually sending them before that first automatic message. As soon as an automatic message is sent all other manual attempts to send SMS messages are failing. The messages are remaining in "sending" state until the phone will be rebooted. Following the reboot all manually SMS messages that were in "sending" status are being sent but not the message that the application has "hanged" the SMS process on.
The same APP was working before the upgrade. I have tried some similar aplications that I have tested before deciding on this one and that I have used on 2.1 and all of them are behaving the same after the 2.3.3 update.
Hope this clears the problem definition!
Does anyone know if there is a bug in the version 2.3.3 that is related to this issue? Any idea if there is a 2.3.4 or grater version for Xperia X10 that is coming out soon? I voluntier for HotFix ;-)
Thanks.

As correctly pointed out by the Moderator, I did go through the pain of repair and factory restore a few times, just thinking that one is not enough ;-)...
To add to the information, hopefully helping to troubleshoot this problem, one of the applications that is triggering it is "Lost Phone Finder - DroidRing". Actually that is why I did multiple repair, just thinking that it might be a conflict with a different app I did installed it right after but with no success.
Since I posted this thread, I did do a test with installing a different SIM in the phone, no change in behavior. It is hard for me to believe that I am the only one having this problem.
I have added the application causing me grief in the hope that someone out there will be willing to take the chance and test this with a similar config.
Just another additional information, I did install the Handcent SMS. In a different post it was something that solved someone's issue with group messages behaving in a similar way. Thought for my issue it did nothing, the phone behaved exactly the same afterwards.
Thank you guys for your suggestions to date.

Similar Messages

  • Transfering SMS from Iphone 4 to a PC for free?

    Hello,
    Is there a way to transfer Iphone 4 SMS messages from the phone to a PC computer for free. While maintaining the dates of the messages and possibly contact name.
    screen shots are not an options (alot of messages)
    I've looked for a few programs and it's really not an option to pay for a program I will use once.

    G3gator, I hate to repeat myself, but...
    The first rule of the forums is not to raise old threads unless there some super-critical piece of information that will save the free world as we know it today.
    Second, always post a new thread in reference to this.
    Third, google for answers.

  • Installation error in software update for xperia x10 (android 1.6 to 2.1)

    i have installed pc companion 2.0 and followed all listed steps but the listed  error message is the same ..i want to update my current and. OS to 2.1 firmware

    Hi,
    I noticed your post hasn't been answered. Have you now managed to update your X10 to Android 2.1 successfully?
    If not, have you tried using the Update Service program instead of PC Companion?

  • App Inventor driver for Xperia x10 mini

    I want to get started with the App Inventor but I cannot get passed
    the installation stage. I installed the App Inventor on my computer
    and now I need to install a driver on my mobile but cannot find it
    anywhere.
    Anyone has an experience with that?

    I Have That Same Problem, But With My Mini Pro. What Do I Do!? I'm Confused!
    I've Already Downloaded And Installed The Setup Software, But I Don't Know How To Actually "run" The Program.
    Im Guessing I Need To Find A Driver? But Where? And How? Will It Run The Program?

  • Is there a manner which transmits SMS or MMS from application?

    Is there a manner which transmits SMS or MMS from application?

    It is possible to transmit SMS from application?

