SOAP error "Unicode supplemental characters encountered in parameter"..!!

Hi All,
Scenario: Webservice (SOAP)--> XI --> SAP
We are facing some problem with chinese characters while sending the soap call.
The webservice receiving error in the Soap fault as
" FAILED TO INVOKE WEB SERVICE OPERATION OS_Sales Could not call Web service operation OS_Sales. Unicode supplemental characters encountered in parameter 1 (11839)".
Is there any where I can get rid of this?
Thanks
Deepthi

Hi,
try this - find the character encoding of your chinese characters.......for this take the data and view it in internet explorer and then from menu view - encoding see the encoding used to view it properly....or you can ask your SOAP application guys the character encoding of your chinese characters......
Then in sender SOAP comm channel, in module tab, add the following in module configuration section:
Module Key Parameter.name Parameter.value
soap XMBWS.XMLEncoding <your_encoding>
where <your_encoding> is the encoding scheme of your chinese characters something like iso-<some_number>
Then rerun your scenario.
Regards,
Rajeev Gupta

Similar Messages

SOAP error!! while activating or running an existing Adobe form

Hi,
I am working on Adobe forms in ECC6.0 server.
I am getting a SOAP error while I run existing forms or trying activating a Z* form.
Error: ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)
I am trying to run an existing form in 800 client. It is running fine in 001 client.
ADS installed on 001 client but basis team is not able install it on 800 client.
How to install ADS on 800 client also. Is it a problem with ADS installation??
Thanks in advance.
Thanks,
Sreekanth Gollamudi

Pradeep,
You are right. This time I could bind the context from my interface (even though it was ABAP based).
I have one quick one for you - you mentioned earlier that when we embed an existing form into Web. View, we cannot have an Interactive form even when we check the 'enabled' property. Can you throw more light onto this pls?
The runtime error that i am encountering now says :
Adobe Processing Exception: PDF is not interactive. Data can be only imported into Interactive forms.
the source text of error is:
get result
m_pdf_object->get_document ( importing pdfdata = pdf ).
catch cx_fp_exception into lr_fpexc.
raise exception type cx_wd_general
exporting
previous = lr_fpexc
and this exception is not caught ! I am still lost
thanks again for your help!
Liz

Error Null Databinding context encountered -WSDL to Java webservice convert

HI,
I have been trying to generate service and client from WSDL using Jdeveloper11 and im unable to progress on this particular WSDL, i was succesfull in creating the client and service for a sample Apache WSDL using the Jdeveloper. If anyone can point out the issue in this WSDL or is there a bug in Jdeveloper when handling complex type? i attach the WSDL that i used, now note that the WSDL calls for another WSDL import witin it, if i comment out the import and its bindings im able to proceed,
WSDL-1

<wsdl:operation name="getAlarmsByKeys">
<wsdl:input name="getAlarmsByKeysRequest" message="fmWS-v1-0:getAlarmsByKeysRequest" />
<wsdl:output name="getAlarmsByKeysResponse" message="fmWS-v1-0:getAlarmsByKeysResponse" />
<wsdl:fault name="getAlarmsByKeysException" message="fmWS-v1-0:getAlarmsByKeysException" />
</wsdl:operation>
<wsdl:operation name="getAlarmsByTemplate">
<wsdl:input name="getAlarmsByTemplateRequest" message="fmWS-v1-0:getAlarmsByTemplateRequest" />
<wsdl:output name="getAlarmsByTemplateResponse" message="fmWS-v1-0:getAlarmsByTemplateResponse" />
<wsdl:fault name="getAlarmsByTemplateException" message="fmWS-v1-0:getAlarmsByTemplateException" />
</wsdl:operation>
<wsdl:operation name="queryAlarms">
<wsdl:input name="queryAlarmsRequest" message="fmWS-v1-0:queryAlarmsRequest" />
<wsdl:output name="queryAlarmsResponse" message="fmWS-v1-0:queryAlarmsResponse" />
<wsdl:fault name="queryAlarmsException" message="fmWS-v1-0:queryAlarmsException" />
</wsdl:operation>

<wsdl:operation name="getAlarmSpecificInfoTypes">
<wsdl:input
name="getAlarmSpecificInfoTypesRequest"
message="fmWS-v1-0:getAlarmSpecificInfoTypesRequest" />
<wsdl:output
name="getAlarmSpecificInfoTypesResponse"
message="fmWS-v1-0:getAlarmSpecificInfoTypesResponse" />
<wsdl:fault
name="getAlarmSpecificInfoTypesException"
message="fmWS-v1-0:getAlarmSpecificInfoTypesException" />
</wsdl:operation>
<wsdl:operation name="getVersion">
<wsdl:input
name="getVersionRequest"
message="fmWS-v1-0:getVersionRequest" />
<wsdl:output
name="getVersionResponse"
message="fmWS-v1-0:getVersionResponse" />
<wsdl:fault
name="getVersionException"
message="fmWS-v1-0:getVersionException" />
</wsdl:operation>
<wsdl:operation name="createAlarms">
<wsdl:input
name="createAlarmsRequest"
message="fmWS-v1-0:createAlarmsRequest" />
<wsdl:output
name="createAlarmsResponse"
message="fmWS-v1-0:createAlarmsResponse" />
<wsdl:fault
name="createAlarmsException"
message="fmWS-v1-0:createAlarmsException" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="JVTAlarmCreationSessionSoapBinding"
type="fmWS-v1-0:JVTAlarmCreationSessionWSPort">
<soap:binding style="document"
transport="http://schemas.xmlsoap.org/soap/http" />

