Snow not Bridging Properly or Routing Problem?

Hi All, I have a network consisting of Snow and Netgear Base-stations both configured as Bridges (i.e., no NAT/DHCP) connecting back to a Netgear RP114 router out to a cable modem.
The Snow defines a network called "vegetables" and the Netgear a network called "fastVegetables", operating on different, correctly spaced, channels.
I can connect to either wireless network with my laptop and thence out to the internet via the router and cable modem - this all works fine.
I also have a Cannon IP4000r wireless printer that is connected to the "vegetables" wireless network (Snow). If my laptop is connected to the same wireless network I can see the printer and print quite happily to it. I can also see (both ping and connect to web servers on) the Netgear router and the Netgear access point.
Now the problem - if I connect my laptop to the other wireless network ("fastVegetables") operated by the Netgear access point I cannot see the printer at all - neither ping nor print nor access its config web server.
I can ping the Snow and connect to it using the Airport Admin utility; the printer gets it ip address from the Netgear router using DHCP - so the router should know of its existence.
So what I cannot figure out is whether the traffic for the printer isn't even reaching the Snow to be bridged to the "vegetables" wireless network segment; or whether it is reaching the Snow but for some reason isn't being bridged from the lan side to the wireless side?
Has anyone experience of this or similar setup and whether the Snow has any Bridging problems?
Regards...jeremy

Great to hear. Please flag your last post as '''Solved Problem''' so
that others will know what to do.
Happy Computing.

Similar Messages

  • IPAD 2 ,MY  iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE

    iPAD 2 ,MY  iPAD IS UPDATED, BUT MAP SOFTWARE IS NOT WORKING PROPERLY ,LOCATION/ROUTE & DISTANCE ALSO...
    CAN YOU GUIDE HOW TO SOLVE THIS PROBLEM....WAITING FOR SAME.
    VIRAL THAKKER- INDIA.
    ALSO, I HVE SOME PROBLEM IN MACBOOK SOFTWARE OPREATRING SYSTEM IS 10.6.1 AND TRY DOWNLOAD 10.6.8...BUT DON'T KNOW AFTER DOWNLOADING,I M NOT ABEL TO RUN IN MY MACHINE .
    ANY BODY CAN GUIDE ME? TO SOLVE THIS PROBL.
    VIRAL THAKKER INDIA

    Try this: Open up her Home folder (house icon), click Library then Preferences. Locate com.apple.softwareupdate.plst (I don't have my Mac handy so I can't double-check the name; that should be correct) and move it to the desktop or trash, then try running Software Update again. Also try running Software Update while logged in as another administrator.
    ~Lyssa

  • I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly.  This problem occurs after each and every missed call.

    I'm using iphone 5s with ios 7.1.2  & I am facing a new problem after every missed call. i phone  gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its  irritating to reboot the phone frequently after each issue....

    Hello dipthebe,
    Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Regards,
    -Norm G.

  • Pages not loading properly. Flash problem ?

    I updated my osx to 10.7.2 yesterday, everything works fine except some pages in safari wont load up.
    For example, facebook loads in this way (image attached).
    I have flash player installed and updated. Do i need to reinstall flash ? or put some other extensions to make pages load properly ?
    Kindly advice.

    u told-------
    f it's not an extension, then go to ~/Libary/Caches/com.apple.Safari/Cache.db
    Move the Cache.db file from the com.apple.Safari folder to the Trash. Quit, relaunch Safari to test.
    i cant see the above path

  • IPhone 6+wi-Fi not working properly Plus Bluetooth problems

    I just got the iPhone 6+ and Wi-Fi is at very low speeds when I did a testand 
    my router has got  5G capabilities and it's not even close to a that i'm not even getting 1G
    i hope that thay can get it fixed soon
    Plus I noticed when i was in the car driving with Bluetooth on it was very hard to understand the other person
    then I used my Bluetooth headset and same issue

    Hi vebdc,
    I'm sorry to hear you are having these issues with your devices after a recent update to iOS 8.2; I know how frustrating that can be. If you continue having WiFi connection issues with your devices, you may find the troubleshooting steps outlined in the following article helpful:
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Regards,
    - Brenden

  • Replacement I pod touch not working properly (photo App Problem)

