SOAP to IDocs Scenario...IDocs getting locked at SAP

Dear Experts
We are sending measuring point details to SAP system from 3rd Party. Scenario is working fine for small amount of load. If more number of messages triggered (say 100) IDocs at SAP are getting stuck u201CMeasPoint 10000211 currently locked -> document processing not possibleu201D.
I tried configuring Sender SOAP adapter as EOIO and specified the Queue name as Test Queue. Still IDocs are getting stuck at SAP ECC. Now one more issues messages are getting stuck in queue SMQ2. We can control the flow by using BPM in PI. I donu2019t want to use BPM for this. Can we control this from SAP or using Trigger by background program in Partner profiles?
Please suggest. Thank You.
SAP Error Details:-MeasPoint 10000211 currently locked -> document processing not possible
Message no. IR007
Diagnosis
The object you want to access is locked, either
u2022     By yourself in another session, or
u2022     By another user
u2022     or by the system, which is still processing data for this object
System Response
The system cannot access the object.
Procedure
u2022     If you are locking the object yourself in another session, exit processing in the other session and continue processing in this session.
u2022     If the object is locked by another user, you can
o     contact the other user
o     wait until the other user has finished processing the object
u2022     If the object is locked because the system is still processing its data, wait a while, and then call up the object again.

1. Create a new process code "Z" and check the enque state of the objects before passing back to standard processing modules. Id also change to process immediate as part of this change
or
2. I think assuming RBDAPP01 is still used you may be able to make use of an exit there to do the same thing .. check and wait before processing.
or
3. In message mapping place a UDF that has some kind of wait timer in it (this is random and wont always work cause you wont know when the lock is dropped) but should work.
or
4. Dont use IDOC's create an abap proxy to do the work as a sync process. Processing will need to finish in the proxy and return to the PI stack before the next message is processed in the EOIO queue - this would be the prefered option as far as im concerned, it guarenteed to work and as long as your proxy sticks to the standard rouintes it should be upgrade friendly.
or
5. Use a proxy as above but dont do any processing, just use the proxy to build the IDOC and post it - then check the status of the locks until you are ready then rinse and repeat ..... but like scratching your right ear with your left hand .. but it will work.

Similar Messages

ALE-IDOC ISSUE(material getting locked for enhancement)

Dear all,
I have extended the idoc and enhanced inbound material master function module to suite the requirement .
The challenge is that the material is getting locked when the material sent from bd10 and prodction version view for which function module extended is not getting created.The error log says that "material is locked".But when the idoc is processed again from we19 the material is not getting locked and PV(production version is successfully created).
Can anybody guide me how this locking issue can be resolved?(have done unlock -lock before and after BDC for Production version).
Thanks.

Hi,
If some one using the same material in another session, definitely the idoc will fail as the material is locked... In order to overcome this first lock the material u want to send, if doing this u get foreign lock then u will know that already someone locked it , so once gain process the same record until the foreign lock is gone, once it is gone process ur record and then unlock the material.
Regards,
Nagaraj

File to IDoc Scenario: Idoc Status 50

Hello,
I have a problem in doing a File to IDoc Scenario with a simple XML file mapped to IDoc "CREMAS.CREMAS03". In the beginning, I got a status 56:"IDoc with errors added". Then I added a logical system (LS name of my sender)manually in "Display IMG";however, it didn't work. So I simply changed the logical system name of my sender to XI_00_800 which already exists in R/3. I tried the scenario again, then I got the status 50:"IDoc added". Looked like the IDoc still hadn't been correctly inserted as a record. May I ask what other steps or configurations do I need to do to get this scenario to work? Thank you.

Steve,
<i>Moreover, I didn't create any partner profile. The "XI_00_800" partner profile is in the system all along. Should I create a whole new partner profile and point that to my sender business system?</i>
You need not create it once again as it already exists. Normally , ALE configurations on an R3 system are the responsibiltis of the Functional Team. For instance , on our projects we are never given access to the End r3 systems and the Partner profile are created by the F'nal team itself.
Like I mentioned, ask your F'nal team why you are getting this issue. From XI side , there is nothing more you need to do.
Regards,
Bhavesh