<wsdl:operation name="getAlarmsByKeys">
<soap:operation soapAction="getAlarmsByKeys" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name="getAlarmsByKeysException">
<soap:fault name="getAlarmsByKeysException" use="literal" />
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getAlarmsByTemplate">
<soap:operation soapAction="getAlarmsByTemplate" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name="getAlarmsByTemplateException">
<soap:fault name="getAlarmsByTemplateException" use="literal" />
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="queryAlarms">
<soap:operation soapAction="queryAlarms" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name="queryAlarmsException">
<soap:fault name="queryAlarmsException" use="literal" />
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getAlarmSpecificInfoTypes">
<soap:operation soapAction="getAlarmSpecificInfoTypes" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name ="getAlarmSpecificInfoTypesException">
<soap:fault name ="getAlarmSpecificInfoTypesException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getVersion">
<soap:operation soapAction="getVersion" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name ="getVersionException">
<soap:fault name ="getVersionException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="createAlarms">
<soap:operation soapAction="createAlarms" style="document" />
<wsdl:input>
<soap:body parts="parameters" use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body parts="parameters" use="literal" />
</wsdl:output>
<wsdl:fault name ="createAlarmsException">
<soap:fault name ="createAlarmsException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>








<wsdl:service name="JVTAlarmCreationSessionWebService">
<wsdl:port name="JVTAlarmCreationSessionWSPort"
binding="fmWS-v1-0:JVTAlarmCreationSessionSoapBinding">
<soap:address location="http://localhost/JVTAlarmCreationSessionWebService/JVTAlarmCreationSession" />
</wsdl:port>

</wsdl:service>
</wsdl:definitions>
WSDL-2 imported in the above WSDL
<?xml version="1.0" encoding="utf-8"?>

<wsdl:definitions name="WS-BaseNotification"
targetNamespace="http://docs.oasis-open.org/wsn/bw-2"
xmlns:wsntw="http://docs.oasis-open.org/wsn/bw-2"
xmlns:wsnt="http://docs.oasis-open.org/wsn/b-2"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:wsrf-rw="http://docs.oasis-open.org/wsrf/rw-2"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">

<wsdl:import
namespace="http://docs.oasis-open.org/wsrf/rw-2"
location="rw-2.wsdl"/>

<wsdl:types>
<xsd:schema elementFormDefault="qualified">
<xsd:import
namespace="http://docs.oasis-open.org/wsn/b-2"
schemaLocation="b-2.xsd"/>
</xsd:schema>
</wsdl:types>

<wsdl:message name="Notify">
<wsdl:part name="Notify" element="wsnt:Notify"/>
</wsdl:message>

<wsdl:message name="SubscribeRequest" >
<wsdl:part name="SubscribeRequest"
element="wsnt:Subscribe"/>
</wsdl:message>
<wsdl:message name="SubscribeResponse">
<wsdl:part name="SubscribeResponse"
element="wsnt:SubscribeResponse"/>
</wsdl:message>
<wsdl:message name="SubscribeCreationFailedFault">
<wsdl:part name="SubscribeCreationFailedFault"
element="wsnt:SubscribeCreationFailedFault" />
</wsdl:message>
<wsdl:message name="TopicExpressionDialectUnknownFault">
<wsdl:part name="TopicExpressionDialectUnknownFault"
element="wsnt:TopicExpressionDialectUnknownFault" />
</wsdl:message>
<wsdl:message name="InvalidFilterFault">
<wsdl:part name="InvalidFilterFault"
element="wsnt:InvalidFilterFault" />
</wsdl:message>
<wsdl:message name="InvalidProducerPropertiesExpressionFault">
<wsdl:part name="InvalidProducerPropertiesExpressionFault"
element="wsnt:InvalidProducerPropertiesExpressionFault" />
</wsdl:message>
<wsdl:message name="InvalidMessageContentExpressionFault">
<wsdl:part name="InvalidMessageContentExpressionFault"
element="wsnt:InvalidMessageContentExpressionFault" />
</wsdl:message>
<wsdl:message name="UnrecognizedPolicyRequestFault">
<wsdl:part name="UnrecognizedPolicyRequestFault"
element="wsnt:UnrecognizedPolicyRequestFault" />
</wsdl:message>
<wsdl:message name="UnsupportedPolicyRequestFault">
<wsdl:part name="UnsupportedPolicyRequestFault"
element="wsnt:UnsupportedPolicyRequestFault" />
</wsdl:message>
<wsdl:message name="NotifyMessageNotSupportedFault">
<wsdl:part name="NotifyMessageNotSupportedFault"
element="wsnt:NotifyMessageNotSupportedFault" />
</wsdl:message>
<wsdl:message name="UnacceptableInitialTerminationTimeFault">
<wsdl:part name="UnacceptableInitialTerminationTimeFault"
element="wsnt:UnacceptableInitialTerminationTimeFault"/>
</wsdl:message>