    Well Monday I got my replacement Ipod touch and it still seems to be having the same problems with the accelerometer the photos still freeze on a crooked angle, sometimes it will not let me zoom in or out, it even have been making duplicates of the photos and they have not been going to land scape or the vertical position a lot of them do a 360. I had it in land scape and the photos would only move vertical not side to side like it is suppose to in between photos. It has done so much that i can not count. I wish apple did not have this 3 week wait period because well i only had my new one for a week before it broke and now this one.
    Message was edited by: statebowler2003

    well i have tried everything i could think of i even tried working with the actual photos, they are correct in i photo but when they are on my Ipod they have been doing all sorts of things. This does not explain why the others photos do the same thing like freeze on angle, I noticed this because my finger is on the touch when the screen is rotated.

  • Pages not loading properly and can't install add ons

    After installing the Firefox 29 on Windows 7, the mozilla's site and add-ons page do not load properly. Some problem as shown in https://support.mozilla.org/en-US/questions/992362 and tried all the steps but still doesn't work.

    I've got exactly the same problem on both v 29 and 30. The thing is, my desktop computer is fine, my BRAND NEW laptop, stripped of ALL it's HP crapware and just using MSE, can display ANY webpage ok EXCEPT anything to do with Mozilla Firefox add-ons, AND the browser can't install any add-ons. I've tried all the usual banal "fixes", including switching off hardware acceleration, but all I get is plain-text for the pages as per sample, and no install of add-ons themselves. Again, note that this is ONLY a problem on the laptop, not on my desktop. They are both plugged into the same router (both through LAN / ethernet), and so therefore they should both work properly. I don't want to hear any stupid suggestions about formatting and re-loading. Just damn-well fix it, please! I've already wasted more than an hour of my very valuable time on this ridiculous problem. And yes, I've even uninstalled Flash 14 just in case (even though Flash 14 is on my desktop and not causing any problems - yet).

  • After updating iso 6.1.3 in my 4s my phone is not working properly

    After updating iso 6.1.3 my 4s is not working properly the main problem is touch is not working properly and battery problem also there pls anyone have some solution

    IOS 6 has had a lot of issues to date. I have a possible solution to offer but I cannot  be sure it will work. Two ideas.
    1. Reset the phone: hold the lock button and home button in at the same time for 10 seconds. This does nit erase anything, it's basically like rebooting a computer.
    2. Factory reset: Hook up to a computer and go to iTunes. Sync the phone (if possible). Once synced, in the summary screen select factory reset (or may be another name, I'm working from memory) it's right beside update software. This will completely reset the phone, you will need to restore it after the reset it complete. I don't know if this will help you, but it may. I hope you can fix it, good luck!!!

  • HTML Editor in HTMLDB Does Not Work Properly

    Dear Developer,
    The HTML Editor provided in the Build 1.5.0.00.33 (9i) does not work properly. The problems are:
    1. When you press Enter Key in HTML Editor <P> tag is
    added instead of <BR> tag. This causes inconvenience to the end user while editing & displaying the fields formatted by HTML Editor.
    2. Similar problems occur when Bullets are used.
    3. Maximum field width for varchar is only 4000 & there is no other field provided by HTML DB which can store more than 4000 characters information.
    I would like to know whether:
    1. The problem is fixed in the newest buid ?
    2. Is there any workaround or am I missing something, please comment.
    I am using HTML Editor so that user can write long free flowing HTML text, but end users have inconvenience.
    Thanks.

    Hi Ayush,
    The answer to your question 3 is increase the size of the Maximum width on the item. I increased it to 32767 and was able to insert into a clob. I think the limit is 32767.
    Vivek

  • WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

    I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
    Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
    You: Case number is 04971062
    Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
    You: OK
    Daphne L. J: Thank you.
    You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
    Daphne L. J: Thank you for waiting.
    Daphne L. J: Please confirm if the following information is correct:
    Name : Fernando Paramo
    Phone Number :
    E-Mail Address : 
    Model Number : WRT1900AC
    Serial Number : 13J10609406280
    Country : United States
    You: That's correct.
    Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
    You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
    You: But the modem is fine. No disconnections from my ISP.
    You: It is the router.
    Daphne L. J: Alright. What is the current firmware version of your router?
    You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
    Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
    You: Ver. 1.1.10.167514
    You: Latest one.
    Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
    You: That's correct.
    Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
    You: That's correct.
    Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
    Daphne L. J: Thank you for waiting.
    You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
    You: I do not want my current hardware.
    You: It is useless for my needs.
    You: I can't believe I had an older E3000 that didn't give me any problems.
    Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
    You: Cable connection.
    Daphne L. J: Who is your Internet Service Provider?
    You: A company called .
    You: How are they going to contact me?
    Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
    You: Are you paying attention to me?
    You: I already told you it's V1.
    Daphne L. J: They will call or email you. Please double check if these informations are correct:
    Name :
    Phone Number :
    E-Mail Address :
    You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
    You: I want them to contact me to my email. I can't answer the phone during work hours.
    Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
    Daphne L. J: Just in case, do you also have an alternate number?
    Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
    You: I have the one from my office in Mexico. Central Time. Any time is good.
    Daphne L. J: So, you are currently in Mexico?
    You: I work in Mexico but I have the house in USA. I live in the border.
    Daphne L. J: I see. Do you have any other questions or clarifications?
    You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
    Daphne L. J: Thank you for the information. Would that be all for now?
    You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
    You: Because this is a very expensive router that is not working as it should be.
    Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
    Daphne L. J: Would there be anything else you need?
    You: That would be it. I will wait for you to contact me.
    You: Thanks.
    Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

    FernandoRocker wrote:
    Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed).  Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC.

  • WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.

    I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
    Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
    You: Case number is 04971062
    Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
    You: OK
    Daphne L. J: Thank you.
    You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
    Daphne L. J: Thank you for waiting.
    Daphne L. J: Please confirm if the following information is correct:
    Name : Fernando Paramo
    Phone Number :
    E-Mail Address : 
    Model Number : WRT1900AC
    Serial Number : 13J10609406280
    Country : United States
    You: That's correct.
    Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
    You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
    You: But the modem is fine. No disconnections from my ISP.
    You: It is the router.
    Daphne L. J: Alright. What is the current firmware version of your router?
    You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
    Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
    You: Ver. 1.1.10.167514
    You: Latest one.
    Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
    You: That's correct.
    Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
    You: That's correct.
    Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
    Daphne L. J: Thank you for waiting.
    You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
    You: I do not want my current hardware.
    You: It is useless for my needs.
    You: I can't believe I had an older E3000 that didn't give me any problems.
    Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
    You: Cable connection.
    Daphne L. J: Who is your Internet Service Provider?
    You: A company called .
    You: How are they going to contact me?
    Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
    You: Are you paying attention to me?
    You: I already told you it's V1.
    Daphne L. J: They will call or email you. Please double check if these informations are correct:
    Name :
    Phone Number :
    E-Mail Address :
    You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
    You: I want them to contact me to my email. I can't answer the phone during work hours.
    Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
    Daphne L. J: Just in case, do you also have an alternate number?
    Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
    You: I have the one from my office in Mexico. Central Time. Any time is good.
    Daphne L. J: So, you are currently in Mexico?
    You: I work in Mexico but I have the house in USA. I live in the border.
    Daphne L. J: I see. Do you have any other questions or clarifications?
    You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
    Daphne L. J: Thank you for the information. Would that be all for now?
    You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
    You: Because this is a very expensive router that is not working as it should be.
    Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
    Daphne L. J: Would there be anything else you need?
    You: That would be it. I will wait for you to contact me.
    You: Thanks.
    Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Why are previews in Bridge blurry (not rendering properly)?

    Why are previews in Bridge blurry (not rendering properly)?
    I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
    After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
    Hope this helps others.  

    Why are previews in Bridge blurry (not rendering properly)?
    I found a simple answer to this question: control click on the thumbnail and select "purge cache for selection"
    After years of intermittently having this problem, this solved the issue. I had just finished a fresh install of main sys hd (new hd) and first time opening bridge encountered this issue again after not having the problem for a few years.
    Hope this helps others.  

  • In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

    Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

  • PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

    I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

    Don't worry about the cable. For now.
    Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
    Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
    Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
    Do a snapshot of the TC setup from airport utility and post.

Maybe you are looking for