  • Uploading xml file from application server

    HI everybody guys having promblem reading xml file from application server.Here is the solution. the sample program is below.
    TYPE-POOLS: ixml. "iXML Library Types
    *TABLES : rbkp.
           TYPE DECLERATIION
    TYPES: BEGIN OF type_tabpo,
           ebeln  TYPE ekko-ebeln,         "PO document number
           ebelp TYPE ekpo-ebelp,          "PO line item
           END OF type_tabpo.
    TYPES: BEGIN OF type_ekbe,
           belnr TYPE rbkp-belnr,          "Invoice document
           gjahr TYPE rbkp-gjahr,          "fiscal year
           END OF type_ekbe.
    TYPES: BEGIN OF type_invoice,
           belnr TYPE rbkp-belnr,          "PO document number
           gjahr TYPE rbkp-gjahr,          "Fiscal Year
           rbstat TYPE rbkp-rbstat,        "invoice status
           END OF type_invoice.
    TYPES: BEGIN OF t_xml_line,            "Structure for holding XML data
            data(256) TYPE x,
            END OF t_xml_line.
         INTERNAL TABLE DECLERATIION
    DATA: gi_tabpo TYPE STANDARD TABLE OF type_tabpo,
          gi_ekbe TYPE STANDARD TABLE OF type_ekbe,
          gi_invoice TYPE STANDARD TABLE OF type_invoice,
          gi_bapiret2 TYPE STANDARD TABLE OF bapiret2.
    DATA: l_ixml TYPE REF TO if_ixml,
          l_streamfactory TYPE REF TO if_ixml_stream_factory.
         l_parser TYPE REF TO if_ixml_parser,
         l_istream TYPE REF TO swif_ixml_istream,
         l_document TYPE REF TO if_ixml_document,
         l_node TYPE REF TO if_ixml_node,
         l_xmldata TYPE string.
    *DATA: l_elem TYPE REF TO if_ixml_element,
         l_root_node TYPE REF TO if_ixml_node,
         l_next_node TYPE REF TO if_ixml_node,
         l_name TYPE string,
         l_iterator TYPE REF TO if_ixml_node_iterator.
    DATA: l_xml_table TYPE TABLE OF t_xml_line, " XML Table of the structure
          l_xml_line TYPE t_xml_line, " Record of structure t_xml_line
          l_xml_table_size TYPE i. " XML table size
    DATA: l_filename TYPE string.
          WORK AREA DECLARATION
    DATA: gw_tabpo TYPE type_tabpo,
          gw_ekbe TYPE type_ekbe,
          gw_invoice TYPE type_invoice,
          gw_bapiret2 TYPE bapiret2.
       BEGIN OF SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    PARAMETERS: p_file TYPE pathintern LOWER CASE DEFAULT '/usr/sap/tmp/'.
    Validation of XML file: Only DTD included in XML document is supported
    SELECTION-SCREEN END OF BLOCK blk1.
      INTIALISATION.
    INITIALIZATION.
      SELECTION SCREEN VALIDATION
    AT SELECTION-SCREEN.
    To validate p_file is not initial
      PERFORM sub_validate_file.
    PERFORM sub_validate_path.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Request for filename for xml file from the application server
      PERFORM sub_get_filename_appl USING  p_file.
      START OF SELECTION SCREEN
    START-OF-SELECTION.
      PERFORM sub_fetch_po_details.
      PERFORM sub_get_invoice.
      PERFORM sub_rel_invoice.
      END OF SELECTION SCREEN
    END-OF-SELECTION.
    *&      Form  sub_validate_file
         To Validate the file
    FORM sub_validate_file .
      IF p_file IS INITIAL.
        MESSAGE e000.           "specify the file path
      ENDIF.
    ENDFORM.                    " sub_validate_file
    *&      Form  sub_get_filename_appl
    form sub_get_filename_appl  USING  l_fname TYPE any.
    DATA:  l_fname TYPE filename-fileintern.        " File name
    *GET THE FILENAME FROM THE APPLICATION SERVER
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = l_fname
          filemask         = '*'
        IMPORTING
          serverfile       = l_fname
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " sub_get_filename_appl
    *&      Form  sub_fetch_po_details
         To fetch the PO details from the application server
         Format of file is XML
    FORM sub_fetch_po_details .
          TYPE DECLERATIION
      l_ixml = cl_ixml=>create( ).
    Creating a stream factory
      l_streamfactory = l_ixml->create_stream_factory( ).
      PERFORM get_xml_table.
      LOOP AT gi_tabpo INTO gw_tabpo.
        WRITE:/ gw_tabpo.
      ENDLOOP.
    ENDFORM.     " sub_fetch_po_details
    *&      Form  get_xml_table
          Read from the xml file
    FORM get_xml_table .
    Local variable declarations
      DATA: l_len TYPE i,
      l_len2 TYPE i,
      l_tab TYPE tsfixml,
      l_content TYPE string,
      l_str1 TYPE string,
      c_conv TYPE REF TO cl_abap_conv_in_ce,
      l_itab TYPE TABLE OF string.
      l_filename = p_file.
    code to upload data from application server
      OPEN DATASET l_filename FOR INPUT IN BINARY MODE.
      IF sy-subrc <> 0.
        WRITE:/ 'invalid file path'.
      ENDIF.
      DO.
        READ DATASET l_filename INTO l_xml_line.
        IF sy-subrc EQ 0.
          APPEND l_xml_line TO l_xml_table.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET l_filename.
    code to find the table size
      DESCRIBE TABLE l_xml_table.
      l_xml_table_size = ( sy-tleng ) * ( sy-tfill ).
    *code to convert hexadecimal to XML
      LOOP AT l_xml_table INTO l_xml_line.
        c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data
    replacement
        = space ).
        c_conv->read( IMPORTING data = l_content len = l_len ).
        CONCATENATE l_str1 l_content INTO l_str1.
      ENDLOOP.
      l_str1 = l_str1+0(l_xml_table_size).
      SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
      LOOP AT l_itab INTO l_str1.
        REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
        l_str1 WITH space.
      ENDLOOP.
      CALL TRANSFORMATION ('ID')    " code to put in internal table
      SOURCE XML l_str1
      RESULT tab = gi_tabpo[].
    ENDFORM. " get_xml_table

    Hi Raja,
    I tried the same. But it not populating the table and giving an error message in the return table "line   1 col   1-unexpected symbol; expected '<', '</', entity reference, charac".
    I can't find any ' ; ' in the XML file. What could be the possible reason of error?

