So far so good. But then, how do you return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in mi iMac.

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

Similar Messages

  • How do you return to the US store if you have been switched

    I seem to have been switched to the Russian store without realizing it.  I went to make a purchase on my IPad and was given an error message that I had to return to the US store.  How do you return to the US Store?

    Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the US.

  • How do you return to the current menu when playing dvd?

    Hello everyone,
    I am authoring a dvd that has 3 submenus with several chapters in each. How do I set it up so that if I am watching a chapter in submenu 3, I will return to it if I end it or hit "menu". Right now it keeps defaulting back to the main menu, and I have to navigate to the 2nd or 3rd, depending on what I want to watch.
    Is there a way to do this? I can't seem to find it in the manual.
    Anyhelp is greatly appreciated.
    Ymir

    A few approaches, one way is to set a variable to keep trakc of which menu you are on, then set the menu command for the track to a script
    Here is a thread where a detailed this process and there is also a link to a project you can download.
    http://discussions.apple.com/message.jspa?messageID=6585885#6585885
    You would set the menu command to the same as the end jump.
    There are also other ways, but that will work. Another way is to set the menu command action for the chapter markers themselves. Also note that you may want to consider what you want the menu command to do If you play through the first ten markers (let's say) marker 11 may be on the 2nd selection menu, and you will probably want people to go there. In that case bypass the scripts and just set the menu jumps in the connection tab

  • How do you return to the thunderbird main window in linux when it opens in a local folder?

    I can find no option to return to the main window of Thunderbird 31.1.1 under Fedora 20. It always opens in the same local folder (the only tab displayed under "File Edit View .. " menu bar) that I was reading before yesterday's "logoff.". I tried restarting the computer. Help would be appreciated.

    I think you aren't seeing the account folders pane.
    On the menu, '''View|Layout''' and check ''Folder Pane''.
    If you don't have a menu, hold down <alt> then tap l (lower case L).
    The folder pane shows your accounts and their folders, and is, IMHO, essential for navigating around in Thunderbird.
    http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
    http://www.ramsden.org.uk/5_Lost_toolbars.html
    http://www.ramsden.org.uk/6_I_cant_find_tools_options.html

  • ONCE YOU SEARCH FOR SOMETHING HOW DO YOU RETURN TO THE HOMEPAGE WITHOUT EXITING

    I DONT SEE THE BACK ARROWS

    You can open a new tab to return to the about:newtab page with the thumbnails of visited web pages.<br />
    If you have set the home page to this about:newtab page then you can click the home button on the right end side of the Navigation Toolbar.<br />
    You do not get an enabled back button to go back to the about:newtab page if other pages are opened from this page.

  • I am English but live in Spain, When I got my new Macbook Pro I set the language to English, so far so good. Then I stupidly set the keyboard to British when it is obviously a Spanish keyboard. How can I reset it to Spanish. Sorry cant find question mark

    I am English but live in Spain, When I got my new Macbook Pro I set the language to English, so far so good. Then I stupidly set the keyboard to British when it is obviously a Spanish keyboard. How can I reset it to Spanish. Sorry cant find question mark

    LizMaddock,
    you can reset the input source to Spanish by selecting the Keyboard pane of System Preferences, selecting the Input Sources tab, and pressing the “+” button in the lower-left corner to select one of the Spanish input sources. The “Spanish – ISO” input source is most similar to the physical Spanish keyboard layout.

  • Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. "  How do I do that?

    Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
    I've followed instructions with success until  "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. "  How do I do that?
    I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed.  (I'm on latest Maverick 10.9.2 on iMac)  Then I dragged the VIDEO_TS file from my home DVD into the streamclip app.  It asked which of 4 files to use, and I selected the first one.  Streamclip played the video with the sound.  so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

    Thank you for your quick reply and for clearing up my confusion.  I'm exporting the first section now.  I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie.  I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame?  If it can, what size should I select when I export? 

  • My mom shut of siri in the restritions, but then she turned it back on. the problem is that no matter how many times i shut off my phone and turn it back on, it still has voice control on. Will someone help me.

    My mom shut of Siri in the restrictions, but then she turned it back on, the problem is no matter how many times i turn my phone on and off, it still has voice control. Will someone help me?

    When Siri is OFF, Voice control is automatically ON

  • Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks

    Hello, good day, my question is, buy Logic Express, but then put logic pro 9 in the same price, I can not buy logic studio, and let me know if I buy now logic pro, I can buy separately after jams that bring logic studio. thanks

    José, if you buy and download Logic Pro in App Store now, the best option would be to buy an upgrade to Logic Studio. I don't think Jam Packs are available any more in Apple Store, besides it will be more expensive buying them one by one than upgrading to Studio.
    Español: José, si compras y bajas Logic Pro de App Store ahora, despues la mejor opción será comprar el upgrade a Logic Studio. No creo que estos dias fuera posible comprar Jam Packs de Apple Store, y además comprarlos uno por uno seria más caro que el upgrade a Studio.

  • When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

    When i plug my phone into itunes for the ios update, it downloads but then says it cant connect to the server. How do i get my update?

    Here are Apple Steps for Error 21:
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    My additional advice:
    Also Error 21 can occur with DFU Mode Restore, try Recovery Mode Restore. Restart computer. Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click Restore button of iTunes.