<wsdl:message name="GetCurrentMessageRequest">
<wsdl:part name="GetCurrentMessageRequest"
element="wsnt:GetCurrentMessage"/>
</wsdl:message>
<wsdl:message name="GetCurrentMessageResponse">
<wsdl:part name="GetCurrentMessageResponse"
element="wsnt:GetCurrentMessageResponse"/>
</wsdl:message>
<wsdl:message name="InvalidTopicExpressionFault">
<wsdl:part name="InvalidTopicExpressionFault"
element="wsnt:InvalidTopicExpressionFault" />
</wsdl:message>
<wsdl:message name="TopicNotSupportedFault">
<wsdl:part name="TopicNotSupportedFault"
element="wsnt:TopicNotSupportedFault" />
</wsdl:message>
<wsdl:message name="MultipleTopicsSpecifiedFault">
<wsdl:part name="MultipleTopicsSpecifiedFault"
element="wsnt:MultipleTopicsSpecifiedFault" />
</wsdl:message>
<wsdl:message name="NoCurrentMessageOnTopicFault">
<wsdl:part name="NoCurrentMessageOnTopicFault"
element="wsnt:NoCurrentMessageOnTopicFault" />
</wsdl:message>

<wsdl:message name="GetMessagesRequest">
<wsdl:part name="GetMessagesRequest"
element="wsnt:GetMessages"/>
</wsdl:message>
<wsdl:message name="GetMessagesResponse">
<wsdl:part name="GetMessagesResponse"
element="wsnt:GetMessagesResponse"/>
</wsdl:message>
<wsdl:message name="UnableToGetMessagesFault">
<wsdl:part name="UnableToGetMessagesFault"
element="wsnt:UnableToGetMessagesFault"/>
</wsdl:message>

<wsdl:message name="DestroyPullPointRequest">
<wsdl:part name="DestroyPullPointRequest"
element="wsnt:DestroyPullPoint"/>
</wsdl:message>
<wsdl:message name="DestroyPullPointResponse">
<wsdl:part name="DestroyPullPointResponse"
element="wsnt:DestroyPullPointResponse"/>
</wsdl:message>
<wsdl:message name="UnableToDestroyPullPointFault">
<wsdl:part name="UnableToDestroyPullPointFault"
element="wsnt:UnableToDestroyPullPointFault"/>
</wsdl:message>

<wsdl:message name="CreatePullPointRequest">
<wsdl:part name="CreatePullPointRequest"
element="wsnt:CreatePullPoint"/>
</wsdl:message>
<wsdl:message name="CreatePullPointResponse">
<wsdl:part name="CreatePullPointResponse"
element="wsnt:CreatePullPointResponse"/>
</wsdl:message>
<wsdl:message name="UnableToCreatePullPointFault">
<wsdl:part name="UnableToCreatePullPointFault"
element="wsnt:UnableToCreatePullPointFault"/>
</wsdl:message>

<wsdl:message name="RenewRequest">
<wsdl:part name="RenewRequest"
element="wsnt:Renew"/>
</wsdl:message>
<wsdl:message name="RenewResponse">
<wsdl:part name="RenewResponse"
element="wsnt:RenewResponse"/>
</wsdl:message>
<wsdl:message name="UnacceptableTerminationTimeFault">
<wsdl:part name="UnacceptableTerminationTimeFault"
element="wsnt:UnacceptableTerminationTimeFault" />
</wsdl:message>

<wsdl:message name="UnsubscribeRequest">
<wsdl:part name="UnsubscribeRequest"
element="wsnt:Unsubscribe"/>
</wsdl:message>
<wsdl:message name="UnsubscribeResponse">
<wsdl:part name="UnsubscribeResponse"
element="wsnt:UnsubscribeResponse"/>
</wsdl:message>
<wsdl:message name="UnableToDestroySubscriptionFault">
<wsdl:part name="UnableToDestroySubscriptionFault"
element="wsnt:UnableToDestroySubscriptionFault" />
</wsdl:message>

<wsdl:message name="PauseSubscriptionRequest">
<wsdl:part name="PauseSubscriptionRequest"
element="wsnt:PauseSubscription"/>
</wsdl:message>
<wsdl:message name="PauseSubscriptionResponse">
<wsdl:part name="PauseSubscriptionResponse"
element="wsnt:PauseSubscriptionResponse"/>
</wsdl:message>
<wsdl:message name="PauseFailedFault">
<wsdl:part name="PauseFailedFault"
element="wsnt:PauseFailedFault" />
</wsdl:message>

<wsdl:message name="ResumeSubscriptionRequest">
<wsdl:part name="ResumeSubscriptionRequest"
element="wsnt:ResumeSubscription"/>
</wsdl:message>
<wsdl:message name="ResumeSubscriptionResponse">
<wsdl:part name="ResumeSubscriptionResponse"
element="wsnt:ResumeSubscriptionResponse"/>
</wsdl:message>
<wsdl:message name="ResumeFailedFault">
<wsdl:part name="ResumeFailedFault"
element="wsnt:ResumeFailedFault" />
</wsdl:message>


