Snd_sb16 module loading problem

Every time I boot Arch, I have to manually load the snd_sb16 module. It works great while loaded with modprobe snd_sb16, but when rebooting, it won't load. I tried adding the module to /etc/modprobe.conf, but I get an error when rebooting. Perhaps the syntax is wrong?
Where else should I add the module so it will get loaded at boot?
Thanks.
m

multios wrote:Every time I boot Arch, I have to manually load the snd_sb16 module. It works great while loaded with modprobe snd_sb16, but when rebooting, it won't load. I tried adding the module to /etc/modprobe.conf, but I get an error when rebooting. Perhaps the syntax is wrong?
Where else should I add the module so it will get loaded at boot?
Thanks.
m
In /etc/rc.conf, you'll find MODULES section. Put that module to here.

Similar Messages

  • Module loader problem

    Hi,
         when a user click on menu item., I am using module loader  to load the module which will be added as a child to the tab navigator in my main application. The user can click on same menu item more than once.
      so same module can present  in the diiferent tab of  tab navigator.
      when can i unload the module?.If  user closes every tab, do i need to call unload() on every  loaded module. If i call unload() on every  loaded module, the same module present in the another tab is not working properly. It gives an null object reference, if i click on an button in it.
    Regards,
    Thiru

    Hi,
        Thanks for your reply.
      When i use unload on module loaded on tab,  will the corresponding module swf file from memory will be removed or not?
      If the module swf file is removed , then will it affect same module loaded in another tab?
      I am not clear about , when the module swf file will be removed from memory.
    Regards,
    Thiru

  • Iwl3945 module loading problem (with workaround)

    I've been experiencing problems with my intel wireless card (iwl3945) not loading at boot time. The problem arose after a fresh install from a Chakra (kdemod) live CD after I got a new harddrive for my notebook. It worked fine from the live CD and immediately post-install but when I upgraded the system with "pacman -Syu" (the kernel was upgraded as part of this) the card no longer loaded during boot (i.e. wlan0 would not show up under "ifconfig -a").
    I checked some threads on the iwl3945 (e.g. http://bbs.archlinux.org/viewtopic.php? … 18#p638618 and http://bbs.archlinux.org/viewtopic.php?id=73876) but couldn't find quite the same behaviour so decided to start a new thread.
    It's also similar to this thread (http://bbs.archlinux.org/viewtopic.php?id=82357), but this is not for the iwl3945.
    The following is a log of the problem:
    $ ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:15:C5:46:C6:6A
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:24 errors:0 dropped:0 overruns:0 frame:0
    TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1240 (1.2 Kb) TX bytes:1240 (1.2 Kb)
    $ ifconfig wlan0 up
    wlan0: unknown interface: No such device
    $ lsmod | grep iwl
    iwl3945 89020 0
    iwlcore 107100 1 iwl3945
    mac80211 155532 2 iwl3945,iwlcore
    led_class 4000 3 sdhci,iwl3945,iwlcore
    cfg80211 90428 3 iwl3945,iwlcore,mac80211
    $ dmesg | grep iwl
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    iwl3945: Copyright(c) 2003-2009 Intel Corporation
    iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    iwl3945 0000:0c:00.0: setting latency timer to 64
    iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
    iwl3945 0000:0c:00.0: Failed to register hw (error -2)
    iwl3945 0000:0c:00.0: PCI INT A disabled
    iwl3945: probe of 0000:0c:00.0 failed with error -2
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_GB.utf8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Dublin"
    KEYMAP="uk"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(b44 mii !ipw3945 iwlcore pcspkr snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="alex-xps"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    eth0="dhcp"
    # Wireless: See network profiles below
    wlan0="dhcp"
    #Static IP example
    #eth0="eth0 134.226.144.162 netmask 255.255.0.0 broadcast 134.226.255.255"
    INTERFACES=(!eth0 !eth1 !wlan0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng hal !network wicd !networkmanager avahi-daemon avahi-dnsconfd alsa cdemud kdm)
    I read somewhere that there was an issue with kill switches and that rfkill may help so I installed it from AUR. However, there didn't seem to be any block:
    $ rfkill list
    1: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
    2: dell-wifi: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    3: dell-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: no
    I also tried creating a modprobe.conf file as suggested in some quarters (/etc/modprobe.d/iwl3945.conf):
    alias wlan0 iwl3945
    options iwl3945 disable_hw_scan=1
    Sadly still no luck on a reboot.
    After much pulling of hair the following workaround finally did it for me. Basically even though the module doesn't load during boot I can remove it and then modprobe it manually and it then works so that I can bring up the interface:
    # rmmod iwl3945
    # modprobe iw3945
    # ifconfig wlan0 up
    # ifconfig -a
    eth0 Link encap:Ethernet HWaddr 00:15:C5:46:C6:6A
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    Interrupt:17
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:24 errors:0 dropped:0 overruns:0 frame:0
    TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1240 (1.2 Kb) TX bytes:1240 (1.2 Kb)
    wlan0 Link encap:Ethernet HWaddr 00:18:DE:1E:7B:46
    UP BROADCAST MULTICAST MTU:1500 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    wmaster0 Link encap:UNSPEC HWaddr 00-18-DE-1E-7B-46-00-00-00-00-00-00-00-00-00-00
    UP RUNNING MTU:0 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
    I can then use wicd to connect to my router at home (networkmanager doesn't seem to work for me with the same settings).
    Hopefully this may be of some use to someone with the same issue and to any kernel gurus that may be scanning this section of the forum.

    I tinkered with the rfkill module as suggested.
    First checked what the default behaviour was
    $ lsmod | grep rfkill
    rfkill 19728 3 bluetooth,dell_laptop,cfg80211
    Then blacklisted rfkill in rc.conf using "!rfkill" in the modules line
    $ lsmod | grep rfkill
    rfkill 19728 1 cfg80211
    Unfortunately I still had to manually remove and reload iwl3945 as before.
    I tried inserting the options in modprobe.conf suggested by you in your other post
    # /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
    options bluetooth rfkill=0
    options dell_laptop rfkill=0
    After a reboot still no wireless activity and checking rfkill module gives same as for blacklisting in rc.conf, i.e. ...
    $ lsmod | grep rfkill
    rfkill 19728 1 cfg80211
    So still manually un/reloading as before. At least the workaround is not too labour intensive.

  • Problem with module loading another module

    I have run into what appears to be a bug in Adobe Flex 3.3, but would like others opinion.  I have a simple application which loads a module.
    If a user checks a box, then the module loads a submodule and calls a funtion in that submodule which modifies the UI slightly.
    It really is simple code, but not easy to explain, so bear with me on this :-)  All code is attached.  Rename from *.txt to *.mxml.
    I have added an event listener to the submodule loader for the ModuleEvent.READY event so that I can call a function in it once it is loaded (the function modifies the UI):
    private function onModuleReady(event:Event):void{     Alert.show(
    "Module load successful", "Success");
         if (loader2.child is SubModule) {
              var module:SubModule = loader2.child as SubModule;          module.createCompleteHandler();
              module.modifyUI(pnlMain);
         }else {          Alert.show(
    "loader is NOT SubModule", "Failure");     }
    Stepping through the debugger, loader2.child IS INDEED a SubModule Class, yet I consistantly step into the else clause.  As I debugged this, I added a similar event listener for the READY even on the loading of the first module.  By just defining a new function in the main module, this code now works.  I don't have to actually call that function, just define it, meaning that if I comment out the entire function onModuleReady (the one defined in the main application that is just printing out a trace), I get the error stated above.
    <?xml version="1.0" encoding="utf-8"?><mx:Application 
    xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="createCompleteHandler()">
    <mx:Script>
    <![CDATA[
    importMainModule; 
    importmx.events.ModuleEvent; 
    private function createCompleteHandler():void{loader.url =
    "MainModule.swf";
    // loader.addEventListener(ModuleEvent.READY, onModuleReady);loader.loadModule();
    private function onModuleReady(event:Event):void{ 
    if (loader.child isMainModule) { 
    trace("here");}
    Please try the attached code, and try running it with the function onModuleReady implelented in the Application body and with it removed.  Why would defining a function that is never called for the first module affect the second module?

    I figured this out.  I needed to add loader.applicationDomain = ApplicationDomain.currentDomain;
    This fixes the problem.
     

  • Daemons and modules loaded at boot problem

    Hi all, i have a problem with my booting time and modules / daemons loaded at boot
    This is my bootchart:
    [IMG=http://img195.imageshack.us/img195/4701/bootchartpw.th.png][/IMG]
    This is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="it_IT.utf8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Rome"
    KEYMAP="it"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(lib80211_crypt_tkip wl !snd-pcsp !pcspkr)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="neplero"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    eth0="dhcp"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng netfs crond hal !dbus !bluetooth @alsa)
    How can i modify my modules loaded and daemons to lower some boot time.
    And why is that bluetooth is still loaded even if it's !bluetooth? And is it possible to background ntfs-3g?
    Thanks all for advices!