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

IDOC Receiver Adapter, getting Lock Table Overflow to CRM System

Hello SDN!!!
This scenario is for PI to process a file and send to CRM via IDOC. The IDOCu2019s are only being created and not processed until later.
Problem: I am getting a Lock Table Overflow error in method IDOC_INBOUND_ASYNCHRONOUS via sm58 in PI which points to the CRM box.
I have been searching many forums and every solution seems to indicate increasing the lock table, the problem with that solution is we are currently trying to create (not process yet) 80000 IDOCu2019s. This would allocate too much for the lock table.
So my question is this, Shouldnu2019t the lock be released when the IDOC gets created or none the less when a packet of IDOCu2019s via content management (breaking up the file in 1000 increments) finish. The lock table in CRM keeps increasing until all rows from the file, sent via IDOC adapter in 80 messages with 1000 IDOCu2019s per messagein the table are complete (80 separate messages in sxmb_moni).
Background:
IDOC was imported, changed to include unbounded and reimported.
Content Management breaks the file into 80 different segments, thus creating 80 distinct mappings with distinct MessageIdu2019s.
80 IDOC packets are sent to CRM, via IDOC adapter and sm58.
TCODE sm12 in CRM shows the table to keep growing and locks not released until full message is complete.
Any help would be appreciated
Cheers
Devlin

The only way to process the IDOCs in this case is by increasing the "enque/table_size" parameter in order to create the required IDOCs. You can increase the value for this parameter up to 102400 (beyond that can cause performance issues). Since you need to handle 80000, this shouldn't be an issue.
Please refer to the notes below for more information about the lock queue overflow and management.
[Note 552289 - FAQ: R/3 Lock management|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=552289]
[Note 13907 - System error in the block handler, overflow lock table|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=13907]

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

File to IDoc scenario - IDoc received with Errors

Hi,
I tried to send send IDoc from a file to SAP R\3. The communication channels are working fine, and I get the IDocs in R\3 but with status 56. When I examine the received IDoc structure in transaction "WE19", I see that the receiver port(SAP + SID of sap server) is blank with no values. I tested the IDoc adding the receiver port, and the IDoc got successfully posted...
I wonder why the receiver port that I specified in payload file content, does not reflect during runtime. I'm using the downloaded MATMAS IDoc structure with sender and receiver details as the input from file....
Please help me out!
Thanks!!
-Ajitha

Rodrigo/Sarvesh/Ravi/Haseeb,
Thanks for the inputs!! I have checked in IDX1 and the port name is the same. Also "Apply control records values from payload" checkbox is selected. I guess there was some problem with cache. It started working fine, when I started a new session
Thanks for your time and inputs!!!

CRM to PI outbound IDOC scenario : IDOC ALE config

Hi folks,
I have a scenario: CRM-> PI
CRM system posts an IDOC to PI,
I have done all the necessary ALE configs:
1. comm. id on PI
2. RFC Destination on CRM to PI
3. Port on CRM. we21
4.Logical SYsm on CRM
5. Partn Prof on CRM
now, when i try to push out an idoc out of CRM , it fails in CRMs TRFC queu(SM58)
with this error:
Transaction IDX1: Port SAPDX1, client 500, RFC destination contain error
I have no clue why it failed with this error.
1. No idea from where it picked up this port as well.
2. Port i created to PI was an autogenerated Port and not SAPDX1, don't knw how it picks this up.
Would appreciate any help with respect to this.
Thanks,
Hank

Also, for your reference just double check if the following steps are completed properly for outbound processing:
1.Define Logical Systems and Assign Client to Logical System u2013 Transaction SALE
2.Maintain RFC Destinations u2013 Transaction SM59
3.Define Ports u2013 Transaction WE21
4. Maintain Distribution Model u2013 Transaction BD64
5.Generate/Create Partner Profile u2013 Transactions BD82/WE20
6.Distribute Model View u2013 Transaction BD64
    -Select the Model View
     -Go to menu path Edit -> Model View -> Distribute
     -Result log will be displayed on the next screen
Hopefully it should work now.
Puneet

Sender Namespace and Sender Interface in the IDOC to IDOC scenario

My question maybe very basic...
It is SAP IDOC to SAP IDOC scenario.
Lets assume that I have done config in XI for:
             Sender = A,
             Interface = B,
             Namespace = C.
My question is:
Is there a place in the source system or somewhere to point that
when an IDOC e.g. DEBMAS is triggered in the source system,
then the Interface should be B and Namespace should be C in the xml file ?
Cheers
Agnie

