SNC - SNI Details - Product View

Where all the product data relevant to this SNC view is stored in SAP SNC.
I mean which SAP tables store that data.
Is there any standard list of tables available for SAP SNC. Like Stock data table, Work order data table, Purchase order data table.
Please give any suggestions to fetch this data.

Hi,
Thanks for the reply. The vendor and the receiving location have a transportation lane defined.
What do you mean by the time duration that shows up in the T Lane corresponding to the inforecord?
Here are the times I see in transportation Lane;
Product Specific Transportation lane:
GR processing times (checked) : (No value defined) days
Planning Horizon: 0 days
Partner Horizon: 0 days
Horizon for Expctd receipts: 0 days
Horiz. Fut. Aval. Whse Stck: 0 days
Planned Delivery time: (No value Defined)
Means of Transport
Tsp. duration: 23 hrs
Bucket offset: 0.5
Period factor: 0.5
and no other times defined.
Are any of these effect the delay?
My ECC is EST and the timestream is EST. Should I change the product view (also my own data) to EST or UTC??
I have a product that has no delay between the start and end dates. The difference I see between the one that I am having problem (the start and end dates are apart ( I'm calling it bad one) by atleast a day) with and the one that has no delay(I'm calling this good one) between the start and end dates is the "Planned Delivery time.
The good one has 1 day and the bad one has nothing defined.
Does this make any difference?
Thanks.
Edited by: Raj G on Jul 17, 2008 3:36 PM

Similar Messages

Alternative unit of measure in Product View

I'd like to know the mechanism of how to convert the qunatity between base unit and alternative unit in Product View.
Example:
[Assumption]
Material: MAT001, Base Unit=KG, Alternative Unit=PC(1PC = 10KG)
Planned OrderA: MAT001, Quantity=108(KG)
[Process]
1. Open the product view and check the quantity. Quantity of planned orderA is 108KG.
2. Change the unit from base unit(KG) to alternative unit(PC).
3. Check the quantity. Quantity is 11(PC)
On the other hand...
4. Open the Stock/Requirement list(MD04) in ECC and check the quantity. Quantity of planed orderA is 108KG.
5. Change the unit from base unit(KG) to alternative unit(PC).
6. Check the quantity. Quantity is 10.8(PC)
Why quantity of Product View is automatically round up?

Hello Michel,
Thank you for the answer.
Could you let me know more detail about how to check the settings that you mentioned?
Which field of product master should I check?
I checked Units of Measure tab but I couldn't find the rounding-related field...
I also checked conversion setting of /CUNI transaction but settings of both ERP and APO were entirely same.
Do you have any other ideas?
Shohei

Product View - Start and End dates

Hi,
I have a material that is externally procured from a vendor to a location. In product view, I have few purchase requisitions. When i double click on it, it takes me to the details of PR. I am trying to understand what start and end dates of the PR are.
For some PRs, the start and end dates are same but for some there are is some times a day or two and even 3 in some cases.
I am wondering what makes the end date differ from start date.
There is a safety day's supply of 2.5 days
We have a transportation lane with transportation duration 23hrs.
Any of these play any role in the end date delay?

Hi,
Thanks for the reply. The vendor and the receiving location have a transportation lane defined.
What do you mean by the time duration that shows up in the T Lane corresponding to the inforecord?
Here are the times I see in transportation Lane;
Product Specific Transportation lane:
GR processing times (checked) : (No value defined) days
Planning Horizon: 0 days
Partner Horizon: 0 days
Horizon for Expctd receipts: 0 days
Horiz. Fut. Aval. Whse Stck: 0 days
Planned Delivery time: (No value Defined)
Means of Transport
Tsp. duration: 23 hrs
Bucket offset: 0.5
Period factor: 0.5
and no other times defined.
Are any of these effect the delay?
My ECC is EST and the timestream is EST. Should I change the product view (also my own data) to EST or UTC??
I have a product that has no delay between the start and end dates. The difference I see between the one that I am having problem (the start and end dates are apart ( I'm calling it bad one) by atleast a day) with and the one that has no delay(I'm calling this good one) between the start and end dates is the "Planned Delivery time.
The good one has 1 day and the bad one has nothing defined.
Does this make any difference?
Thanks.
Edited by: Raj G on Jul 17, 2008 3:36 PM

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

The "Details All" view in the SNP planning book is not sorted

The "Details All" view in the SNP planning book should be sorted by Product Description in ascending order.
When all products in the selection ID are loaded into the SNP planning book, and then "Details All" is selected from the Header area, the product description list is not sorted in ascending order.
However when I load small number of products the issue does not occur they get sorted correctly by product description.
Is this hapenning due to standard functionality/Standard macro in Planning book?
Please let me know if anybody has faced this kind of issue earlier.
Edited by: Rohit Arun Bhosale on Jul 5, 2010 1:05 PM