    Please clarify what you mean. If the bluetooth service is started, then there is a bug or something very very odd. IF on the contrary you mean that the bluetooth-related modules are loaded by udev, this is perfectly normal: udev autoloads modules according to your hardware, not to your services. You need to blacklist the loaded bluetooth-related kernel modules (check them with 'lsmod') and to blacklist them in the MODULES array.
    Last edited by patroclo7 (2010-01-30 19:14:51)

  • Audigy 4: DLL Module Loader (DLLML.exe) problem at shutd

    Hello,
    I would like to get feedback and/or confirmation on the problem I am describing below from Creative and owners of Audigy 4 Pros that are running the latest Audigy 4 Pro updates in Windows XP SP2 and an nForce 4-based system. I am convinced the problem is a driver issue. I am not sure, though, if this is similar to the known conflict between Creative's Remote Control service and nVidia's RAID service.
    For Creative, I am willing to try and test a newer build of a DLLML.exe file if any are available.
    Thanks in advance for your help on this.
    ---------- 8< cut here ----------
    Summary: There seems to be a problem with version .0.3.0 of the DLL Module Loader (DLLML.exe) file that is installed by one of the 3 available web updates for the Audigy 4 Pro. In particular, after these updates are installed, the Windows XP SP2 system generates the following error on every "Turn Off" and "Restart": Application popup: Audio Driver Emulator: DLLML.exe - Application Error : The instruction at "0x0ac42f" referenced memory at "0x00000008". The memory could not be "read". Click on OK to terminate the program
    The problem can be easily reproduced continuously.
    Workaround: Replacing the file DLLML.exe version .0.3.0 with version .0.8.0 found in the Audigy 4 Pro CD seems to solve the problem. This file is installed in C:\Program Files\Creative\Shared Files\Module Loader. The DLLML.exe file seems to be loaded at Windows startup by a service (?) called "AudioDrvEmulator" which runs the line "C:\Program Files\Creative\Shared Files\Module Loader\DLLML.exe" - AudioDrvEmulator "C:\Program Files\Creative\Shared Files\Module Loader\Audio Emulator\AudDrvEm.dll". It li'ves in the registry under HKLM\Software\Microsoft\Windows\CurrentVersion\Run
    Notes:
    - As of today, the updates available at Creative's web site are:
    * Creative Smart Recorder Patch for Creative Sound Blaster PCMCIA Audigy 2 ZS Notebook and Creative Sound Blaster Audigy 4 Pro audio cards version 2.0.56 (2 Dec 04)
    * Creative Audigy 4 Pro update version 3.00.55 (20 Dec 04)
    * Creative MediaSource 3 web update version 3.0.6 for PCMCIA Sound Blaster Audigy 2 ZS Notebook and Sound Blaster Audigy 4 (29 Dec 04)
    - The updates were applied from the oldest to the newest, one at a time, rebooting after each update was installed.
    - The system is a freshly installed Windows XP SP2 (slipstream) w/all the latest WindowsUpdate updates. Data Execution Prevention (DEP) has been disabled in the "boot.ini" file to work around a known issue with the latest nVidia network driver available for the nForce 4 chipset.
    - The system runs on an Asus A8N-SLI Deluxe w/003 BIOS, AMD Athlon 64 3500+, Mushkin 2GB PC3200 DDR 222 Black L2 Hi Perf LII V2, and Asus EAX800XT/PE/2DHTV/256. The system runs a Stripe RAID setup with a pair of WD Raptor HDs.
    - The system is run at stock speeds (i.e. no overclocking) and all the drivers are the latest version available from each manufacturer (none are BETA).
    Additional notes: The stock Audigy 4 Pro drivers have a known conflict with the "nvraidservice.exe"-based service when the Creative Entertainment Center's remote control service is run. Having these 2 services running at the same time would cause the "nvraidservice" to fail at Windows startup, and a few DCOM-related errors to be logged in the event logs. This issue with the nVidia RAID service stopped after applying the Audigy 4 Pro updates and disabling the remote control altogether in the Creative Entertainment Center control panel.

    Yes, using the DLLML.exe from the CD should work as it does in my setup. Do a search using the Windows search tool, and it should find two identical instances of the file in the CD, one of them in a CAB file. You should be able to copy & paste either instance to your C: dri've's location as long as the DLLML.exe file is not already loaded/running in memory.
    I had sent Creative's support an e-mail with exactly the same information, but unfortunately the first response I got from them was to do a cleansweep and install of the Creative software. I say "unfortunately" because Creative did not describe what are we trying to accomplish by "tainting" a fresh format/XP SP2 install with a massi've uninstall & reinstall of Creative software, even when I hoped narrowing the issue down to what seems to be a trivial EXE would have triggered some ideas as to what might be wrong with that particular version of the EXE file (i.e. it seems to be, after all, a DDL file loader, which does not seem to be driver engine code per se, but instead a DLL memory loader).
    As I mentioned to them, this system simply has a fresh XP install, all OS updates, all peripheral drivers, and the Creative card and software was the last thing installed in the box. No tweaks other than DEP turned OFF, no overclocking, no extraneous services running in the background, not even any additional software. Installation of the software was done by the letter, with proper reboots.
    I would appreciate if someone has an idea of what may be accomplished by a re-install of Creative software on a fresh OS install when the problem is squarely on the DLLML.exe file. You can be as specific as pinpointing DLL or registry entries that such a re-install is suppossed to fix (i.e. I am using the wrong files; a registry entry has the wrong value, etc.), and how this would have happened when following the installation steps as documented.
    Thanks in advance.

  • Acer Aspire One, modules load failed and autologin problem

    Hi,
    I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
    First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
    Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
    Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
    Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
    Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
    Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
    Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
    /usr/bin/xauth: file /var/run/slim.auth does not exist
    slim: waiting for X server to begin accepting connections
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
    Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
    Build Date: 17 September 2011 07:40:13AM
    Current version of pixman: 0.22.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) Logitech USB Receiver: failed to initialize for relative axes.
    /usr/bin/xauth: file /home/archone/.Xauthority does not exist
    which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
    The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
    ** (gsynaptics-init:3145): WARNING **: Using synclient
    ERROR: openbox-xdg-autostart requires PyXDG to be installed
    ============================================================================
    Cairo-Dock version: 2.3.0~2
    Compiled date: May 9 2011 21:48:33
    Running with OpenGL: 0
    ============================================================================
    tint2 : pixmap background detection failed
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
    while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
    Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
    You can't have window thumbnails in the dock
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
    while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
    an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
    empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
    while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
    Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

    Hi,
    I am having problem with modules loading. I haven't updated my netbook for a month or so (my motherboard was broken and it took me that long to finally repair it). After updating, which took ages and the installation size was about 2,2 GBs I have come across two problems.
    First one is modules loading being failed. On boot, everything is said to be DONE in green but with modules I get red FAIL. I am not an advanced user, so I don't really know what to paste, so I'll paste errors.log
    Oct 20 20:18:26 localhost kernel: [ 0.217828] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    Oct 20 20:18:26 localhost kernel: [ 0.217907] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff8000-0xffffffff pref]
    Oct 20 20:18:36 localhost kernel: [ 18.740305] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.740321] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
    Oct 20 20:18:36 localhost kernel: [ 18.849318] pciehp 0000:00:1c.2:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.849332] pciehp 0000:00:1c.2:pcie04: Cannot add device at 0000:03:00
    Oct 20 20:18:36 localhost kernel: [ 18.956303] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add
    Oct 20 20:18:36 localhost kernel: [ 18.956318] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00
    Oct 20 20:18:37 localhost dhcpcd[3196]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3202]: dhcpcd not running
    Oct 20 20:18:38 localhost dhcpcd[3209]: dhcpcd not running
    Another problem is with SLiM, or at least logging. I have my /home partition on my SD card. From time to time when I turn my computer on, I am being logged as root, not as my user. When I logout and login again, everything is fine. My slim.log
    /usr/bin/xauth: file /var/run/slim.auth does not exist
    slim: waiting for X server to begin accepting connections
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.0-ARCH i686
    Current Operating System: Linux archone 2.6.34-netbook #3 SMP Sat Jul 17 19:18:04 UTC 2010 i686
    Kernel command line: root=/dev/sda1 ro rootfstype=ext4 checkdisk quiet
    Build Date: 17 September 2011 07:40:13AM
    Current version of pixman: 0.22.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 20 20:18:25 2011
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    (EE) Logitech USB Receiver: failed to initialize for relative axes.
    /usr/bin/xauth: file /home/archone/.Xauthority does not exist
    which: no hsetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    which: no esetroot in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/core_perl)
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    tint2 : nb monitor 1, nb monitor used 1, nb desktop 1
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-X-utilities.c:cairo_dock_support_X_extension:581) [0m
    The dock was not compiled with the X extensions (XComposite, xinerama, xtst, XDamage, etc).
    ** (gsynaptics-init:3145): WARNING **: Using synclient
    ERROR: openbox-xdg-autostart requires PyXDG to be installed
    ============================================================================
    Cairo-Dock version: 2.3.0~2
    Compiled date: May 9 2011 21:48:33
    Running with OpenGL: 0
    ============================================================================
    tint2 : pixmap background detection failed
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:167) [0m
    while opening module '/usr/lib/cairo-dock/libcd-weblets.so' : (libwebkitgtk-1.0.so.0: cannot open shared object file: No such file or directory)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-applications-manager.c:get_config:1485) [0m
    Sorry but either your X server does not have the XComposite extension, or your version of Cairo-Dock was not built with the support of XComposite.
    You can't have window thumbnails in the dock
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:699) [0m
    while listing user packages in '/home/archone/.config/cairo-dock/third-party' : Error opening directory '/home/archone/.config/cairo-dock/third-party': No such file or directory
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_get_url_data_with_post:327) [0m
    an error occured while downloading 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0/list.conf' : Couldn't resolve host name
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_net_packages:646) [0m
    empty packages list on http://download.tuxfamily.org/glxdock/themes (check that your connection is alive, or retry later)
    [1;38mwarning : [0m [0;37m(/tmp/yaourt-tmp-arch/aur-cairo-dock/src/cairo-dock-2.3.0~2/src/gldit/cairo-dock-packages.c:cairo_dock_list_packages:710) [0m
    while listing distant packages in 'http://download.tuxfamily.org/glxdock/themes/third-party/2.3.0' : empty packages list on http://download.tuxfamily.org/glxdock/themes
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 776
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 777
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 778
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 1973
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 1974
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 1975
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 7574
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 7575
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 7576
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 9114
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 9115
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 9116
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 17878
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 17879
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 17880
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 23238
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 23239
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 23240
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 84117
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 84118
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 84119
    error 9: BadDrawable (invalid Pixmap or Window parameter) request 152 minor 1 serial 86307
    error 3: BadWindow (invalid Window parameter) request 20 minor 0 serial 86308
    error 3: BadWindow (invalid Window parameter) request 15 minor 0 serial 86309
    Months ago I have had problem with my SD card and did what it was said in this topic https://bbs.archlinux.org/viewtopic.php?id=115386. I don't know if it makes any difference, but it is worth saying. The problem from that topic still exists, when I put my /home into fstab, I am still getting error, that's why I have my mount in rc.local.

