SOAP- PI- IDoc scenario - getting IDoc acknowledgment

Hi guys,
is there any way how to propagate acknowledgment of an received IDoc in ECC back to the SOAP caller?
If I'm not wrong, sending IDoc to ECC is an asynchronous step. Is there any way how to let the caller know that the IDoc was received successfully?
Thanks, Peter

Hi Peter,
If your scenario is async, then you can receive by standard the acknowledgment. You can as well configure the acknowledgment in PI as seperate message (e.g. for mapping) with report idx_alerequest.
If your scenario is synchr you need to setup a Business Process with a sync - async bridge: The BP receives the SOAP msg, sends an IDoc requesting an ackn (or receives it as separate msg) and finally send the response back to the SOAP sender.
Regards,
Udo

Similar Messages

Idoc to idoc scenario with idoc tunneling

IN idoc to idoc scenario with idoc tunneling the XML_CONVERSION parameter to value 2 is set whish means An IDoc is converted to IDoc-XML if requested by the service
I want to know where we specify this and how we specify?

1. /people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
2. /people/alessandro.guarneri/blog/2006/03/05/managing-bulky-flat-messages-with-sap-xi-tunneling-once-again--updated
ref these weblogs.
It is given under;
TCODE - SXMB_ADM
- Integration Engine configuration
- set the XML_CONVERSION parameter to value 2

File to Idoc Scenario and Idoc to File Scenario's

Hi Friends ,
This is Shalini Shah,
Please give me the details of how many busines sytems required in File to Idoc Scenario and Idoc to File sceanrio's.
In business system , what is the name of Integration server(this name is related to XI ot Third Party)
Please give me the full details of these two scenarios from Scratch.
Thanks in Advance.
Regards,
Shalini Shah.

Hi
These r few links which gives u complete scenarios...
for idoc to file:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
for file to idoc:
part1
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
part2
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
part 3
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
This link is also good:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Troubleshooting File-to-IDOC Scenario in XI.
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
kindly rewards points if helpful.

Trouble shooting File to Idoc scenario: wrong Idoc structure in target

Hi All,
             I am working in an file to idoc scenario. Now the scenario is running but the idoc I am sending from SAP XI is not matching with one received in SAP R/3 system. This is not a new scenario. The scenario was already existing. I have done structural changes in Idoc structure and re-imported it in SAP XI. When the iodoc reaches SAP R/3 system I check its structure and data content. 4 of its fields are missing all 4 were newly added fields. Data from some fields are getting merged into one field within Idoc. data from one field is moving onto other fields in target. I have refreshed the metadata using IDX2 transcation within SAP XI but still getting same result.

Hi All,
I am able to see the changed idoc structure in IR. I have also tried cache refresh. I am trying to explain my problem once again with example.
Source Idoc in XI
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f3                                       d33
       f4                                       d4
       f5                                       d5
Idoc structure received in SAP R/3 system. I am seeing through we02 transcation, inbound idoc
      fieldname                            data
       f1                                       d1
       f2                                       d2
       f4                                       d33d4
I have tried cache refresh, IDx2 metadata refresh, but no improvement of the situation.

Soap to proxy scenario Getting exception caught with cause error

Hi Experts,
MY scenario is soap to proxy i am getting below exception message in advanced engine configuration in ICO.
OAP: request message entering the adapter with user J2EE_GUEST
09/10/2014 11: 06: 03 346 XI Information Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
09/10/2014 11: 06: 03 346 XISOAP Information: Received an XI message for processing
09/10/2014 11: 06: 03 598 Error SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
OAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
09/10/2014 11: 06: 03 598 Information SOAP: response message to continuing 7477aafa-38da-11e4-beed-00000028af0a
09/10/2014 11: 06: 03 599 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 599 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
payload is contains some special charters in which is in protiguse language
example.
• AWPJ SERV DE TERCERIZ and
dot is the special char
same payload while testing using sproxy tcode dot "•" is converting in " # "symbol and with out error its successfully updating the database in ECC.
while testing using the same payload using soap ui removing the dot symbol from the field its successfully processing and updating the database.
is this interface is failing in PI level ? or ECC i am not getting dump in ecc.
is there any special character conversation in sap pi level.
where this message exactly failing is in PI level or in ECC level?
Help us find the solution.

