SMTP Configuration after Installation

Hi,
I have skipped SMTP Host information during installation and now I'm puzzled-up how to config after successful installation. Can anyone guide me how to achieve this task?
Also, sending email with configured SMTP host is quiet east from Oracle Reports 10g but how to achieve this from Oracle Forms 10g/PL-SQL that Query Result can be emailed with the help of configured SMTP host
Thanks in advance ... Urgency of this task is HIGH
Regards,
ZJ

There is a file in the directory configToolCommands (at least under Linux). Try to execute this script.
However you are performing a basic installation, and this should work (even under Windows :-)
Have you checked all the prerequisites?
cu
Andreas

Similar Messages

Configuration after installation

Hi , Is there a way to perform a product configuration equals that install does ? I was installing the oracle infrastructure and my machine turned down , so I don´t want to reinstall again. I was in the step that the installation was configuring the products.
Thanks.

Hi
Yes it is possible to do so but only if you have done installation 100 times and you know all the steps performed by the installer. Installation log has all the entries of the step along with command performed by the installer, if you check and run this command individually it would work. I would on the serious note would never go for this kind of installation.
But then also it would be better if we uninstall the half installation done by the installer and run the new installation.
Regards

What are the steps involved in configuring Oracle EBSR12 after installation

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.
Thanks,
SR

What are the steps involved in configuring Oracle EBS R12 after installation is complete?
We have an empty oracle EBS R12 installed and up and running. We do not have anything configured.
Please direct me to the documents that can be followed to do initial steps for the application functionality to work.All Oracle EBS Docs 11i/R12 can be found at:
Oracle Applications Documentation
http://www.oracle.com/technetwork/documentation/applications-167706.html
Thanks,
Hussein

Error while running Enterprise Manager 11gR1 after installation

Dear All,
I have just installed Oracle 11gR1 on centOS 5 operating system. During installation I checked the option to create sample schema. During installation the installer displayed some error message regarding Enterprise Manager and told that you can run the script manually after installation is complete with the script location i.e /<oracle_home>/bin/emca
After installtion i have run the script BUT now when i try to start dbconsole it fails.
When i run emctl status agent it says agent is not running.
Following is from emagent.trc file
2009-03-01 20:44:26 Thread-3047507648 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 20:44:26 Thread-3047507648 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 20:44:26 Thread-3047507648 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 20:44:26 Thread-3047507648 WARN main: clear collection state due to OMS_version difference
2009-03-01 20:44:26 Thread-3047507648 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 20:44:26 Thread-3047507648 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 20:44:26 Thread-3047507648 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 21:37:17 Thread-3086870208 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 21:37:17 Thread-3086870208 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 21:37:17 Thread-3086870208 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 21:37:17 Thread-3086870208 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 21:37:17 Thread-3086870208 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 21:37:17 Thread-3086870208 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 21:42:09 Thread-3086194368 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 21:42:09 Thread-3086194368 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 21:42:09 Thread-3086194368 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 21:42:09 Thread-3086194368 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 21:42:09 Thread-3086194368 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 21:42:09 Thread-3086194368 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-03-01 22:14:44 Thread-3086542528 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /Oracle/app/oracle/product/11.1.0/db_1/78.129.247.153_bssglbuk/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2009-03-01 22:14:44 Thread-3086542528 WARN http: snmehl_connect: connect failed to (78.129.247.153:5500): Connection refused (error = 111)
2009-03-01 22:14:44 Thread-3086542528 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://78.129.247.153:5500/em/upload/: retStatus=-32
2009-03-01 22:14:44 Thread-3086542528 WARN command: Job Subsystem Timeout set at 600 seconds
2009-03-01 22:14:44 Thread-3086542528 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-03-01 22:14:44 Thread-3086542528 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
And this is from the emagent.log file
2009-03-01 20:44:26 Thread-3047507648 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 20:44:26 Thread-3047507648 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 21:37:17 Thread-3086870208 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 21:37:17 Thread-3086870208 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 21:42:09 Thread-3086194368 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 21:42:09 Thread-3086194368 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-03-01 22:14:44 Thread-3086542528 Starting Agent 10.2.0.3.0 from /Oracle/app/oracle/product/11.1.0/db_1 (00701)
2009-03-01 22:14:44 Thread-3086542528 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
Kindly help me in starting Enterpeise Manager 11gR1.
Regards, Imran

