Missing Process order components in product View

Dear all,
We have a problem with Process order in APO.
We have created a planned order in APO and converted to process order . All the components of the order are APO relevant and PPM is having all the components . When We create the planned order , RRP3 is showing all the components but when we convert the planned order to process order , then the components are missing in product view . But all the components are available in Process order in ECC . We deleted the process order in APO and again CIF the order from ECC to APO , but still the components are not appearing . We need to have all the components of the order to plan the dependent demands.
We checked the Queues and found no blocked queues .
Can any one suggest me what could be the problem.
Thanks & Regards
Prabhakar

Hi Prabhakar,
How are you integrating your production order - like are you sending the planned order to ECC and convert there or you are not transferring the planned order to ECC, but setting the conversion indicator in APO?
If you don't integrate the planned order to ECC, then all the components will be displayed in APOby exploding APO PDS - no active integration model required for components.
If you integrate the planned order to ECC, then in ECC, the BOM explosion happens. - So, active integration model required.
Regards,
Manimaran M.

Similar Messages

CM38 is missing process orders

Hi Gurus,
CM38 is not considering all of the existing capacity requirements , it is missing process orders. But when I checked in CM01 for the same work center and plant combination , system is considering all of the requirements including process orders .Can anybody tell me what is the difference between CM38 & CM01 and also system behaviour.
Thanks in advance
Anil

Dear Anil,
CM38 is purely meant for simulated planned orders (LTP run) to check the available Vs Required
capacity.
Use CM01/CM04 to view the capacity in the normal cases.
Regards
Mangalraj.S

Order highlighted when product view is called.

Hi All,
In APO , We have one custom report which display all orders. By clicking on order number , it displays its product view. Here , product view contains many orders so it would become little tedious to find that order from long list.
Is there any way that product view is called with order number being highlighted so it become very easy to locate.
Rer,
Prashant

We have created custom interactive report which shows orders based on plant and product mentioned on selection screen. Here , if we click on any order within report , its product view is getting called. I am able to call product view but if there are many orders for that product location then it one has to search order number in product view. We need somehow if we click on order number within custom report , product view should be called with order number being highlited in product view ( in blue text ) so that user would know by which order number this product view was called.
I am calling call transaction "/SAPAPO/RRP*" from my custom report , here product view is getting called but I need to search order number ( need to remember order number while clikcing ) from long list in product view.
Does any on know any fucntion module or any way to highlight order number when product view is called.

Process orders in joint production: variance settlement to CO-PA

Dear all,
During integration test for costing based CO-PA, I have a problem regarding production variance settlement to CO-PA. I am testing CO-PA actual flows for november 2011. When I try to settle process orders with co-products for previous month, the system asks for PA transfer structure. Because of customizing setting for settlement profile being transfered later, previously created process order need to have this info, and i assigned PA structure manually in settlement rule for each process order. When I repeat variance settlement, only for process orders with co-product, the system still asks for this information, although I already had assigned PA structure to this order.
please give some advice.
Thanks Dusko

Hi
You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
br, Ajay M

Sales order appear in Product view but not available in Livecache

Dear Gurus,
We have an issue right now wherein there is a sales order with a certain line item that is consuming stock in ATP tab of product view but in Elements tab of the same material, the Sales Order is not seen. Because of this, some orders cannot be confirmed as the stock is not sufficient
We have tried /SAPAPO/OM17, SDRQCR21, and /SAPAPO/SDORDER_DEL to delete the Sales Order but no Sales Order is being selected.
Kindly let me know if there are other reports or process to be done to delete this inconsistency.
Thank you in advance,
Raymond

Hi
Go to transaction /sapapo/mvm go to the active version and check under ATP whether update fro, atp time series is checked. If not then to do atp check in apo you wud need to delete the active version and recreate it with the required setting.
Regards
Rajiv

Planned qty. and value for process order (components wise)

Hi Experts,
I need to capture the planned qty. (requirement qty.) and planned value of the components of a process order for some profit report. Please suggest me from which table i can get these values. (In RESB only req. qty. is there.)
Thanks
Nitin kapoor

COSP or MBEW would help get that info. But take help from your FI/Co colleague to understand the table better

Process Order tables and Production System Performance

Hi All,
What are the different tables of Process order? Also how do i know which table affects the system performance of Production system and to what extent if Change Logging is made active ?
The issue is in our clients place we would like to set the Change Logging ( Records changes made for any transaction ) for Process orders and we would like to know to which tables change logging should be made active so that Production system performance is not affected.
Please help me regarding this.
Thanks in Advance,
Neetha Avani.

All the changes done in any transaction are saved in CDPOS table.
when there is any report developed based on this table then the performance will be very slow.
Tables used for process orders are
AFKO            Order header data PP orders
AFPO            Order item
AFRU            Order Confirmations
AFRUHR        Order Confirmations for HR
AFRV             Confirmation pool
AFVC             Operation within an order
Hope the above helps.