<wsdl:portType name="NotificationConsumer">
<wsdl:operation name="Notify">
<wsdl:input message="wsntw:Notify" />
</wsdl:operation>
</wsdl:portType>

<wsdl:portType name="NotificationProducer">
<wsdl:operation name="Subscribe">
<wsdl:input message="wsntw:SubscribeRequest" />
<wsdl:output message="wsntw:SubscribeResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="InvalidFilterFault"
message="wsntw:InvalidFilterFault"/>
<wsdl:fault name="TopicExpressionDialectUnknownFault"
message="wsntw:TopicExpressionDialectUnknownFault"/>
<wsdl:fault name="InvalidTopicExpressionFault"
message="wsntw:InvalidTopicExpressionFault" />
<wsdl:fault name="TopicNotSupportedFault"
message="wsntw:TopicNotSupportedFault" />
<wsdl:fault name="InvalidProducerPropertiesExpressionFault"
message="wsntw:InvalidProducerPropertiesExpressionFault"/>
<wsdl:fault name="InvalidMessageContentExpressionFault"
message="wsntw:InvalidMessageContentExpressionFault"/>
<wsdl:fault name="UnacceptableInitialTerminationTimeFault"
message="wsntw:UnacceptableInitialTerminationTimeFault"/>
<wsdl:fault name="UnrecognizedPolicyRequestFault"
message="wsntw:UnrecognizedPolicyRequestFault"/>
<wsdl:fault name="UnsupportedPolicyRequestFault"
message="wsntw:UnsupportedPolicyRequestFault"/>
<wsdl:fault name="NotifyMessageNotSupportedFault"
message="wsntw:NotifyMessageNotSupportedFault"/>
<wsdl:fault name="SubscribeCreationFailedFault"
message="wsntw:SubscribeCreationFailedFault"/>
</wsdl:operation>
<wsdl:operation name="GetCurrentMessage">
<wsdl:input message="wsntw:GetCurrentMessageRequest"/>
<wsdl:output message="wsntw:GetCurrentMessageResponse"/>
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="TopicExpressionDialectUnknownFault"
message="wsntw:TopicExpressionDialectUnknownFault"/>
<wsdl:fault name="InvalidTopicExpressionFault"
message="wsntw:InvalidTopicExpressionFault" />
<wsdl:fault name="TopicNotSupportedFault"
message="wsntw:TopicNotSupportedFault" />
<wsdl:fault name="NoCurrentMessageOnTopicFault"
message="wsntw:NoCurrentMessageOnTopicFault" />
<wsdl:fault name="MultipleTopicsSpecifiedFault"
message="wsntw:MultipleTopicsSpecifiedFault" />
</wsdl:operation>
</wsdl:portType>

<wsdl:portType name="PullPoint">
<wsdl:operation name="GetMessages">
<wsdl:input name="GetMessagesRequest"
message="wsntw:GetMessagesRequest" />
<wsdl:output name="GetMessagesResponse"
message="wsntw:GetMessagesResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="UnableToGetMessagesFault"
message="wsntw:UnableToGetMessagesFault" />
</wsdl:operation>
<wsdl:operation name="DestroyPullPoint">
<wsdl:input name="DestroyPullPointRequest"
message="wsntw:DestroyPullPointRequest" />
<wsdl:output name="DestroyPullPointResponse"
message="wsntw:DestroyPullPointResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault"/>
<wsdl:fault name="UnableToDestroyPullPointFault"
message="wsntw:UnableToDestroyPullPointFault" />
</wsdl:operation>
<wsdl:operation name="Notify">
<wsdl:input message="wsntw:Notify"/>
</wsdl:operation>
</wsdl:portType>

<wsdl:portType name="CreatePullPoint">
<wsdl:operation name="CreatePullPoint">
<wsdl:input name="CreatePullPointRequest"
message="wsntw:CreatePullPointRequest" />
<wsdl:output name="CreatePullPointResponse"
message="wsntw:CreatePullPointResponse" />
<wsdl:fault name="UnableToCreatePullPointFault"
message="wsntw:UnableToCreatePullPointFault" />
</wsdl:operation>
</wsdl:portType>

<wsdl:portType name="SubscriptionManager">
<wsdl:operation name="Renew">
<wsdl:input name="RenewRequest"
message="wsntw:RenewRequest" />
<wsdl:output name="RenewResponse"
message="wsntw:RenewResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="UnacceptableTerminationTimeFault"
message=
"wsntw:UnacceptableTerminationTimeFault" />
</wsdl:operation>
<wsdl:operation name="Unsubscribe">
<wsdl:input name="UnsubscribeRequest"
message="wsntw:UnsubscribeRequest" />
<wsdl:output name="UnsubscribeResponse"
message="wsntw:UnsubscribeResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="UnableToDestroySubscriptionFault"
message=
"wsntw:UnableToDestroySubscriptionFault" />
</wsdl:operation>
</wsdl:portType>

