Soap adapter not able to see payload

Hi all,
I am using SOAP adapter at receiver side. We are sending some XML file to supplier https server location.
Here in SXmb_Moni the message shows checked flag but it is not showing the Output payload over there? what can be the reason for this.
One more thing is that at reciever side we are using https: // abc.com URL . When I go to RWB and see the communication channel monitoring then in some case it shows SSL exception and in sme IO. Exception.
Here every thing is fine. Please let me know what additional steps/ configuration we need to do in XI to post the xml data to the https server.
Your comments and input would be thankful.
regards
Ram Singhal

Hi,
What is the some exception ..
please give exact error..
See SAP Note 856597
 Q: Can I use SSL for my receiver adapter?
 A: Yes. You can enter any target URL with "https:..." and the adapter will use the HTTP protocol over an SSL connection.
 Q: I get the SSL handshaking error. I get some error when I call my SSL web service.
 A: First, please make sure that the SSL server is working correctly with another client. If the server is working and you still have the problem, the most likely cause is that your J2EE engine is not configured appropriately to be able to use the unrestricted strong features of the cryptographic library. Please make sure that:
 - The JDK java security lib directory ($JAVAHOME/jre/lib/security) contains the unrestricted strong version of local_policy.jar and US_export_policy.jar, which are about 5KB and not the restricted version that are about 3KB each. If you have the restricted version, please refer to http://java.sun.com/ to obtain the unrestricted version.
 - The full version of IAIK is available in the J2EE engine's Security Provider. To check this, go to Service -> Security Provider -> Cryptography Providers, and select IAIK. The Provider Information field should show the full version (e.g., IAIK Security Provider v3.12) and not the evaludation version (e.g., IAIK Security Provider v3.01, evaluation version). If you have the evaludation version, please refer to the security setting section of the SAP J2EE documentation.
 Q: Can I use SSL with client certificate to authenticate my adapter?
 A: Yes. You can configure your receiver channel to use a client certificate. This feature is available from SP13.
 Related Questions "I cannot call an SSL web service requiring a client certificate."
 Q: I cannot call an SSL web service requiring a client certificate.
 A: If you can call an SSL web service requiring no client certificate, please make sure that your clietn certificate is valid and correctly stored in the key store of the J2EE engine. There have been some problems reported in SP13. Please consult SAP Note 870845 for the correction and/or the workaround.
 If your certificate entry contains more than one certificates, please make sure that they are ordered correctly.
 If you are experiencing some problem, please refer to note 888421 for three different options in using certificates at SSL handshaking.
 To trace security related problems, the logging level of components com.sap.aii.security.lib and com.sap.aii.af.security should be set to DEBUG, in addition to the SOAP adapter component com.sap.aii.af.mp.soap and com.sap.aii.messaging. It is recommended to reactivate (or restart) the channel after this setting.
Regards
Chilla..

Similar Messages

SOAP adapter not working - say No adapter registered??

Hello experts,
I have configured a receiver SOAP adapter to call a web service from my UDF for a SOAP Lookup. But in my RWB's Channel Monitoring the status of all my SOAP adapters configured in the system is "????" with the short text "No adapter registered for this channel".
When i run my UDF, there is no technical error in the code by the SOAP adapter which i call in the UDF is not gtting called with the error as "The channel cound not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache".
The channel does exists in the ID and when when i see the cache status, it saws all green though in channle monitoring i am not able to see anystatus.
Please help.
Regards,
Yash

Make sure that the channel name is exactly similar. Edit the channel, just description, save and activate again. Then perform CPACache refresh using PIDIRUSER and this url.
http://XIHost:JavaPort/CPACache/refresh?mode=full
Regards,
Prateek

Cisco 877w - Apple devices not able to see wired apple TV

Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
David

Hello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward.

Not able to see the Adapters@Integration Directory!!

Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
 Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNM

hi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
check the last post here.... u will get ur answer !!!
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer

Not able to see scope Compensate

HI ,
i am using Bpel 1.1
I have created two Services one is Flight Booking Service,another is Hotel booking Service,i have implemented compensation. i have raised exception thorough the "Throw", i used catch all to hold the this exception.in that catch i have i used Compensate , to roll back the booked services,
but in the Compensate i am not able to see the scopes of the Airline,HotelScopes.
Below is my Travlmgmt.bpel in whihc i have used the two services:
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="TravlMgmt"
 targetNamespace="http://xmlns.oracle.com/AirLine_Booking/TravelPlan/TravlMgmt"
 xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
 xmlns:client="http://xmlns.oracle.com/AirLine_Booking/TravelPlan/TravlMgmt"
 xmlns:ora="http://schemas.oracle.com/xpath/extension"
 xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
 xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
 xmlns:ns1="http://xmlns.oracle.com/AirLine_Booking/Hotel/HotelBooking"
 xmlns:ns2="http://xmlns.oracle.com/AirLine_Booking/Project1/AirlineBooking"
 xmlns:bpel2="http://docs.oasis-open.org/wsbpel/2.0/process/executable">