  • Fusion-icon loading problem

    Hi everyone.
    Recently I installed compiz fusion and I get this error when I load fusion-icon on the terminal.
    * Setting window manager to Compiz
    ... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp
    compiz (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
    compiz (core) - Error: Failed to manage screen: 0
    compiz (core) - Fatal: No manageable screens found on display :0.0
    I really don't know how to solve it. I've tried adding the extra needed options in xorg.conf to make it work but it still does not.
    Here it is if it would be of any help to solve this problem.
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    Load "dri"
    # Load "drm"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    # Option "XkbVariant" "us"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 30-81
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "My Video Card"
    Driver "radeon"
    Option "XAANoOffscreenPixmaps" "on"
    # unsupported card
    #VideoRam 512000
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "My Video Card"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Option "AddARGBGLXVisuals" "True"
    Option "DisableGLXRootClipping" "True"
    Option "RenderAccel" "True"
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    Option "AIGLX" "on"
    EndSection
    Section "DRI"
    Group "video"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Thanks in advance!

    Do you have those images in the right path?
    I tried it and it gave the same exception when the image did not exist.
    now that it exists it works well.

  • [SOLVED]3.18.5-1-ARCH + system-modules-load.service on Macbook Pro 9,2

    After upgrading from 3.18.4-1-ARCH to 3.18.5-1-ARCH this weekend, my systemd service system-modules-load fails during bootup. I checked out
    # systemctl status system-modules-load
    and found nothing but a warning that my journal has been rotated and the log output is incomplete. I have not hunted down the log or rooted through dmesg as of yet - I need my system functional while working during the week, so I downgraded my kernel back to 3.18.4 for now (under which system-modules-load loads fine). I will reinstall 3.18.5 next weekend and see if I can locate the problem - this post is just a feeler to see if anyone else is encountering this problem with the latest kernel.
    Last edited by Olorin (2015-02-06 03:08:31)

    Yep. It was my own fault. I had been using the b43 driver for my BCM4331 wifi card, and recently switched to broadcom-wl. However, I still was trying to load b43 in /etc/modules-load even though I had removed the driver and module from my system. Not sure why my system only started complaining in 3.18.5, but in any case removing the offending .conf file solved the problem. Thanks, graysky.

  • PHP server didn't have mysql module loaded

    i'm using dreamweaver 8 and develop application on php +
    mysql. when connecting to mysql .. the message " your php server
    doesn't have the mysql module loaded ...... " . By the way, my php
    page doesn't have any problems when testing it on IE .. and i have
    edit the php.ini properly where i enable the php_mysql.dll. the
    php_mysql also exist in c:\php\ext
    I'm using windows xp sp2
    dreamweaver 8
    IIS 5
    PHP 5.1.2
    MySQL 5.0

    ryanfaizal wrote:
    > i'm using dreamweaver 8 and develop application on php +
    mysql. when connecting
    > to mysql .. the message " your php server doesn't have
    the mysql module loaded
    > ...... " . By the way, my php page doesn't have any
    problems when testing it on
    > IE .. and i have edit the php.ini properly where i
    enable the php_mysql.dll.
    > the php_mysql also exist in c:\php\ext
    Run <?php phpinfo(); ?> and check whether mbstring,
    mysql, and mysqli
    are listed in the configuration. You need all three to work
    successfully
    with MySQL 5 and PHP 5.
    Remove the semicolon from the beginning of the following
    line:
    ;extension=php_mbstring.dll
    Also add this to the list of Windows extensions in php.ini:
    extension=php_mysqli.dll
    If MySQL and MySQLI aren't listed in the configuration page,
    it means
    that Windows can't find libmysql.dll. You either need to add
    the PHP
    folder to your Windows PATH, or to copy libmysql.dll from the
    PHP folder
    to C:\Windows\system32.
    Restart IIS after making the changes.
    David Powers
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "Foundation PHP 5 for Flash" (friends of ED)
    http://foundationphp.com/

  • [SOLVED] systemd-modules-load fails

    .. because it cannot find gspca. My log:
    journalctl -xn
    -- Logs begin at Thu 2013-08-22 11:43:18 CEST, end at Mon 2014-06-23 14:26:30 CEST. --
    Jun 23 14:25:21 jiggs org.kde.knotify[1825]: "/org/freedesktop/UDisks2/block_devices/loop7" has new interfaces: ("org.
    Jun 23 14:25:22 jiggs org.kde.knotify[1825]: "/org/freedesktop/UDisks2/block_devices/loop2" has new interfaces: ("org.
    Jun 23 14:25:22 jiggs org.kde.knotify[1825]: "/org/freedesktop/UDisks2/block_devices/loop1" has new interfaces: ("org.
    Jun 23 14:25:22 jiggs org.kde.knotify[1825]: "/org/freedesktop/UDisks2/block_devices/loop0" has new interfaces: ("org.
    Jun 23 14:26:19 jiggs org.kde.knotify[1825]: "/org/freedesktop/UDisks2/block_devices/loop0" lost interfaces: ("org.fre
    Jun 23 14:26:30 jiggs systemd[1]: Starting Load Kernel Modules...
    -- Subject: Unit systemd-modules-load.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-modules-load.service has begun starting up.
    Jun 23 14:26:30 jiggs systemd-modules-load[3138]: Failed to find module 'gspca'
    Jun 23 14:26:30 jiggs systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
    Jun 23 14:26:30 jiggs systemd[1]: Failed to start Load Kernel Modules.
    -- Subject: Unit systemd-modules-load.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-modules-load.service has failed.
    -- The result is failed.
    Jun 23 14:26:30 jiggs systemd[1]: Unit systemd-modules-load.service entered failed state.
    But I have lots of gspca's:
    # ls /lib/modules/`uname -r`/kernel/drivers/media/usb/gspca
    gl860 gspca_kinect.ko gspca_ov534.ko gspca_sonixj.ko gspca_sq905c.ko gspca_topro.ko
    gspca_benq.ko gspca_konica.ko gspca_pac207.ko gspca_spca1528.ko gspca_sq905.ko gspca_tv8532.ko
    gspca_conex.ko gspca_main.ko gspca_pac7302.ko gspca_spca500.ko gspca_sq930x.ko gspca_vc032x.ko
    gspca_cpia1.ko gspca_mars.ko gspca_pac7311.ko gspca_spca501.ko gspca_stk014.ko gspca_vicam.ko
    gspca_etoms.ko gspca_mr97310a.ko gspca_se401.ko gspca_spca505.ko gspca_stk1135.ko gspca_xirlink_cit.ko
    gspca_finepix.ko gspca_nw80x.ko gspca_sn9c2028.ko gspca_spca506.ko gspca_stv0680.ko gspca_zc3xx.ko
    gspca_jeilinj.ko gspca_ov519.ko gspca_sn9c20x.ko gspca_spca508.ko gspca_sunplus.ko m5602
    gspca_jl2005bcd.ko gspca_ov534_9.ko gspca_sonixb.ko gspca_spca561.ko gspca_t613.ko stv06xx
    The only difference I have with respect to a standard installation is that I downloaded an older version of the backport drivers, and in doing so I surely re-installed gspca.
    So my questions are: where is systemd-module-load searching for gspca? How can I persuade it to search in the right directory? And in any case, why is it searching for it in the wrong place to start with?. Just in case,
    # uname -a
    Linux jiggs 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64 GNU/Linux
    Last edited by MariusMatutiae (2014-06-26 09:10:22)

    Problem solved, thanks to both of you guys. For some resason, I had a webcam.conf file in /etc/modules-load.d containing the single line *gspca*, which is not a module: both modprobe and insmod fail, because the correct module name is one of those listed in /lib/modules/`uname -r`/kernel/drivers/media/usb/gspca. They are called gspca_benq.ko       gspca_konica.ko and so on. I simply deleted the file since I  do not need it.
    As for backport drivers: this site, http://drvbp1.linux-foundation.org/~mcg … backports/ has the most recent versions of Linux drivers, backported so that older kernels can install them (I understand this is not a concern for fellow Archers). Whenever I need to upgrade (mostly on Debian) or downgrade (a few times on Arch, because an older version of a driver is free of a newly minted bug) I download these drivers, compile them and install them from source.