<wsdl:portType name="PausableSubscriptionManager">

<wsdl:operation name="Renew">
<wsdl:input name="RenewRequest"
message="wsntw:RenewRequest" />
<wsdl:output name="RenewResponse"
message="wsntw:RenewResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="UnacceptableTerminationTimeFault"
message=
"wsntw:UnacceptableTerminationTimeFault" />
</wsdl:operation>
<wsdl:operation name="Unsubscribe">
<wsdl:input name="UnsubscribeRequest"
message="wsntw:UnsubscribeRequest" />
<wsdl:output name="UnsubscribeResponse"
message="wsntw:UnsubscribeResponse" />
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="UnableToDestroySubscriptionFault"
message=
"wsntw:UnableToDestroySubscriptionFault" />
</wsdl:operation>

<wsdl:operation name="PauseSubscription">
<wsdl:input message="wsntw:PauseSubscriptionRequest"/>
<wsdl:output message="wsntw:PauseSubscriptionResponse"/>
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="PauseFailedFault"
message="wsntw:PauseFailedFault" />
</wsdl:operation>
<wsdl:operation name="ResumeSubscription">
<wsdl:input message="wsntw:ResumeSubscriptionRequest"/>
<wsdl:output message="wsntw:ResumeSubscriptionResponse"/>
<wsdl:fault name="ResourceUnknownFault"
message="wsrf-rw:ResourceUnknownFault" />
<wsdl:fault name="ResumeFailedFault"
message="wsntw:ResumeFailedFault" />
</wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
And the error i get is [fatal error] null databinding context encountered when creating service.
Steps i followed:
1. Created a new project in Jdev
2. Right clicked on project to expand Business Tier - Web Services nodes. Selected the Java web Service from WSDL.
3. Selected WSDL to convert
---Says it is Fetching WSDL
---then says building model
--and pops error : [fatal error] null databinding context encountered.
Any suggestions? I'm unable to get this issue fixed for a long time.

Hey guys,
I couldnt get this fixed in jdeveloper, i finally gave up on using Jdeveloper for Web service creation.
I went back to my eclipse3.2.2 and used the Eclipse WTP 1.5.4 and guess what, it had no issues generating the service and client for my WSDL.
I am not sure Jdeveloper can compete with Eclipse functionality and ease.

How to view body of SOAP error (in Java)

I'm trying to track down the source of a "Server" error I keep getting back when trying to invoke Web Services from Java code. I can't figure out how to view my SOAP response to get the details of the error message. So all I have to work with now is "javax.xml.rpc.soap.SOAPFaultException: Server". I created the Web Service endpoint in JDeveloper by loading the .wsdl file and selecting "Generate Web Service Proxy" - So I can't view my SOAP message/response - I just call the 'accountInsertOrUpdate' method.
Should I expect the SOAP body to have a more detailed error as to what is causing the 'Server' error?
Does anybody know of a method where I can view the SOAP body being sent out and received?
I consistently get this Server error when trying to call any Oracle CRM On Demand method (about 2-3 times in a row) and then the method call works fine - no changes on my side (it is just in a loop to retry if a Server error is encountered). (If I view the Web Service Utilization in CRM On Demand - it doesn't show any of the 'Server' errors - only the successful login, method call, and logout.
Any ideas would be greatly appreciated - Thanks!
Brian

I just figured out how to view the body of the SOAP error. (I just needed to cast the Exception as a SOAPFaultException to view the details).
This is the error I consistently get: Internal Error: Session is not available. Aborting. (SBL-ODU-01006)
So now my question - has anybody else run into this?
I log in - get my session id. Try to call a method and get (2 or 3 times in a row) this 'Session not available' error and then it works. I try and make another method call and get 2 or 3 more 'Session not available' errors.
I thought it might be a timing issue (where I am making too many requests/second) so I added a little 'sleep' time between method calls with no difference in response.
Ideas?

SOAP: error occured: java.io.IOException: invalid content type for SOAP: TE

Hi,
We are implementing an XI scenario as follows: Mail Adapter->XI->SOAP Receiver.
Basically, we pass the XML File attachment from the Mail Adapter through XI to the SOAP Adapter. However, we keep getting the following error:
SOAP: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Any ideas on where we could look to fix this problem?
Thanks,
EC

People,
most of errors like that are 401 (unauthorized), 403 (forbidden), 404 (not found) and so on. To be sure, check the message content that comes back from the webservice, in the Message Monitoring.
Obs: To visualize sync messages payload in Message Monitoring, you'll have to set the Messaging.syncMessageRemover.removebody parameter to false (default is true) in SAP XI AF Messaging service, in the Visual Administrator.
Regards,
Henrique.

Validator error - Extra data was encountered.