Hi Agnieszka,
     Check these threads/blogs from you may get some help:
/people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
Idoc-to-idoc scenario
IDoc to IDoc scenario necessary configuration steps
For A-Z help on IDOC, you can refer Michal's book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi IDoc Business Scenarios with SAP XI</a>
Regards,
Subhasha Ranjan

JDBC to IDOC Scenario

Hi Experts,
I have tried JDBC to IDOC Scenario but it is giving No Segments Found Exception. I don't know where I am doing the mistake.
can any body please send me a pdf document for JDBC TO IDOC Scenario with step by step procedure from scratch (including creation of LS,LI etc)
Thanks in Advance,
Murthy

Hi Murthy
The steps are pretty much the same as any other scenario with some exceptions
1: You import the IDOC structure from the R/3 System. This acts as the DT, MT and MI.
You also need to do some configurations on the ABAP Stacks of sender and XI system.
Sender:
WE20 Partner Profiles
SM59 RFC Destination
XI:
SM59 RFC Destination
IDX1 Ports
IDX2 This is the metadata repository so you wont necessarily need this.
Also because you IDOCs can be sent directly to the ABAP stack/Integration Server you do not need a sender comm channel or sender agreement.
The rest is pretty much as any other scenario.
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Cheers..
Vasu
<u>** Reward Points if found useful **</u>

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

IDoc-IDoc scenario - EOIO

Hello,
we've implemented IDoc-IDoc scenario. Sender is regular SAP system, receiver is Non-SAP system supporting IDoc receiving via RFC. We have following problem:
1. Receiver system is stopped.
2. Sender system sends IDoc but the IDoc cann't be delivered into Receiver (it's still stopped). The message is placed into some queue.
3. Receiver system is started again.
4. Sender system sends IDoc and the IDoc is delivered into Receiver (now it's already running).
5. After a few minutes adapter try to re-send the first IDoc. Now the adapter is succesfull and the first IDoc is also delivered into Receiver.
Problem is that we need keep right order of the messages.
Is it possible to resolve it?
Thanks in advance for every advice!
Regards,
Zbynek

I've tried that but it doesn't work.
Also I've tried to follow this blog /people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi but it doesn't work either.
I think all IDocs are send from Integration Engine but if they are not delivered they are putted into some special queue of IDoc adapter. Is it possible?

What is the need of xi in idoc to idoc related scenarios

Hi all,
Can any one explain me what is the need of xi in idoc to idoc related scenarios.\
we can Send Idoc with out Xi right?
Thanks,
Srinivas

IDOC to IDOC Scenario
pass through idoc to idoc scenario
IDoc to IDoc Scenario with High Volumes
SM58 Error For IDOC to IDOC Scenario

Error in SOAP to file scenario

Hey guys
i m doing a SOAP to File scenario and getting the following error.
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
any idea where should i look ?
thanx
ahmad

Hey
i m still getting a red flag in MONI,the error is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection.</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
i checked my mapping by copyin payload from MONI,its working fine.
thanx
ahmad

JCO problem in SOAP to file scenario

Hey guys
i m doin a SOAP to file scenario and getting a JCO error in moni,the status of my queue in SMQ2 is SYSFAIL,when i check the TCP/IP connection in SM59 i find error in two places
AI_DIRECTORY_JCOSERVER and AI_RUNTIME_JCOSERVER .when i test connection for both of them i get the followin error "Error opening and RFC connection".
is this error dues to some server problem of something wrong in my scenario.?
the SOAP adapter in RWB is green.
i tried to unlock and delete the queue in SMQ2 but when i execute my scenario again,it gets SYSFAIL error.
thanx
ahmad

Hi,
If you restart the J2ee engine, it will work.
But The error may because of many reasons
-Might be because of lots of messages are to be processed simultaneously.
-Increasing the number of processes in VisualAdmin (VisualAdmin>JCO RFC Provider>AI_RUNTIME_<SID>) and see if that helps.
-This SAP Note may help u -709140.
Hope this helps,
Regards,
Moorthy

SOAP to IDocs Scenario...IDocs getting locked at SAP

Similar Messages

Maybe you are looking for