Process Order COR2, main product + co-product automatic lots creation

Hello Gurus, I'm a programmer but before starting the enhancment of standard I want to be sure that there is no other solution (in customizing)
I have the following situation
Maint Product A
Co-product B
Current situtation
I have a process order in COR2, when the process order is released and than saved automatic inspection lot is created only for Maint Product A
Requiered situation
Requiered situation is that while process order release also the inspection lot for Co-product B should be created
Is there any chance to do it using customizng
At the moment for both materials A and B there is the same inspection type assinged and the orgin type is '04' and also the control of inspection lot creation is set to 'Y'.
Is there any chance to change sometihg (inspection type, orgin type, something in MM)
NOTE: I would like to do it without doing a GR for Co-product B but exactly have a lot for Co-Product after releasing PO in COR2 like it is for Main Product now
I will really appreciate your notes
Thank you in advance Bogumila
Edited by: Bogumila Wendt-Rybak on Jul 17, 2009 10:57 AM

I dont think we can have a inspection lot created automatically for the co-products upon the Order creation .i.e release...
U would have to make it via enhancement... also i believe u can customize a separte inspection type and then use it to create inspection lot..
hope this helps.
regards
csn

Process order components BI content

Hi,
We want to install BI infocubes which will have data from process order component from tables
AUFK + AFPO or CAUFV.
If anyboy is aware of this standard flow ,plz let me know. I am also searching on Help for same.
regards,
Shital

Hi ,
Check the standard multiprovider 0PP_MP03 - Plan/Actual Comparison Operation/Work Center View , The
multiprovider is based on cube 0PP_C03 and it receives data from the below datasource
2LIS_04_P_ARBPL: Work center view from PP/PP-PI ( gets information from AFKO , AFPO and AFVC
http://help.sap.com/saphelp_nw70/helpdata/en/bd/386a377a377832e10000009b38f8cf/frameset.htm
Hope this helps,
Sathya

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Automatic Batch determination for process order components

Hi ,
If we maintain the batch entry at MRP2 for the process order component as 3 - automatic batch determination upon order release ,if automatic batch determination is not happening for the order components and system is stopping to enter the batch for the component at order release , what else settings do we need to check ?
Please advice
Thanks ,
MK

Hi MK,
You need to go thru these configurations/setup:
1- CORC: Search Procedure is enter for Order type and Plant combination (PP-PI)
2- Assign the Search Procedure in transaction COR4 or OPL8 (COR4 for PPPI ot OPL8 for PP)
3- Batch Determination condition is maintained in COB1: this will generate the automatic determination of the batches.
4- Take a look of the field Batch Entry in MM02 (MRP2). This was already done by you.
Of course all your batches need to have the corresponding classification and you should assign correctly the search procedure in COB1.
Try with the previous steps and come back if you still don't get the automatic batch determination.
Best Regards,
Mariano

Process Order Source Display in SCM

Hello users, please forgive my ignorance in this are but I am trying to understand why a specific users would not have a Source/Target section in an SCM Process Order in a released status.
If the user drills into a process order from the product view then the following data sections should be available for display: Dates/Times, Primary Product, Status, *Source/Target*. For one user the Source/Target section is not displayed.
Is there a users specific setting that determines this display?
Thanks

Hi Christopher,
Are the authorizations for the specific user and any otehr user(for whom display is correct) similar ?
Regards
Datta

Should we use only one process order for each CO-product?

Dear All,
We have process orders. One process order opens per day.
Now we need to use CO-products and calculate actual cost of goods manufactured for them.
Suppose we have 30 process orders. We have specified Apportionment Structure in Material Master.
Then when we create process order we define actual Apportionment Structure in setllement rule as well.
After we have setlled all process orders would Material Ledger/ Actual costing run consider this Apportionment Structures from all 30 process orders?
I heard opinion from Consultant from SAP that it will not work.
Has anyone heard anything?
Best regards,
Kamila.

Hi Evgeniy,
Thanks for response
But we use process orders, not CO-production orders.
We open process order each day because management wants to have information about KPI of each schift.
We have defined in material master apportionment structure, When we create process order we define apportionment structure in settlement rule as well.
When we settle process orders our cost distributes to finished good and CO-product according with this apportionment structure.
But when we run ckmlcp ML/actual costing doesn't distribute raw material's price differences and Semifinished good's price differences according with this apportionment structure.
What can we do here?
Best regards,
Kamila.

Is there any soln to display production line for process order in COOISPI?

HI,
When we run COOISPI for planned orders, the field MDV01 "Production Line" populates correctly (based on the value in the production version associated with the planned order). However, you run COOISPI for process orders, that same field is now blank.
Any pointer on how to display MDV01 in case of Process order.
Thanks in advance

Thanks for your reply. my requirement is to populate the field value of production line in the CIOISPI report. I have production line assigned to production version. It does display if you see the results for Planned order but not for process order and the 'production line' field remains blank. More importantly i am trying to display the results for the same production version in case of process order,
Can you plz provide me any pointers or the way we can have production line value if want to display COOISPI for process order.
Regards,
Nitin

Process order type conflict

Hi,
I am trying to create a process order from a planned order. I have generated the planned order through MRP run. The process order that is generating taking process order type which is not desired. I want to know from where it takes the process order type while creating process order from a planned order. i have given the desired process order type in production scheduling profile i.e. TS03. but it is taking PI01. i want the type as TS03
the screen shot given below.
thanks in advance.

Hi Swastik,
Check to which planning strategy (MTS or MTO) you assigned the order type in the prod. scheduler profile. Make sure you use the same in the material master MRP 3 view.
Also check whether you have assigned the prod. scheduler profile in the material master work scheduling view.
Regards
Suri Pratyush

Missing Process order components in product View

Similar Messages

Maybe you are looking for