Hi Ravinder,
When you mark the option Do not use SOAP envelope the adapter will not generate the SOAP envelope therefore you need to set an extra mapping in the Request to wrap the SOAP envelope. For example with XSL:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
 <xsl:template match="/">
 <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header/>
 <SOAP:Body>
 <xsl:copy-of select="/"/>
 </SOAP:Body>
 </SOAP:Envelope>
 </xsl:template>
</xsl:stylesheet>
Later in the response you will have the SOAP envelope tags. (You can do a first try without java mapping only to see in the monitoring the response with the junk character).
When you determine the junk character you can try to use and to modify the next java mapping SAP PI - Deciphering apostrophes in XML - Process Integration - SCN Wiki to deal with your problem.
Hope this helps.
Regards.

How can I include the Header Information....for a File to IDOC Scenario

Hi,
I made a File to IDOC Scenario with DEBMDM06 for MDM>XI>SAP R/3. The Header Information in the XML File which is at the XI end is Missing. For that reason In Tcode SXMB_MONI we are getting an Error that "HEADER Information Missing: Message should Start with EDI_DC40" i.e the Header Information.
My Question is that whether we can do some changes in the Message mapping Step in the Integration Repository. I HardCoded the Few mandatory Fields that were there but it Again gave me the Same Error as above.
Can you please Suggest some Solution for this. Since the data is Coming in from MDM part the Header information is not there but It actually Important as it has got all the Port Information.
Kindly Inform me some Solutions.
Thanks & Regards
Somnath

Hi Suraj,
Thanks for ur Reply, but Since we are Doing a File to IDOC Scenario the IDOC DEBMDM is on the Right Side in Message Mapping and as U know it is Mandatory to Map an IDOC on the Right Part. EDI_DC40 is coming as it is there in the IDOC but our XML File Does not have that. If we Don't Map then it Becomes RED, which is an Error.
Furthermore in the Receiver Agreement we have put the Necessary Details such as Sender Service and Receiver Service along with the IDOC Communication Channels.
Can U give as a Better Insight on this Note how to check the Header Part as it is mandatory to MAP.We also tried to HARDCODE it by putting those Values and Mapping them to a Constant but it is Giving the Same Error.
Thanks and Regards
Somnath

File to idoc scenario (split message)

hello everybody
i have a file (xml) -> XI -> Idoc scenario
sometimes idoc message is so much big and i have problem to process it.
so i would like split message in more idoc but i need decide a cut-point
example in file i have 200 row and i don't want create 200 idocs but example 4.
So i need cut file every 50 rows.
It's possible?
thanks
Alex

Hi Alessandro ,
We had the same problem in HR implementation where we used to get data for thousands of employees in a single file.
As Idoc was not able to hold this much of data,data used to be truncated.
Then we had taken a field (employee number) as a criteria to generate IDocs,and now we have an IDoc generated for each employee record.
This was helpful as for a single employee,there were a number of change records.
The logic used was:
Employeecode -> splitByValue(value changed) -> collapseContexts -> IDoc.
Does it suit your requirement as well?I mean,may be you can find such field for splitting IDocs.
Kindly let us know.
Thanks.
Regards,
Shweta

Idoc Scenario Partner type not LS

Hi experts ,
we have gone through https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a&overridelayout=true for idoc scenario where idoc partner type is not a logical system .Now we are working on case2 scenario in above document.we have some confusion in the configurations at R/3 side.Can somebody explain the step by step configuration at R/3 side.
Thanks.

