SMS not allowing pictures not made by iPhone in latest update

So I have the 3GS phone on AT&T with iOS4. I take pictures with the camera on the phone as well as another camera (high end) that I carry around.
I was sending pictures today to a friend of mine and the picture that I took from the iPhone sent without error. When I tried to send a picture that I had taken from my camera (that are saved on my phone)... it wouldn't send.
I noticed that when I click on the "existing photos" section and I choose a picture I took from my camera, it comes up fuzzy. Then when I confirm, it takes me back to the text message screen and does nothing.
If I click on the "existing photos" section and choose a picture that I took from the iPhone, it comes up clear and allows me to send (as always).
I've sent this camera picture many times before so I know it's not the picture. The only thing different has been the update.
Anyone else have or ... can duplicate this problem? I'm confused!!!
Thanks...

Maybe the pictures taken by your high end camera are too big? I'm still on 3.1.3, but I had this issue many times before with pictures taken by the same iPhone 3gs!!! Some pictures were too big in size.
The limit for picture messaging is 300kb.
I noticed that when a picture has lots of details, colors etc. iOS can't handle it (when selecting it from your albums, this is the time when iOS is converting/compressing the original picture to under 300kb[MMS-ready]) and the final size of the picture you are about to send is above 300kb. I actually investigated it few weeks ago.
So the issue you are experiencing is down to the original size and content of your "high end" pictures.
What size are these pictures? ...actually.. I believe you're syncing your "high end" pics via itunes? If so, all those pics are already "shrank" on-the-fly whilst syncing. Still, iOS fails sometimes when converting pics to under 300kb :>
Correct me if I'm wrong.
Post couple of pics in original size and I'll try to send it via SMS/MMS on my ip

Similar Messages

  • This accessory not made for iphone

    "this accessory not made for iphone would you like to turn on airplane mode" message keeps coming up. I select no, I have to unplug and plug back in the apple earbuds, yes the ones that came with the iphone and it will work for a song or 2. Suspecting the earbuds perhaps have a short in them ( yes the right speaker is pretty distorted at volume) I tried to play my songs with no head set plugged in, and I still get the "this accessory not made for iphone would you like to turn on airplane mode" message. This phone is pretty much useless as an ipod, and frankly thats the only reason I bought it. My phone is approximately 3 months old. Is there a fix, is my phone a lemon or am I gonna have to send it out and be out of luck for awhile? Like most people Im very dependent on my phone and music. Thank you

    done211,
    The message you are describing occurs when either a device is connected to the dock connector port that is not designed to work with the iPhone, there is debris such as lint in the dock connector, or the dock connector itself is physically damaged.
    Connecting something to the headphone port will not cause this message to be displayed.
    Hope this helps,
    Nathan C.

  • Rain + Accessory is not made for iPhone = Need advice!

    Just got caught in a really heavy rain shower and now my iPhone is intermittently showing the Accessory is not made for iPhone message. But I don't have anything plugged into it!
    I've turned it off, taken the cover off and placed it somewhere dry (it didn't actually get wet at all, just a bit damp).
    Any experiences of similar things out there & suggestions?

    I had the EXACT same thing happen to me. It's so annoying and I don't know what to do! I hear there is a way to fix it, but your phone needs to be jailbroken.. which mine is not. My bottom water sensor is totally red, so I know taking it to the apple store isn't going to do anything for me. If your sensors aren't red or pink... you should take it in!

  • Accessory is not made for iphone

    For Christmas my daughter received a ipod speaker player. One of those speaker systems that you plug you ipod into and you can hear it... external speaker style for your bedroom. Well I plugged my iphone into it to play my music and got an error message.
    THIS ACCESSORY NOT MADE FOR IPHONE SWITCH TO AIRPLANE MODE.
    now I get this message even thou I'm not plugged into that box anymore. How can I get this message to stop showing up.