<partnerLinks>
 
 <partnerLink name="travlmgmt_client" partnerLinkType="client:TravlMgmt"
 myRole="TravlMgmtProvider"/>
 <partnerLink name="Hotel_Service" partnerLinkType="ns1:HotelBooking"
 partnerRole="HotelBookingProvider"/>
 <partnerLink name="Flight_service" partnerLinkType="ns2:AirlineBooking"
 partnerRole="AirlineBookingProvider"/>
</partnerLinks>

<variables>
 
 <variable name="inputVariable"
 messageType="client:TravlMgmtRequestMessage"/>
 
 <variable name="outputVariable"
 messageType="client:TravlMgmtResponseMessage"/>
 <variable name="Invoke_AirLine_Book_InputVariable"
 messageType="ns2:AirlineBookingRequestMessage"/>
 <variable name="Invoke_AirLine_Book_OutputVariable"
 messageType="ns2:AirlineBookingResponseMessage"/>
 <variable name="Invoke_Hotel_HotelBook_InputVariable"
 messageType="ns1:HotelBookingRequestMessage"/>
 <variable name="Invoke_Hotel_HotelBook_OutputVariable"
 messageType="ns1:HotelBookingResponseMessage"/>
 <variable name="Invoke_Flight_Cancel_Cancel_InputVariable"
 messageType="ns2:AirlineCancelRequestMessage"/>
 <variable name="Invoke_Flight_Cancel_Cancel_OutputVariable"
 messageType="ns2:AirlineCancelResponseMessage"/>
 <variable name="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
 messageType="ns1:HotelCancelRequestMessage"/>
 <variable name="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
 messageType="ns1:HotelCancelResponseMessage"/>
 <variable messageType="bpelx:RuntimeFaultMessage" name="FaultVar"/>
 <variable messageType="bpelx:RuntimeFaultMessage" name="FaultVar_1"/>
</variables>
<faultHandlers>
 <catchAll>
 <sequence name="Sequence6">
 <compensate name="Compensate1" />
 <compensate name="Compensate2" />
 </sequence>
 </catchAll>
</faultHandlers>

