So I recently upgraded to a Samsung Galaxy S4 but I never removed my phone from iMessage before returning my phone.

So yeah, I recently changed to a Galaxy S4 and what do you know I can't receive iMessages anymore. Being me I was not thinking clearly when I wiped my phone clear and returned it to my provider so iMessage was still enabled on the phone. I went to mysupport to try and remove the number but low and behold my number is no longer on the account. I still can't receive iMessages (surprisingly) so what are my options now?

Speak with an AppleCare advisor either over the phone or by chat.
They will remove your phone number from the iMessage system. That's it! Otherwise after 45 days your phone nymber will automatically be removed from the system. Now or later, it's your choice.
http://www.apple.com/support/contact/   (choose Get Started)
Cheers!

Similar Messages

  • I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't kno

    I upgraded to the Samsung Galaxy S5 two months ago. I'm still unable to sync or move contacts from the phone into my 2012 Toyota Camry. I've been to the dealership to have them look at my car. It also has been tried in 2 different 2014 models. I don't know if it's a Verizon/Samsung issue but I'm quite upset about it. I would have stayed with the S4 if I had know so many issues were on the horizon. I need a fix. Please help.@

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

    I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • I recently bought a student macbook office program, but I never got a product key?

    I recently bought a student macbook office program, but I never got a product key?

    Where dis you buy it? Contact them and ask for the key. Was it a download? If so they likely emailed you the key. Was it a packaged disk? If so the key is likely on the packaging.

  • HT4061 I have just recently bought an iphone 4s and the techs could transfer my contacts from my samsung galaxy mini but not my photos or my music.How do I do this?

    I have just recently bought an iphone 4s and the tchs in the shop transferred all my contacts from my Samsung galaxy mini to my iphone for me bought they could not transfer my photos or my small amount of music.How do I do this?
    Given that I am a complete novice,some straight forward and simple advice would be helpful folks.

    Get the Samsung Kies application to transfer it onto your computer, and then use iTunes to add it to your iPhone.

  • Upgraded to  new samsung galaxy s4 from a I phone 4 and I can't receive text messages from anyone with an I phone.

    I upgraded to a new Samsung Galaxy S 4 from an IPhone 4 and I can't get text messages from anyone who has an IPhone.

    Speak with an AppleCare advisor either over the phone or by chat.
    They will remove your phone number from the iMessage system. That's it! Otherwise after 45 days your phone nymber will automatically be removed from the system. Now or later, it's your choice.
    http://www.apple.com/support/contact/   (choose Get Started)
    Cheers!

  • We have two Airprint capable printers thagt my wife uses with her Samsung Galaxy s4 but both printers are NOT listed on my iPhone 4s. any ideas why and how to correct??

    I have two printers ... Cannon MS5400 and an Epson Workforce 840 ... both are Airprint capable as my wife prints to both via her Samsung Galaxy S4.
    My iPhone 4S only has the Cannon listed when I go to print. Any deas as to what is going on and how to correct???

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Upgraded from an iPhone 4s to a Galaxy s4 but iPhone users still message me with iMessage and the message to not end up delivering to me? HELP?!

    So i've just upgraded from an iPhone to a galaxy s4 but the messages keep being recieved as an imessage :S (when iphone users message me)

    Contact AppleCare so they can revoke your certificate

  • Had an Iphone 4s and switched to a Samsung Galaxy s4 and now cant receive text messages from people with an iphone

    Had an Iphone 4s switched to samsung galaxy s4.  Now I cant get text messages from people with Iphones.  Need help.  Starting to get extremely mad and upset with apple products.  HELP PLEASE

    Speak with an AppleCare advisor either over the phone or by chat.
    They will remove your phone number from the iMessage system. That's it! Otherwise after 45 days your phone nymber will automatically be removed from the system. Now or later, it's your choice.
    http://www.apple.com/support/contact/   (choose Get Started)
    Cheers!

  • Have changed from I phone too samsung galaxy 4 but cannot receive texts from people with I phones can u help please

    Hi can you tell me why I can not receive text messages from a I phone too my samsung galaxy s4 having had a I phone before

    Agreed.  Should not be an issue if they use text messages.   iMessage will NOT work to a non Apple device.
    I have the GS3 and a house full of Apple products.   I really love the phone and am hoping to get the Note 3 in a few months.
    Have you added 'SmoothSync for Cloud' to your accounts in the settings?   This allows mail, calendar and contacts to sync between your Apple and Galaxy.
    you should also add DropBox
    You might look at Swiftkey as your keyboard as it is much better than the stock keyboard.
    I also paid for Enpass, which is an encrypted password storage.   It syncs back and forth with dropbox. 

  • Recently i got another samsung galaxy s4 and i thought i linc and sync but my 2 gmails arn't working and i get an error code that the system is down but also th

    Changes have occured in google as far as gmail
    goes you cannot have apps an an email running at the same time because it confuses the cookies.At first i actually had to get another mobile because of the change i messed up my software and the phone was under warranty so they gave me a refurbished but when i went to load my contacts thats when i discovered that what and why but i still dont' know how to fix the problem.i first attepted to close 1 of the gmails off of my yahoo sign in profile and notifer page .it made things worse .there is no tel number for either yahoo or gmail . I need help to figure this out before i crash another cell.

    That is my question? Help!

  • Samsung Galaxy S4 Error - SIM Card Removed - Unable to detect your SIM card.

    I am having the same problem. The problem still occurs even after the 5.0.1 Lollipop update.

