SOAP: call failed: java.io.IOException: unable to create a socket ??

Hi
I am getting the following error in PI for one of my sync interfaces.
SOAP: call failed: java.io.IOException: unable to create a socket
The interface works most of the time, but i get this error couple of times a day.
Regards,
XIer

Hav you able to resolve this issue? Please let me know what was cause of this "unable to create a socket"
Thanks,
Sagar

Similar Messages

Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK

Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
Jitender

HI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen.

SOAP: call failed: java.io.IOException

Hi gurus,
I was executing several stress-tests for an interface between to non-SAP systems over PI, that both use async SOAP adapter communication.
The requirement is to transfer up to 70mb files with single files. I executed the tests successfully with a 50MB message size and lower, and then I tried with a 70MB message, but the message failed and got this error in the adapter log:
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
I also checked the messaging system configuration settings in the AS Java but could not find anythig related to the SOAP adapter.
Thanks in advance.
Regards,
S. Gökhan TOPÇ

Hi Gokhan,
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
I believe this is a client-side error, as your request was not properly addressed and the SOAP service was not reached.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
Well, SAP's message size limit is huge but a lot depends on your receiving server's capabilities and network connections. So, you might not be able to reach the SAP's tested message size. In my project, I am able to do a max of 55 megs through SOAP.
Hope this helps.
regards,
Neetesh

SOAP Receiver java.io.IOException: unable to create a socket

Hi All,
I have scenario where i invoke a external webservice (over internet) using SOAP adapter. I can reach the external target as they see my traffic on firewall but i always get:
com.sap.aii.af.ra.ms.api.DeliveryException: java.io.IOException: unable to create a socket
I cannot find any logs which provide more information on this. I have imported all the clients certificates into my J2EE keystore (webservice is over HTTPS). Any suggestions on where better logs can be found would be appreciated. So far checked RWB and the default trace log.
Since my certificates arent in ABAP stack I cant use SM59 to test. I have used test tool like soapUI and can invoke the web service (although on different network to my XI server) so not sure why XI is failing
Any suggestions would be greatly appreciated!
Sorry forgot to mention - The error its self i suspect is firewall and will need to get network people to look at but any information on how to debug errors like this on J2EE side would be appreciated - is there a J2EE version of SM59?
Message was edited by:
Chris Mills

Hi Chris,
Check this thread..
SOAP Adapter: java.io.IOException: unable to create a socket
cheers,
Prashanth
P.S Please mark helpful answers

SOAP Adapter: java.io.IOException: unable to create a socket

Hi,
I am trying to use the soap adapter to connect to a URL and post a document. When I try, the adapter throws the following
java.io.IOException: unable to create a socket
Does anyone know what causes this?
I get it both with the SOAP Envelope turned on and off.
I am trying to post to a URL that is usually used for straight HTTPS posts, could this cause an issue? The only reason we are using the SOAP adapter is to be able to send attachments! Hence, SOAP adapter, no SOAP envelope.
Kind Regard,
Chris

Hi,
Had faced the same issue. The possible reasons were :
1. Either the target server might not be responding.
2. The Target URL configured in the communication channel might be wrong.
3. The port to which the message is being sent might not be opened which you need to cross-verify.
For me the issue was the port, which wasn't enabled from our end. The messages went past successfully once it was enabled.
Cheers!!
Jithin James.

SOAP: call failed: java.lang.NullPointerException

Hi,
We are geeting the error in RWB -->
SOAP: call failed: java.lang.NullPointerException
We checked the communication channel and interface and all are working fine.
Can anybody suggest?
Regards,
Akki..................

