So I want to use an imaging device with Vision Assistant then incorporate that into my LabView 8.6 code. How can I do this?

So here's what I have so far written, I have LabView program to interface with my microscope stage, autofocus. I want to try now to interface the camera using Vision Assistant.
The procedure I want the program to perform is taking this CR-39 detectors and placing them on this stage and the camera to take images of this detector frame by frame. So I want the program to go to the very top corner of the detector on the stage. Then the camera would autofocus (if needed) and take an image. So this would take an image for every micron of the detector on that row. Then move to the next and so on. Until it has successfully imaged the whole detector. Is anyone well versed on Vision Assistant and willing to give some advice on this? It would be greatly appreciated.
The purpose is eliminate the previous method of acquiring images by manually focusing on the tracks created by the particles. I want to this program to run itself without a user being present, so just pressing a button would send the program into autopilot and it would perform the procedure.
What are CR-39 detectors?
Allyl Diglycol Carbonate (ADC) is a plastic polymer. When ionizing radiation passes through the CR-39 it breaks the chemical bonds of the polymer and it creates a latent damage trail along the trajectory of the particles. These trails are further ethced using a chemical solution to make the tracts larger which can finally be seeing using an optical microscope.
Thank you,
HumanCondition

Hi Justin,
Yes I already have a vi that controls the stage.
So the camera is stationary above the stage. Now what I want to do is get the camera to take the pictures of the detector by moving the stage frame by frame for example starting from the top right corner of the detector (by taking an image) then ending on the top left corner of the detector (by taking an image) then having the stage move down a row and starting the process over again until each frame (or piece) has been imaged.
My goal is while the stage is moving to every little frame of the detector I would like for it to autofocus if necessary, and take a image to be for each frame of the detector.
Using the auto focus requires the moving of the stage up and down.
HumanCondition

Similar Messages

HT1920 I redeemed 2 gift cards totaling $25.00 today. I purchased iTunes today and wanted to use the gift card but I was charged on my credit card for the purchase. How can I correct this?

Is there a way to transfer itunes purchased with a credit card to iTunes gift cards redeemed today?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I am trying to make a purchase and want to use my Apple ID Balance and NOT charge the debit card under my account info. How do I do this?

I am trying to make a purchase and want to use my Apple ID Balance and NOT charge the debit card under my account info. How do I do this?

As far as I'm aware iTunes always charges the account balance first and when this expires charges any remaining amount to your credit/debit card. The one exception I am aware of (though there could be others) is that Apps purchased from the Canadian store must always be charged to a card rather than a gift card voucher balance due to local legislation.
tt2

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device

mickyja wrote:
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
Micky,
The iTunes Store sells songs in AAC format. Most Android phones can play AACs. Just sync them to your phone per the instructions with the phone.
If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide:
iTunes: How to convert a song to a different file format - Apple Support
(This conversion does not require burning.)
For future reference, note that the iTunes Store is really optimized for people using Apple devices. You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music.

No Image - 1473R With Vision Assistant

Hopefully this is a simple fix and I'm missing something very obvious, so here is what's up. I'm originally a text programmer but for this project I'm stuck using LabVIEW which is completely unfamiliar; I've been working on this for days with no progress so I thougt I'd see if anyone had some pointers. The goal of the project is to use the PCIe-1473R FPGA to do live gain control, overlay, and maybe some recognition.
I started with the "Image Processing with Vision Assistant on FPGA" example and made a few simple changes to just attempt to get a video feed through. The camera we are using is a Pulnix TM 1325 CL, which outputs a 1 tap/10 bit Camera Link signal. Since this example VI is originally configured 1 tap/8 bit I changed the incoming pixel to be read as 1 tap/10 bit and compiled and tested. When I try to start video acquisition I get no errors but no frames are grabbed. The frame's acquisitioned count does not increase and nothing is displayed. If I switch to line scan I get a scanning static image, but this is not a line scan camera and my other NI frame grabber card shows an image from the camera fine.
I wasn't all that surprised with this result, as the input is 10 bit and the acquisition FIFO and DMA FIFO are both 8 bit orginally. So, I changed them to U16 and also changed IMAQ FPGA FIFO to Pixel Bus and IMAQ FPGA Pixel Bus to FIFO blocks on either side of the Vision Assistant to U16. With this configuration, I again get no image at all; same results. I suspect this is because the incoming image is signed, so the types should be I16 instead. However, there is no setting for I16 on the Pixel Bus conversion methods. Am I not understanding the types happneing here or is there an alternative method for using Vision Assistant with signed images? I'd think it'd be odd not have support for signed input.
Anyway, I've tried all the different combos of settings I can think of. Does anyone have any input? I feel like it must be either a buffer size problem or a signing problem, but I don't really know. Any and all input is welcome!
Thanks for helping out a new guy,
Kidron

I ended up resolving this issue by switching cameras. The end goal was to use a FLIR SC6100, so I switched to it and was able to get things working shortly. The FLIR does use unsigned ints, so I believe that's what resovled the issue for anyone running into this in the future.