  • Reading File from Application Server using Read Dataset

    Hi,
    i am trying to read excel file from Application Server and has multiple records in that based on structure below. but when i execute its giving me error message.here is the code, can sumone suggest me on this please ??
    FORM f_data_upload .
      DATA:
         l_filename TYPE string,   "file name
         l_wa_string TYPE string.  "file record
        l_filename = p_inp_as. "File path from Application Server
        OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        DO.
          IF sy-subrc <> 0.
            EXIT.
          ENDIF.
    Read the data from the file in Application server.
          READ DATASET l_filename INTO l_wa_string.
          IF sy-subrc = 0.
            SPLIT l_wa_string AT cl_abap_char_utilities=>horizontal_tab
                  INTO w_data-tcode
                       w_data-matnr
                       w_data-mtart
                       w_data-werks
                       w_data-vkorg
                       w_data-vtweg
                       w_data-lgort
                       w_data-meins
                       w_data-maktx
                       w_data-spart
                       w_data-kosch
                       w_data-mstae
                       w_data-brgew
                       w_data-ntgew
                       w_data-groes
                       w_data-matkl
                       w_data-prdha
                       w_data-mstde
                       w_data-mtpos_mara
                       w_data-gewei
                       w_data-spart
                       w_data-mstav
                       w_data-mstdv
                       w_data-dwerk
                       w_data-taxkm
                       w_data-versg
                       w_data-kondm
                       w_data-ktgrm
                       w_data-mtpos
                       w_data-mtvfp
                       w_data-tragr
                       w_data-ladgr
                       w_data-herkl
                       w_data-ekgrp
                       w_data-webaz
                       w_data-dismm
                       w_data-beskz
                       w_data-prctr
                       w_data-bklas
                       w_data-bwtty
                       w_data-vprsv
                       w_data-verpr
                   IN CHARACTER MODE.
            APPEND w_data TO i_data.
            CLEAR w_data.
           ENDIF.
        ENDDO.
        CLOSE DATASET l_filename.
    Error Message while executing
    What happened?
        At the conversion of a text from codepage '4110' to codepage '4102':
        - a character was found that cannot be displayed in one of the two
        codepages;
        - or it was detected that this conversion is not supported
        The running ABAP program 'ZHDI_LOMM_VEHI_MAT_MASS_CREATE' had to be terminated
         as the conversion
        would have produced incorrect data.
        The number of characters that could not be displayed (and therefore not
        be converted), is 449. If this number is 0, the second error case, as
        mentioned above, has occurred.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
         caught in
        procedure "F_DATA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Characters are always displayed in only a certain codepage. Many
        codepages only define a limited set of characters. If a text from a
        codepage should be converted into another codepage, and if this text
        contains characters that are not defined in one of the two codepages, a
        conversion error occurs.
        Moreover, a conversion error can occur if one of the needed codepages
        '4110' or '4102' is not known to the system.
        If the conversion error occurred at read or write of  screen, the file
        name was '/usr/sap/interfaces/conversion/pioneer/ddm/data/test_data1.xls'.
         (further information about the file: "X 549
         24064rw-rw----200812232135082008122307293120081223072931")
    Please help me
    Thank You

    Woah ... perfect guru
    but data looks like all junk characters ? its filling with special characters, hashes # and other characters but not with Excel data.. any idea ??
    Temesh
    Edited by: New2Sap Abap on Dec 24, 2008 6:42 AM

  • Transferring SMS from Nokia 9300i to E7-00

    Hello,
    I have a major problem which is preventing me form leaving my Nokia 9300 behind. I depend on SMS a lot and I have my SMS archived on the phone in several folders (I don't keep them in the inbox of course). I was very happy to see that we can restore the "nbu" file directly to E7. However, I was surprised to see that Nokia PC Suite doesn't backup all of the SMS folders. It only backs up the original system folders (inbox, outbox, drafts, sent).
    I've tried copying or moving my SMS from the folders I've created for them back into inbox but the system doesn't allow that. I've tried copying them into drafts and it can be done but I lose all the crucial data (when and who).
    I need to know if there's a solution to backup those folders and move them to E7.
    Sincerely,
    Moumen

    If 9300i works ok with Ovi suite, bit of a work arround and laborious, but if you sync messages with Ovi (after transferring them all to back to inbox) you can then connect E7 and drag and drop them from Ovi suite to the E7 !
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • How to send sms from gsm modem(AT commands) to j2me application(not inbox)

    hi
    i want to send sms from gsm modem to a j2me application, for this to happen i have to send sms to a specific port in which j2me application is running.when i m trying to send sms from modem it doesnt go to application it goes to inbox.
    is it related to udh settings if yes then how do i set port no in settings?if no what are the other ways.