Hi,
use this link to find the answer..
SOAP adapter
Regards,
Amitanshu

SOAP: call failed: java.io.EOFException

Hi all,
I have build a proxy to soap scenario that generates errors during runtime. The scenario
consists of an ABAP program consuming a webservice through PI. The communication
channel shows the following errorlog:
- Message processing started
- request entering
- SOAP: call failed: java.io.EOFException: Connection closed by remote host.
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.
MessagingException: java.io.EOFException: Connection closed by remote host.
Does anyone know the cause of this error?
Thanks in advance.
Regards,
Ivo

Hi Ravi,
although I was able to reach the URL through a webbrowser, this problem was indeed caused by unavailability of the webservice. I just tried the connection without making any changes in PI and everything is working fine now.
Case closed.
Regards,
Ivo

SOAP: call failed: java.io.EOFException: Connection closed by remote host

Hi folks,
my friday crusher:
We have a sync RFC-PI-SOAP scenario.
All is working fine in Dev system.
After moving into Test following error is displayed as the SOAP response message:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also Channel Monitoring says:
Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.
Couldn´t find any hints in SDN and the web to this issue.
Does anyone of you has made experiences with that problem?
Maybe it´s a system parameter for time out SOAP connections....?
Many thanks for your help
-and-
have a great weekend!
Cheers
André

Very strange!
But I have the solution:
I have looked into channel monitoring / RWB again.
There I saw, this PI is using two clusters on two application servers.
Everytime the SOAP call is executed through the frist cluster, all was fine.
But no SOAP call was successfully executed by the second cluster.
Fortuity? No!
The second cluster node / app server wasn´t registered for internet access in the used proxy server.
So it wasn´t an PI issue.
Now, all is fine & I´m happy!
Thanks @all for helping!
Cheers,
André

SOAP unable to create a socket after OS upgrade OS/400 V5R4 to V7R1

Hello,
after we upgraded our OS from System i V5R4 to V7R1 we have problems with our SOAP adapters.
In the runtime workbench and also in the SXMB_MONI the following error occured:
SOAP: call failed: java.io.IOException: unable to create a socket
Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
Before the OS upgrade the adapter rans without any errors and we tested the connection to the partner
with an system running V5R4 with success. So it seems to be an error that came with the OS upgrade.
Any idea? Had any one the same error after migration to V7R1? Thanks for your help.
Best regards,
Matthias

Hello,
we found out that the error is attached to DNS and Java stack. Our ABAP stack can set the url to the correct IP adress, if we configure a entry in SM59. Also the java stack calls our partner over SOAP with IP adress, but not with url. The urls are stored in the local host table, so we suppose that the java stack doesn't use the local dns table and doesn't ask our dns server for the right ip adress.
Does anybody know this issue? The only change we did is upgrade OS/400 from V4R4 to V7R1. If a mod see this, I think it make sence to move this thread into the forum SAP on DB2 UDB for i5/OS (DB4). Thank's.
Matthias

Unable to create a socket

We are trying to receive an XML file from a partner (with SSL) through our PI system. About half of the files we receive during the day succeed normally. The other half fail with the following messages:
In CC monitor:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: unable to create a socket: java.io.IOException: unable to create a socket
SOAP: call failed: java.io.IOException: unable to create a socket
and in SXMB_MONI
com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket
Does anyone know why this could be happening to only some of the files and not others when all other things are the same?

Hi Blake Haan,
I faced some times this issue.As of my analysis, It is various downtimes from your target system or error in your server. So might be that reason,These type of exceptions are came.
My suggestion is please resend these message from RWB-->Message Monitoring, Before that please check with your target sever support persons.
And please take some time to resend it those messages which are failed.
Thanks,
Sateesh

