"socketfilterfw" process using 2.25 GB RAM- Why?

Why has this process ballooned to such an extreme memory hog? Can I just kill it?

I found this which you can try:
Open the Terminal application in your Utilities folder and enter or paste the following at the prompt:
sudo defaults write /Library/Preferences/com.apple.alf globalstate -int 0
sudo defaults write /Library/Preferences/com.apple.alf firewallunload -int 1
sudo /usr/libexec/ApplicationFirewall/socketfilterfw -k (or kill the PID)
Press RETURN after each line. You will be asked to authenticate the first time. Enter your admin password which is not echoed.
Or since this is related to the firewall try turning off the firewall if you have it activated.

Similar Messages

Early 2013 13" MacBook Pro runs slow and uses a lot of RAM, why and what can be done?

Problem description:
My computer is using a lot of RAM. Wondering if there’s a hardware issue, or a software issue, or something else. I currently have no programs open in the Doc, besides EntreCheck. and the RAM is showing about 75% used. I’m looking for suggestions on what I can do to speed it up and make it more functional, and efficient for doing design work. I recently upgraded from the original 4GB RAM (2x2GB), and from the original HD to a 512 GB SSD drive, and upgraded to Yosemite. Perhaps that was too much for this machine? Please help with anything that I can do to make it better! Thanks in advance!
I have a recent back-up, I'm open to saving user files and starting from scratch with the current hardware, etc... but would need some direction on how to do this. I did upgrade myself using Apple provided instructions.
Here are the EntreCheck results:
EtreCheck version: 2.0.11 (98)
Report generated December 2, 2014 at 12:45:57 PM EST
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Verified)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 2 days 0:17:23
Disk Information: ℹ️
    Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        SuperCool (disk1) / [Startup]: 510.88 GB (320.22 GB free)
            Core Storage: disk0s2 511.25 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Microsoft Microsoft® Nano Transceiver v2.0
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Western Digital My Passport 070B 319.37 GB
        S.M.A.R.T. Status: Verified
        EFI (disk2s1) <not mounted> : 210 MB
        NATURE2020 (disk2s2) /Volumes/NATURE2020 : 319.03 GB (169.27 GB free)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [failed]    com.apple.security.cloudkeychainproxy.plist
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.ctkd.plist
    [failed]    com.apple.icloud.findmydeviced.plist
    [failed]    com.apple.nehelper.plist
    [failed]    com.apple.nsurlsessiond.plist
    [failed]    com.apple.wdhelper.plist
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [running]    com.adobe.AdobeCreativeCloud.plist Support
    [loaded]    com.adobe.CS5ServiceManager.plist Support
    [running]    com.hp.productresearch.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [invalid?]    com.adobe.SwitchBoard.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
    [running]    com.surteesstudios.hddfancontroldaemon.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.adobe.ARM.[...].plist Support
    [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
    [loaded]    com.google.keystone.agent.plist Support
User Login Items: ℹ️
    GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
    iTunesHelper    UNKNOWN (missing value)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Google Drive    ApplicationHidden (/Applications/Google Drive.app)
    Dropbox    ApplicationHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
    CouponPrinter-FireFox_v2: Version: Version 1.1.6
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Safari Extensions: ℹ️
    AllMyTube
3rd Party Preference Panes: ℹ️
    Flash Player Support
    Growl Support
    HDD Fan Control Support
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        SuperCool: Disk size: 510.88 GB Disk used: 190.66 GB
    Destinations:
        NATURE2020 [Local]
        Total size: 319.03 GB
        Total number of backups: 4
        Oldest backup: 2014-09-10 17:52:44 +0000
        Last backup: 2014-11-19 21:23:34 +0000
        Size of backup disk: Too small
            Backup size 319.03 GB < (Disk used 190.66 GB X 3)
Top Processes by CPU: ℹ️
        22%    mds
         6%    WindowServer
         4%    Creative Cloud
         3%    Dropbox
         0%    Google Drive
Top Processes by Memory: ℹ️
    223 MB    Finder
    137 MB    mds_stores
    120 MB    Dropbox
    86 MB    Creative Cloud
    86 MB    WindowServer
Virtual Memory Information: ℹ️
    2.08 GB    Free RAM
    2.82 GB    Active RAM
    1.64 GB    Inactive RAM
    1.59 GB    Wired RAM
    14.83 GB    Page-ins
    2.06 GB    Page-outs