Hi All,
I am working on Outbound EDI870, getting below Error:
2010.06.03 at 04:33:34:988: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (ERROR) Error -: B2B-51505: General validation error.
 at oracle.tip.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2539)
 at oracle.tip.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1279)
 at oracle.tip.b2b.msgproc.Request.outgoingRequest(Request.java:790)
 at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1201)
 at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:713)
 at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:2754)
 at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2444)
 at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:464)
 at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:180)
 at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:77)
 at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:171)
 at java.lang.Thread.run(Thread.java:619)
2010.06.03 at 04:33:34:988: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) Engine: processOutgoingMessageImpl: B2BDomainException
2010.06.03 at 04:33:34:988: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: B2B-51505: General validation error.
2010.06.03 at 04:33:34:988: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) DbAccess:updateWireBusinessToErrorState
2010.06.03 at 04:33:34:988: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.06.03 at 04:33:34:989: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Enter
2010.06.03 at 04:33:34:989: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Got RTP Context
2010.06.03 at 04:33:35:006: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Got 1messages for field messageId with value 1410017
2010.06.03 at 04:33:35:007: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Exit
2010.06.03 at 04:33:35:007: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: findWireMessageByB2BMessageId: querying for id = 1410017
2010.06.03 at 04:33:35:007: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: findWireMessageByB2BMessageId: Returning null
2010.06.03 at 04:33:35:007: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2010.06.03 at 04:33:35:008: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.06.03 at 04:33:35:008: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Enter:
2010.06.03 at 04:33:35:008: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Got RTP Context
2010.06.03 at 04:33:35:008: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Exit
2010.06.03 at 04:33:35:009: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateAppMessageState Enter
2010.06.03 at 04:33:35:009: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: getAppMessageById: Enter appMsg id = 7F000001128FCF1A4C600000EA6A8D00
2010.06.03 at 04:33:35:009: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: getAppMessageById: Got RTP Context
2010.06.03 at 04:33:35:012: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: getAppMessageById: Got [1] messages for AppMessage ID 7F000001128FCF1A4C600000EA6A8D00
2010.06.03 at 04:33:35:012: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: getAppMessageById: Exit
2010.06.03 at 04:33:35:013: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:setAppMsgErrorInfo Enter
2010.06.03 at 04:33:35:013: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:setAppMsgErrorInfo Setting AppMessage to ERROR
2010.06.03 at 04:33:35:013: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:setAppMsgErrorInfo Exitr
2010.06.03 at 04:33:35:013: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Enter:
2010.06.03 at 04:33:35:013: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Got RTP Context
2010.06.03 at 04:33:35:014: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Exit
2010.06.03 at 04:33:35:014: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateAppMessageState Exit
2010.06.03 at 04:33:35:014: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Enter
2010.06.03 at 04:33:35:015: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Enter:
2010.06.03 at 04:33:35:015: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Got RTP Context
2010.06.03 at 04:33:35:016: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: updateObject: Exit
2010.06.03 at 04:33:35:016: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:DbAccess:updateMsgError(3 params) Exit
2010.06.03 at 04:33:35:016: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2010.06.03 at 04:33:35:016: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:updateNativeEvtTblRow Enter
2010.06.03 at 04:33:35:017: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Enter
2010.06.03 at 04:33:35:017: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Got RTP Context
2010.06.03 at 04:33:35:019: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Got 1messages for field messageId with value 1410017
2010.06.03 at 04:33:35:019: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: queryById: Exit
2010.06.03 at 04:33:35:019: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: findWireMessageByB2BMessageId: querying for id = 1410017
2010.06.03 at 04:33:35:019: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.ToplinkHelper: findWireMessageByB2BMessageId: Returning null
2010.06.03 at 04:33:35:019: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) DbAccess:updateNativeEvtTblRowGot WireMessage with B2BMessage ID 1410017
2010.06.03 at 04:33:35:020: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2010.06.03 at 04:33:35:020: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
2010.06.03 at 04:33:35:020: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) Notification: notifyApp: Enter
2010.06.03 at 04:33:35:020: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@8f1195: B2B - (DEBUG) Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>7F000001128FCF1A4C600000EA6A8D00</correlationId>
<b2bMessageId>1410017</b2bMessageId>
<errorCode>B2B-51505</errorCode>
<errorText>
Error Brief :
Validator error - Extra data was encountered.
An X12 syntax error occurred.
An X12 syntax error occurred.
Validator error - Extra data was encountered.
Validator error - Extra data was encountered.
A data element with 'Mandatory' status is missing.
</errorText>
<errorDescription>
<![CDATA[
Error :
Extra Element was found in the data file as part of Segment REF. Segment REF is defined in the guideline at position 046.{br}{br}This error was detected at:{br}{tab}Segment Count: 3{br}{tab}Element Count: 2{br}{tab}Characters: 567 through 575
At least one of REF02, REF03 must be present. The syntax rule R0203 of Segment REF is violated. Segment REF is defined in the guideline at position 046.{br}{br}This error was detected at:{br}{tab}Segment Count: 3{br}{tab}Element Count: 2{br}{tab}Characters: 593 through 593
At least one of REF02, REF03 must be present. The syntax rule R0203 of Segment REF is violated. Segment REF is defined in the guideline at position 046.{br}{br}This error was detected at:{br}{tab}Segment Count: 3{br}{tab}Element Count: 3{br}{tab}Characters: 593 through 593
Extra Element was found in the data file as part of Segment ISR. Segment ISR is defined in the guideline at position 030.{br}{br}This error was detected at:{br}{tab}Segment Count: 6{br}{tab}Element Count: 1{br}{tab}Characters: 870 through 872
Extra Element was found in the data file as part of Segment ISR. Segment ISR is defined in the guideline at position 030.{br}{br}This error was detected at:{br}{tab}Segment Count: 6{br}{tab}Element Count: 2{br}{tab}Characters: 907 through 915
Element ISR01 (Shipment/Order Status Code) is missing. This Element's standard option is 'Mandatory'. Segment ISR is defined in the guideline at position 030.{br}{br}This Element was expected in:{br}{tab}Segment Count: 6{br}{tab}Element Count: 1{br}{tab}Character: 933
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
Even though I am providing REF01 and ISR01 values, I am getting this Error.
Below is my XML payload.
<?xml version="1.0" encoding="UTF-8" ?>
- <Transaction-870 xmlns:ns0="http://www.edifecs.com/xdata/200" Standard="X12" xmlns="http://www.edifecs.com/xdata/200">
- <ns0:Segment-ST>
<ns0:Element-143>870</ns0:Element-143>
<ns0:Element-329>000000043</ns0:Element-329>
</ns0:Segment-ST>
- <ns0:Segment-BSR>
<ns0:Element-850>3</ns0:Element-850>
<ns0:Element-847>PA</ns0:Element-847>
<ns0:Element-127>3110000031OTM_TestPR</ns0:Element-127>
<ns0:Element-373>20100603</ns0:Element-373>
</ns0:Segment-BSR>
- <ns0:Loop-REF>
- <ns0:Segment-REF>
<ns0:Element-128>VR</ns0:Element-128>
<ns0:Element-127>RHEEM002</ns0:Element-127>
</ns0:Segment-REF>
</ns0:Loop-REF>
- <ns0:Loop-HL>
- <ns0:Segment-HL>
<ns0:Element-628>1</ns0:Element-628>
<ns0:Element-735>O</ns0:Element-735>
</ns0:Segment-HL>
- <ns0:Segment-PRF>
<ns0:Element-324>OTM_Test</ns0:Element-324>
</ns0:Segment-PRF>
- <ns0:Loop-ISR>
- <ns0:Segment-ISR>
<ns0:Element-368>PR</ns0:Element-368>
<ns0:Element-373>20100531</ns0:Element-373>
</ns0:Segment-ISR>
</ns0:Loop-ISR>
</ns0:Loop-HL>
- <ns0:Loop-HL>
- <ns0:Segment-HL>
<ns0:Element-628>2</ns0:Element-628>
<ns0:Element-735>I</ns0:Element-735>
</ns0:Segment-HL>
- <ns0:Loop-PO1>
- <ns0:Segment-PO1>
<ns0:Element-350>1</ns0:Element-350>
<ns0:Element-330>2</ns0:Element-330>
<ns0:Element-355>EA</ns0:Element-355>
<ns0:Element-235>SK</ns0:Element-235>
<ns0:Element-234>6836003</ns0:Element-234>
<ns0:Element-235_1>VP</ns0:Element-235_1>
<ns0:Element-234_1>TAHM ITEM</ns0:Element-234_1>
</ns0:Segment-PO1>
- <ns0:Segment-PID>
<ns0:Element-349>F</ns0:Element-349>
<ns0:Element-352>TAHM ITEM</ns0:Element-352>
</ns0:Segment-PID>
</ns0:Loop-PO1>
</ns0:Loop-HL>
- <ns0:Segment-CTT>
<ns0:Element-354>2</ns0:Element-354>
</ns0:Segment-CTT>
- <ns0:Segment-SE>
<ns0:Element-96>11</ns0:Element-96>
<ns0:Element-329>000000043</ns0:Element-329>
</ns0:Segment-SE>
</Transaction-870>
Thanks in Advance
Ravdeep

