SOAP Sender to RFC Scenario WSDL File

Hi,
I am working on SOAP -> PI -> RFC Scenario. I generated WSDL from sender agreement and gave to the client that can consumed by the third party system. But client is not ready to consume the WSDL. He provided WSDL and asking me to use that. Could you please suggest whether WSDL given by the client can be used in SOAP -> PI -> RFC Scenario. If it is possible, could you please provide steps how it can be done?
Thank you.
Regards,
Cdr.

Thank you Hareesh & Divya,
When we generate WSDL from PI, it gives soap action and soap address location based on the interface we use for SOAP -> PI -> RFC.
When we import WSDL given by the client as external definition, we get messages(Structures). But where do we pass the soap action or address location. I do not see any option in the soap sender communication channel. I am not visualize the link.
Can somebody share their knowledge if they have done in this way.
Thank you.
Regards,
Cdr.

Similar Messages

Help Need on SOAP (Sender) to RFC Scenario(Synchronous Communication)

Hi All
I have a requirement of SOAP(Sender) to RFC scenario(Syncronous Communication). The scenaio goes like this........
I have a web service through which I have to create a SAP Notification in SAP system and the Notification ID created and other details have to be returned back to the webservice from the BAPI. I have identified the relevant BAPI for the scenario.
I have a wsdl file which I have uploaded it. What are the next steps to be done?
Please let me know what all(e.g., Data types, Message Types, Message Interface) I have to create in Integration Repository and what all configurations I have to make in Integraion Directory.
FYI, I have a gone through a list of Blogs, but didn't get enough info.
Please help me out in providing your valuable answers.
Thanks,
Vijay
P.S. Rewards points are sure .....

Hi Vijay,
 If at all you have uploded wsdl file for the webservice you no need to create data types for the same even for the same as RFC also.
 Create message mapping and drag the wsdl file which you have imported as External Definiations and there you will be having request and response parameters..Do the mapping accordingly(according to your requirement).
Mapping like:
 Wsdl(Request)---->RFC (Input parametrs)
 RFC (out parameters)------>wsdl(Response)
Create message interface with Synchronous for outbound
 No need of DT,MT if at all if you import the wsdl file.
 Hope i am clear.
Please let me know if you have any queries..!
Thanks and Regards,
Chandu.
null
null

Soap -- XI -- IDOC/RFC scenario

Hello,
I have a jsp page that working in tomcat server.
I want to send values from jsp page to xi to r/3. I think it will have
soap-- xi -- IDOC/RFC scenario
Pls send me pdf /doc to implemet it
Regards

Hi,
Please Refer the Following Links
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Regards
Khanna

Soap Sender and RFC Adapter receiver getting APPLICATION_ERROR

Hi, all,
I have a webservice soap sender and RFC Adapter receiver scenario, it works fine with RFC "RFC_SYSTEM_INFO", When i tried the RFC "RFC_READ_TABLE", getting the following error message, <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code> in
SXI_MONITOR, in webservice client, i am getting error message like this:
<faultcode>SOAP:Server</faultcode>
 <faultstring>Server Error</faultstring>
 <detail>
 <rfc:ZZTEST_RFC_READ_TABLE.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
 <Name>TABLE_NOT_AVAILABLE</Name>
 <Text>QUERY_TABLE not active in Dictionary</Text>
 </rfc:ZZTEST_RFC_READ_TABLE.Exception>
Thanks a lot!

Hi
Its not compulsory but its good to wrap it as Z object.
Well if you are facing problem with SOAP data. Then try to do one thing. Check with the data you received from SOAP message. If this works
Then try to check in mapping is it passing the data correctly or not. With this check with the user authorization PIAPPLUSER. if its having less authorizations to execute this BAPI in ECC
Thanks
Gaurav

SAP Sender System (RFC scenario)

I don't understand who will initialize process of sending a message in case of RFC sender system.
I need to configure RFC destination in SAP System, configure XI RFC Sender Channel.
Will XI invoke RFC function on sender system? or Will sender system invoke RFC function on XI?
How to set up scheduling?

hi Denis,
>>>>Will XI invoke RFC function on sender system? or Will sender system invoke RFC function on XI?
if you want to send from the SAP then you have to
invoke the RFC youself
call function
desination
in background
commit work.
then all the values will go to the XI
that you passed in your RFC call
Regards,
michal

How to create a standard SOAP request message from a given WSDL file?