    I have an original iphone with all update sw/fw, etc. I have never had any problems with my phone. Mine just started giving me this random message as well. It began after plugging my phone into a third party wall charger that was "made for iphone". Now I get that accessory message constantly throughout the day.
    Does anyone know how to resolve this yet? Will it help to wipe the phone and reload everything?
    Here is what I've tried so far:
    -plugged the phone into the original iphone dock and left it there overnight. Restarted the phone in the dock as well.
    -plugged the phone in a car charger that works perfectly in the past with no issues.
    -restarted the phone numerous times.
    -Plugged the phone into computer and synced it several times.
    -'blew' out the connector with one of the computer dust removal aerosol cans.
    Thanks for any info. This is driving me nuts.

  • Suddenly my LR 5 will not recognize my iPhone, which I updated to OS 8. I need my pictures NOW - help!

    Suddenly my LR 5 will not recognize my iPhone, which I updated to OS 8. I need my pictures NOW - help!

    I just drove 4 hours to the nearest Apple store, the same on that replaced the battery 3 months ago. They tried to fix it, but could not and then admitted they probably did something when they replaced the battery. So with the manger's approval they replaced my phone at no charge to me, even thought I bought the phone back in 2012.

  • Accessory not made for iPhone! It in the iPhone dock!?

    My iPhone has a problem when it is put on its dock and ONLY when its put in the dock it occassionaly comes up with the "this accessory is not made for iPhone..." message.
    This has happened 3 times over a period of 7 days- it does not occur everytime the phone is in the dock and it has never occurred any other time.
    I have managed to get it to happen twice tonight but half pushing the phone into the dock BUT I can't get it to happen everytime - it came up about 2 times in 100 attempts over 4 hours to see if I could replicate it.
    I have not restored it as it is so random I am not sure that restoring it will even fix it - although I will if it gets worse.
    I have another iPhone dock I am trying and it has not come up in that dock but again it may not appear for hours or days as its so random!
    There are no other problems with the phone. I don't know what to do!
    Any suggestions? Thanks.

    I was in the shower when I received a call. I turned off the shower, blotted my ear, and tried to keep the phone dry. I got to my headset (corded one that comes with it), and plugged it in to be safe. All of a sudden I start getting the message you're talking about. I also had had the ringer turned off the day before. I have no idea what caused it, or if any of that was something above that started the issue. I wasn't getting the clicking sound when I turned off the keyboard, and that stupid message kept popping up.
    I tried turning off the phone and resetting it, I unplugged and replugged the headphones, and blew the phone's dock connector, earpiece, and headphone jack. I turned ringer mode on and off with the switch. None of this seemed to work.
    Then I plugged the phone in DIRECTLY to the computer, just with the cord and no dock. Be-deep. The sound I loved to hear. Sleeping the phone with the top right button now clicked again, and MOST importantly, I haven't gotten the message in the last 10 minutes!!!!!
    I'd love to know if any of those situations I listed above was something you had done before this occurred. And I'd love to know if it works.

  • I updated my iPhone with latest update.  I was asked if I wanted to communicate with iCloud for all my devices.  I chose yes.  I than am told I need to check my email to verify my account and there is not an email for apple to verify

    I updated both my iPad and iPhone with latest update.  Love it!  However, I wanted to use the find iPhone using iCloud feature.  From the beginning of update it kept prompting me to verify my account when I wanted to use iCloud ???  Apple kept telling me to check my email to verify my account and there is not an email from them.   And I'm not talking about verifying by my alternate email which I was successful at.

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • TS1363 i could not activate my iphone 3G after updating to ios 6.0.1

    i could not activate my iphone 3G after updating to ios 6.0.1

    Generally this is a sign that the iPhone had previously been
    hacked/modified/jailbroken and the update relocked it to the
    original wireless carrier. If this is the case, only that wireless
    carrier can unlock your iPhone. You must contact them to see
    if they offer unlocking and if you qualify.
    If the iPhone was advertised as unlocked and you are still within
    the return period, start a claim with eBay to get your money back.
    What wireless carrier did you use before this problem?
    Does the app Cydia appear on your iPhone?
    What does it say when you look at Settings=>General=>
    About=>Carrier?