Hi Ravdeep,
Have you validated the payload against the ecs using document editor? If no, please do so.
Also refer -
5084: XEngine error - Invalid data (outbound with validation disabled)
Please paste the complete B2B log here/mail it to my id (in my profile)
Regards,
Anuj

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?

How do I prevent errors importing foreign characters into subtitles for DVD studio pro?
I have figured out just about everything necessary for creating subtitle tracks in several foreign languages, but the only problem is that some individual characters in some languages (like the "open quotation mark" symbol in Lithuanian!) do not import properly into the subtitle track. I can type or paste the symbols in manually, but this means doing it hundreds of times in several different languages, and defeats the purpose of using the system I've created.
Does anyone know how to import some of these odd characters.
I import characters using a text file saved in Unicode-16, and I set the language of the track to the proper language (for instance, Lithuanian).
I can't find the answer anyway, and really am stumped!!
Thank you!!

i think i might have figured out a solution. it's a quirk in the program. i noticed that sometimes the quotation marks DO actually import, but only if they are in the middle of a sentence. they only FAIL to import at the beginning of a sentence. so, what i did was to paste a space before the beginning of every sentence with a weird low-down quotation mark, and it imported fine.
and it also seems to kill two birds with one stone, because sometimes it seems that DVD studio pro cuts off a few pixels at the beginning of a line -- so with a space inserted it just cuts off...nothing.
so far so good. thank you for trying to help, Tom. MUCH APPRECIATED. this stuff can be very frustrating. i'm already going bald fast enough....erg.

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

I am trying to install MasterCollection_CS6_LS16. When I click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation.

I am trying to install MasterCollection_CS6_LS16. When I double click the install file I get this error message: We've encountered the following issues. Installation on case-sensitive volumes is not supported. Please choose a different volume for installation. What does that mean? How should I proceed?

