So, starting today I am unable to get any webpage to load, although IE and Chrome work just fine. I'm wondering if anyone else has had this problem, if so has anyone fixed it?
I've tried everything i can think of, reset modem, cleared cache/cookies, restarted my computer, re-install firefox 8.0, and I opened firefox without any addons enabled.
Over the past 2 months, at most, I've had nothing but problems with firefox, firefox 7 wouldn't work right with my logins (after logging in it would not load any pages), so I waited a month and downloaded firefox 8.0, was working fine for a few days then, like I said, it doesn't load pages period. Thank you, anyone who reads this and helps me out.
I've tried everything i can think of, reset modem, cleared cache/cookies, restarted my computer, re-install firefox 8.0, and I opened firefox without any addons enabled.
Over the past 2 months, at most, I've had nothing but problems with firefox, firefox 7 wouldn't work right with my logins (after logging in it would not load any pages), so I waited a month and downloaded firefox 8.0, was working fine for a few days then, like I said, it doesn't load pages period. Thank you, anyone who reads this and helps me out.
Similar Messages
-
I was charging my iPad2 and when reaching 90% it just went black and can't be started again. Anyone that have had this problem and know what to do?
I have had this problem several times. The iPad comes off charging with a black screen and only a hard reset works to get it back. Then you have to go to settings to be sure nothing changed there.
I have had serveral hard resets and three restore operations and the problem recurs. I am not sure if it is the iPad2 or an app that is causing the problem. So far I can live with it as is.
Jay -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?
Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike -
When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!
Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.
-
I have sent my iPod back for servicing because it is cracked, with some dispute with Apple I have managed to get a brand new iPod Touch. Just wondering if anyone has had this problem how long did it take from "Replacement Product Pending" to get back to the UK
Not really. Is say "pending"
pend·ing
/ˈpendiNG/
Adjective
Awaiting decision or settlement.
Preposition
Until (something) happens or takes place: "they were released on bail pending an appeal".
Synonyms
adjective.
pendent - undecided - unsettled - outstanding - pendant
preposition.
during - until - till - to -
I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister".
If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
Best of luck. -
None of the quicktime videos from websites play anymore. This started yesterday. Before that I could play them all. Now none of them work. Has anyone had this problem? How did you fix it? Thanks in advance for the help!
Did you try
1, resetting the device
2, deleting all cookies / history items of Safari? -
I have a local VI that is simply a control that writes to the datasocket server whenever the control value changes.(the dataitem on the server is permanent - its initialized and never released by the server)
In the same local VI I have a datasocket read polling a different dataitem on the server.
The remote machine has a VI that reads the permanent dataitem on the server once per second.
For some reason, after adding the local VI mentioned above, the remote VI stopped picking up the first change in the permanent variable.
I'd start both the local and remote VIs...
Then change the local control and the remote V
I would not update - as if the datasocket write(upon adjusting the control) did not take place. So I'd change the control value again - this time the remote VI would update to this new value. And from here on out - the remote VI would update correctly. This problem only occurs when the local VI is first started up.
What in the heck is going on?dingler44 wrote:
>
> Has anyone else ever had a problem where you had to perform 2
> datasocket writes before the datasocket read would pick up the change?
>
> I have a local VI that is simply a control that writes to the
> datasocket server whenever the control value changes.(the dataitem on
> the server is permanent - its initialized and never released by the
> server)
> In the same local VI I have a datasocket read polling a different
> dataitem on the server.
> The remote machine has a VI that reads the permanent dataitem on the
> server once per second.
> For some reason, after adding the local VI mentioned above, the
> remote VI stopped picking up the first change in the permanent
> variable.
> I'd start both the local and remote VIs...
> Then change the local control and the remote VI would not update -
> as if the datasocket write(upon adjusting the control) did not take
> place. So I'd change the control value again - this time the remote
> VI would update to this new value. And from here on out - the remote
> VI would update correctly. This problem only occurs when the local VI
> is first started up.
>
> What in the heck is going on?
Gorka is right, this came up on Info-LV a few days ago. Someone
described a similar problem. I replied that I had seen similar
behaviour, reported it to NI, and they verified a bug. There is no fix
yet, but they are aware of it and will fix it. No anticipated release
date for the fix.
Regards,
Dave Thomson
David Thomson 303-499-1973 (voice and fax)
Original Code Consulting [email protected]
www.originalcode.com
National Instruments Alliance Program Member
Research Scientist 303-497-3470 (voice)
NOAA Aeronomy Laboratory 303-497-5373 (fax)
Boulder, Colorado [email protected] -
I get the following error message: Gone The requested resource / is no longer available on this server and there is no forwarding address. Please remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request. IE & Chrome work just fine - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I will need to abandon Firefox. Thanks.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC) -
Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??
Have deleted temp video, configured anti spam and firewall, and one specific video keeps giving me an error. Just tried downloading a previous episode of the show and it worked just fine. Always sunny in philly "Charlie rules the world" anyone else??
-
I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?
Since you give no clue as to what make/model/version WiFi router you are using or how you have it configured it's hard to comment.
Look here for some WiFi troubleshooting advice http://www.apple.com/support/ipad/wifi/. -
When I go to iTunes and then check for updates. I can not do this action due to the fact iTunes will not connect to the internet although the internet is working just fine, what do I do to fix this issue? Apparently I am currently using iTunes 7.0.
If you're really using iTunes 7.0 you are very far behind the current version - maybe it is trying to connect to a decomissioned server. In fact I am kind of surprised it will run on a Macbook Air. Are you sure you are running iTunes 7?
-
My messaging app crashes 5+ times each day, or causes my phone to lag until I restart it. Is anyone else still having these problems, even after the update?
the vz messaging app is garbage.Thats probably why no tech support people have replied to your question yet. I had similar issues & decided to disable it. May i suggest you download 'textra' or even hangouts?
-
I use Firefox for going online all the time. Now, suddenly, when I try to connect it says the server can't be found. Internet Explorer and AOL are working just fine. However, I don't want to use them.
How do you fix this?
Maybe you are looking for
-
Windows 7 can't recognize my AMD Radeon HD 6970M 1024 MB graphics card
Hey community - I am having issues running Star Wars the Old Republic on my brand new iMac desktop with Windows 7 installed. I am getting an error message that is associated with the fact that WINDOWS 7 will NOT recognize my AMD Radeon HD 6970M 1024
-
Virtual Machine crashing all the time: The previous system shutdown at a certain date was unexpected
Hello, I've a build node that is constantly crashing and rebooting. When I go to system event log I'm not able to identify the reasons for such behavior. For instance regarding the machine latest crash I can see: The previous system shutdown at 10:2
-
Bonjour, je posède un PowerBook G3, qui me pose bien des soucis !!!! lorsque je l'allume il ne s'allume qu'après le 8 ou 10 ième reboot , la il fonctionne corectement ( que ce soit sur le secteur ou avec ça batterie). quelqu'un a t 'il une idéé d'ava
-
How to pass preprocessing information to a web service report?
Post Author: rmsky CA Forum: Crystal Reports Does anyone know how a web service client can provide information to the constructor for a Crystal Reports web service report so that it can preload a non-trivial dataset prior to running a report. For exa
-
Oracle 11g, Locator, and 3D data, part 2
All, I'm trying to decipher the differences in the Locator vs Spatial functionality for 3D data in Oracle 11gR2. I found the archived discussion: https://community.oracle.com/thread/2566650 In this discussion, the answer was that using the SDO_RELAT