  • Failed systemd-modules-load - X won't start

    So i recently updated my arch system, and after a restart i couldn't start a vnc session with it.
    Soon after that i discovered that X isn't running, so i checked journalctl -xn to find out that
    systemd-module-load
    has failed to start.
    At the startup, it also shows that that module has failed to load and the startup process is stuck at
    [reached] target graphical interface
    Only way to do stuff is to get on another ttyl or connect per ssh.
    What i tried so far (read somewhere that these helped some people)
    - Reinstall catalyst with aticonfig --initial
    - Reinstall systemd-tools
    - mkinitcpio -p linux, result is successfull
    Current version i'm running:
    Arch 3.8.5-1 64bit
    Ati Catalyst 13.3-5
    edit:
    This is the Xorx.0.log
    [ 10.337]
    X.Org X Server 1.13.3
    Release Date: 2013-03-07
    [ 10.337] X Protocol Version 11, Revision 0
    [ 10.337] Build Operating System: Linux 3.8.2-1-ARCH x86_64
    [ 10.337] Current Operating System: Linux server 3.8.5-1-ARCH #1 SMP PREEMPT Fri Mar 29 19:18:14 CET 2013 x86_64
    [ 10.337] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7dacf662-5f86-4141-ba35-c45eeac4a814 ro nomodeset verbose verbose
    [ 10.337] Build Date: 09 March 2013 08:45:37AM
    [ 10.337]
    [ 10.337] Current version of pixman: 0.28.2
    [ 10.337] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 10.337] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 10.338] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 6 16:10:43 2013
    [ 10.412] (==) Using config file: "/etc/X11/xorg.conf"
    [ 10.412] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 10.482] (==) ServerLayout "aticonfig Layout"
    [ 10.482] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 10.482] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 10.482] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 10.482] (==) Automatically adding devices
    [ 10.482] (==) Automatically enabling devices
    [ 10.482] (==) Automatically adding GPU devices
    [ 10.594] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 10.594] Entry deleted from font path.
    [ 10.594] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 10.595] Entry deleted from font path.
    [ 10.595] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 10.595] Entry deleted from font path.
    [ 10.595] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 10.595] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 10.596] Entry deleted from font path.
    [ 10.596] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 10.596] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 10.596] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 10.596] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 10.596] (II) Loader magic: 0x7fcc20
    [ 10.596] (II) Module ABI versions:
    [ 10.596] X.Org ANSI C Emulation: 0.4
    [ 10.596] X.Org Video Driver: 13.1
    [ 10.596] X.Org XInput driver : 18.0
    [ 10.596] X.Org Server Extension : 7.0
    [ 10.597] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 10.604] (--) PCI:*(0:0:1:0) 1002:9802:1849:9802 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
    [ 10.656] Initializing built-in extension Generic Event Extension
    [ 10.656] Initializing built-in extension SHAPE
    [ 10.656] Initializing built-in extension MIT-SHM
    [ 10.656] Initializing built-in extension XInputExtension
    [ 10.656] Initializing built-in extension XTEST
    [ 10.656] Initializing built-in extension BIG-REQUESTS
    [ 10.656] Initializing built-in extension SYNC
    [ 10.656] Initializing built-in extension XKEYBOARD
    [ 10.656] Initializing built-in extension XC-MISC
    [ 10.656] Initializing built-in extension SECURITY
    [ 10.656] Initializing built-in extension XINERAMA
    [ 10.656] Initializing built-in extension XFIXES
    [ 10.656] Initializing built-in extension RENDER
    [ 10.656] Initializing built-in extension RANDR
    [ 10.656] Initializing built-in extension COMPOSITE
    [ 10.656] Initializing built-in extension DAMAGE
    [ 10.656] Initializing built-in extension MIT-SCREEN-SAVER
    [ 10.656] Initializing built-in extension DOUBLE-BUFFER
    [ 10.656] Initializing built-in extension RECORD
    [ 10.656] Initializing built-in extension DPMS
    [ 10.656] Initializing built-in extension X-Resource
    [ 10.656] Initializing built-in extension XVideo
    [ 10.656] Initializing built-in extension XVideo-MotionCompensation
    [ 10.656] Initializing built-in extension XFree86-VidModeExtension
    [ 10.656] Initializing built-in extension XFree86-DGA
    [ 10.656] Initializing built-in extension XFree86-DRI
    [ 10.656] Initializing built-in extension DRI2
    [ 10.656] (II) "glx" will be loaded by default.
    [ 10.657] (II) LoadModule: "glx"
    [ 10.737] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 10.838] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 10.838] compiled for 6.9.0, module version = 1.0.0
    [ 10.838] Loading extension GLX
    [ 10.838] (II) LoadModule: "fglrx"
    [ 10.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 11.675] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 11.675] compiled for 1.4.99.906, module version = 12.10.5
    [ 11.675] Module class: X.Org Video Driver
    [ 11.676] (II) Loading sub module "fglrxdrm"
    [ 11.676] (II) LoadModule: "fglrxdrm"
    [ 11.676] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 11.729] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 11.729] compiled for 1.4.99.906, module version = 12.10.5
    [ 11.729] (II) AMD Proprietary Linux Driver Version Identifier:12.10.05
    [ 11.729] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-12.10.17
    [ 11.729] (II) AMD Proprietary Linux Driver Build Date: Mar 20 2013 21:34:16
    [ 11.729] (++) using VT number 7
    [ 11.739] (WW) Falling back to old probe method for fglrx
    [ 12.090] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 12.303] ukiDynamicMajor: failed to open /proc/ati/major
    [ 12.303] ukiDynamicMajor: failed to open /proc/ati/major
    [ 12.307] (--) Chipset Supported AMD Graphics Processor (0x9802) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
    [ 12.324] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
    [ 12.327] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 12.345] (II) AMD Video driver is signed
    [ 12.349] (II) fglrx(0): pEnt->device->identifier=0x27bdb40
    [ 12.349] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
    [ 12.350] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 12.350] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 12.350] (==) fglrx(0): Default visual is TrueColor
    [ 12.350] (**) fglrx(0): Option "DPMS" "true"
    [ 12.350] (==) fglrx(0): RGB weight 888
    [ 12.350] (II) fglrx(0): Using 8 bits per RGB
    [ 12.350] (==) fglrx(0): Buffer Tiling is ON
    [ 12.351] (II) Loading sub module "fglrxdrm"
    [ 12.351] (II) LoadModule: "fglrxdrm"
    [ 12.351] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 12.351] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 12.352] compiled for 1.4.99.906, module version = 12.10.5
    [ 12.461] ukiDynamicMajor: failed to open /proc/ati/major
    [ 12.461] ukiDynamicMajor: failed to open /proc/ati/major
    [ 12.462] (**) fglrx(0): NoAccel = NO
    [ 12.462] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 12.462] (--) fglrx(0): Chipset: "AMD Radeon HD 6310 Graphics" (Chipset = 0x9802)
    [ 12.462] (--) fglrx(0): (PciSubVendor = 0x1849, PciSubDevice = 0x9802)
    [ 12.462] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 12.462] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    [ 12.462] (--) fglrx(0): MMIO registers at 0xfeb00000
    [ 12.462] (--) fglrx(0): I/O port at 0x0000f000
    [ 12.462] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 12.538] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
    [ 12.538] (EE) fglrx(0): Invalid video BIOS signature!
    [ 12.538] (EE) fglrx(0): GetBIOSParameter failed
    [ 12.538] (EE) fglrx(0): PreInitAdapter failed
    [ 12.538] (EE) fglrx(0): PreInit failed
    [ 12.538] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
    [ 12.576] (II) UnloadModule: "fglrx"
    [ 12.576] (II) UnloadSubModule: "fglrxdrm"
    [ 12.576] (II) Unloading fglrxdrm
    [ 12.576] (II) UnloadSubModule: "fglrxdrm"
    [ 12.576] (EE) Screen(s) found, but none have a usable configuration.
    [ 12.577]
    Fatal server error:
    [ 12.577] no screens found
    [ 12.577] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 12.577] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 12.577] (EE)
    [ 12.602] Server terminated with error (1). Closing log file.
    And this is the pacman log with the updates
    [2013-04-06 03:57] [PACMAN] Running 'pacman -Syyu'
    [2013-04-06 03:57] [PACMAN] synchronizing package lists
    [2013-04-06 03:57] [PACMAN] starting full system upgrade
    [2013-04-06 04:18] [PACMAN] upgraded boost-libs (1.52.0-3 -> 1.53.0-2)
    [2013-04-06 04:18] [PACMAN] upgraded akonadi (1.9.1-2 -> 1.9.1-3)
    [2013-04-06 04:18] [PACMAN] upgraded avogadro (1.1.0-3 -> 1.1.0-4)
    [2013-04-06 04:18] [PACMAN] upgraded linux-api-headers (3.7.4-1 -> 3.8.4-1)
    [2013-04-06 04:18] [ALPM-SCRIPTLET] Generating locales...
    [2013-04-06 04:18] [ALPM-SCRIPTLET] de_DE.UTF-8... done
    [2013-04-06 04:18] [ALPM-SCRIPTLET] en_US.UTF-8... done
    [2013-04-06 04:18] [ALPM-SCRIPTLET] Generation complete.
    [2013-04-06 04:18] [PACMAN] upgraded glibc (2.17-3 -> 2.17-4)
    [2013-04-06 04:18] [PACMAN] upgraded binutils (2.23.1-3 -> 2.23.2-1)
    [2013-04-06 04:18] [PACMAN] upgraded cups-filters (1.0.31-1 -> 1.0.33-1)
    [2013-04-06 04:18] [PACMAN] upgraded libpulse (3.0-2 -> 3.0-3)
    [2013-04-06 04:18] [PACMAN] upgraded ffmpeg (1:1.2-1 -> 1:1.2-2)
    [2013-04-06 04:18] [PACMAN] upgraded firefox (19.0.2-1 -> 20.0-1)
    [2013-04-06 04:18] [PACMAN] upgraded firefox-i18n-de (19.0.2-1 -> 20.0-1)
    [2013-04-06 04:18] [PACMAN] upgraded gcc-libs (4.7.2-4 -> 4.8.0-1)
    [2013-04-06 04:18] [PACMAN] upgraded gcc (4.7.2-4 -> 4.8.0-1)
    [2013-04-06 04:18] [PACMAN] upgraded kdelibs (4.10.1-2 -> 4.10.2-1)
    [2013-04-06 04:18] [PACMAN] upgraded nepomuk-core (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:18] [PACMAN] upgraded kactivities (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:18] [PACMAN] upgraded kde-base-artwork (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kde-l10n-de (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kde-wallpapers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded oxygen-icons (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdebase-runtime (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeaccessibility-jovie (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeaccessibility-kaccessible (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeaccessibility-kmag (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeaccessibility-kmousetool (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeaccessibility-kmouth (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeadmin-kcron (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeadmin-ksystemlog (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdepimlibs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeadmin-kuser (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-colorschemes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-desktopthemes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-emoticons (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-iconthemes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdepim-runtime (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded lm_sensors (3.3.3-1 -> 3.3.3-2)
    [2013-04-06 04:19] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2013-04-06 04:19] [PACMAN] upgraded kdebase-workspace (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded libkexiv2 (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-kscreensaver (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-sounds (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-styles (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:19] [PACMAN] upgraded kdeartwork-wallpapers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeartwork-weatherwallpapers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-lib (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded nepomuk-widgets (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-dolphin (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-katepart (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-kdepasswd (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-kdialog (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-keditbookmarks (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-kfind (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-konqueror (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-konq-plugins (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-konsole (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-kwrite (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebase-plasma (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebindings-python-common (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdebindings-python2 (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-analitza (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-blinken (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-cantor (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded libkdeedu (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kalgebra (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kalzium (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kanagram (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kbruch (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kgeography (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-khangman (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kig (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kiten (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-klettres (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kmplot (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kstars (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-ktouch (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kturtle (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-kwordquiz (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-marble (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-pairs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-parley (4.10.1-2 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-rocs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded kdeedu-step (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:20] [PACMAN] upgraded libkdegames (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-bomber (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-bovo (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-granatier (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kajongg (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kapman (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-katomic (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kblackbox (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kblocks (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kbounce (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kbreakout (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kdiamond (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kfourinline (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kgoldrunner (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kigo (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-killbots (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kiriki (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kjumpingcube (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-klickety (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-klines (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded libkmahjongg (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kmahjongg (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kmines (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-knavalbattle (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-knetwalk (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kolf (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kollision (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-konquest (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kpatience (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kreversi (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kshisen (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-ksirk (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-ksnakeduel (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kspaceduel (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-ksquares (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-ksudoku (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-ktuberling (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-kubrick (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:21] [PACMAN] upgraded kdegames-lskat (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegames-palapeli (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegames-picmi (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded libkipi (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-gwenview (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-kamera (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-kcolorchooser (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-kgamma (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-kolourpaint (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-kruler (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded libksane (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-ksaneplugin (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-ksnapshot (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-mobipocket (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-okular (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-strigi-analyzer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-svgpart (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded libkdcraw (4.10.1-2 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdegraphics-thumbnailers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded libkcddb (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded libkcompactdisc (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-audiocd-kio (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-dragonplayer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-juk (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-kmix (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-kscd (4.10.1-2 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-filesharing (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-kdnssd (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-kget (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-kopete (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-kppp (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-krdc (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdenetwork-krfb (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-libkdepim (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-akonadiconsole (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-akregator (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-blogilo (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-console (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kaddressbook (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kalarm (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kjots (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kleopatra (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kmail (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-knode (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-knotes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kontact (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-korganizer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-kresources (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-ktimetracker (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdepim-ktnef (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-bball (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-binary-clock (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-blackboard (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-bookmarks (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-bubblemon (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-calculator (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-charselect (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-libs (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-comic (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-community (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-dict (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:22] [PACMAN] upgraded kdeplasma-addons-applets-eyes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-fifteenpuzzle (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-filewatcher (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-frame (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-fuzzy-clock (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-icontasks (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-incomingmsg (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-kdeobservatory (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-kimpanel (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-knowledgebase (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-kolourpicker (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-konqprofiles (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-konsoleprofiles (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-lancelot (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-leavenote (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-life (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-luna (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-magnifique (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-mediaplayer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-microblog (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-news (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-notes (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-nowplaying (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-paste (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-pastebin (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-plasmaboard (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-previewer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-qalculate (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-rememberthemilk (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-rssnow (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-showdashboard (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-showdesktop (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-social-news (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-spellcheck (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-systemloadviewer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-timer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-unitconverter (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-weather (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-weatherstation (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-applets-webslice (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-containments (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-audioplayercontrol (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-browserhistory (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-characters (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-contacts (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-converter (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-datetime (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-dictionary (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-events (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-kate (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-katesessions (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-konquerorsessions (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-konsolesessions (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-kopete (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-mediawiki (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-spellchecker (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-runners-youtube (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-mandelbrot (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-marble (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-pattern (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-potd (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-qmlwallpapers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-virus (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeplasma-addons-wallpapers-weather (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-cervisia (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-dev-scripts (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-dev-utils (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-dolphin-plugins (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-kapptemplate (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-kcachegrind (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-kioslaves (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-kompare (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-strigi-analyzers (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-lokalize (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-okteta (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-poxml (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdesdk-umbrello (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdetoys-amor (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdetoys-kteatime (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdetoys-ktux (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-ark (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-filelight (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kcalc (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kcharselect (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kdf (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kfloppy (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kgpg (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kremotecontrol (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-ktimer (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-kwallet (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-print-manager (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-superkaramba (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdeutils-sweeper (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdewebdev-kfilereplace (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdewebdev-kimagemapeditor (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdewebdev-klinkstatus (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded kdewebdev-kommander (4.10.1-1 -> 4.10.2-1)
    [2013-04-06 04:23] [PACMAN] upgraded lib32-glibc (2.17-2 -> 2.17-4)
    [2013-04-06 04:23] [PACMAN] upgraded lib32-gcc-libs (4.7.2-4 -> 4.8.0-1)
    [2013-04-06 04:23] [PACMAN] upgraded libkolabxml (0.8.3-1 -> 0.8.3-2)
    [2013-04-06 04:23] [PACMAN] upgraded libltdl (2.4.2-7 -> 2.4.2-8)
    [2013-04-06 04:23] [PACMAN] upgraded libtool (2.4.2-7 -> 2.4.2-8)
    [2013-04-06 04:23] [PACMAN] upgraded libtorrent-rasterbar (1:0.16.9-1 -> 1:0.16.9-2)
    [2013-04-06 04:23] [PACMAN] upgraded libxi (1.7-1 -> 1.7.1-1)
    [2013-04-06 04:23] [PACMAN] upgraded libzip (0.10.1-1 -> 0.11-1)
    [2013-04-06 04:24] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-04-06 04:24] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Building image from preset: 'default'
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Starting build: 3.8.5-1-ARCH
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Building image from preset: 'fallback'
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Starting build: 3.8.5-1-ARCH
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-04-06 04:24] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-04-06 04:24] [PACMAN] upgraded linux (3.8.4-1 -> 3.8.5-1)
    [2013-04-06 04:24] [PACMAN] upgraded linux-headers (3.8.4-1 -> 3.8.5-1)
    [2013-04-06 04:24] [PACMAN] upgraded lirc-utils (1:0.9.0-39 -> 1:0.9.0-40)
    [2013-04-06 04:24] [PACMAN] upgraded mpg123 (1.15.1-1 -> 1.15.3-1)
    Last edited by flash84 (2013-04-07 12:13:23)