Hi Mark,
For your requirement you, create partner profile for LS with following steps :
Create New Partner profile and give your respective TY (User Type), Agent & Language and then follow maintain following parameters under Outbound Parameters :
Message Type : INVOIC
Under Outbound Option u2013 Tab
Receiver Port : <Mention your receiving port here, to create Receiver port you have to go to WE21 transaction>
Pack Size : 1
Transfer IDoc Immediately (Select)
Basic Type : INVOIC02
Cancel Processing After Syntax Error (Select)
Under Message Control - Tab
Application : V3
Message Type : RD00
Process Code : SD09
Hope, your problem will get resolve.
Regards..
Imran

IDoc to IDoc Scenario - Correct Interface Mapping configuration

Hello All,
i have to configure an Interface Mapping for an IDoc to IDoc scenario.
IDoc Type for sending and receiving already imported and located under Imported Objectes\IDocs in respective Software Component Version.
Now, how is the correct configuration? Add the sending respectively receiving IDoc Type directly to Source Interface/Target Interface under Display Interface Mapping or create first a sending Message Interface and a receiving Message Interface and add the IDoc type under configuration Message Types. Then add the Message Interface to the Interface Mapping.
The selection for direct import of the IDoc structure under the Interface Mapping (Source Interface/Target Interface) is possible.
Many Thanks in advanced!
Jochen

hi,
for IDOCs (if you don't use a BPM)
you don't need any message interface
so if you have already created a message mapping
you can put the IDOCs directly to your interface mapping
then click on read interfaces
and select your message mapping program
if you want to learn more about IDOCs and XI
have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

SOAP to IDocs Scenario...IDocs getting locked at SAP

Dear Experts
We are sending measuring point details to SAP system from 3rd Party. Scenario is working fine for small amount of load. If more number of messages triggered (say 100) IDocs at SAP are getting stuck u201CMeasPoint 10000211 currently locked -> document processing not possibleu201D.
I tried configuring Sender SOAP adapter as EOIO and specified the Queue name as Test Queue. Still IDocs are getting stuck at SAP ECC. Now one more issues messages are getting stuck in queue SMQ2. We can control the flow by using BPM in PI. I donu2019t want to use BPM for this. Can we control this from SAP or using Trigger by background program in Partner profiles?
Please suggest. Thank You.
SAP Error Details:-MeasPoint 10000211 currently locked -> document processing not possible
Message no. IR007
Diagnosis
The object you want to access is locked, either
u2022     By yourself in another session, or
u2022     By another user
u2022     or by the system, which is still processing data for this object
System Response
The system cannot access the object.
Procedure
u2022     If you are locking the object yourself in another session, exit processing in the other session and continue processing in this session.
u2022     If the object is locked by another user, you can
o     contact the other user
o     wait until the other user has finished processing the object
u2022     If the object is locked because the system is still processing its data, wait a while, and then call up the object again.

1. Create a new process code "Z" and check the enque state of the objects before passing back to standard processing modules. Id also change to process immediate as part of this change
or
2. I think assuming RBDAPP01 is still used you may be able to make use of an exit there to do the same thing .. check and wait before processing.
or
3. In message mapping place a UDF that has some kind of wait timer in it (this is random and wont always work cause you wont know when the lock is dropped) but should work.
or
4. Dont use IDOC's create an abap proxy to do the work as a sync process. Processing will need to finish in the proxy and return to the PI stack before the next message is processed in the EOIO queue - this would be the prefered option as far as im concerned, it guarenteed to work and as long as your proxy sticks to the standard rouintes it should be upgrade friendly.
or
5. Use a proxy as above but dont do any processing, just use the proxy to build the IDOC and post it - then check the status of the locks until you are ready then rinse and repeat ..... but like scratching your right ear with your left hand .. but it will work.