Lex...
Here's the new EtreCheck that I just ran. At a glance, it seems I may have missed deleting some things or they are stored in an additional location? I haven't jumped into anything yet to really test if there's a difference in performance for me. Once I do I will post that information.
EtreCheck version: 2.0.11 (98)
Report generated December 3, 2014 at 8:46:56 AM EST
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Verified)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 12:43:15
Disk Information: ℹ️
    Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        SuperCool (disk1) / [Startup]: 510.88 GB (322.45 GB free)
            Core Storage: disk0s2 511.25 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Microsoft Microsoft® Nano Transceiver v2.0
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [running]    com.adobe.AdobeCreativeCloud.plist Support
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist Support
    [loaded]    com.google.keystone.agent.plist Support
User Login Items: ℹ️
    None
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
    Default Browser: Version: 600 - SDK 10.10
    SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes: ℹ️
    Flash Player Support
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        SuperCool: Disk size: 510.88 GB Disk used: 188.43 GB
    Destinations:
        NATURE2020 [Local]
        Total size: 319.03 GB
        Total number of backups: 4
        Oldest backup: 2014-09-10 17:52:44 +0000
        Last backup: 2014-11-19 21:23:34 +0000
        Size of backup disk: Too small
            Backup size 319.03 GB < (Disk used 188.43 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         1%    launchservicesd
         0%    launchd
         0%    fontd
         0%    Core Sync
Top Processes by Memory: ℹ️
    103 MB    mds_stores
    86 MB    Creative Cloud
    86 MB    Finder
    77 MB    WindowServer
    60 MB    systemstatsd
Virtual Memory Information: ℹ️
    3.93 GB    Free RAM
    2.28 GB    Active RAM
    900 MB    Inactive RAM
    1.48 GB    Wired RAM
    2.25 GB    Page-ins
    0 B    Page-outs

Why is my macbook pro is still using a lot of RAM?

I have a Macbook pro 15" (mid 2012) 2.6 GHz and with 16gb RAM and was wondering why my macbook pro still processes and uses over 9GB of ram when I'm not even having Lightroom, Photoshop, and Illustrator in effect yet.

It's not a memory leak, see the references to learn more about how RAM is utilized to speed up the Mac.
OS X Mavericks: About Activity Monitor - Apple Support
http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/
http://macs.about.com/od/macoperatingsystems/fl/Understanding-Compressed-Memory- in-OS-X.htm

HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process

Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

JohnCullison wrote:
For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

The article below, although written for Mavericks, applies to Yosemite as well.
http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/

Skype using High levels of RAM over time

So recently i've noticed that Skype has been using increased levels of RAM over time. Before i think 7.1 it sat at a steady 170k or lower but since the recent update, it seems to scale all the way up to nearly using 80% of my RAM after being on for an hour. Is there a reason this happens or is it a memory leak issue?

Hi,
I'm having the same issue as you.
For my situation, with Windows 7 Ultimate 64bit, with 8 GB of RAM available, Skype use randomly from 400 Mb to 1.5 Gb of Ram slowing down all the PC..
I have to kill the Skype process for working well.
My SKYPE version is 7.3.0.101.
I need to resolve this problem (and, from my point of view, uninstall the newest version and install the older one is not a solution)
Thanks in advance
Andrea

How to find memory taken by a process using top command

I wanted to know how to find the memory taken by a process using top command. The output of the top command is as follows as an example:
Mem: 13333364k total, 13238904k used, 94460k free, 623640k buffers
Swap: 25165816k total, 112k used, 25165704k free, 4572904k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
16514 applmgr 25 0 2197m 1.7g 10m S 0.3 13.0 15:20.67 java
30692 crestelo 22 0 2901m 1.4g 9284 S 0.0 11.0 3:03.68 java
30431 crestelo 25 0 2043m 1.4g 161m S 50.9 11.0 79:02.73 java
30869 crestelo 25 0 2860m 1.2g 9292 S 0.0 9.6 7:11.18 java
16655 applmgr 23 0 1934m 1.1g 10m S 0.3 8.9 2:17.49 java
16319 crestelo 19 0 1541m 299m 44m S 0.0 2.3 2:52.11 java
I hope, my question is clear as to how to find the memory taken by a process using top command.
Please revert with the reply to my query.
Regards