    Hi Vignesh,
    Might be you can call ActiveX or DLL objects of the software installed for modem from LabVIEW, if it is unblocked.
    Have a  look on the link > http://zone.ni.com/devzone/cda/tut/p/id/2983
    CLA 2014
    CCVID 2014

  • SMS from J2SE Application

    Hello I'm trying to do the following thing: I wanna send SMS from a J2SE Application to an emulated device...but it doesn't work! The J2SE Application (which is a regular application) is not able to get a valid connection from the Connector, I mean the object MessageConnection returned by the Connector is null, even if the url is valid. Is there someone who has some experience with this stuff? I guess the solution is to correctly plug-in the J2SE application into the emulator context, but I have no idea of how I can do that...Thanks in advance for the help, Alex

    Friends
    Do any one have solution for above mentioned problem. I am also struck with this and searching for answer for days
    Pravin

  • How to send sms from oracle application to cell phone

    Hi all
    please send me in how to send sms from oracle application to cell phone. Is there any way to solve this task. if so please suggest me.

    Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=SMS&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to send SMS from JSP application.

    Hi,
    I have created a web application using JSP for our Office internal use. I want to include the folowing option in our app.
    1) How to send SMS from the application to mobile.
    2) I don't want to use third party service (ex: SimpleWire). as the app is for internal purpose only.
    It will be helpful, if I get the complete procedure to implement it, as this is my first application.
    Thanks & Regards
    suresh.

    I am having problem with smslib. smslib is an enhanced version of jsmengine, I have compiled the program, there is no error but when I run it , the following error is found. Can you help? my email is [email protected]
    Exception in thread "main" java.lang.NoClassDefFoundError: CIncomingMessage (wrong name: org/smslib/CIn
    comingMessage)
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)

  • T-code for delete file from application server

    Hi all!
    Please, has any t-code for delete file from application server? For upload exist CG3Z, for download has CG3Y. And for delete? Has anyone?
    I need to delete file from application server in QA system and i don't want to create a program for this because i will need to transport a request from DEV to QA.

    I don't have contact with basis team.
    The FM EPS_DELETE_FILE support directory name with max 60 char. My dir. has more than that. I need a transaction for this.
    Anybody know if this transaction exist?

  • Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

    Hi
    We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
    'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
    I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
    i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
    i am stumped, any advice would be great!

    Hi
    Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261645</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
      </EventData>
    </Event>
    AND
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2038
    Task Category: Exchange VSS Writer
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="32772">2038</EventID>
        <Level>3</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261646</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          21/01/2013 10:16:30
    Event ID:      2034
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeRepl" />
        <EventID Qualifiers="49156">2034</EventID>
        <Level>2</Level>
        <Task>2</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261649</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
        <Data>FFFFFFFC</Data>
      </EventData>
    </Event>
    and
    Log Name:      Application
    Source:        SPP
    Date:          21/01/2013 10:16:30
    Event ID:      16389
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      NERDS-DC01.nerds.local
    Description:
    Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying...  More info: .
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="SPP" />
        <EventID Qualifiers="0">16389</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
        <EventRecordID>261650</EventRecordID>
        <Channel>Application</Channel>
        <Computer>NERDS-DC01.nerds.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Microsoft Exchange Writer</Data>
        <Data>
        </Data>
        <Data>The writer experienced a transient error.  If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
        <Data>
        </Data>
        <Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
      </EventData>
    </Event>

  • Logical path for getting a Flat file from application server

    Hi All,
    We have loaded some .csv files to application server, what is the logical path we have to mention in the infopackage scheduler screen? please guide me how to give the path for getting a flat file from application server.
    Thanks,
    Sairam.

    Hi Sairam,
    I hope you know which location you have saved in the Application server.
    Now if you go to the Infopackage and click on the "External Data" tab, there you will see Radio Buttons for
    1) Client Workstation
    2) Application Server
    Choose the second radio button, then in the Field "Name of the File" you will be able to use the F4 help and browse AL11 transaction through this option. You can then choose the File.
    Hope this helps
    Regards,
    Praveen.

Maybe you are looking for