SMTP: retry send message

Hi All,
I have to implement email alerts as part of my application.(SMTP) I have to retry multiple times if the email is not sent successfully. I assume I have to retry if I get MessagingException or SendFailedException during Transport.send(). I only retry the validUnsent addresses in SendFailedException. Correct?
I couldn't find any info related to retry in http://www.oracle.com/technetwork/java/faq-135477.html
Thanks,
Bindu

No.
Unless you enable "partial send", a send failure means that the message wasn't sent to any
of the recipients.
However, you probably want to do more analysis of the failure. If sending failed because one
of the recipients is invalid, retrying isn't likely to make any difference.
Generally the best approach is to make sure you're using a mail server that's at least as reliable
as your application, possibly colocated with your application, and let it handle all the messy retry
logic. If you can't talk to your local mail server, something is seriously wrong.
If you're stuck using a public mail server of questionable reliability, consider inserting your own
mail server between your application and it.

Similar Messages

Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi.

Não estou conseguindo enviar e-mail utilizando SMTP Email Send Message vi. Uso a versão 8.6. Aparece a mensagem Error 66 occurred at TCP Read in NI_SMTPEmail.lvlibMTP Email TCP Read xTP Reply.vi:2->NI_SMTPEmail.lvlibMTP Email Command.vi:1->NI_SMTPEmail.lvlibMTP Email [QUIT].vi->NI_SMTPEmail.lvlibMTP Email Close Session.vi:3->NI_SMTPEmail.lvlibMTP Email Send Message Charset.vi:2->NI_SMTPEmail.lvlibMTP Email Send Message.vi:1->teste1.vi
Attachments:
imagem.JPG ‏160 KB

Bom dia Jean_ebrax,
o VI SMTP Email Send Message não suporta servidores SMTP que requerem autenticação. Se você quiser continuar utilizando este VI, você pode utilizar um servidor SMTP Local para testar o seu código. O link abaixo é de um servidor free:
http://www.softstack.com/freesmtp.html
Para mais informações, consulte este link:
http://digital.ni.com/public.nsf/allkb/57597451D40737058625729900589452?OpenDocument
Agora caso você queira utilizar servidores autenticados, você pode utilizar a plataforma .Net da Microsoft. Abaixo segue um exemplo:
https://decibel.ni.com/content/docs/DOC-2401
Estou a disposição para quaisquer esclarecimento.
Atenciosamente,
Ricardo Ramos
Engenheiro de Vendas - Sul
National Instruments Brasil

Help regarding SMTP Email Send Message

Hello everyone,
i am working on the SMTP Email Send Message using labview . i have connected the terminals as suggested in the Context Help and i can run the VI but a keep getting a lot of errors.
Needless to say i cant send the mail .
i have enclosed the vi , shall be grateful if somone can suggest any modifications so that the VI works.
I have also seen the GMAIL.vi but dont want to use as it seems complicated.
Thanks in advance
Attachments:
SMTP.vi ‏8 KB

Hello Ravens Fan,
i delved more into SMTP in Google and found out the following steps:
Open up a command prompt (CMD.exe)
Type nslookup and hit enter
Type set type=MX and hit enter
Type the domain name and hit enter, for example: google.com
The results will be a list of host names that are set up for SMTP
I am attaching a pic of my cmd after executing the steps. I updated the mail server in the SMTP Email Send Message block diagram and i got an error. i have also attached the pic for that
It would be very kind of you if you could guide me through
Regards
Jalashwa
Attachments:
CMD.png ‏560 KB
smtp error 2.png ‏100 KB

SMTP Email Send Message Error

When I using SMTP Email Send Message in Labview 8.0 to send an email message and I get a error message as bellow:
Error 16500 occurred at 500 5.5.1 Command unrecognized: "MIME-Version: 1.0"
Possible reason(s):
LabVIEW: (Hex 0x4074) 500 Syntax error, command unrecognized. For example, the command line might be too long.
Where the mistake and how to solve this error to send an email by Labview 8.0.
Thank you.