    Trying to install the xf86-video-ati
    sudo pacman -S xf86-video-ati
    [sudo] password for xxx:
    Löse Abhängigkeiten auf...
    Suche nach Zwischenkonflikten...
    :: mesa-libgl und catalyst-utils stehen miteinander in Konflikt (libgl). catalyst-utils entfernen? [j/N] j
    Fehler: Konnte den Vorgang nicht vorbereiten (Kann Abhängigkeiten nicht erfüllen)
    :: lib32-catalyst-utils: benötigt catalyst-utils
    It's german, but it basically says that there are open dependencies.
    So trying to delete lib32-catalyst-utils states same message with other packages.
    So i try to recursively remove the packages dependent on catalyst-utils
    sudo pacman -Rnsc catalyst-utils
    Prüfe Abhängigkeiten...
    :: avahi benötigt optional gtk2: gtk2 bindings
    :: avahi benötigt optional qt4: qt4 bindings
    :: avahi benötigt optional pygtk: avahi-bookmarks, avahi-discover
    :: avahi benötigt optional python2-dbus: avahi-discover
    :: cronie benötigt optional pm-utils: defer anacron on battery power
    :: deluge benötigt optional pygtk: needed for gtk ui
    :: deluge benötigt optional python2-mako: needed for web ui
    :: gnupg benötigt optional libusb-compat: scdaemon
    :: iputils benötigt optional xinetd: for tftpd
    :: libtiff benötigt optional freeglut: for using tiffgt
    :: ntp benötigt optional libedit: ntpdc, ntpq
    :: pinentry benötigt optional gtk2: for gtk2 backend
    :: pinentry benötigt optional qt4: for qt4 backend
    :: systemd benötigt optional python: systemd library bindings
    :: twisted benötigt optional pygtk: for using manhole
    :: xdg-utils benötigt optional kdebase-runtime: for KDE support in xdg-open
    :: xdg-utils benötigt optional xorg-xprop: for Xfce support in xdg-open
    Pakete (614): a52dec-0.7.4-6 aalib-1.4rc5-9 akonadi-1.9.1-3 antlr2-2.7.7-3 aspell-0.60.6.1-1 atk-2.6.0-1 attica-0.4.1-2
    avogadro-1.1.0-4 bc-1.06-8 blas-3.4.2-1 ca-certificates-java-20121112+nmu2-1 cabextract-1.4-2 cairo-1.12.14-3
    ccrtp-2.0.3-2 cdparanoia-10.2-4 cfitsio-3.340-1 chemical-mime-data-0.1.94-6 chmlib-0.40-3 cln-1.3.2-1
    colord-0.1.31-1 compositeproto-0.4.2-2 convertlit-1.8-6 cups-1.6.2-1 cups-filters-1.0.33-1 dbus-glib-0.100.2-1
    dconf-0.14.1-1 djvulibre-3.5.25.3-1 dnssec-anchors-20130320-1 docbook-xml-4.5-5 docbook-xsl-1.78.0-1 dotconf-1.3-3
    ebook-tools-0.2.2-1 eclipse-4.2.2-1 eigen2-2.0.17-1 enca-1.14-1 enchant-1.6.0-4 exiv2-0.23-1 faac-1.28-4
    faad2-2.7-3 facile-1.1-15 farstream-0.2.2-1 ffmpeg-1:1.2-2 firefox-20.0-1 firefox-i18n-de-20.0-1 fontsproto-2.1.2-1
    freeglut-2.8.0-2 fribidi-0.19.5-1 gd-2.0.36RC1-5 gdk-pixbuf2-2.26.5-2 geoclue-0.12.99-1 ghostscript-9.07-1
    giflib-4.1.6-5 glew-1.9.0-2 glib-networking-2.34.2-1 glu-9.0.0-2 gnome-mime-data-2.18.0-6 gnugo-3.8-3
    gobject-introspection-1.34.2-1 gpm-1.20.7-1 grantlee-0.3.0-2 graphite-1:1.2.1-1 gsettings-desktop-schemas-3.6.1-1
    gsl-1.15-2 gsm-1.0.13-7 gst-plugins-base-libs-1.0.6-1 gstreamer-1.0.6-1 gstreamer0.10-0.10.36-1
    gstreamer0.10-base-0.10.36-1 gtk-update-icon-cache-2.24.17-1 gtk2-2.24.17-1 harfbuzz-0.9.15-1 hspell-1.2-1
    hunspell-1.3.2-2 ilmbase-1.0.3-1 imlib2-1.4.5-2 iso-codes-3.41-1 jack-0.121.3-7 jasper-1.900.1-8
    jdk7-openjdk-7.u17_2.3.8-1 jre7-openjdk-7.u17_2.3.8-1 jre7-openjdk-headless-7.u17_2.3.8-1 js-1.8.5-3 json-c-0.10-2
    kactivities-4.10.2-1 kde-agent-20130226-1 kde-base-artwork-4.10.2-1 kde-meta-kdeaccessibility-4.10-2
    kde-meta-kdeadmin-4.10-2 kde-meta-kdeartwork-4.10-2 kde-meta-kdebase-4.10-2 kde-meta-kdeedu-4.10-2
    kde-meta-kdegames-4.10-2 kde-meta-kdegraphics-4.10-2 kde-meta-kdemultimedia-4.10-2 kde-meta-kdenetwork-4.10-2
    kde-meta-kdepim-4.10-2 kde-meta-kdeplasma-addons-4.10-2 kde-meta-kdesdk-4.10-2 kde-meta-kdetoys-4.10-2
    kde-meta-kdeutils-4.10-2 kde-meta-kdewebdev-4.10-2 kdeaccessibility-jovie-4.10.2-1
    kdeaccessibility-kaccessible-4.10.2-1 kdeaccessibility-kmag-4.10.2-1 kdeaccessibility-kmousetool-4.10.2-1
    kdeaccessibility-kmouth-4.10.2-1 kdeadmin-kcron-4.10.2-1 kdeadmin-ksystemlog-4.10.2-1 kdeadmin-kuser-4.10.2-1
    kdeartwork-colorschemes-4.10.2-1 kdeartwork-desktopthemes-4.10.2-1 kdeartwork-emoticons-4.10.2-1
    kdeartwork-iconthemes-4.10.2-1 kdeartwork-kscreensaver-4.10.2-1 kdeartwork-sounds-4.10.2-1 kdeartwork-styles-4.10.2-1
    kdeartwork-wallpapers-4.10.2-1 kdeartwork-weatherwallpapers-4.10.2-1 kdebase-dolphin-4.10.2-1
    kdebase-katepart-4.10.2-1 kdebase-kdepasswd-4.10.2-1 kdebase-kdialog-4.10.2-1 kdebase-keditbookmarks-4.10.2-1
    kdebase-kfind-4.10.2-1 kdebase-konq-plugins-4.10.2-1 kdebase-konqueror-4.10.2-1 kdebase-konsole-4.10.2-1
    kdebase-kwrite-4.10.2-1 kdebase-lib-4.10.2-1 kdebase-plasma-4.10.2-1 kdebase-runtime-4.10.2-2
    kdebase-workspace-4.10.2-1 kdebindings-python-common-4.10.2-1 kdebindings-python2-4.10.2-1 kdeedu-analitza-4.10.2-1
    kdeedu-blinken-4.10.2-1 kdeedu-cantor-4.10.2-1 kdeedu-kalgebra-4.10.2-1 kdeedu-kalzium-4.10.2-1
    kdeedu-kanagram-4.10.2-1 kdeedu-kbruch-4.10.2-1 kdeedu-kgeography-4.10.2-1 kdeedu-khangman-4.10.2-1
    kdeedu-kig-4.10.2-1 kdeedu-kiten-4.10.2-1 kdeedu-klettres-4.10.2-1 kdeedu-kmplot-4.10.2-1 kdeedu-kstars-4.10.2-1
    kdeedu-ktouch-4.10.2-1 kdeedu-kturtle-4.10.2-1 kdeedu-kwordquiz-4.10.2-1 kdeedu-marble-4.10.2-1 kdeedu-pairs-4.10.2-1
    kdeedu-parley-4.10.2-1 kdeedu-rocs-4.10.2-1 kdeedu-step-4.10.2-1 kdegames-bomber-4.10.2-1 kdegames-bovo-4.10.2-1
    kdegames-granatier-4.10.2-1 kdegames-kajongg-4.10.2-1 kdegames-kapman-4.10.2-1 kdegames-katomic-4.10.2-1
    kdegames-kblackbox-4.10.2-1 kdegames-kblocks-4.10.2-1 kdegames-kbounce-4.10.2-1 kdegames-kbreakout-4.10.2-1
    kdegames-kdiamond-4.10.2-1 kdegames-kfourinline-4.10.2-1 kdegames-kgoldrunner-4.10.2-1 kdegames-kigo-4.10.2-1
    kdegames-killbots-4.10.2-1 kdegames-kiriki-4.10.2-1 kdegames-kjumpingcube-4.10.2-1 kdegames-klickety-4.10.2-1