  • How can i determine what the most recent os my imac will run?

    How can i determine what the most recent os my iMac will run?
    Serial Number QP6*****VUW
    Processor 2.16 GHz Intel Core 2 Duo
    Currently running Version 10.5.8
    <Edited by Host>

    You CAN run 10.7, but I don't advise it, buy the 10.6.3 upgrade disk from the Apple Store online and then backup files off the machine and upgrade to 10.6.3., then Software Update to 10.6.8 would be the BEST option for your older hardware and it will run most all of your 10.5 software and be faster than 10.5 or 10.7.
    If you go to 10.7 it won't run nearly any of your 10.5 software and you will have to buy all new ones for a machine that's getting a little bit dated, near it's end of life stage. 10.7 will slow your machine down, especially with low RAM.
    http://roaringapps.com/apps:table
    At your machines stage, the hard drive is getting old, the vents are clogged up with dust and it's going to cost a bit to get the drive etc upgraded. You can if you wish, but 10.7 really needs more RAM (4GB) and a faster hard drive.
    But your still subjected to the video card going out etc.
    IMO upgrade to 10.6.8 and stay there until the wheels fall off, then buy a new 10.8 machine being released after this summer or 10.9 machine.
    Harden your Mac against malware attacks

  • How can I shut down the start sound on my IMac under OS X 10.9.5

    How can I shut down the start sound on my IMac under OS X 10.9.5

    Did you try using 'mute' in the System Preferences> Sound> output>
    control panel? This usually will mute the startup sound; you may have
    to try a few things to be sure only the startup will mute, not all sounds.
    Of course, you could likely write an apple script in automator or in
    text edit, that could automatically mute before shutdown and then
    in startup items, have the script un-mute the audio for everything.
    There are possibilities that do not include the command line; but
    if you learn how to use that, without messing up other functions,
    then even more custom control is possible in Mac OS X.
    With that, you could write a substitute 'sound file' with white noise
    or nothing in there; so instead of Bong, it'd be as quiet as a mouse.
    PS: You may have a local reason why the site link posted above
    does not work for you, but it does function and if the product is
    free to use, and does not include adware or malware, here is an
    untested download link from their site. (I can go there, easily.)
    http://www.allvu.com/index.php/sndownloadpage.html
    and note:
    http://www.allvu.com/downloads/StartNinjaInstaller.dmg is the
    actual DL link for this product. Mouse over the buttons to see it.
    (The other downloads are highly suspect; even this one is to me)
    There may be a reason in your Mac OS X 10.9.x for gatekeeper
    to not allow odd download installations, there is a way around
    that feature, but I do not recommend using unknown software.
    In any event...
    Good luck & happy computing!
    edited 2x

  • When inserting a .pdf of a document with a standard white paper color the test and images show up, but the white background is transparent. How do you also make the white paper color show up?

    When inserting a .pdf of a document into a Keynote template with a standard white paper color the text and images show up, but the white background is transparent. How do you also make the white paper color show up?

    Use the color fill option - select the inserted .pdf and assign a fill color of white to it using the Color Fill Menu on the Toolbar or the Color Picker Palette.
    Good Luck.

  • Hi, for Iphone tips page "see when a message was sent " , then how do I know that the message has been read?

    Hi,
    for Iphone tips page "see when a message was sent " , then how do I know that the message has been read? Thanks  

    Hi Bhavesh,
    Please see my replies inline:
    > 1. If i remember your ealier thread correct also, I
    > would suggest that you drill down in Where Did the
    > Error Occur. Instead of no restriction, select
    > Adapter Engine and also your Corresponding Adapter
    > and then trigger the error message and check if the
    > alert is triggered.
    When I click on "Where did the error occur" -> "Adapter Engine", I do not have a choice of errors from the dropdown. I only see one option "*".
    Is this right?
    > 2. ><i>When I click on "Alert Inbox" ->
    > "Subscription", I get a message "The table does not
    > contain any entries". Is this correct?</i>
    >
    > Yes this is correct. You have defined in your alerts
    > as the option as FIED RECIPIENTS. You also have
    > options like Reciepients via User Role and
    > Subscription Authorization in ALRTCADTDEF.
    >
    I see.
    I've also managed to overcome this problem by selecting "Subscription Authorization" in the Alert Category Definition page, and entering SAP_XI_MONITOR as one of the roles.
    After that, I am able to see a the alert category defined. By default it's already subscribed, because I'm using the same user - PISUPER.
    I saw in another post that the option "Suppress Multiple Alerts of this Rule" should be left unchecked. I tried that, but I still do not see any alerts raised in ALRTDISP.
    What did I miss?
    Please help.
    Thanks.
    Ron

  • I'm trying to import a playlist that iTunes says is 10.09gb onto my iPhone that iTunes says has 11.85gb free but then on step 5/5 of the sync i get a dialogue that says I need another 8.61gb? Any suggestions?

    I'm trying to import a playlist that iTunes says is 10.09gb onto my iPhone that iTunes says has 11.85gb free but then on step 5/5 of the sync i get a dialogue that says I need another 8.61gb? Any suggestions?

    said article below....
    HT1747: iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier
    Learn about iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X 10.6.8 or Earlier

Maybe you are looking for