Receive acknowledgement in file-to-idoc scenario

Hello!
I'm using guide "How to handle acknowledgement for IDOC", and for the first time I want to see an acknowledgement status in sxmb_moni.
I have passed all steps:
In CRM I have logical system P1DFILE, this is the system that sends an idoc to CRM.
Also, I have logical system C2DCLNT100 - this is CRM system.
First, I go to BD64, create new model view XI_CRM. Then, add message type:
Sender system - C2DCLNT100
Receiver system - P1DFILE
Message type - ALEAUD.
Then I create RFC destination P1D_001 to my PI server.
Then I create port SAPP1D using WE21
Then I go to WE20, choose my Logical System - P1DFILE. I already have the inbound message types (CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_SAVE_M). I add new outbound message - ALEAUD with receiver port SAPP1D.
Then I go to RBDSTATE, create variant SAP_AUDIT_SEND and enter:
Confirmation to system: P1DFILE
Message type: CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_SAVE_M
Then, in SM36 I shedule SAP_AUDIT_SEND as a hourly job (does this mean, that I will receive confirmations only every hour?)
So, what should I do to see ack in sxmb_moni?

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

System Level Acknowledgement in File to IDOC Scenario

Hi All,
I have the File-> IDOC Scenario. Once the IDOC is successfully sent to R/3, PI should send a acknowlement file back to the sender system.
Could someone suggest how to design this scenario?
Should I use IDOC Acknowledgement. As it is a existing scenario, I dont want much change in r/3 side.

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

SOAP-IDOC scenario- HTTP 500 error

Hi All,
We are working on SOAP- IDOC scenario.
We are getting a request from Sender which should come via Reverse Proxy server to PI.
We generated WebService on PI and the URL(X) is shared with Proxy team, wherein they mapped that URL (X)with other URL(Y). This URL (Y)is shared to sender and he is trying to send some requests now.But below is the error message.
[09/02/13 15:26:12] ID=app01 (trace) Delivered HTTP Direct outbound message, containing details...
        Destination URL=https://XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
        User=ZZZZZZZ
        Status Code=500
        [req]Content-Length=7148
        [req]X-HTTPS-ClientAuthCertificate=/AAAAAAAAAAAAAAAA
        [req]X-HTTPS-ClientAuthCertificateForm=PKCS12
        [req]Authorization=Basic RjRGSU5GWEQxMDA6c3luZ2VudGEx
        [req]X-HTTPS-CACertificatePath=/BBBBBBBBBBBB
        [req]X-HTTPS-PrivateKey=/CCCCCCCCCCCCCCCCC
        [req]JMSReplyTo=sga.ws.test.response
        [req]messageuniqueid=6d65d89f-ffff-ffc0-00ee-3aa7032c3299
        [req]adpnextmlemarkersequence=3
        [req]X-HTTPS-PrivateKeyPassword=ZZZZZ[maid
        [req]Content-Type=text/plain
        [resp]content-type=text/xml; charset=utf-8
        [resp]set-cookie=saplb_*=(SERVERNAME)226695750; version=1; path=/
        [resp]set-cookie=saplb_*=(SERVERNAME)226695750; version=1; path=/
Any Clue

Hi,
Check this
HTTP 500
o Internal error in J2EE
o Check SAP Note 807000 - Http requests are not fully read
after timeout
Regards,
Sreenivas