    kdegames-klines-4.10.2-1 kdegames-kmahjongg-4.10.2-1 kdegames-kmines-4.10.2-1 kdegames-knavalbattle-4.10.2-1
    kdegames-knetwalk-4.10.2-1 kdegames-kolf-4.10.2-1 kdegames-kollision-4.10.2-1 kdegames-konquest-4.10.2-1
    kdegames-kpatience-4.10.2-1 kdegames-kreversi-4.10.2-1 kdegames-kshisen-4.10.2-1 kdegames-ksirk-4.10.2-1
    kdegames-ksnakeduel-4.10.2-1 kdegames-kspaceduel-4.10.2-1 kdegames-ksquares-4.10.2-1 kdegames-ksudoku-4.10.2-1
    kdegames-ktuberling-4.10.2-1 kdegames-kubrick-4.10.2-1 kdegames-lskat-4.10.2-1 kdegames-palapeli-4.10.2-1
    kdegames-picmi-4.10.2-1 kdegraphics-gwenview-4.10.2-1 kdegraphics-kamera-4.10.2-1 kdegraphics-kcolorchooser-4.10.2-1
    kdegraphics-kgamma-4.10.2-1 kdegraphics-kolourpaint-4.10.2-1 kdegraphics-kruler-4.10.2-1
    kdegraphics-ksaneplugin-4.10.2-1 kdegraphics-ksnapshot-4.10.2-1 kdegraphics-mobipocket-4.10.2-1
    kdegraphics-okular-4.10.2-1 kdegraphics-strigi-analyzer-4.10.2-1 kdegraphics-svgpart-4.10.2-1
    kdegraphics-thumbnailers-4.10.2-1 kdelibs-4.10.2-1 kdemultimedia-audiocd-kio-4.10.2-1
    kdemultimedia-dragonplayer-4.10.2-1 kdemultimedia-ffmpegthumbs-4.10.2-1 kdemultimedia-juk-4.10.2-1
    kdemultimedia-kmix-4.10.2-1 kdemultimedia-kscd-4.10.2-1 kdemultimedia-mplayerthumbs-4.10.2-1
    kdenetwork-filesharing-4.10.2-1 kdenetwork-kdnssd-4.10.2-1 kdenetwork-kget-4.10.2-1 kdenetwork-kopete-4.10.2-1
    kdenetwork-kppp-4.10.2-1 kdenetwork-krdc-4.10.2-1 kdenetwork-krfb-4.10.2-1 kdepim-akonadiconsole-4.10.2-2
    kdepim-akregator-4.10.2-2 kdepim-blogilo-4.10.2-2 kdepim-console-4.10.2-2 kdepim-kaddressbook-4.10.2-2
    kdepim-kalarm-4.10.2-2 kdepim-kjots-4.10.2-2 kdepim-kleopatra-4.10.2-2 kdepim-kmail-4.10.2-2 kdepim-knode-4.10.2-2
    kdepim-knotes-4.10.2-2 kdepim-kontact-4.10.2-2 kdepim-korganizer-4.10.2-2 kdepim-kresources-4.10.2-2
    kdepim-ktimetracker-4.10.2-2 kdepim-ktnef-4.10.2-2 kdepim-libkdepim-4.10.2-2 kdepim-runtime-4.10.2-1
    kdepimlibs-4.10.2-1 kdeplasma-addons-applets-bball-4.10.2-1 kdeplasma-addons-applets-binary-clock-4.10.2-1
    kdeplasma-addons-applets-blackboard-4.10.2-1 kdeplasma-addons-applets-bookmarks-4.10.2-1
    kdeplasma-addons-applets-bubblemon-4.10.2-1 kdeplasma-addons-applets-calculator-4.10.2-1
    kdeplasma-addons-applets-charselect-4.10.2-1 kdeplasma-addons-applets-comic-4.10.2-1
    kdeplasma-addons-applets-community-4.10.2-1 kdeplasma-addons-applets-dict-4.10.2-1
    kdeplasma-addons-applets-eyes-4.10.2-1 kdeplasma-addons-applets-fifteenpuzzle-4.10.2-1
    kdeplasma-addons-applets-filewatcher-4.10.2-1 kdeplasma-addons-applets-frame-4.10.2-1
    kdeplasma-addons-applets-fuzzy-clock-4.10.2-1 kdeplasma-addons-applets-icontasks-4.10.2-1
    kdeplasma-addons-applets-incomingmsg-4.10.2-1 kdeplasma-addons-applets-kdeobservatory-4.10.2-1
    kdeplasma-addons-applets-kimpanel-4.10.2-1 kdeplasma-addons-applets-knowledgebase-4.10.2-1
    kdeplasma-addons-applets-kolourpicker-4.10.2-1 kdeplasma-addons-applets-konqprofiles-4.10.2-1
    kdeplasma-addons-applets-konsoleprofiles-4.10.2-1 kdeplasma-addons-applets-lancelot-4.10.2-1
    kdeplasma-addons-applets-leavenote-4.10.2-1 kdeplasma-addons-applets-life-4.10.2-1
    kdeplasma-addons-applets-luna-4.10.2-1 kdeplasma-addons-applets-magnifique-4.10.2-1
    kdeplasma-addons-applets-mediaplayer-4.10.2-1 kdeplasma-addons-applets-microblog-4.10.2-1
    kdeplasma-addons-applets-news-4.10.2-1 kdeplasma-addons-applets-notes-4.10.2-1
    kdeplasma-addons-applets-nowplaying-4.10.2-1 kdeplasma-addons-applets-paste-4.10.2-1
    kdeplasma-addons-applets-pastebin-4.10.2-1 kdeplasma-addons-applets-plasmaboard-4.10.2-1
    kdeplasma-addons-applets-previewer-4.10.2-1 kdeplasma-addons-applets-qalculate-4.10.2-1
    kdeplasma-addons-applets-rememberthemilk-4.10.2-1 kdeplasma-addons-applets-rssnow-4.10.2-1
    kdeplasma-addons-applets-showdashboard-4.10.2-1 kdeplasma-addons-applets-showdesktop-4.10.2-1
    kdeplasma-addons-applets-social-news-4.10.2-1 kdeplasma-addons-applets-spellcheck-4.10.2-1
    kdeplasma-addons-applets-systemloadviewer-4.10.2-1 kdeplasma-addons-applets-timer-4.10.2-1
    kdeplasma-addons-applets-unitconverter-4.10.2-1 kdeplasma-addons-applets-weather-4.10.2-1
    kdeplasma-addons-applets-weatherstation-4.10.2-1 kdeplasma-addons-applets-webslice-4.10.2-1
    kdeplasma-addons-containments-4.10.2-1 kdeplasma-addons-libs-4.10.2-1
    kdeplasma-addons-runners-audioplayercontrol-4.10.2-1 kdeplasma-addons-runners-browserhistory-4.10.2-1
    kdeplasma-addons-runners-characters-4.10.2-1 kdeplasma-addons-runners-contacts-4.10.2-1
    kdeplasma-addons-runners-converter-4.10.2-1 kdeplasma-addons-runners-datetime-4.10.2-1
    kdeplasma-addons-runners-dictionary-4.10.2-1 kdeplasma-addons-runners-events-4.10.2-1
    kdeplasma-addons-runners-katesessions-4.10.2-1 kdeplasma-addons-runners-konquerorsessions-4.10.2-1
    kdeplasma-addons-runners-konsolesessions-4.10.2-1 kdeplasma-addons-runners-kopete-4.10.2-1
    kdeplasma-addons-runners-mediawiki-4.10.2-1 kdeplasma-addons-runners-spellchecker-4.10.2-1
    kdeplasma-addons-runners-youtube-4.10.2-1 kdeplasma-addons-wallpapers-mandelbrot-4.10.2-1
    kdeplasma-addons-wallpapers-marble-4.10.2-1 kdeplasma-addons-wallpapers-pattern-4.10.2-1
    kdeplasma-addons-wallpapers-potd-4.10.2-1 kdeplasma-addons-wallpapers-qmlwallpapers-4.10.2-1
    kdeplasma-addons-wallpapers-virus-4.10.2-1 kdeplasma-addons-wallpapers-weather-4.10.2-1 kdesdk-cervisia-4.10.2-1
    kdesdk-dev-scripts-4.10.2-1 kdesdk-dev-utils-4.10.2-1 kdesdk-dolphin-plugins-4.10.2-1 kdesdk-kapptemplate-4.10.2-1
    kdesdk-kate-4.10.2-1 kdesdk-kcachegrind-4.10.2-1 kdesdk-kioslaves-4.10.2-1 kdesdk-kompare-4.10.2-1
    kdesdk-lokalize-4.10.2-1 kdesdk-okteta-4.10.2-1 kdesdk-poxml-4.10.2-1 kdesdk-strigi-analyzers-4.10.2-1
    kdesdk-umbrello-4.10.2-1 kdetoys-amor-4.10.2-1 kdetoys-kteatime-4.10.2-1 kdetoys-ktux-4.10.2-1 kdeutils-ark-4.10.2-1