Dear All,
These are the messages/errors when I try to re-create OEM Repository.
Do you wish to continue? [yes(Y)/no(N)]: Y
02-Mar-2009 10:23:11 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log.
02-Mar-2009 10:23:11 oracle.sysman.emcp.EMReposConfig invoke
INFO: Dropping the EM repository (this may take a while) ...
02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
02-Mar-2009 10:23:12 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
02-Mar-2009 10:26:04 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
02-Mar-2009 10:26:05 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
02-Mar-2009 10:26:32 oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
02-Mar-2009 10:26:33 oracle.sysman.emcp.util.DBControlUtil configureSoftwareLib
INFO: Software library configured successfully.
02-Mar-2009 10:26:33 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Deploying Provisioning archives ...
02-Mar-2009 10:26:38 oracle.sysman.emcp.EMDBPostConfig configureSoftwareLibrary
INFO: Provisioning archives deployed successfully.
02-Mar-2009 10:26:38 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Securing Database Control (this may take a while) ...
02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
02-Mar-2009 10:26:48 oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
02-Mar-2009 10:29:58 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /Oracle/app/oracle/product/11.1.0/db_1/bin/emctl start dbconsole
02-Mar-2009 10:29:58 oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
Could not complete the configuration. Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssglbuk/emca_2009_03_02_10_22_08.log for more details.
Does it give some hint. I have try to publish all the information i could get.
Regards, Imran

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

How to Add a Physical Interface After Installation in Solaris 10

How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
Jack

Hi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do.

After Installation Errors in EM

Hello,
I have installed personal edition of 10g database.
After installation when I use my EM to manage database I get the error:
java.lang.Exception: Exception in sending Request :: null
When I click Perfomance link in EM and try to connect, it asks for authentication. Once I submit after providing all the necessary information I get the error :
Io exception: Unknown host specified.
What could be the reason for this?
I could connect to the same db using SQLDeveloper without any problems.
Any help would be highly appreciable.
Thanks

Thanks a lot for the information, however I have one doubt.
I already configured the database while installing the db. So should I do it again?
Here is the details when I ran the command.
Enter the following information:
Database SID: orcl
Database Control is already configured for the database orcl
You have chosen to configure Database Control for managing the database orcl
This will remove the existing configuration and the default settings and perform
a fresh configuration
Do you wish to continue? [yes(Y)/no(N)]:

Oracle instance always in 'shutdown' phase one day after installation

I have Windows 2003 Server (SP1) and Oracle database 10g release 2 installed.
On the installation day, after completing the installation everything worked just fine.
One day after that and on, everytime I boot up my OS the Oracle database instance is always in the 'shutdown' phase (though the listener is up).
So I have to manually start the database in 'open' mode.
The Enterprise Manager Console tells me that "TNS:Listener does not know the SID in the connect descriptor." This is strange, because I didn't change anything in the listener.ora and tnsnames.ora files after installation.
Could someone help me handle this problem?
Is this inherent in Oracle database 10g release 2?
P.S.: I have been using release 1 for some time and this never happened even months after installation.
Many thanks,
(Mario Andretti)

Please verify that you can get the database open manually.
If you can, then I suspect the problem is with the Enterprise Manager configuration. I believe the Enterprise Manager 10gR2 uses a different port by default than 10gR1. Depending on how you did the upgrade, you may need to look at the old port (or the new port) instead of the one you are using.
Further, if the database runs OK, and the problem is isolated to Enteprise Manager, you might be able to resolve the problem using emca (EM Config Assistant). In which case, I'd check the docs for further info, as I'm definitely a novice at emca.