A couple of things. If you don't know what mail server you are using, you definitely need to get a hold of a network administator to see which one you use. Checking the mail server is a thing specific to the mail server itself, in other words there is no specific way that applies to them all. The example below requirs FDS 7.0 so if you don't have full developement system, it won't work. The handset question would be a great one to ask in another thread. I suggest also searching our website for information on that one as well. Hope that answers your questions.
Tyler H.
National Instruments
Attachments:
sendEmail.vi ‏66 KB

SMTP Email Send Message

Hello,
I want to use the "SMTP Email Send Message vi". I do not know how I can find the the IP Adresse from the mail server?

Ask the person who is responsible for the mail server.

How can I make mail retry sending messages in the Outbox?

Howdy all,
As the title says how can a force Mail to try to resend the messages in the outbox? I use my MacBook Pro in a number of different environments and when I am on one flakey access point in particular or when I have forgotten to open Safari to reauthorize recently on another network Mail will fail to contact the SMTP server. When this happens my message gets stuck in the outbox to be sent later. My problem is that I do not know how to get it out of there effectively.
Once I have fixed the transitive error in the network (or or the problem fixes itself) how do I get the messages out of the inbox? At this point I can send more messages with no problem and they will happily go out but those in the queue just sit there.
Now, I have tried a number of things like quitting and restarting Mail, bringing the various network interfaces back up and down, and other things to try to trick Mail into sending the queued messages but that has been haphazard at best. I can't help thinking that there is something obvious I am missing.
Thanks for any help!

Highlight the message in the inbox, double-click on it, and click on the "send" icon
You may even consider BCCing yourself to see whether the message actually goes or not, and you just have an artifact copy stuck in your outbox that you could then just delete.
Otherwise, copy&paste the stuck message body into a new message, and delete the stuck one out of the outbox before attempting to send the new one

Send message from jtextpane

how send message from jtextpane.
iam using com.jscape.inet.smtp for send message through textarea. In text area i take string and assign to string using gettext().
In case if textpane how to set body content to variable.

Hi raja8nz,
JTextPane extends JTextComponent, and JTextComponent provides the getText() method. So can't you just use getText()?
-Yeath
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test extends JFrame implements ActionListener
   private JTextPane jtp;
   public Test()
      super( "My Test" );
      this.getContentPane().setLayout( new BorderLayout() );
      this.jtp = new JTextPane();
      JButton jb = new JButton( "Click" );
      jb.addActionListener( this );
      this.getContentPane().add( this.jtp, BorderLayout.CENTER );
      this.getContentPane().add( jb, BorderLayout.SOUTH );
   public void actionPerformed( ActionEvent e )
      System.out.println( this.jtp.getText() );
   public static void main( String[] args )
      Test test = new Test();
      test.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
      test.setSize( 400, 400 );
      test.setVisible( true );
}

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

Can't send messages from Mail from Comcast account - "SMTP not responding"

Using Mail and a Comcast account, I can receive but not send. The error message on trying to configure the outgoing mail server says the SMTP server isn't responding. If I click continue to set up the account in Mail, then go to Mail Preferences and tweak the ports between 587 and 25, triple check the username and password for the outgoing server, etc. -- still no dice.
I wonder if this might be the problem: Is it possible to configure Mail when you're not using a Comcast installed modem? I'm trying to get my Dad's account up and running on my old Mac with my airport extreme to earthlink modem connection (which works fine for Earthlink and .Mac e-mail accounts.) Apple support and Comcast tech support are both stumped on this one, referring me back and forth to each other. HELP!
Thanks.