Have you tried "man top" to see the documentation for the top command?
How about the following: http://lmgtfy.com/?q=show+memory+with+top+command
The 5th column (VIRT) shows the amount of RAM + swap
The 6th column (RES) shows RAM
The 7th column (SHR) shows memory shared between processes

MM downpayment process using ME2DP - result list

Hi,
I have a question/problem.
The downpayment process using ME2DP works fine so far. But if I have finished a purchasing process by posting the down payment, the goods receipt and the final invoice, why is the PO not disappearing from the ME2DP list (the status lights are gone and the line shows 0,00 down payment)?
Best Regards,
Florian

Hi j-tt,
this should certainly work. However ... if instead of Name you select the distinguishedName, you could use the whole dn as searchbase, instead of the construct you are currently using. Here's an Example after some slight rewrite:
# Import the Active Directory Modules
Import-Module ActiveDirectory
# Grab all sub-OUs of the Search-Base, then retrieve their DistinguishedNames and Names
Get-ADOrganizationalUnit -Filter "*" -SearchBase "OU=Servers,OU=FABRIC,dc=domain,dc=subdomain,dc=address,dc=com" -SearchScope OneLeve | Select Name, DistinguishedName | ForEach{
# Save OU into Variable
$OU = $_.Name
# For each OU found, get all contained computers, extract their DNSHostnames and pass those into the script
Get-ADComputer -SearchBase $_.DistinguishedName -Filter "*" | Select -ExpandProperty DNSHostname | c:\temp\Set-Rdg.ps1 -Pattern '(..)' -Taxonomy "dc=domain,dc=subdomain,dc=address,dc=com", "FABRIC", $OU -nobackup
I'll admit I might have gone a bit wild with the pipelines here :)
Cheers,
Fred
Edit: Fixed my shortened Version to include the Taxonomy parameters
There's no place like 127.0.0.1

RAC node process using 25% physical memory

We have a QA server is non-RAC, and production is two-node RAC. We have a migration app that does an INSERT from SELECT over 2 instances. All of the machines have been in successful day-to-day use for several months...our only troublespot seems to be the migration app.
Today we started the app on the QA server and watched the oracle processes using top. They ran normally and finished without any problems.
The same app started on either of the RAC nodes produced process memory errors and died.
As the app ran, there was a process reading the data from the source instance and a process writing to the target instance. We confirmed this by querying the session data. It doesn't matter which of the nodes runs which target process...the result is the same.
The reading process(session) on the source instance seems to run normally. The write process on the target instance, however, begins slowly accumulating memory in about 16M chunks and holds on to them.
We saw this in the RES and in the MEM columns of top. The target process never released any memory, but slowly grabbed it until its
RES was 4GB and the %MEM was about 30%. The app then died with process memory error. This is reproducible over several runs.
( Per Metalink Note 567506.1, the recommended value for Linux 64-bit is 4294967295 ..we have that set. )
There are other oracle processes and instances running on both nodes which do not seem to be affected. The total number of processes on each machine is around 750..much lower than the nprocs ulimit of 63K.
These process are both oracle sessions spawned by the app.
I haven't seen any info on the web or Metalink that matches these symptoms, so I thought I'd try the experts.
Why would the write session continuously use up physical memory, but only on RAC nodes?
We are running RHEL5 on Dell Poweredge 2950 w 16K Physical mem. Version of 10g is R2.0.4.

user12017889 wrote:
The write process on the target instance, however, begins slowly accumulating memory in about 16M chunks and holds on to them.Exactly what process is this? An Oracle server process? Dedicated or shared server?
We saw this in the RES and in the MEM columns of top. The target process never released any memory, but slowly grabbed it until its
RES was 4GB and the %MEM was about 30%. How does the writer process work? Does it use PL/SQL? Does it use bulk processing? How does it call the reader process? Or does the reader process call it? Is this over a database link.
The app then died with process memory error. This is reproducible over several runs.If this is an Oracle server process, then there should be an entry in the alert log of the instance that recorded the crash and includes the name of the trace file generated by the crash.