Hey iraravitz,
Could you please let me know what version of OS are working on.
You might receive this error when you attempt to install on a drive with the HFS+ Case Sensitive file system, which is not supported for installation of Adobe Creative Suite 6.
So, please try installing on a drive that has been formatted with a supported file system.
You might refer the KB doc link mentioned below for the same:
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Let me know if this helps.
Regards,
Anubha

"error Report" "iTunes has encountered a problem and needs to close" HELP!!

every time i try to load itunes i get this message
"error Report" "iTunes has encountered a problem and needs to close". i have tried uninstalling and reinstalling. i tried removing quicktime through my control pannel and then reinstalling. ive tried running scans and pretty much anything else i can think of. at this point i might just return the ipod. anyone have any ideas.

Have you tried uninstalling Quicktime? If not try that. If you are still having problems then do this.
1. Uninstall both iTunes and Quicktime.
2. Delete the folders iTunes and Quicktime where installed in.
3. Reboot.
4. Delete C:\Documents and Settings\<<Your User ID>>\Application Data\Apple Computer\
5. Delete C:\Documents and Settings\<<Your User ID>>\Local Settings\Application Data\Apple Computer
6. Delete if in your My Documents folder there is a folder called My Music with a folder in it called iTunes. Delete or rename the iTunes folder.
7. Reboot.
8. Turn off all anti virus and firewall software.
9. Re-install iTuens.
If you still get an error after that your Windows install is hosed. You will need to format and re-install it first.

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

I keep getting the Error "Adobe Muse has encountered an error and will now exit..."

I keep getting the Error "Adobe Muse has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. UIDs With Multiple Owners: ImageFrame owned by PagePageItem and BaseLink". I get this when I try and save and I am not sure what is causing it or, since i made several changes to the site, which actions it would have been. I am using the latest updated version of Muse. the 2014.3 I was able to publish site with changes but it did not save, so I have a web version different then what is saved. My published site is the most recent one but the saved version is one without latest changes. When I tried to merge it started updating the Assets and then showed that Error message and shutdown.

I believe you have already updated Muse version which includes fix for this issue , if not then please update Muse to latest version.
Thanks,
Sanjit

How can I get a SOAP Error message in ABAP ?

Dear all.
I'm trying to get SOAP Error message during XI Interface.
I've got an Error ( T-code : sxi_monitor ) and I need to get the Error message and write to screen.
I used
CATCH CX_AI_APPLICATION_FAULT.
CATCH CX_AI_SYSTEM_FAULT.
but couldn't get the error message.
The Error occured as below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTSD0030' (structure 'stmt1'): java.sql.SQLException: FATAL ERROR: Column 'ORDER' does not exist in table 'ZTSD0030'</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I exactly need 'BOLD' style message.
Any help is appreciated.
Thanks!

Hi,
This is an application fault,
error log clearly saying that''ORDER' does not exist in table 'ZTSD0030'.
these are specific to interfaces, in order to handle those
u need to configure apllication log at 'SLG1' t.code.
i mean, u have to use following function moules to handle application log in ABAP Proxy .
i.e
APPL_LOG_WRITE_HEADER
APPL_LOG_WRITE_MESSAGES
APPL_LOG_WRITE_DB.
warm regards
mahesh.

When runnning any form i get the error Internet Explorer has encountered ..

Hello allllllllll...
When runnning any form i get the error Internet Explorer has encountered a problem and needs to close.We are sorry for the inconvenience.
Any help pls.
Abdetu..

Thanks Sim for reply
I went to the pass :
C:\Developer10\j2ee\DevSuite\application-deployments\forms
then found a log file with each log in occured i got 4 today the following logged transaction:
08/01/01 10:48:36 Started
08/01/01 10:55:16 forms90web: jsp: init
08/01/01 10:55:16 forms90web: f90servlet: init
08/01/01 10:55:17 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 10:55:17 forms90web: 9.0.4.0.0 Started
08/01/01 12:51:43 forms90web: 9.0.4.0.0 Stopped
08/01/01 12:51:43 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
08/01/01 12:51:53 Started
08/01/01 12:52:04 forms90web: jsp: init
08/01/01 12:52:04 forms90web: f90servlet: init
08/01/01 12:52:04 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 12:52:04 forms90web: 9.0.4.0.0 Started
08/01/01 12:52:41 forms90web: 9.0.4.0.0 Stopped
08/01/01 12:52:41 Stopped (JVM termination)
08/01/01 12:56:42 Started
08/01/01 12:58:32 forms90web: jsp: init
08/01/01 12:58:32 forms90web: f90servlet: init
08/01/01 12:58:32 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 12:58:32 forms90web: 9.0.4.0.0 Started
========================================================
But unfortunitly i can't invistigate anything..?!!!
This error raised not only on my pc but to each co-worker with me ..
i have no reason 4 what's going on..
================================================
any suggestions will be appreciated..
Abdetu..
===========================

Error message- "LR has encountered problems reading this photo" after installing LR 5.6 on new computer and retrieving all contents from old HD from external HD.

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

SOAP error "Unicode supplemental characters encountered in parameter"..!!

Similar Messages

Maybe you are looking for