OBS not working after Installation

Hi All,
I am having a had time to make OSB 10.3.0.3 x64 working on my Dell 1850 x64 machine with Windcows Server 2008 x64 on it.
OK, I've done is:
I do have a SCSI card attached to this server and a tape drive. All system is up to date with all latest drivers and firmware. I did install HP StorageWorks Library and Tape Tools to test my tape drive connectivity and performace and it is all good. After that I did install OSB , the installtion went just fine and it let me pick my tape drive. ...... and here I have issues....
1. After I finished my installation I went to windows services mmc to see if OSB service is running...and it wasn't, so I started it.
2. I went to CMD and typed "obtool" and got an error message:
obtool: Error: this host's identity to Oracle Secure Backup has not yet been established.
3. I tryed to run a Web Administration Tool and got an error page.
4. Restarted the server.
5. Apache log folder in OSB Home is empty, there is nothing there. Another thing I found that my "OSB HOME \admin\config" folder has only "dataset" folder in it when it should have folders inside. It looks like it is not configuring Apache and OSB domain for me after installation.
6. Went to CMD and run: "obtool --initnewdomain" and it let me to crete it. Even let me to get onto obtool after that but Web Admin Tool is still not working.
7. I run my HP StorageWorks Library and Tape Tools again to see if SCSI card and drive connectivity is fine.... and it cannot detect my drive anymore.
So, I did a lot of rebooting and reinstalling and it still doesn't work. There is nothing running on the same TCP port on my system and as long as OSB is installed I can not get into my tape drive using HP Tape drive tools, not even detect it.
I did a bit more testing, instead of installing x64 OSB version I did try to install x86 (32 bit) on my x64 machine. The result is that Web Admin tool is still down (I am sure it is because Apache x86 on x64 machine) which is OK, and obtool is running fine, I can start it....... so, what would be your suggestion ?
P.S. I do have a development server, which is absolutely the same including SCSI card, the only difference is that it has Windows 2003 x86 installed and has DB 11g running on it. I did connect my tape drive to thys system, installed OSB for testing and Web Admin Tool, obtool was just fine. I even was simply able to test tape backup from EMC using OSB.
Thanks

I did that....and many times.
I, figured it out!!!! When I did try to manually run "obhttpd.exe" it gave me an error that "msvcr71.dll " is missing. I've found that MS .Net Framework and MS Visual C++ 2005 contains it. So, before installing any updates on my machine, I did install all MS .Net Framework versions from 1.1 to 4.0 including all updates and Microsoft Visual C++ from 2005 to 2010. In addition, I did copy this DLL file into my System32 folder. Did install OSB and it still didn't work but "obhttpd.exe" was starting without error messages. The only thing I didn't try yet was to rename a server. So my server name was "san-manage3" and I renamed it to "san-bk3", rebooted, installed OSB and it worked. So, I don't know if it is because of long DNS name or all together, but it is fine now.

CAN'T ABLE TO STARTUP AFTER INSTALLATION

Dear Legends,
I have a new THINKPAD EDGE430 COREi5 64bit WITH 8GB RAM AND 500GB HDD, am trying to install ORACLE ENTERPRISE LINUX 5.7 in this machine and then I have to install a VISION INSTANCE 12.1.1.
ISSUE
====
1. After installation it asks for an restart and it has been restarted and i can see the starting flash screen and the naming "ORACLE ENTERPRISE LINUX SERVER 5.7" is being started, but after that i couldn't see any login screen or anything else.
2. So i have given a long press of my POWER BUTTON and made a restart for 3 - 5 times but the symptoms are same and each time i get a different colored screen such as green, white, blue and pink after the boot startup screen goes.
3. I couldn't proceed further to login.
4. At the same time I could see 2 options in the GRUB MENU loader at start such as (a) ORACLE ENTERPRISE LINUX.... and (b) ORACLE ENTERPRISE LINUX BASE...
5. Memory for crash kernel(0x0) (0x0) not within permissible range -- What does it means?
6. I have tried using both of the menu options but the result it same - no login screen or cant able to proceed further
NOTE: I have installed the same OS in another P4 and CORE2DUO MACHINES it works fine.
QUESTIONS
=======
1. Whether this configuration would be supporting OEL, RHEL 5?
2. Anyother OS will be working for this configuration?
3. Any drivers to be downloaded for this? since it is a FRESH one.
Any kind of help would be appreciated greatly
Thanks a lot in advance
Regards,
Karthik Singh

Hi Dude,
Thanks a lot for your reply, I thought the OS might be the problem but i think some VIDEO DRIVER or some thing should be enable into the BIOS. So i have re-installed RHEL 5 X86_64 but it also shows the same. as a try i have done pressing 'e' and it shows 3 parameters like
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-128.el5 ro root=LABEL=/1 rhgb quiet --> i have selected this one and pressed again 'e' and added "nomodeset" at the last
initrd /boot/initrd-2.6.18-128.el5.img
but i dont know what it is happening to start? because even in my P4 which has 2GB RAM it will load faster but as soon as it starts the kernel to read some 2 lines and "MY SCREEN GOES SOMEWHAT CRASH" and the same colors are appearing either blue, white, pink and violet.
I have tried CHANGING
1. DISPLAY MODE from LCD TO VGA -- VICE VERSA
2. CHANGED AHCI TO COMPATIBILITY -- VICE VERSA
IS there anything else that i have to do? am searching for a VIDEO DRIVER which will support for linux. and found a link whether i dont know it will help or not http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/linux-bootable-cd-16.txt
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS025448
Please can anyone provide any solution which would fix this issue for me.
Thanks a lot

I need help w/ This: missing gina dll after installation...