Error testing my Business Process using Application View Control

Hi there
i'm using WLS 8.1 SP 4 and Sap Adapter 8.1
I already could build my app view in app integration design console I can testing and everything works fine.
I'm using adpater to sap and i able to see the results from SAP
Now,,, i alreade created my app view control in order to use it in my business process but i get the following error:
<Mar 3, 2006 10:34:53 AM CST> <Warning> <WLW> <000000> <Id=appViewControlTPA:0;
Method=jpd.TPAAppView.serviceTPACompanyList(); Failure=com.bea.wlai.client.Appli
cationViewException: Error invoking service 'serviceTPACompanyList' on Applicati
onView 'TPAAppView': com.bea.xml.XmlException: Top level QName: {wlai/TPAAppView
serviceTPACompanyListBAPI_COMPANYCODE_GETLIST_request}CompanyCode.GetList.Resp
onse does not match the expected top level qname: {wlai/TPAAppView_serviceTPACom
panyList_BAPI_COMPANYCODE_GETLIST_response}CompanyCode.GetList.Response in schem
a type
com.bea.xml.XmlException: Top level QName: {wlai/TPAAppView_serviceTPACompanyLis
t_BAPI_COMPANYCODE_GETLIST_request}CompanyCode.GetList.Response does not match t
he expected top level qname: {wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANY
CODE_GETLIST_response}CompanyCode.GetList.Response in schema type
at com.bea.wli.variables.XmlObjectVariableFactory.createProxy(Lcom.bea.w
li.variables.ProcessXML;Ljava.lang.Class;Z)Lcom.bea.xml.XmlObject;(XmlObjectVari
ableFactory.java:137)
at com.bea.wli.variables.XmlObjectVariableFactory.createProxy(Lcom.bea.w
li.variables.ProcessXML;Ljava.lang.Class;)Lcom.bea.xml.XmlObject;(XmlObjectVaria
bleFactory.java:199).............
these are my schemas:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema elementFormDefault="unqualified"
targetNamespace="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_request"
xmlns="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_request"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:complexType name="BAPI0002_1">
<xsd:sequence>
<xsd:element name="COMP_CODE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="COMP_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="25"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="CompanyCode.GetList">
<xsd:complexType>
<xsd:all>
<xsd:element minOccurs="0"
name="COMPANYCODE_LIST">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded"
minOccurs="0"
name="item"
type="BAPI0002_1"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema elementFormDefault="unqualified"
targetNamespace="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_response"
xmlns="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_response"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:complexType name="BAPIRETURN">
<xsd:sequence>
<xsd:element name="TYPE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="5"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MESSAGE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="220"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOG_NO">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="20"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOG_MSG_NO">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="6"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MESSAGE_V1">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MESSAGE_V2">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MESSAGE_V3">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MESSAGE_V4">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="BAPI0002_1">
<xsd:sequence>
<xsd:element name="COMP_CODE">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="COMP_NAME">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="25"/>
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="CompanyCode.GetList.Response">
<xsd:complexType>
<xsd:all>
<xsd:element minOccurs="0"
name="RETURN"
type="BAPIRETURN"/>
<xsd:element minOccurs="0"
name="COMPANYCODE_LIST">
<xsd:complexType>
<xsd:sequence>
<xsd:element maxOccurs="unbounded"
minOccurs="0"
name="item"
type="BAPI0002_1"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
</xsd:schema>
and this is my xml i'm using as a request:
<?xml version="1.0" encoding="UTF-8"?>
<n1:CompanyCode.GetList xmlns:n1="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_request" xmlns:xsi="http://www.w3.org/2001/XMLSchema" xsi:schemaLocation="wlai/TPAAppView_serviceTPACompanyList_BAPI_COMPANYCODE_GETLIST_request">
     <COMPANYCODE_LIST>
          <item>
               <COMP_CODE/>
               <COMP_NAME/>
          </item>
     </COMPANYCODE_LIST>
</n1:CompanyCode.GetList>
i do not what it is wrong and i don't understand why i can test my app view since app int desing console succesfully but i get an error running my business process using workshop
any idea?