  • I see my apps in itunes but not in my iphone, if just update ios, someone can help me?

    I see my apps in itunes but not in my iphone, if just update ios, someone can help me?

    When you go onto iTunes and you have plugged the device in it comes up at the top saying 'summary' 'info' etc if you press onto 'apps' does it show that they are ticked where it says sync apps? if not then tick it, sync it and hopefully that will help?
    hope it does

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • IPhone keeps saying that this application is not made for Iphone

    My phone won't be plugged into anything and it says that the application was not made for an Iphone. It also wont sync with my computer. My computer doesnt even know its there
    any ideas?

    Hi GaterFarms,
    Thanks for using Apple Support Communities.  This article has some things you can try if iTunes repeatedly prompts you to authorize your Apple ID and may help your iPhone syncing trouble:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Cheers,
    - Ari

  • Notes made on iphone

    Why are notes made on my iphone automatically e-mailed to me? I got 40+ e-mails, stunning.
    How can I sync / copy-paste my notes from my iphone to my Mac in .pages format?
    Or is it better to sync from notes (iphone) to notes (MacBookPro) first, and copy paste to Pages? Then, how to sync from notes to notes?
    Also, I have heard I should be saving the notes on my icloud account. I have created one, but how could you save your notes on the iCloud? And what's the use of my icloud email address??
    Thanks in advance.

    When I set up my icloud account, (Like Eric said, setting>iCloud) it gives me an email account called [myname]@icloud.com
    But what I found in my gmail account were these notes, every time I clicked on 'done' it sends me an email to my gmail account. Can I stop it from doing that?

  • Where do you find backups of notes made on iphone

    I appreciate that on the info pane of the iphone sync window one can tick the criteria to Sync notes in the other subsection of the pane.How does one locate the backed up notes made?

    Mail>Reminders>Notes
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I could not activate my iphone 3gs after update to 5.1.1

    hi i could not activate my iphone 3gs 32gb after update to 5.1.1  i m try 25 time  but not activate please can u help me thanks

    Very unlikely anyone here can help you as you've provided absolutely no information for us to even remotely try and help.

  • Why are fonts not showing correctly in the latest update?

    Our blog uses the leetpress theme. You an view a sample here:
    http://themeforest.net/item/leetpress-a-gaming-wordpress-theme/232177
    But with the latest Firefox update, the fonts are changed to my default font setting, which is Times New Roman. I tried Chrome and it doesn't have problems.
    I already checked for possible solutions for my problem.
    Please don't give me an answer where I have to check the "Allow pages to use their own font" because it is checked since I started using Firefox. I'm not sure if it's because of the latest update. Hardware acceleration is also checked.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/

Maybe you are looking for

  • Error in PR, RFQ & PO

    Hi, When I create either PR or RFQ or PO and save it, I am getting an error "Express document Update was terminated received from author SAPUSER" and the PR or RFQ or PO is not getting created. The complete details of the error is: Update was termina

  • AS2 seeburger monitor

    Hi All, I have a requirement to create alert in AS2 seeburger adpter.Once the message fail in Seeburger Workbench , need to send some alert mail to the appropriate recipient. Could it be possible to monitor messages of seeburger in XI (SXMB_MONI or R

  • I just recently had a new hardrive installed and now i cant transfer my data

    I just recently had a new harddrive installed and I cant seem to start it up properly

  • Calling SQL statement from a script problem

    Hello, I have a script e.g query.sh: #!/bin/sh sqlplus -s ${ORACLE_USER} << HIC set heading off set newpage none SELECT 'ALTER TABLE '||'TEST_TABLE'||' ADD PARTITION '||' P'|| TO_CHAR(TRUNC(sysdate+7), 'IYYY')||'W'|| TO_CHAR(TRUNC(sysdate+7), 'IW')||

  • Delete transaction data

    In order to delete master data from 0employee, i will have to delete transaction data from some of the related info cubes and dso's.We have very huge data in these info providers. Can some one please suggest how to proceed with this and what are the