    kdeutils-filelight-4.10.2-1 kdeutils-kcalc-4.10.2-1 kdeutils-kcharselect-4.10.2-1 kdeutils-kdf-4.10.2-1
    kdeutils-kfloppy-4.10.2-1 kdeutils-kgpg-4.10.2-1 kdeutils-kremotecontrol-4.10.2-1 kdeutils-ktimer-4.10.2-1
    kdeutils-kwallet-4.10.2-1 kdeutils-print-manager-4.10.2-1 kdeutils-superkaramba-4.10.2-1 kdeutils-sweeper-4.10.2-1
    kdewebdev-kfilereplace-4.10.2-1 kdewebdev-kimagemapeditor-4.10.2-1 kdewebdev-klinkstatus-4.10.2-1
    kdewebdev-kommander-4.10.2-1 kpartsplugin-20120723-1 lame-3.99.5-1 lapack-3.4.2-1 lcms-1.19-2 lcms2-2.4-1
    ldns-1.6.16-1 lib32-acl-2.2.51-2 lib32-attr-2.4.46-2 lib32-bzip2-1.0.6-1 lib32-catalyst-utils-13.3-4
    lib32-expat-2.1.0-1 lib32-fontconfig-2.10.2-1 lib32-freetype2-2.4.11-1 lib32-gcc-libs-4.8.0-1
    lib32-gettext-0.18.2.1-1 lib32-glibc-2.17-4 lib32-glu-9.0.0-1 lib32-libdrm-2.4.43-1 lib32-libice-1.0.8-1
    lib32-libpciaccess-0.13.1-1 lib32-libsm-1.2.1-1 lib32-libx11-1.5.0-1 lib32-libxau-1.0.7-1 lib32-libxcb-1.9-2
    lib32-libxcursor-1.1.13-1 lib32-libxdamage-1.1.4-1 lib32-libxdmcp-1.1.1-1 lib32-libxext-1.3.1-1 lib32-libxfixes-5.0-1
    lib32-libxi-1.7-1 lib32-libxrandr-1.4.0-1 lib32-libxrender-0.9.7-1 lib32-util-linux-2.22.2-1 lib32-zlib-1.2.7-1
    libass-0.10.1-1 libasyncns-0.8-4 libatasmart-0.19-1 libbluray-0.2.3-1 libcaca-0.99.beta18-1 libcanberra-0.30-3
    libcddb-1.3.2-3 libcdio-0.90-2 libcdio-paranoia-10.2+0.90-1 libdatrie-0.2.5-1 libdbusmenu-qt-0.9.2-2 libdca-0.0.5-3
    libdiscid-0.4.1-1 libdmtx-0.7.4-3 libdvbpsi-0.2.2-1 libdvdnav-4.2.0-2 libdvdread-4.2.0-1 libebml-1.3.0-1
    libedit-20120601_3.0-1 libevent-2.0.21-2 libexif-0.6.21-1 libftdi-0.20-1 libgadu-1.11.2-1 libglade-2.6.4-3
    libgphoto2-2.5.1-1 libgusb-0.1.4-1 libical-0.48-1 libid3tag-0.15.1b-7 libidn-1.26-1 libieee1284-0.2.11-4
    libimobiledevice-1.1.4-2 libindi-0.9.6-1 libiodbc-3.52.8-1 libirman-0.4.5-3 libkate-0.4.1-3 libkcddb-4.10.2-1
    libkcompactdisc-4.10.2-1 libkdcraw-4.10.2-1 libkdeedu-4.10.2-1 libkdegames-4.10.2-1 libkexiv2-4.10.2-1
    libkgapi-0.4.4-1 libkipi-4.10.2-1 libkmahjongg-4.10.2-1 libkolab-0.4.1-1 libkolabxml-0.8.3-2 libksane-4.10.2-1
    libktorrent-1.3.1-1 libmad-0.15.1b-6 libmatroska-1.4.0-1 libmms-0.6.2-1 libmng-1.0.10-4 libmodplug-0.8.8.4-1
    libmp4v2-2.0.0-2 libmpcdec-1.2.6-3 libmpeg2-0.5.1-4 libmsn-4.2.1-1 libmusicbrainz3-3.0.3-2 libmusicbrainz5-5.0.1-1
    libmysqlclient-5.5.30-7 libnice-0.1.3-1 libnotify-0.7.5-1 libnova-0.14.0-1 libotr3-3.2.1-1 libplist-1.8-2
    libproxy-0.4.11-1 libpulse-3.0-3 libqalculate-0.9.7-3 libqzeitgeist-0.8.0-3 libraw1394-2.1.0-1 libshout-1:2.3.1-1
    libsoup-2.40.3-1 libspectre-0.2.7-1 libsrtp-1.4.4-2 libssh-0.5.4-1 libthai-0.1.18-1 libtheora-1.1.1-2
    libtiger-0.3.4-3 libupnp-1.6.18-1 libusb-compat-0.1.4-2 libva-1.1.1-1 libvncserver-0.9.9-1 libvpx-1.1.0-1
    libxcomposite-0.4.4-1 libxfont-1.4.5-1 libxklavier-5.3-1 libxml2-2.8.0-1 libxres-1.0.6-1 libxslt-1.1.26-3
    libxvmc-1.0.7-1 libxxf86dga-1.1.3-1 libzip-0.11-1 libzrtpcpp-2.1.2-1 lirc-utils-1:0.9.0-41 lm_sensors-3.3.3-2
    lua51-5.1.5-3 luckybackup-0.4.7-3 media-player-info-17-1 mediastreamer-2.8.2-4 mesa-demos-8.1.0-1 mime-types-8-1
    mozilla-common-1.4-3 mpg123-1.15.3-1 mplayer-35920-1 mysql-5.5.30-7 mysql-clients-5.5.30-7 neon-0.29.6-4
    nepomuk-core-4.10.2-1 nepomuk-widgets-4.10.2-1 net-snmp-5.7.2-3 netkit-bsd-finger-0.17-7 nspr-4.9.6-1 nss-3.14.3-2
    ocaml-4.00.1-3 openal-1.15.1-1 openbabel-2.3.2-1 opencore-amr-0.1.3-1 openexr-1.7.1-2 openjpeg-1.5.0-1
    openssh-6.2p1-1 opus-1.0.2-1 orc-0.4.17-1 ortp-0.20.0.20120701-1 oxygen-icons-4.10.2-1 pango-1.32.5-1
    phonon-1:4.6.0-8 phonon-vlc-0.6.2-1 pixman-0.28.2-1 pm-quirks-0.20100619-3 pm-utils-1.4.1-5 polkit-0.110-1
    polkit-kde-0.99.0-2 polkit-qt-0.103.0-2 poppler-0.22.2-1 poppler-qt-0.22.2-1 prison-1.0-2 pygobject-devel-3.4.2-1
    pygobject2-devel-2.28.6-8 pygtk-2.24.0-3 pyqt-common-4.10-1 python-3.3.1-1 python-cairo-1.10.0-2
    python-dbus-common-1.1.1-2 python-gobject-3.4.2-1 python-xdg-0.25-1 python2-beaker-1.6.4-1 python2-cairo-1.10.0-1
    python2-dbus-1.1.1-2 python2-gobject2-2.28.6-8 python2-mako-0.7.3-1 python2-markupsafe-0.15-2 python2-notify-0.1.1-12
    python2-numpy-1.7.0-2 python2-pyqt-4.10-1 python2-sip-4.14.5-1 qca-2.0.3-4 qca-ossl-2.0.0-6 qimageblitz-0.0.6-3
    qjson-0.8.1-2 qoauth-1.0.1-4 qpdf-4.0.1-1 qrencode-3.4.2-1 qscintilla-2.7.1-1 qt4-4.8.4-16 qtwebkit-2.3.0-1
    qwt-6.0.2-2 raptor-2.0.9-2 rasqal-1:0.9.30-1 recode-3.6-7 redland-1:1.0.16-2 redland-storage-virtuoso-1:1.0.16-2
    rsync-3.0.9-5 rtmpdump-20121203-1 sane-1.0.23-4 schroedinger-1.0.11-1 sdl-1.2.15-3 sdl_image-1.2.12-2 serf-1.2.0-1
    shared-color-profiles-0.1.5-1 shared-desktop-ontologies-0.10.0-1 shared-mime-info-1.1-1 sip-4.14.5-1 soprano-2.9.0-2
    sound-theme-freedesktop-0.8-1 speech-dispatcher-0.8-1 speex-1.2rc1-3 startup-notification-0.12-3 strigi-0.7.8-2
    subversion-1.7.9-1 taglib-1.8-1 telepathy-farstream-0.6.0-1 telepathy-glib-0.20.1-1 telepathy-qt-0.9.3-7
    tidyhtml-1.46-2 ucommon-5.5.0-1 udisks2-2.0.1-1 unzip-6.0-6 upower-0.9.20-1 usbmuxd-1.0.8-1 v4l-utils-0.9.3-2
    virtuoso-base-6.1.6-1 vlc-2.0.6-1 wcslib-4.16-1 webkitgtk2-1.10.2-3 wine-1.5.27-1 wine_gecko-1.9-1
    winetricks-20120912-1 x264-20130206-1 xcb-util-image-0.3.9-1 xcb-util-keysyms-0.3.9-1 xcb-util-renderutil-0.3.8-1
    xerces-c-3.1.1-3 xf86-input-evdev-2.7.3-2 xf86dgaproto-2.1-2 xinetd-2.3.15-2 xkeyboard-config-2.8-1
    xorg-bdftopcf-1.0.4-1 xorg-font-util-1.3.0-1 xorg-font-utils-7.6-3 xorg-fonts-alias-1.0.2-2 xorg-fonts-misc-1.0.1-2
    xorg-server-1.13.3-1 xorg-server-common-1.13.3-1 xorg-setxkbmap-1.3.0-1 xorg-xkbcomp-1.2.4-1 xorg-xmessage-1.0.4-1
    xorg-xprop-1.2.1-1 xvidcore-1.3.2-1 zvbi-0.2.33-4 catalyst-utils-13.3-4
    Gesamtgröße der entfernten Pakete: -870,59 MiB
    :: Möchten Sie diese Pakete entfernen? [J/n]