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

I had my itunes acct with a yahoo mail, now Im using icloud with my apple id, which is different than itunes I had. how can I merge this 2 accounts? I still have money in my old itunes acct. 2 acct

Is your phone still signed in with your old iTues ID for iCloud (in Settings>iCloud)?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account. Everything that I purchased under that id name will not play. How can I fix this?

I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
Note: @mac.com and @me.com Apple IDs can not be renamed. If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
From here > http://support.apple.com/kb/HT5622?viewlocale=en_US
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

TS1646 When I try to purchase a song, it will not let me use the gift card that I redeemed. It directs me to my billing info and says that my session has timed out. How can I fix this?

When I try to purchase a song, it will not let me use the gift card that I redeemed. It directs me to my billing info and says that my session has timed out. How can I fix this?

For some reason this worked for me. I went into my account and changed my first name, maybe it causes itunes to reset. What ever it does my itunes works now.

HT4929 I have os x 10.6.8. When I try to update it says there are no updates for my sytstem. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

I have os x 10.6.8. When I try to update it says there are no updates for my system. I want to get iCloud on my Mac Book Pro and one of the requirements is 10.7.2 how can I get this done?

Welcome to the Apple Community.
You can purchase Lion from the Mac App Store. You will need to meet the requirements for Lion, but the Mac App Store will tell you whether your Mac is capable of running Lion or not.

I want to transfer my Adobe Creative Cloud Subscription to another person as I no longer need it. How can I do this?

I want to transfer my Adobe Creative Cloud Subscription to another person as I no longer need it. How can I do this? Thanks

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I want to type "0800" or "20.00"; Pages automatically "corrects" the entries to: "800" and "20." ! How can I turn this automatic correcting OFF?

In my business it is critical that I be able to enter numbers in the format I choose. I want to type "0800" or "20.00"; Pages automatically "corrects" the entries to: "800" and "20." ! How can I turn this automatic correcting OFF? I am a relatively new user of Pages and cannot find a means of turning the autocorrect OFF.or of setting the number formatting rules.

Pages v5.5.2 does not change 0800, or 20.00 when entered as body text for me. There is nothing in substitution, or Pages preferences settings that can effect these values.
However, when typed in a Pages table cell with the wrong data format, mischief does occur. In order to preserve 0800, select the Cell tab on the format panel, and set the cell data format to Text, or a custom data format. To preserve 20.00, you must set that cell data format to either Automatic with 2 decimals, or Number with 2 decimals.

When I sync my iPhone or iPad with I tunes, the music library appears on the device, but 95% of it is greyed out and cannot be played. How can I fix this?

When I sync my iPhone or iPad with I tunes, the music library appears on the device, but 95% of it is greyed out and cannot be played. How can I fix this?

kimberlyfromtopeka wrote:
Ok,thanks but, I should be able to something so that I am able to sync the entire library again not just the purchased songs.
If the non purchased music is not on your computer, how can it Sync to your iPhone...

I want to use my phone whilest away traveling. do i need to get my phone unlocked, if so how do i do this?

i want to use my phone whilest away traveling. do i need to get my phone unlocked, if so how do i?

You can either use your carrier's international roaming plan, or if you have an unlocked phone, you can use local SIM cards from any compatible GSM carrier. If your phone is locked, you will need to contact your carrier to inquire as to the requirements and fees to have it unlocked. Not all carriers offer unlocking.

I want to move my library from one account to another, it is also on a different computer. How can I do this?

I want to move my library from one account to another. However, when I try to sync th old account it is not syncing to my iphone or exporting out. How can I do this? Someone told me that it may be set to WiFi but it was not. My libray is sitting there but I can get it out. Mean while I have changed accounts and down loading to the iphone on my new account (and changing computers as well) How do I make this work so I can get my Library to sync to my iphone or export it from the old account. Is there anyway to move my library from one accont to another from the itunes side?
Thx Rick

Media is permanently tied to whatever account was used to purchase it. There is currently no possible way to change the account it is tied to.
Is there a reason why a new account was created?

Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on iTunes, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything, how can I stop this. please help!thx

Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you

Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
Also see:
iTunes Store: Associating a device or computer to your Apple ID
since you may have started the 90 day window.
For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing.

So I want to use an imaging device with Vision Assistant then incorporate that into my LabView 8.6 code. How can I do this?

Similar Messages

Maybe you are looking for