Hello,
If I have a WSDL file (either from a .net web service or from the famous Amazon web services), what is the best way to generate a SOAP compliant request message?
I am having trouble understanding the role of WSDL file in a given web service.
Question 1:
If I have a web service that is implemented using jaxm, how do I create/publish a WSDL file that describes the web service?
Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)
Question 2:
If I have a web service that is implemented using JAX-RPC, based on the WSDL file, can I simply generate a valid SOAP message (by some JAVA api) and get the response message directly?
thanks...

I have the same question ("Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)")
Have you already found an answer to this?

How to get contents of Soap Over JMS web service's wsdl file

Hi,
Is there a way to get the soap over jms webservice's wsdl file in browser? if yes please provide me the details how to get it.
OR how can i get the contensts of WSDL file for soap over jms wsdl file.
thanks in advance.

I have the same question ("Assuming I can generate a wsdl file, can I recreate the SOAP request message from the WSDL file automatically (that matches the original request, which is hand build by me?)")
Have you already found an answer to this?

XI to RFC Scenario

Hi SapAll.
i had created a Remote Function Module in SAP-R/3 with 2 structures under tables(tab)and this rfc is going to collect data from xi for doing some bdc and then when the bdc fails,rfc will return values to xi.
in this real time scenario what xi will do,i know that xi will collect the data from rfc.
as i have got the Netweaver-PI Software i would like to create a sample interface in PI for doing the above mentioned scenario
so what my question is how and in what way we can do this in XI without BPM,after xi collect the export parametes from rfc with failed reasons what xi do,will it update the sender.
will be waiting for a good answer.
regards.
Varma

1. if ur sender adapter is sync like SOAP
you sync RFC scenario...whatever the resposne that u get from RFC can be mapped back to sender using the response mapping..if the sender supports that fore.g if u are using SOAP as sender..
2. if ur sender adapter is not sync like file / JDBC / JMS
just do the RFC lookup in mapping ..map the response to the target structure and use the receiver which is same as the sender and generate file to the sender

HTTP error while sending SOAP request using wsdl file

We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitra

there is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI

(SOAP sender) --- XI ---- R/3 (RFC receiver) this sync scenario

Hi Experts,
Webservice(SOAP sender) < - > XI <--> R/3 (RFC receiver) this sync scenario tested with Infopath successfully.
I have given partner number,student object id are the two input fields(request) and i am getting student number as response. This scenario is working when i use MS infopath.
I have generated WSDL file embedded with below URL
http://xxxx.yyytec.passh.ed:7271/XISOAPAdapter/MessageServlet?channel=:Webservice_Sender_BS:GET_NUMBERS_Sender_CC&version=3.0;amp;Sender.Service=Webservice_Sender_BS;amp;Interface=urn%Apache
Sender business system: Webservice_Sender_BS
Sender CC: GET_NUMBERS_Sender_CC
Msg Interface: STU_GET_NUMBERS_Synch_MI
now we want to test from third party website, what are the things to be provided to the website developer to test the scenario.
the way i generated URL, is it correct?
if i provide above URL and generated WSDL in XI , is it enough for web developer to enter the input fields to RFC(r/3) via XI as webservice request and getting back response from RFC(r/3) to webservice via XI.
can you please advice if any body worked on this kind of scenario.
Thanks
Dhanush.

For the developer you have to provide WSDL file so that they know the input/output fields and write the code.
URL is correct.
Other informatino they required is Username and password of you PI system.
Gaurav Jain
Points if answer is helpful

SOAP to RFC synchronous scenario with File

Hi,
My scenario is
Java application is sending SOAP message to PI and PI should route that message (after converting SOAP message to XI message) to RFC.
2) After receiving the response from RFC PI should send the response to java application. Now here comes the little tweak, we need to map RFC response to File as well apart from sending SOAP response message (which is generated after mapping RFC response message to Java application response structure) back to Java application.
Is it possible without BPM?