Hi Rohit,
If you are using Detail All drill down then you wonu2019t get any option for sort as it will load all codes from the selection in the planning book and sorting will be based on product IDs.
but if you drill down from header on detail all -filter, even if you sort the display list there using ascending/descending button for Description, the list that you will get in the planning book after load will be based on the Product IDs agian.
I hope this is controlled from the selection we do in planning book where we select Location/Product, but if your planning is better driven by the description then you can remove the Product ID selection from header setting and have only description in drill down.
Regards,
Digambar

Keep a checkbox checked on large product view with grouping

hi I have this problem with my checked checkbox on my large product view. I've used JS and all is working fine but when I group products and I select anything in the drop down other than the default the product view breaks and the checkbox becomes unchecked.
here is the site iv'e currently been working on for a long time!!
Beyonce - Midnight Blue
any help would be greatly appreciated
thanks luke

Hi Dave,
The catalogue page is actually the Overall Layout inside Online Shop layouts. When you access the catalogue directly that's the layotu that get's rendered. That layout has {tag_cataloguelist...} and {tag_productlist...} which render sub-catalogues and products within that catalogue respectively.
As for 2, I had a look at the site and it's behaving normally. Let me know if you need a detailed explanation of what it happening there.
Cheers,
-mario

PReqRel can not be seen in product view in apo

Hi expert
when we have stock transfer process, we can see purchase requistion for the material in procure plant in product view
in apo. And we can see TrRes. for this material in supplying plant. But we can not see related PReqRel in supplying plant in
apo. I don't know why. Which Material dependent object should be marked if we want to transfer PReqRel for the material?
Thank you in advance : )

Liting,
Data is right. This is the 'classic' case of missing Source of Supply
Open the Preq in rrp2 and see if a source of supply has been assigned. See if there is a valid transport activity in the preq. Look for available Transportation lane and ensure one exists.
If the problem is with incorrect Master Data, correct the data, delete the original preqs manually and rerun heuristics.
Let us know how you progress.
Abhi

Distr. Key GLEI in Prod. order not getting reflected in SCM product view

Hi,
We have the CIF integration model active to transfer production orders from R/3 to SCM-APO.
When we create a production order in R/3 it is getting transferred over to SCM and can be seen in Product view for the material-plant combination.
If we have the distribution key as GLEI on the production order in R/3, and we looked at stock requirements list-MD04 the receipts were split across evenly from the start date to the end date of the production order.
However, in the product view of SCM, the material was shown as available only at the end date of the production order with the full quantity.
Please provide any pointers as to something we might have missed out that made the CIF'ing not work properly...
Thanks & Regards,
Renjith John Andrews

Hi Renjith
Yes I do mean the Production Process Model. To check setting you need to do the following:
Transaction /sapapo/scc03
Click on choose plan via PPM and enter your material and location and press change.
Double click your operation
Double-click your activity
On the components tab you should see your "Output" material (Type O in I/O Indicator field), next to this should be the consumption indicator field. This is the one that has to be set to 'C'.
Hope this helps.
Regards
Ian

Horizons are missing in product view

Hi Frns,
In my product view of a KMAT material, the SNP Horizon & PP/DS Horizon lines are missing !! What could be the reason ??
I have maintained the horizons in the product master (SNP2 & PP/DS tabs)
Still the horizon lines are not visible in product view...
Thanks,
Krishna

my mistake..
made the product strategy group 10 in ERP..
when i made it 40, things are fine..

Forecast Consumption in APO- No Data Available in Product View

Hi Experts
I facing some problem in Forecast Consumption in APO. The APO system is connected to a R/3 system. So data relevant for Forecast consumption comes from R/3.
The allocation indicator in the requirement class assigned to the strategy maintained in the product master is set as " no consumption with customer requirement". and the same is transfered to APO.
I have the changed the settings in APO and here are the setting maintained in APO to enable Forecast Consumption.
Product Master Setting:
a) Consumption Mode: 2 ( forward and backward)
b) Consumption Period: ( 30 days both backward and forward)
c) Strategy Group : 20 and assignment mode is set to "Assign customer requirement to planning with final assembly" and category group has sales order - BM
d) The check mode setting in the ATP tab is set to "Assign customer requirement to planning with final assembly"
I have a forecast for today's date and a sales order transferred from R/3 for the same date. But I do not see any data in the Forecast tab in the product view ( /sapapo/rrp3 Tcode)
Please let me know if I am missing any setting in APO. Or the SAles order carries the strategy information from R/3 and influencing the consumption any way.