SOAP to IDOC scenario: java.lang.NullPointerException

Our trading partners currently post their xml files directly to our Integration Engine, where they are converted to idocs and posted to ECC. I am now trying to change this scenario to a SOAP to IDoc scenario so that we can process the files through the Adapter Engine using HTTPS. But I am running into an error when trying to post an xml file and I'm wondering what I am missing.
My SOAP communication channel is configured as follows:
Transport protocol: HTTP
Message protocol: SOAP 1.1
Adapter engine: Integration Server
HTTP Security Level: HTTP
Do Not Use Soap Envelope: *Checked*
Default interface and namespace have been specified
QoS: Exactly Once
If I post an xml file to this channel using the RWB test tool, I receive message java.lang.NullPointerException. However, I can find the message via the Message Monitoring in the RWB, with versions for both the AE and IE, each with status Successful. The idoc is created and successfully posted to ECC.
If I post this same file to the same URL using a third-party tool, I get the same error message along with more details (listed below). Futhermore, a message does *not* show up in the RWB and thus does not get converted to an idoc and posted to ECC.
Any ideas??? Thank you.
<?xml version="1.0" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP:Body>
- <SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
- <detail>
- <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
- <text>
- <![CDATA[
java.lang.NullPointerException
 at com.sap.aii.messaging.net.MIMEInputSource.decodeContentType(MIMEInputSource.java:425)
 at com.sap.aii.messaging.net.MIMEInputSource.readBody(MIMEInputSource.java:323)
 at com.sap.aii.messaging.net.MIMEServletInputSource.parse(MIMEServletInputSource.java:58)
 at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:381)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
]]>
</text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>

Here's the message log found in End-to-End monitoring from RWB test post (different from third-party tool message):
java.lang.NullPointerException
 at com.sap.plaf.frog.FrogScrollPaneUI$1.propertyChange(FrogScrollPaneUI.java:113)
 at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
 at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
 at java.awt.Component.firePropertyChange(Unknown Source)
 at javax.swing.JScrollPane.setHorizontalScrollBar(Unknown Source)
 at javax.swing.plaf.basic.BasicComboPopup.createScroller(Unknown Source)
 at javax.swing.plaf.basic.BasicComboPopup.<init>(Unknown Source)
 at com.sap.plaf.frog.FrogComboPopup.<init>(FrogComboPopup.java:21)
 at com.sap.plaf.frog.FrogComboBoxUI.createPopup(FrogComboBoxUI.java:410)
 at com.sap.plaf.frog.FrogComboBoxUI.installUI(FrogComboBoxUI.java:178)
 at javax.swing.JComponent.setUI(Unknown Source)
 at javax.swing.JComboBox.setUI(Unknown Source)
 at javax.swing.JComboBox.updateUI(Unknown Source)
 at javax.swing.JComboBox.init(Unknown Source)
 at javax.swing.JComboBox.<init>(Unknown Source)
 at com.sap.jnet.clib.JNcToolBar$ComboBox.<init>(JNcToolBar.java:64)
 at com.sap.jnet.clib.JNcToolBar.addComboBox(JNcToolBar.java:192)
 at com.sap.jnet.clib.JNcAppWindow.newUI(JNcAppWindow.java:607)
 at com.sap.jnet.clib.JNcAppWindow.newData(JNcAppWindow.java:1097)
 at com.sap.jnet.JNetData.createGraphFromDOM(JNetData.java:512)
 at com.sap.jnet.JNetData.load(JNetData.java:709)
 at com.sap.jnet.JNetApplet.initJNetApplet(JNetApplet.java:524)
 at com.sap.jnet.JNetApplet.access$000(JNetApplet.java:40)
 at com.sap.jnet.JNetApplet$1.run(JNetApplet.java:265)
 at java.awt.event.InvocationEvent.dispatch(Unknown Source)
 at java.awt.EventQueue.dispatchEvent(Unknown Source)
 at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
 at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
 at java.awt.EventDispatchThread.run(Unknown Source)

Reg File to IDOC scenario with Acknowledgment

Hi Experts!
In a File to IDOC scenario , how to get the acknowledgment back to PI after posting the IDOC to SAP system and send the acknowledgment to the sender system.
What setting needs to be done in Sap and PI? Is it better if we have a BPM or is it good to have another interface to pass the acknowledgment IDOC back to the file sender.
Regards,
Srini

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

SOAP- PI- IDoc scenario - getting IDoc acknowledgment

Similar Messages

Maybe you are looking for