Without BPM you can try below approach, but i would recommend you to use BPM.
Develop SOAP---->PI(rfc look up) -
> SOAP/JAVA application
map RFC loop up response to SOAP receiver and JAVA application/.
Regards,
Raj

HOW TO TEST SOAP SENDER TO FILE SCENARIO

Hi gurus,
I have designed and configured SOAP to file scenario.
I have used http://xyz namespace in design time.
I have created two business systems for this sceanrio.
I have downloaded and installed soap client on my system.
When I open this soap client it is asking
1)URL
2)load request from
3)In the editor request tab what should i give.
4)wht is the response tab here
I want to send data to XI from SOAP and then to file.
Please help how to give data and how to get the data format to give in the requst editor?
Points will B rewarded
Regards
Sreeni

Hi,
You can use a SOAP client like Altova XML spy for posting a message to XI.
The best way to do this is to use the generated wsdl for creating a soap request.
once the wsdl file is picked up by the soap client, it automatically generates the url.
now the response which comes back to the soap client is usually a http status code of successful post. (since u r performing an async scenario)
also ensure u use the j2ee port while genrating the wsdl using the "Create Webservice" option in Int Directory.
Also chk the link for the weblog on sender soap scenario.
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Hope this helps.
Award points if found helpful
Cheers!!
Sidharth

BPM- scenario RFC - XI - receive file - - SOAP - return answer to RFC

Hello everybody,
I have the scenario
RFC call a BPM
In the BPM, I have to receive information from a file ( generated by another system 4 times in a day)
Mix the data of the file with the data of RFC
Send them a SOAP
send the reply to the RFC
My problem is : how to receive the file on demand because in file adapter ( sender ), the definition is only by interval of time?
Is there anybody who can help me?
Thanks in advance and best regards.
Eric.

Hi Eric,
in sender file adapter, we just have polling interval - so in your receive step in BPM you have to wait for the source file.....
i do not think any other workaround will be feasible for your this case
Regards,
Rajeev Gupta

Problem with WSDL file generated by PI for sender SOAP

I have a scenario SOAP to idoc that I am trying to test in PI7.1. I have created my objects in the ESR and completed the configuration in IB. When I test the configuration in IB, the data passes through PI to ECC correctly.
Now I want to export the WSDL file from the Sender Service Interface being used for this scenario and test it using SOAPUI. However, when I look at the WSDL file proposed by PI, there is no SOAP URL proposed in the WSDL. My understanding from looking at other threads in the the forum is that the URL should be proposed in the WSDL file, and I can then export this WSDL file to my PC, and upload it into SOAPUI for testing.
Why is the URL not being proposed in my WSDL file?
Thanks in advance for any help.
Terri

Thanks Baskar that solved part of the problem.
When I use this newly generated WSDL file for testing in SOAPUI, I now get an error 401, which I believe has something to do with needing a user id and password. However, my scenario is not setup to require a userid or password. Any other help would be appreciated.
Below is the actual results from SOAPUI:
HTTP/1.1 401 Unauthorized
server: SAP NetWeaver Application Server 7.11 / AS Java 7.11
www-authenticate: Basic realm="XISOAPApps"
connection: close
pragma: no-cache
content-type: text/html;charset=ISO-8859-1
content-encoding: gzip
date: Thu, 03 Mar 2011 22:49:56 GMT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 401 &nbsp Unauthorized</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP NetWeaver Application Server 7.11 / AS Java 7.11 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Error: Unauthorized Troubleshooting Guide <a href="https://sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home">https://sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home</a>
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE>No details available</PRE></td></tr></table>
</body>
</html>

SOAP to RFC synchronous scenario with File without BPM

Hi Folks,
I have a requirement that has to be done with out BPM!!!
Requirement:
Soap will trigger the request to SAP(RFC) and SAP sends the response to a file and then after SOAP has to recieve the ACK from PI.
1) Can we do this by without using BPM
2)Can we use without BPM module entries for SOAP Sender
Please suggest and help me out in this
Thanks in advance,
Regards
vivek

Hi Vivek,
Why not have the SOAP interface defined as synchronous?
You can avoid using BPM that way.
Best Regards,
Ravi

SOAP Sender to RFC Scenario WSDL File

Similar Messages

Maybe you are looking for