    I've been having this issue as well. It did not occur on the stock 4.2.2 firmware. It started out at 4.3, where my signal would appear as no bars (not a crossed out circle, just 0 bars). I would have to enter airplane mode, or restart my phone to fix it. In 4.4, it changed to stating my sim card was not detected and I would have to restart my phone. In 5.0, it started out by having a no service (crossed out circle) signal, progressed to no sim card - restart.
    I got the same line of crap from Samsung and AT&T that the rest of you have. First person I talked to was Samsung (their hardware, their problem). They told me, much like many of you have seen -
    1. Release the cache from the update (didn't work).
    2. Reset the phone to factory settings (didn't work).
    3. Go down to the Galaxy Experience Center at BestBuy to get a download for the OS files (didn't work)
    4. The Samsung guy at BestBuy stated there were 2 recourses available
    --a. Send my phone to the Samsung repairs in Texas for free under warranty, or $70 outside it, to fix it
    --b. Go to AT&T and get the SIM card replaced, although it likely wouldn't work.
    --I countered with I could also do c. rollback my firmware to 4.2.2. He warned me doing so would void my warranty, and that I could possibly brick my phone. I told him my phone was well outside of the shoddy 1 year warranty, and that I understood the risks in changing firmware versions.
    5. Went to AT&T to get the SIM card replaced. The AT&T employee stated that he had heard of the issue, and the last 2 people who replaced it didn't get the issue fixed that way. Replaced the SIM card. (Didn't work)
    6. Called AT&T, asked if there were network upgrades being done to the 3 nearby towers, they stated no, but that this issue was a known issue and that it would be at the manager's discretion to replace my phone as it was out of warranty.
    So I perused the internet some more, saw an interesting post. 1 person decided to go to Application Manager and disable all of AT&T and Samsung's bloatware. Others followed suit and it worked for them. I tried it myself, and had fixed my phone for a while. The problem for me was that I had my phone set to auto download updates. The issue returned today, if you can't tell.
    I checked my updates, and saw Android System WebView was recently updated. I rolled it back just in case, but I am going to go through my phone once again to see what other bloatware is left.
    It would make sense that it was added bloatware that has broken our connections, as bloatware has been added in each firmware update.
    [edit for missed step]

  • Can import photos into PSE 12 running on Win 8.1 from a Samsung Galaxy S4, but no videos recognized.

    I have about 100 photos and 10 videos on my S4 and I know they're valid because they all display/play back just fine on the device.  But Photoshop Elements 12 only recognizes the image files, none of the videos.  It tells me there are no valid videos on the device.  I'm attempting to import media with the S4 set up as a camera (this is a configuration option Samsung gives you when connecting the phone to a PC via USB).
    Update: If I set the device up as a media device, I can use Windows Explorer to copy the video files to my PC.  PSE then sees them in the watched folder, imports them, and they work fine.  So the issue seems to be in recognizing and importing the videos when the S4 is configured as a camera (the normal way of importing photos and images into PSE).

    You must have Premier Elements that recognizes Videos.  Premier Elements is sometimes sold in tandem with Photoshop Elements so that both can operate seamlessly.
    Amazon has got special price for buying both packages together.  I believe it is a difference of about $20, i.e. you pay 20 bucks more if you buy both products.

  • I recently upgraded by business catalyst to webCommerce but now my old muse website will only show up as a Webbasics , how to upgrade my old site without paying again for BC upgrade?

    I can start new website in BC, but my old one that I had up and running will not 'link' to my upgraded BC package

    This is because it really only supports the features in that. It does not handle all the layout features etc. You can fudge your way using it to build with the higher plans but it does not have access to a lot of the features. So you need to be aware of that.

  • I keep getting a pop-up window that says I must upgrade to Firefox 15.0.1, but I already have done that from the Mozilla website.

    I got a pop-up window from Firefox saying that I needed to upgrade (I had Firefox 14.0.1). I have a Mac desktop with operating system Lion. When I'd try to connect through the prompt on that window, it wouldn't connect. So I went to the Mozilla website and downloaded version 15.0.1.dmg. But I'm still getting the pop-up window.
    Also, when I start my computer, there's always a question mark in the Firefox place on the dock and a window that prompts me to drag the firefox emblem over to another emblem. But when I do that, I get a window that says that this is an older version of Firefox than the one that's installed, do I want to replace it with the older one (which I have declined to do).

    Make sure that Firefox gets installed properly.
    Open the Firefox disk image (DMG) file and drag the Firefox program to the application folder on your hard drive.
    You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    *http://www.mozilla.org/en-US/firefox/all.html
    *Trash the current Firefox application (e.g. open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re-)install
    *Install the new version that you have downloaded
    *https://support.mozilla.org/kb/Installing+Firefox+on+Mac
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

Maybe you are looking for

  • Enhance timing in garageband 3

    why does enhance timing not seem to work I follow the instructions but nothing happens. GB2 did the same. Any ideas?

  • Barcode not printing in pdf output

    Hi, Iam working on report which has to display barcode. When i run the report iam getting barcode displayed in RTF output but its not displaying in PDF format ouput. Can you please suggest? Thanks, Nishi

  • Can't copy movies from itunes to iphone

    Just today, and this has not occurred before, I am getting an error message when trying to sync movies from iTunes to my iPhone.  The error message: "Some of the items in the iTunes library, including (movie name), were not copied to the iPhone becau

  • How to get back my VK app?

    I cant  get Vk app

  • My blackberry wont turn on HELP ME PLEASE!

    I tired to update my blackberry but then it said the device could not be recognised so i then took out the usb and now it just won't turn on but it just flashes red some one help me PLEASE!!!!