I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank you

I assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works .....

How to run executable after installation?

Hi everyone,
I created an installer from one labview program with the application builder
of Labview7.1 for my customer, and this installer will be burned
on a CD. There are several configuration files which should be always
modified, so I want to give the customer a possibility that he can
change them by himself without creation of a new installer , I think the
"run executable after installation" is the way to do it, but I don't know
how to implement such an executable command to copy some files from CD to
the destination directory which the program should be installed, could
anyone give me some tips? Thans a lot!
Le

When you setup your build file, add the files using SourceFile Tab>>add support files, then click on custom destination, here you can add support files during installation. Hope this is what you are looking for.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Problem after installation Project Server 2013 CU September 9, 2014

Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?

The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful.

SIA in stopped status after installation of SAP BO BI 4.0 SP02 Full Build

SIA in stopped status after installation of SAP BO BI 4.0 SP02 Full Build Version
Regards
Kapil

Hi Kapil,
Please post your question in the SAP Business Objects Administration.
Here you can only post questions to Integration Kit.
I think the installation of the default CMS database provided with BI 4.0 i.e SQL Server 2008 Express Edition was not proper.
Go to CCM.
Go to SIA Properties and select the Configuration tab.
Click on the option Specify for CMS database.
Repoint the CMS to any other available 64 bit Database.
Start SIA.
If the SIA starts then that was the issue.
Please post in the proper category for further assistance.

Do I need the installation medium after installation?

Hello all,
I just installed oes11 along with sles11 and, after fully patching the server, removed the installation dvd from the server. Now, everytime I open "OES Installation and Configuration" it prompts me to insert that dvd again... I thought after installing and using online repositories I wouldn't need it anymore, and it would not be nice to have a dvd mounted all the time.
I tried disabling the cd-repo, and then all of the OES products vanished from YAST...
I've searched the documentation but couldn't find any hints on what to do with the dvd after installation. What am I missing?

Is your server subscribed to the -Pool catalogs for SLES11 and OES11?
It actually is:
Code:
1 | nu_novell_com:OES11-SP1-Pool | OES11-SP1-Pool | Yes | Yes
2 | nu_novell_com:OES11-SP1-Updates | OES11-SP1-Updates | Yes | Yes
3 | nu_novell_com:SLE11-SP1-Debuginfo-Pool | SLE11-SP1-Debuginfo-Pool | No | Yes
4 | nu_novell_com:SLE11-SP1-Debuginfo-Updates | SLE11-SP1-Debuginfo-Updates | No | Yes
5 | nu_novell_com:SLE11-SP2-Debuginfo-Core | SLE11-SP2-Debuginfo-Core | No | Yes
6 | nu_novell_com:SLE11-SP2-Debuginfo-Updates | SLE11-SP2-Debuginfo-Updates | No | Yes
7 | nu_novell_com:SLE11-WebYaST-SP2-Pool | SLE11-WebYaST-SP2-Pool | No | Yes
8 | nu_novell_com:SLE11-WebYaST-SP2-Updates | SLE11-WebYaST-SP2-Updates | No | Yes
9 | nu_novell_com:SLES11-Extras | SLES11-Extras | No | Yes
10 | nu_novell_com:SLES11-SP1-Pool | SLES11-SP1-Pool | Yes | Yes
11 | nu_novell_com:SLES11-SP1-Updates | SLES11-SP1-Updates | Yes | Yes
12 | nu_novell_com:SLES11-SP2-Core | SLES11-SP2-Core | Yes | Yes
13 | nu_novell_com:SLES11-SP2-Extension-Store | SLES11-SP2-Extension-Store | Yes | Yes
14 | nu_novell_com:SLES11-SP2-Updates | SLES11-SP2-Updates | Yes | Yes
If so, you shouldn't need access to the installation media ... unless
you're hitting the issue described in TID 7011540 which I believe was
fixed with the April 2013 Scheduled Maintenance patch for OES11 SP1.
I just read that TID and the situation is not what I'm experiencing and I applied that patch right after installing the server. I will start downloading the separate isos now and post my results.

SMTP Configuration after Installation

Similar Messages

Maybe you are looking for