If I'm understanding this, you are trying to send messages with a Comcast account and SMTP server while connected to the internet with Earthlink?
If so, this is the cause of the problem. All ISPs now have restrictions on using an SMTP server that is outside of their network or not provided by the ISP used for connecting to the internet.
If you are connected to the internet with Earthlink at this house in California, contacting Comcast about a sending problem with their account and SMTP server when connected to the internet via Earthlink is a waste of time. You need to be contacting Earthlink if you are using Earthlink for your internet connection.
Do you also have an email account with Earthlink? If so, you can select/use Earthlink's authenticated SMTP server to send messages with your Comcast email account while connected to the internet with Earthlink or call Earthlink technical support regarding their required settings for an SMTP server that is outside of their network or not provided by Earthlink.

When sending messages from my iPad its says cannot send message retry

my iPad is saying error retry when sending messages over to my friends

A few more details would really be helpful. Describe how this all comes about.

Can javamail send messages other then smtp

you need the mail.smtp.host property if you're sending messages via SMTP. like this what are the other type of messages can javamail send...
Properties props = System.getProperties();
// -- Attaching to default Session, or we could start a new one --
props.put("mail.smtp.host", smtpServer);

Hi Scootmagoots,
From your post I see that you are unable to send or receive iMessage on your iPhone. While this is understandably a very frustrating issue there are troubleshooting steps I'd like you to follow through in order to get this resolved.
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Have a great weekend,
Alex H.

Send Message retry

Recently I have started a new thread on an issue related to Java Card Applets and iPhones (iPhone 4S STK bug ? - unfortunately that thread has been closed by EJP, not allowing me to share the knowledge with you. :(
Actually the root cause is clearly a bug on the iPhone's chipset, however, the terminal response was 0x20. According to GSM 11.14, it is worth to retry the message if the response is '2X'. And guess what, it works fine on the 2nd attempt.
I don't understand why that thread was closed as it become a very popular issue (in some countries we have more than 50% iPhones on the network) as it is important to implement a retry mechanism on the send message proactive command. Hope that hint will help others to deal with this issue.

A few more details would really be helpful. Describe how this all comes about.

Write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP

Hi,
The below error messgage i am getting while scheduling report in CMC. My report getting refreshed successfully but while posting refreshed file(Excel) it is not posting and throwing below error.
Error Message:
write error. [CrystalEnterprise.Smtp]: [Error sending mail message to SMTP server. Return code: [].]
please provide some help on this.
Thanks
Vivek

Hi Vivek
Mails to the destinations are delievered by SMTP server. Size of the file in the mail depends on the SMTP server.
For example, If SMTP server does not permit file size more than 2MB then that file won't be delievered.
For testing purpose copy the instance generated in Filestore to your local drive and send this instance using your mail client to
desired destination.
You can try sending large size file from your mail client to test SMTP server capacity of sending large size file.
Thanks,
Hrishikesh Parasnis

Mail: Cant Send Messages SMTP Error

When trying to send messages I get a SMTP connection error. I have found that the connection fails because the server name is incorrectly spelled. Mail seems to add my account name as an additional line in the server name. Example:
[email protected]:macmail
When I go to Mail>Preferences>Accounts>Edit Server List, the server is spelled correctly without the additional (:macmail) added on. Connection Doctor fails because of this misspelling and I cant seem to be able to stop mail from changing the server name. Any suggestions? Im stumped. Thanks in advance

Typically, Road Runner is a cable connection, and as is the case with several cable providers of broadband, the SMTP does not require separate Authentication -- they actually authenticate on the basis of the IP address stored in the modem they provide. In Mail Preferences/Accounts/Account Information click on the arrows beside the name of the Outgoing Server (as I think you have already mentioned finding), choose Edit Server List, and then choose the Advanced Tab. There you should check to use the Custom port, set to Port 25, and choose None as the method of Authentication. Remove any Username and Password entered there, and Save these settings. You should now be able to send with the RR SMTP. If you have a third party SMTP, then you may need different settings, so more info if that is the case.
Ernie
Message was edited by: Ernie Stamper

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

SMTP: retry send message

Similar Messages

Maybe you are looking for