<sequence name="main">
 
 <receive name="receiveInput" partnerLink="travlmgmt_client"
 portType="client:TravlMgmt" operation="process"
 variable="inputVariable" createInstance="yes"/>
 <flow name="Flow_of_Hotel_Flight">
 <sequence name="Sequence">
 <scope name="Scope_Airline" variableAccessSerializable="yes">
 <bpelx:annotation>
 <bpelx:general>
 <bpelx:property name="userLabel">AirLineScope</bpelx:property>
 </bpelx:general>
 </bpelx:annotation>
 <compensationHandler>
 <sequence name="Sequence4">
 <assign name="Assign_Airline_Cancel">
 <copy>
 <from variable="Invoke_AirLine_Book_OutputVariable"
 part="payload" query="/ns2:BookingResponse/ns2:PNR"/>
 <to variable="Invoke_Flight_Cancel_Cancel_InputVariable"
 part="payload" query="/ns2:CancelRequest/ns2:PNR"/>
 </copy>
 </assign>
 <invoke name="Invoke_Flight_Cancel"
 inputVariable="Invoke_Flight_Cancel_Cancel_InputVariable"
 outputVariable="Invoke_Flight_Cancel_Cancel_OutputVariable"
 partnerLink="Flight_service" portType="ns2:AirlineBooking"
 operation="Cancel" bpelx:invokeAsDetail="no"/>
 <assign name="Assign2">
 <copy>
 <from variable="Invoke_Flight_Cancel_Cancel_OutputVariable"
 part="payload" query="/ns2:CancelResponse/ns2:Status"/>
 <to variable="outputVariable" part="payload"
 query="/client:processResponse/client:Status"/>
 </copy>
 </assign>
 </sequence>
 </compensationHandler>
 <sequence name="Sequence2">
 <assign name="Assign_AirLine">
 <copy>
 <from variable="inputVariable" part="payload"
 query="/client:process/client:FlightNumber"/>
 <to variable="Invoke_AirLine_Book_InputVariable" part="payload"
 query="/ns2:BookingRequest/ns2:FlightNum"/>
 </copy>
 <copy>
 <from variable="inputVariable" part="payload"
 query="/client:process/client:CustomerName"/>
 <to variable="Invoke_AirLine_Book_InputVariable" part="payload"
 query="/ns2:BookingRequest/ns2:Name"/>
 </copy>
 </assign>
 <invoke name="Invoke_AirLine"
 inputVariable="Invoke_AirLine_Book_InputVariable"
 outputVariable="Invoke_AirLine_Book_OutputVariable"
 partnerLink="Flight_service" portType="ns2:AirlineBooking"
 operation="Book" bpelx:invokeAsDetail="no"/>
 <assign name="Assign1">
 <copy>
 <from variable="Invoke_AirLine_Book_OutputVariable"
 part="payload" query="/ns2:BookingResponse/ns2:Status"/>
 <to variable="outputVariable" part="payload"
 query="/client:processResponse/client:Status"/>
 </copy>
 </assign>
 </sequence>
 </scope>
 </sequence>
 <sequence name="Sequence1">
 <scope name="Scope_Hotel" variableAccessSerializable="yes">
 <bpelx:annotation>
 <bpelx:general>
 <bpelx:property name="userLabel">HotelScope</bpelx:property>
 </bpelx:general>
 </bpelx:annotation>
 <compensationHandler>
 <sequence name="Sequence5">
 <assign name="Assign_Hotel_Cancel">
 <copy>
 <from variable="Invoke_Hotel_HotelBook_OutputVariable"
 part="payload"
 query="/ns1:processResponse/ns1:ConformationCode"/>
 <to variable="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
 part="payload"
 query="/ns1:CancelRequest/ns1:ConfirmationCode"/>
 </copy>
 </assign>
 <invoke name="Invoke_Hotel_Cancel"
 inputVariable="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
 outputVariable="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
 partnerLink="Hotel_Service" portType="ns1:HotelBooking"
 operation="HotelCancel" bpelx:invokeAsDetail="no"/>
 <assign name="Assign4">
 <copy>
 <from variable="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
 part="payload" query="/ns1:CancelResponse/ns1:Status"/>
 <to variable="outputVariable" part="payload"
 query="/client:processResponse/client:Status"/>
 </copy>
 </assign>
 </sequence>
 </compensationHandler>
 <sequence name="Sequence3">
 <assign name="Assign_Hotel">
 <copy>
 <from variable="inputVariable" part="payload"
 query="/client:process/client:HotelName"/>
 <to variable="Invoke_Hotel_HotelBook_InputVariable"
 part="payload" query="/ns1:BookingRequest/ns1:HotelName"/>
 </copy>
 <copy>
 <from variable="inputVariable" part="payload"
 query="/client:process/client:CustomerName"/>
 <to variable="Invoke_Hotel_HotelBook_InputVariable"
 part="payload" query="/ns1:BookingRequest/ns1:PersonName"/>
 </copy>
 </assign>
 <invoke name="Invoke_Hotel"
 inputVariable="Invoke_Hotel_HotelBook_InputVariable"
 outputVariable="Invoke_Hotel_HotelBook_OutputVariable"
 partnerLink="Hotel_Service" portType="ns1:HotelBooking"
 operation="HotelBook" bpelx:invokeAsDetail="no"/>
 <assign name="Assign3">
 <copy>
 <from variable="Invoke_Hotel_HotelBook_OutputVariable"
 part="payload" query="/ns1:processResponse/ns1:Status"/>
 <to variable="outputVariable" part="payload"
 query="/client:processResponse/client:Status"/>
 </copy>
 </assign>
 </sequence>
 </scope>
 </sequence>
 </flow>
 <throw name="Throw1" faultName="bpelx:remoteFault"
 faultVariable="FaultVar_1"/>
 
 <reply name="replyOutput" partnerLink="travlmgmt_client"
 portType="client:TravlMgmt" operation="process"
 variable="outputVariable"/>
</sequence>
</process>

by manually specifying the scope name in the compensation activity it is solved

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

Not able to see hierarchial org structure by clicking on Expand this branch

Dear experts,
I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
Regards
HKishan

Dear Luke,
I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
Is there any specific step that needs to be done to see these branches.
By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
Regards
Hkishan

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

Not able to see the request in ODS to activate

Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.

Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer Date Range in the Request Display (lower right).
--Jkyle

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to see the result in particular column of BPC report

Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
Anukul

Hello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K

Soap adapter not able to see payload

Similar Messages

Maybe you are looking for