Try to send some valid data in COMP_CODE.
It seems that SAP is returning some reply which is not fitting your response Schema.
SAP Call is made and problem is in generating response document.
Use the design console to test the view again. and try to see the XML resquest document and response document. Compare your request xml with that in design console.

IU Elim. "No data found for processing using current selection conditions""

Dear Experts,
While Executing task of Interunit elimination in Consolidation Montior I am getting Message "No data found for processing using current selection conditions"
Ex. is
A)
In Unit X
GL (399999) Account     Dr. 65000 (Customer Recon. Ac.)   (with Trading Parter X)
GL (499999) Rev.A/c           65000 (with Trading Parter X)
In Unit Y
GL (199999) Exp. A/c     Dr. 65000   (with Trading Parter Y)
GL (299999).Account           65000 (Vendor Recon. Ac.) (with Trading Parter Y)
B) GLs in info cube in 0FIGL_C01 are :-
GL Account---CCode--Trading PartnerDebit--
Credit
199999--YY65000-----00000
299999--YY00000-----65000
399999--XX65000-----00000
499999--XX00000-----65000
In COnsolidation WorkBench
1) I have created Document Type
2) Method-
In General Tab
   a) Two SIded Selection
    b) Per Transaction Currency Selected
In Selection Tab
1St Selection
GL Account = 299999 (Customer Recon. Account)
Company    = X
Trading Partner = X
1St Selection
GL Account = 399999 (Vendor Recon. Account)
Company    = Y
Trading Partner = Y
Difference Tab
a) Post Diff to "Unit from Selection 1"
b) Key Figure "Period Value GC
c) Check Limit Per Difference Row
Other Differnce
GL Account = 100099 (Other GL)
Currencyce Diff
GL Account = 100510 (Other GL)
Question :-
1) Is the posting is appropriate and does it attracts IU Elimination?
2) The Infocube Details are correct?
3) Any Config issue
May any one suggest, Why Am I not able to get the data?
Thanks
Rakesh Shrivastav

Dear Sir,
Following are the View at my end in context to your suggestion
1. check the BCS totals data to ensure trading partner is included.
THis is the view of Source Info Cube 0FIGL_C01
GL Account---CCode--Trading PartnerDebit--
Credit
199999--YY65000-----00000
299999--YY00000-----65000
399999--XX65000-----00000
499999--XX00000-----65000
2. Execute the task for the cons group that includes both cons units X and Y
The COns Group Is XYZ
X- Cons Unit
Y- Cons Unit
In Cons Monitor I am executing Test run at XYZ level
3. Although the trading partner for cons unit X should be Y and vice versa, the elimination should still occur with the cons unit X and trading partner X records.
Same as the query description
4. make sure that the items 199999, 299999, 399999 and 499999 are included in the elimination method for either selection 1 or selection 2.
The Method Selection Tab View is
1St Selection
GL Account = 299999,199999
Company = Y
TP = Y
2Nd Selection
GL Account = 399999,499999
Company = X
TP = X
What is your View On That?

Approach to create a generic Approval process using SOA human workflow ?

Hello Experts,
I'm looking to create a generic approval process using oracle soa human workflow component using JDev 11.1.1.5
Have about 7-8 existing applications which do some kind of 'approval' . So need to create a generic solution for all 7-8 applications, instead of users logging into 7-8 different applications to approve by logging into different systems. Just want to have like a 'one stop shop' , where i can just go and approve for any application without having to log into separate applications.
I'm looking to get some suggestions and ideas, on how I can achieve this functionality ... Any suggestions/ideas are appreciated .
Thanks a lot.

Hello,
you can find multiple sample on the web like those
http://www.splessons.com/2013/12/create-state-machine-workflow-in-sharepoint-2013-using-visual-studio-2012/
http://msdn.microsoft.com/en-us/library/ee231606.aspx
I don't think that's very different using VS2013 or VS2012
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

"airport" process uses all of the memory an cpu

After I reinstalled my MacBook and updated to the latest version of Tiger (10.4.8) my airport network behaves very strange. When I boot my MacBook or disconnect/connect my Airport network a process called "airport" is consuming all the CPU and memory. It uses one core exclusivly and gows to 1,2 GByte of RAM (even more virtual Memory). This slows down the macbook to almost still and heats up the CPU.
The only thing I can do is to kill the process. Then everything works fine. But this is annoying.
It seems to make no difference if I use a wireless LAN or not. When airport is enabled then this bug occurs.

