SNC ReplenishmentOrderConfirmation_Out - ORDRSP.ORDERS05 did not trigger
Hi,
We have configured Contract_Manufacturing_Procurement scenario in which ECC sends PO (IDoc PORDCR102) to XI and from XI it is posted to SNC7.0. PO is visible on SNC and when supplier confirms PO manually on WebUI it should send confirmation back to ECC. But due to some reason SNC(SCM) is not triggering outbound message ReplenishmentOrderConfirmation_Out. Any idea?
End to end Scenario:
1) ECC -> XI -> SNC
PORDCR1.PORDCR102 ->ReplenishmentOrderNotification_In (Working fine)
2) SNC -> XI -> ECC
ReplenishmentOrderConfirmation_Out -> ORDRSP.ORDERS05 (Not working) ?????????
Let me know any input.
Hi Nilesh:
We are also facing same problem as u have faced .We have defined all necessary config to generate outbound xml but we are unable to get the answer.We are also geting dumed as "Assertion Failed".Can u please let us know that what are the step u have followed.
We have also activated all ODM and Time Series ODM but still getting dump.
PLease let us know ur views how to check all config to get rid of this issue.
Ganesh
Similar Messages
-
Workflow did not trigger the email notification to approver inbox
Hi SAP Gurus,
SRM 5.0
Extended Classic Scenario
CCM 2.0
Query : Work Flow triggers the professional purchaser PP in approval previw of SC but there is no email sent to the PP inbox.
No email notification is sent to the Professional purchaser inbox.
Can any one advice on this to locate the error.
Regards,
JayotiMany thanks all Specially Sravanan & Laurent
The issue has been resolved now . The problem was RFC Configuration was not setup for workflow in SWU3.
Problem : Email was not triggering in professional purchaser and approver inbox even though we can see I the approval preview screen at the portal
Solution : The work item step was not generating for Agent determination.
In Automatic Workflow Customization ( SWU3 ), Configure RFC Destination under Maintain Runtime Environment was not enabled.
Basis Team ran Perform Automatic Workflow Customizing button situated adjacent to Execute button. And the status for Configure RFC Destination changed from Red cross to Green Tick.
In Automatic Workflow Customization ( SWU3 ) -> Maintain Runtime Environment -> Configure RFC Destination
There were some more options below were in Crossed red status :-
We selected the particular step below and Right Click -> Auto- Customizing
1) Schedule Background Job for Missed Deadlines
2) Schedule Background Job for Work Items with Errors
3) Schedule Background Job for Condition Evaluation
4) Schedule Background Job for Event Queue
5) Schedule Background Job for Event Queue
Regards,
Jayoti -
Photos I did not take appear in my camera roll
This has happened twice to me this week. The first incident was last Thursday, I was looking through my camera roll (not photostream) and saw three pictures that I did not take. They were photos saved from the internet, as one of them was a 9gag meme. I was at the office that time so I guessed one of my officemates fooled around with my phone maybe. I didn't think anything of it. Then this morning, I woke up and found two more pictures on my camera roll that I didn't take. One photo was a picture of a windows desktop, which is weird because there aren't any windows computers in my household. Plus, I did not go out last night or anything, so my phone was with me the whole time. This is starting to worry me because this may be a security issue. Can a someone hack into my phone remotely and save photos into my camera roll? It's either that or I have a trigger happy alter-ego...
Any help would be greatly appreciated.FINALLY somebody having the same problem as mine. Thank you for sharing that, made me feel so much saner! It recently happened to me again, but I noticed that the photos came from a group chat on the WhatsApp app i have. Apparently when I open the conversation, some of the photos get saved to my camera roll. But still, not all the random photos came from WhatsApp. There are still some photos that just "magically" appear.
I really hope some explanation can be made. I'm sure we're not the only two with this problem. -
Issue :Storage bin is not trigger in TO
HI
I have totally two storage bin, i did PO- GRN, iam trying to do trasfer order . but system is not trigger storage bin during the
transfer order
1) how many storage bin required for creating transfer order.
2) iam trying to manage stock in one storage bin ,is it possible ?
with regards
dineshHi,
yes, you can use one storage bin till u don't have mention capacity of bin.
WM bin search strategy
Storage Bin Search Strategy is failing
http://help.sap.com/saphelp_470/helpdata/en/c6/f83fe54afa11d182b90000e829fbfe/content.htm
Kuber -
I ordered 3 new iPhones and the promo data did not show up.
I'm in the same boat. Upgraded 2 lines and have received 0 free GB promos. I have been on 4 separate calls to VZ and been promised the promo each time, yet nothing happens . The last time was with a supervisor who claimed to have fixed it and promised to personally follow up. Still no promo on my account and I've heard nothing from supervisor.