  • Best place to specify module load

    Hi all, I am having problems lately with the network modules. I have an nforce2 board with integrated network hardware and a realtek network card, and now and then the integrated interface stops working, so I have switched to the external to avoid the nuissance.
    But it raises a question that has been looming for a time (with all these changes in initrd, etc.): What is the best or appropriate place for specifying module load? /etc/rc.conf, /etc/mkinitrd.conf, /etc/modprobe.conf?

    The recommended way to load modules is to make sure /etc/rc.conf has
    MOD_AUTOLOAD="yes"
    so that the modules required by your system are detected and loaded automatically. If you have some unusual hardware that escapes autodetection, or some undetected modules that require boot-time loading, they should be listed in rc.conf MODULES.
    mkinitrd.conf is used to specify  the modules required to allow your system to boot, and modprobe.conf allows you to fine-tune module loading by setting aliases, module options, or additional install commands.

  • Module Interface Problems

    I'm having a problem passing variables from one module to
    another via an interface.
    I have an application that calls a module when it enters a
    specific state, which works fine. The module is loaded through
    <mx:ModuleLoader id="modMyModule1" url="myModule1.swf"> and
    it works as expected.
    Within this module, I have a button that when pressed, calls
    a second module via a module loader, using an interface. I need an
    interface, as there is a variable that I need to pass between these
    two modules. Clicking the button runs a couple of functions, ending
    with:
    currentState='Results';
    modMyModule2.url='myResults.swf";
    and the states look like:
    <mx:states>
    <mx:State name="Results">
    <mx:AddChild>
    <mx:ModuleLoader id="modMyModule2"
    ready="readyModule(event)" error="modErrorHandler(event)" />
    </mx:AddChild>
    </mx:State>
    </mx:states>
    So when the module is ready, the following code is invoked in
    modMyModule1:
    private function readyModule(evt:ModuleEvent):void
    var ichild:* = modMyModule2.child as IResults;
    if(ichild != null) { ichild.searchResults =
    arrSearchResults; trace("NOT NULL"); }
    else { trace("NULL!"); }
    modMyModule2 contains 'implements="IResults"' in it's root
    module tag, and IResults is defined as follows:
    package
    import flash.events.IEventDispatcher;
    import mx.collections.ArrayCollection;
    public interface IResults extends IEventDispatcher
    function set searchResults(arrResults:ArrayCollection):void;
    function get searchResults():ArrayCollection;
    I have corresponding getter and setter functions in my
    modMyModule2, but they never seem to get called! For some reason,
    the interface is always failing, and therefore in my readyModule()
    function in the first module, it always traces "NULL".
    I can access the required variable in the second module via
    parentApplication.modMyModule1.child.arrSearchResults, but I'd
    prefer to do it via the interface.
    I've gone through all the docs, but I can't see what I've
    done that's different from anything in them, except for the fact
    that I'm calling a module from a module via an interface.
    Can anyone shed some light on this at all?
    Cheers,
    K.

    I don't have a solution to your problem, but I can point you
    somewhere. The documentation team has released the module
    documentation, but I think it is only currently available at their
    blog (as the documentation will be released later).
    http://blogs.adobe.com/flexdoc/
    It should be the first entry of the blog. I noticed that one
    of the data points mentioned inter-module communication, -
    hopefully that is what you are looking for.
    Good Luck,
    Andy

  • Systemd system-modules-load error [Solved]

    After recent update of kernel too linux-3.14.4-1I now cannot boot system due too this error
    -- Logs begin at Fri 2014-05-16 11:58:04 BST, end at Fri 2014-05-16 12:00:56 BST. --
    May 16 11:59:33 arch systemd[1]: Starting Graphical Interface.
    -- Subject: Unit graphical.target has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit graphical.target has begun starting up.
    May 16 11:59:33 arch systemd[1]: Reached target Graphical Interface.
    -- Subject: Unit graphical.target has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit graphical.target has finished starting up.
    -- The start-up result is done.
    May 16 11:59:33 arch systemd[1]: Starting Network.
    -- Subject: Unit network.target has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit network.target has begun starting up.
    May 16 11:59:33 arch systemd[1]: Reached target Network.
    -- Subject: Unit network.target has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit network.target has finished starting up.
    -- The start-up result is done.
    May 16 11:59:33 arch systemd[1]: Startup finished in 4.181s (kernel) + 1min 31.543s (userspace) = 1min 35.724s.
    -- Subject: System start-up is now complete
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- All system services necessary queued for starting at boot have been
    -- successfully started. Note that this does not mean that the machine is
    -- now idle as services might still be busy with completing start-up.
    -- Kernel start-up required 4181476 microseconds.
    -- Initial RAM disk start-up required INITRD_USEC microseconds.
    -- Userspace start-up required 91543070 microseconds.
    May 16 12:00:56 arch systemd[1]: Starting Load Kernel Modules...
    -- Subject: Unit systemd-modules-load.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-modules-load.service has begun starting up.
    May 16 12:00:56 arch systemd-modules-load[316]: Failed to lookup alias 'sg': Function not implemented
    May 16 12:00:56 arch systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
    May 16 12:00:56 arch systemd[1]: Failed to start Load Kernel Modules.
    -- Subject: Unit systemd-modules-load.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-modules-load.service has failed.
    -- The result is failed.
    May 16 12:00:56 arch systemd[1]: Unit systemd-modules-load.service entered failed state.
    Might be just that naming of sg has changed have updated and tried to run mkinicpio but it still does not find module?
    Solved put it down to a bad dd clone of drive partition, have rerun and all seems to working now.
    Last edited by Mr Green (2014-05-17 12:20:52)

    Yep. It was my own fault. I had been using the b43 driver for my BCM4331 wifi card, and recently switched to broadcom-wl. However, I still was trying to load b43 in /etc/modules-load even though I had removed the driver and module from my system. Not sure why my system only started complaining in 3.18.5, but in any case removing the offending .conf file solved the problem. Thanks, graysky.

Maybe you are looking for