On this thread,
http://discussions.apple.com/thread.jspa?messageID=349
2852, people that have Check Point Software's
SecureClient are reporting the airport process using
~95% of CPU time.
I had SecureClient installed and I can confirm that
if you uninstall SecureClient, the airport process
works normally again. I don't know if this is the
only source of this problem, but if you happen to
have SecureClient, then you might want to uninstall
and confirm if this solves your problem.
Also I would be curious if anyone is having this
problem that has never had SecureClient, or any 3rd
party VPN software.
I can confirm that at least some of my problem with the "airport" process was related to VPN software. After uninstalling the Cisco VPN client, problems dramatically reduced. Interestingly, I still have the Checkpoint client installed, but only rarely see problems with "airport".
MBP 2.0 GHz Mac OS X (10.4.8)

PS uses scratch disk over RAM

Hi!
My Photoshop seems to use scratch disk instead of RAM.
Here's the scenario: I open up a file, convert it to a smart object and begin tiling it in a new document.
In task manager the memory usage for Photoshop.exe doesn't grov very much, it's around 300mb when I've duplicated my picture a few times. My scratch disk however has a temp file weighing 5gb! Task manager says also that the total usage of my physical memory is only 23%.
I have 8gb of RAM installed and I have my Memory Usage Settings set to Let Photoshop Use 5.4gb.
Now why is it that Photoshop uses my scratch disk even though I have lots of free RAM available? I thought Photoshop only uses scratch disk when the RAM is full?
I have Windows 7 64-bit with Photoshop CS5.

antevante wrote:
Now why is it that Photoshop uses my scratch disk even though I have lots of free RAM available? I thought Photoshop only uses scratch disk when the RAM is full?
It's unclear how big a file you are talking about-doesn't seem to be very big? Photoshop by default will always allocate scratch disk space upon launch. Whether or not it uses it depends on how much ram you have and how big the image is. Photoshop tries to keep it's operations in ram and only goes out to the scratch disk when needed.
However, Photoshop always uses scratch disk space to track history. If the history step is only a small area tile it doesn't take up much space. If it's the whole document, history can very quickly suck up the scratch disk space. By default the History is set to 20 steps, if you do something involving the entire file, the scratch disk usage could end up being 20X the original file size depending on the number of steps you have in history. Note, the History feature doesn't actually steal ram from Photoshop...it's only writing to the scratch disk but it can get real big real quick and you've found out.

Wich Brands use Apple use for HDDs and RAMS? Whats about Blu-Ray and Players?

Hard Disks Brands for Example:
Western Digital, Seagate, Samsung, Hitachi, Maxtor, Corsair, Fujitsu, Plextor, Buffallo, Iomega, Intenso, Teac, Trekstor, Toshiba, Verbatim, Sandsk ???
Rams Brands Example:
Corsair, G-Skill, G.E.IL, OCZ, Kingston, Mushkin, Infineon, HP, LaCie, Verbatim, Sandisk, Sharkoon, Crucial, Extrem Memory, Lenovo, Patriot, Team Group, Transcend, Lenovo, Dolphin, Excelram, Silicon Power ???
When Apple Blu-Ray will support Mac OS X and and why there are no available? Otherwise I think apple cool even the concept, design and Operating System. Because of that i have to use Windows, BootCamp Parallels. Why thaht? Give us a Blu-Ray Player and supports in Mac Os without those other three thinks. Microsoft an Windows ***** ;-)

Apple uses a variety of sources for RAM and HD's, even though two machines can have identical specifications they can use different vendors for common products such as RAM and HD's.
Apple currently does not support Blue-ray and has not announced any plans to do so. Per the terms of use we all agreed to by joining this forum we cannot speculate on future products or speculate on Apple decisions. The terms of use say:
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.
Roger

"socketfilterfw" process using 2.25 GB RAM- Why?

Similar Messages

Maybe you are looking for