On one of the earlier calls, I spoke with a loyalty rep who stated that if you upgrade a line and switch to the More Everything plan in the same order (I did mine online), the free GB promo will not trigger if they don't change your plan before upgrading the line. This is what happened to me. She said it is a known glitch yet they have not been able to fix it on my account for over 2 weeks. Very frustrated with the amount of time I had to spend to try and get Verizon to honor their promo.
The 2nd line I upgraded I did a bit later and was already on the More Everything Plan, yet still no free GB promo. I would've thought this upgrade would not be susceptible to the 'glitch'.
TMobile offer to pay early termination fees for switching looking very tempting right now! -
Why both change and valueCommit did not fire?
I have a datagrid display the search result, when I click on one item from datagrid, then the selected item populate a textInput (txt01). I set a listener for the txt01. If the txt01.text change, it will call function initValue. But the event did not get fired.
I tried both ways
this. txt01.addEventListener('change', initValue);
this. txt01.addEventListener(valueCommit', initValue);
no one works. Please help!
Thank you in advance.I don't see the point of your event listener. If this method is the only one changing the value of the dispName.text property, then you don't need any event listener to trigger the call to the initEditPerson method.
Instead just use :
this.dispName.text = this.dgSearchNameList.selectedItem.editDisplayNname;
initEditPerson();
For now your event listener is not called because you add it after setting the property. To get the listener to get called, you need to put :
this.dispName.addEventListener("valueCommit",initEditPerson);
before any call to the dispName.text = "something".
For now the valueCommit event is dispatched at the line :
this.dispName.text = this.dgSearchNameList.selectedItem.editDisplayNname;
but at this point the event listener has not been added yet, so the valueCommit event has no listener registered for it. -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.
Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M -
I am having a data excess usage issue with my Jetpack although I did not use the VZW network at all.
Background: My home does not have access to landline internet and I am relying on a Verizon Jetpack device rather than satellite cable for internet access. Within my JetPack wireless network I have several devices connected, iPADs, PC’s, printer, etc. (up to 5 devices can be connected with my system). Recently, I had one device within my immediate wireless network that I needed to transfer data via FTP to another local device within my immediate network. The receiving device FTP’d data from device (198.168.1.42) to local IP (address 192.168.1.2). To understand the data path a Trace rout for this transfer is 198.168.1.42 (source) to 198.168.1.1 (Jetpack) to 192.168.1.2 (receiver). Note that the VZW network ((cloud)/4G network) was NOT used in this transfer nor was any VZW bandwidth used for this transfer (of course less the typical overhead status/maintenance communications that happen regardless). Use of the VZW bandwidth would be something like downloading a movie from Netflix, (transferring data from a remote site, through the VZW network, into the Jetpack and to the target device). I also understand if ones devices have auto SW updates that would also go against the usage as well. I get that. My understanding of my usage billing is based data transfer across the VZW network.
Now to the problem: To my surprise I was quite substantially charged for the “internal” direct transfer of this data although I didn’t use the VZW network at all. This does not seem to be right, and doesn’t make much sense to me. Usage is should be based on the VZW network not a local Wi-Fi. In this case, Verizon actually gets free money from me without any use of or impact to the VZW network. Basically this is a VERY expensive rental for the jetpack device, which I bought anyway. Considering this, I am also charged each time I print locally. Dive into this further, I am also interested in knowing what is the overhead (non-data) communications between the jetpack router and devices and how much does that add up to over time?
Once I realized I was getting socked in bandwidth, as a temp solution I found an old Wi-Fi router, created a separate Wi-Fi network off the Jetpack, but the billing damage was already done. Switching each device back and forth to FTP and print is a hassle and there should be no reason the existing hardware couldn’t handle this and charges aligned with VSW usage. Is purposely intended by Verizon? Is this charging correct? And can I get some help with this?
Logically, usage should be based on VZW network usage not internal transfers. All transfers between IP addresses 192.168 are by default internal. Any data that needs to leave the internal network are translated in to the dynamic IP addresses established by the VZW network. That should be very easily detected for usage. In the very least, this fact needs to be clearly identified and clarified to users of the Jetpack. How would one use a local network and not get socked with usage charges? Can one set up a Wi-Fi network with another router, hardwire directly from the router to the Jetpack so that only data to and from the VZW network is billed? I might be able to figure out how to have the jetpack powered on but disable the VZW connection, but I don’t want to experiment and find out that the internal transfers are being logged and the log sent after the fact anyway once I connect…. A reasonable solution should be that users be able to use the router functions of the Jetpack (since one has to buy the device anyway) and only be billed for VZW usage.
Your help in this would be greatly appreciated. Thanksi had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain -
Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?
Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue. -
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?
I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I added an e-mail account to my iphone using microsoft exchange; all went fine. I then deleted a number of contacts from my iphone that I did not want on my phone. when I went into my e-mail account on my computer the contacts were deleted from there also. Will I be able to retrieve them? If so, how? Thank you.