Receiver SOAP channel error: Communication over HTTPS. Unable to create a socket

Hi,
I am getting following error while sending message from PI (7.1) to SalesForce system:
'SOAP: call failed: java.io.IOException: Communication over HTTPS. Unable to create a socket'
Scenario: Sending Customer data from SAP via Async proxy to PI which is sent further to SalesForce system via SOAP webservice call.
When I am trying to Post data to the same webservice via SOAP UI it is working fine and data is getting updated in SalesForce system.
XPI inspector logs for the channel suggest the following:
client [103965] RequestImpl.initSslAttributes(): Initially sslAttributes = null
client [103965] RequestImpl.initSslAttributes(): Cannot find SSL headers in the request.
client [103965] RequestImpl.initSslAttributes(): No SSL attributes: not found in headers and not searched in FCA, because connection.isSecure() = false; sslAttributes = null
I have checked the following SAP Note and requested for updation of SSL icm parameters
891877 - Message-specific configuration of HTTP-Security
I checked the following discussions:
http://scn.sap.com/message/8910518#8910518
http://scn.sap.com/message/6244674#6244674
http://scn.sap.com/thread/2100000
http://scn.sap.com/thread/1632114
which are suggesting a different approach. Kindly suggest a way forward.
Thanks,
Vishwajeet

This is related network issue.
Did you do telnet in pi server with target system ip and port?
If you use https then you need to install certificates.
Check below threads
http://scn.sap.com/thread/190299
Unable to create socket error

DeliveryException: unable to create a socket

Hi,
We are using the Proxy-> XI -> SOAP scenario(Synchronus). I am able to see that the request message mapping has transformed the message in to the required format. But, when it is calling the SOAP adapter it is giving com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket error. Can any one help us in knowing
what exactly is the problem. We have used 'Do not use SOAP envelop' option in the SOAP receiver adapter.
Thanks And Regards
Sripathi G Yogesh

hi,
you can refer to thread for your issue
Re: SOAP Adapter: java.io.IOException: unable to create a socket
regards,
ujjwal kumar

Mail sender Adapter error: unable to create a socket

Hi,
I got the following error in CC - mail adapter:
exception caught during processing mail message; java.io.IOException: unable to create a socket
both for pops and imaps protocols
I could not find answers to how to fix it.Any help will be appreciated.
Are there any other logs,trace to get more info about the error?
Thank you.

Hi Rinku,
I checked the mail server url, acoount and password , if this was what you ment. I also read the wiki. It's a good one but describes simple pop and imap protocols.
I still have the same error message and I am using imaps and pops. I've read in forum post that I need to to implement (import) "SAP Cryptographic toolkit" and import a certificate to ABAP and Java part of XI.
Link: [Error in a Mail Adapter;
Do you know how to do it? ( I am new to XI)
Thank you for your help.
Nataliya

Java.io.IOException: unable to find the type mapping resource file

Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

SOAP Receiver adapter error. SOAP CALL Failed

Hi ,
I am implementing scenario R/3->RFC adapter->XI->SOAP REceiver adapter->Web Service (Synchronous). I am getting the error.
SOAP: call failed
SOAP: error occured: java.net.ConnectException: Connection timed out
Message log is as below.
Any clue ?
Thanks & Regards,
Mathew
2005-10-31 18:59:58
Success
output
1130810398454
The message was successfully received by the messaging system. Profile: XI URL: http://host:Port/MessagingSystem/receive/AFW/XI
2005-10-31 18:59:58
Success
output
1130810398458
Using connection AFW. Trying to put the message into the request queue.
2005-10-31 18:59:58
Success
output
1130810398458
Message successfully put into the queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message was successfully retrieved from the request queue.
2005-10-31 18:59:58
Success
output
1130810398459
The message status set to DLNG.
2005-10-31 18:59:58
Success
output
1130810398460
Delivering to channel: CC_CALCULATOR
2005-10-31 18:59:58
Success
output
1130810398564
SOAP: request message entering the adapter
2005-10-31 19:03:07
Success
output
1130810587497
SOAP: call failed
2005-10-31 19:03:07
Error
output
1130810587497
SOAP: error occured: java.net.ConnectException: Connection timed out
2005-10-31 19:03:07
Error
output
1130810587498
Exception caught by adapter framework: Connection timed out

Hi Mathew,
Check if the webservice is availble??? Based on the error below, it looks like the message is timing out at the Adapter Engine level waiting for the connection to make the webservice call...
Prasad

SOAP: call failed: java.io.IOException: unable to create a socket ??

Similar Messages

Maybe you are looking for