Hi,
What is your Forecast & Sales order quantity? If these are same then sales order consumed forecast, so you can not able to see in the rrp3.
Second thing try to increse the forecast quantity than sales order quantity & then check it.
Regards
Sujay

Error while creating planned order in product view

I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
Srini

Srini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49

How to retrieve selected item details (Product Id, Quantity) in Action clas

Hi
I want to retrieve the selected item details (Product Id, Quantity) in my custom action class .I am calling custom action event after u2018add to cartu2019 button clicked. I basically need these details to pass to custom BAPI. I can able to retrieve User Name and itemkey successfully. I Tried to retrieve the product , productID using WebCatItem but I was getting run time error and when I debug the code I can see webCatItem coming as null. Below is my code.
public class Z_AddToBasketAction extends BaseAction {
     /* (non-Javadoc)
@see com.sap.isa.core.BaseAction#doPerform(org.apache.struts.action.ActionMapping, org.apache.struts.action.ActionForm, javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     public ActionForward doPerform(
          ActionMapping mapping,
          ActionForm form,
          HttpServletRequest request,
          HttpServletResponse response)
          throws IOException, ServletException {
          //Cache.Access access = null;
          Map returnValues = null;
          UserSessionData userSessionData =
               UserSessionData.getUserSessionData(request.getSession());
               BusinessObjectManager bom =
                         (BusinessObjectManager) userSessionData.
                         getBOM(BusinessObjectManager.ISACORE_BOM);
     String selectedPartnerID = bom.getUser().getUserId();
     String strItemkey=request.getParameter("itemkey");
     WebCatItem webCatItem =     (WebCatItem) request.getAttribute(
                         com.sap.isa.catalog.actions.ActionConstants.RA_WEBCATITEM);
     //If you are looking at Product attributes.
      String att = webCatItem.getProduct()", "webCatItem.getProductID();
     ZBOM mybom = (ZBOM) userSessionData.getBOM(ZBOM.ZCUSTOM_BOM);
     return mapping.findForward("success");
Please help
Thanks
Aravind
Edited by: Aravinda Boyapati on Nov 30, 2010 10:21 PM

Hi Arvinda,
From which page you are trying to add products in cart? Are you selecting only 1 item at a time and then click on Add to cart button or you select more then 1 items to add into cart.
You can ceate hidden input filed and set their value through java script when you select any item. If more then 1 items then you can create an arry and set in the request parameter and then retrieve it in your custome class.
Regards.
eCommerce Developer.

Missing Process order components in product View

Dear all,
We have a problem with Process order in APO.
We have created a planned order in APO and converted to process order . All the components of the order are APO relevant and PPM is having all the components . When We create the planned order , RRP3 is showing all the components but when we convert the planned order to process order , then the components are missing in product view . But all the components are available in Process order in ECC . We deleted the process order in APO and again CIF the order from ECC to APO , but still the components are not appearing . We need to have all the components of the order to plan the dependent demands.
We checked the Queues and found no blocked queues .
Can any one suggest me what could be the problem.
Thanks & Regards
Prabhakar

Hi Prabhakar,
How are you integrating your production order - like are you sending the planned order to ECC and convert there or you are not transferring the planned order to ECC, but setting the conversion indicator in APO?
If you don't integrate the planned order to ECC, then all the components will be displayed in APOby exploding APO PDS - no active integration model required for components.
If you integrate the planned order to ECC, then in ECC, the BOM explosion happens. - So, active integration model required.
Regards,
Manimaran M.

Interactive Heuristic not working in product view

Good morning,
I am trying to run a Heuristic in the Product view (sapapo/rrp3) and I get the following message:
'Stage number algorithm can not be run in the simulation version' but I am trying to run this in our active version, any ideas?
thanks in advance.

Good afternoon,
The Heuristic maintained in the product master is the SAP_PP_002 (Standard lot) which is working but if you go into the header menu and we run the heuristic that replicates our nightly run (this is a 2 step planning run with SAP_PP_020 = Stage numbering algorithm and then SAP_PP_002 = standard lots).
It fails at the first step saying that it can not be executed in the simulation version?
Could this refer to the nature of the process rather than a simulation planning version? I mean due to the process that the number staging algorithm works, may not work running in APO and simulating the results (due to the data is only firmed once saved).

MSS Time Approval - Detailed approval view shows time data for different PN

Hi Experts,
We're using the standard MSS time approval without workflow and here're 2 issues we have:
There're multiple time records for multiple employees in MSS for approval.
1. When manager tried to select all the records for one employee and click the "Approve" button in the collective approval screen, then all the records will be approved including records of other employees.
2. When manager click the hours of one record for a certain employee to go to the detailed/individual view, other employee's time data will be displayed in the detailed view window.
Please help!
Thanks,
Hongling

Hello Kamalbabu,
after Migration of our ess applications from WebDynpro JAVA to Web Dynpro ABAP we have a problem that sounds similar to the one you descriped above.
In POWL the button 'details' (detail view) for leave request approval seem to have no function.
Because your post is a few years old, I guess you solved the problem and hope you can share your solution with us.
You will find more information about our specifc problem in this threat: http://scn.sap.com/message/15482063
Thank you.

SNC - SNI Details - Product View

Similar Messages

Maybe you are looking for