In the device sync pages select Photos on the top at the right.
Un tick Sync Photos
Apply -
9630 Keyboard/Buttons not working; hard resets and multiple reloads of OS did not correct
My BlackBerry 9630 Tour is a little more than a year old. Yesterday the keyboard, trackball, and all buttons stopped working while I was typing out an email. I could not power off the Blackberry without removing the battery for a hard reset. Unfortunately, even after many hard resets, the problem persisted, so I went to the forums for help and tried everything that seemed relevant (multiple times) with no success.
After reviewing a number of tech support posts, this problem does not appear to be unique to any given model of BB and contact with liquids is cited as a common but not the only cause for this condition.
I was outside on a very hot and humid day when the malfunction occurred so it is possible some perspiration may have come into contact with the keypad, convenience buttons, or trackball and caused the lockup.
I'm looking for someone with more smarts than me to help me troubleshoot, identify the actual problem, and identify the proper corrective actions. See below for a synopsis of my actions taken, with the exception of taking it to the shop for repair/replacement.
The corrective actions listed on the forums and blogs are varied but essentially fall into two primary solutions:
1. If moisture is suspected to be the issue, let the BB dry out overnight
a. Pull the battery, naturally air dry or use a blow dryer, let it sit unplugged with no battery for at least 12 hours
b. If this doesn't immediately work, try a clean install of the OS (see below)
c. If this doesn't work, take to the shop and they'll either replace the keyboard and/or trackball or replace entire unit
2. If moisture is not suspected to be a factor then perform a backup followed by a clean install of OS
a. Backup your files using Desktop Manager Backup and Restore
b. Do a clean reinstall OS using Desktop Manager Application Loader
i. The OS installation process is dicey and takes a little patience and focus-- you have to wait for the Desktop Manager to properly recognize the device before it can proceed on some of the steps and it may take several iterations to get completely through the process and get the "successful installation" message.
ii. Further, you may need to keep the battery removed during the initial steps in the process and only insert it when the process gets to the point of actually trying to copy files into the BB memory
* The BB LCD will display an icon that looks like a battery with a slash through it letting you know the process cannot proceed until a battery is inserted and the Desktop Manager Application Loader will also give you an error indicating it cannot find the device.
* After inserting the battery, it will take a few seconds or more for the computer to recognize the USB device and for Desktop Manager to respond with the BB password pop-up window.
* After typing in your BB password, the installation should continue.
c. If you can get the OS successfully reloaded and your keyboard/trackball/buttons work -- great -- now restore your files and settings using Desktop Manager Backup and Restore and get on with your life.
d. If this does NOT work after multiple successful clean OS installations apparently you are completely hosed; the only other option is to get it to the shop for repair or replacement.
1.. Does anyone have a troubleshooting procedures that will identify whether moisture is the root cause or not?
2. Is there another corrective procedure that's been missed?Took BB to Sprint Store and technician took it apart, saw no evidence of moisture or any other damage, and concluded that the keyboard had failed. Not an uncommon occurance.
Also, he told me you cannot simply replace the keyboard, it is integral to the systemboard, so you need to replace the entire device.
He did commend the troubleshooting approach used prior to going to the store -- most folks won't take the time to do even basic troubleshooting (like taking out the battery), they just go to the store and say "fix it please". He confirmed that the steps outlined in the initial post were correct and did not have any other solutions.
Take away:
If you want to do some troubleshooting yourself to check for moisture, the process was pretty straightforward. After watching the technician, most folks with a little technical or mechanical aptitude should be able to manage the dismantling process. You just need a small phillips head screwdriver and a little patience. Good lighting and a magnifying glass or reading glasses also help!
Maybe you are looking for
-
I am helping a friend set up his new iMac. He already has an iPhone 3G which has previously been synced with the old PC. The phone contains a number of purchased applications. It is synchronised via MobileMe. We have initiated MobileMe on the new Mac
-
I'm not even sure what to call this or how it got started on my computer. There is one finder window for firefox, and another for other programs etc. I want them all back in the same finder window, please! What feature is this which got things split
-
Hi, we offen use the ALV-GRID with EXCEL-Layout. In this layout you can Copy the sheet, print etc. But a lot of Function are grey and cannot be used. We want to send the excel-sheet via EXCEL-Button as an email. Question: is it possible to set this f
-
Possible to have "sub-templates" in Dreamweaver ?
Hello, I'm new to website building using dreamweaver, but I purchased a tutorial and I'm really starting to get it, though I have a question, let's say I want to create a website similar to this one : www.franzferdinand.co.uk All pages of that site h
-
How do I get this menu to show up in the Page Name section of the Halo Left Nav template? menu files: menuscript.css menustyle.css