Software Center reporting question

Usually when I push out MS updates they would usually show up in the software center under "Installed software" it doesn't show anything after the updates are installed.  It does shows up in windows update under "view update history".
MSB

Correct. That's default behavior.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

  • Software center reports application installed even though it has not installed

    So basically we are deploying updates for an application. We re-bundle the application installation .exe into an .msi using EMCO repackage. our deployments work in a test environment,  but when we deploy to the production environment it fails. On that
    note it fails with the software center saying it installed the software please see link. 
    I am completely baffled by what is going wrong here. My test environment is only four virtual desktops and the company deployment group in like 70 desktops both are located in the same building. My SCCM12 instance is in a remote location connected via VPN.
    The deployment package size is about 60Mb the software manager reports the package was only 1Mb.  I do not have a copy of a users execmgr.log file as of yet but i will examine and post as soon as I get a copy of one. Any initial help or point in the right
    direction is appreciated.
    I apologize for the lack of visual aid. The forum would not let me post the screen shots I have nor could i link back to my oneDrive.
    Best regards,
    Brett

    Look in the "appenforce.log". It will tell you the exit code, also check the appdiscovery.log to determine the detection is passing or failing. Normally a MSI will use the ProductID by default. The detection method can be viewed/changed looking
    at the deployment package.
    Any reason why you need to deploy this via MSI? Does the exe not have switches to run the install, because you can define your own detection to detect if an exe installed correctly.
    Edit - Exit code 0 means successful, 3010 also but also telling ccmexec that a reboot is required. Anything else would tell ccmexec that it failed. Also, what you will learn here is that SCCM delivers the installation and commands for the install however
    the installer (the MSI) is responsible for all the work after that. SCCM just monitors the install for success/fail.

  • Query or Report Showing Machines/Users Who Have Opted Out of the Power Management Settings via Software Center

    Is there a record in the DB of machines which have been opted out of power management? In other words i want a report of machines that have the tick box for 'Do not apply power settings from my IT department to this computer' in Software Center.
    Thank you.

    Hmmmm, i should have had a coffee before submitting this question!
    The report is a default one:
    Home > ConfigMgr_[site_code] > Power Management > Power Management - Computers excluded 

  • SCCM 2012 - Software Center Installation Log / Report

    Hi there,
    does anyone know how to check the amount of installations via software center?
    for example i would like to see a log/report how many clients accessed software center and installed applications.
    would be also great to see the top10 list of applications being installed, etc.
    is there something a like?

    There's no usage data of software center. You could query data listed in add/remove programs using SRS, but you would have to be very creative to find a way to determine the top 10 installation list.
    Torsten Meringer | http://www.mssccmfaq.de
    thats too bad though, but thank you very much for your reply.
    this will get on my wishlist for sccm 2014

  • Software Center Question

    We can advertise any .MSI to "all systems" and workstations can see them in the Software Center.  But when any Package (.exe) is advertised to all systems no one can see it in Software Center.  is that by design?  how do you see
    packages in the software center?
    mqh7

    Take a look at this link for a good explanation of what shows in software center and when:
    http://blogs.technet.com/b/configmgrteam/archive/2012/03/31/introducing-the-application-catalog-and-software-center-in-system-center-2012-configuration-manager.aspx
    It comes down to what you are deploying and what type of deployment.  Also look at user experience settings on the program.
    Jeff

  • Software Center shows all apps as "1 MB" in size

    Would like to report what we believe to be a GUI BUG in Software Center - that all programs are incorrectly showing "less than 1 MB". Althought it appears to be a GUI bug, it is rather unnerving for some Techs and generate several unnecessary Questions
    to us in the CM admins group. It does show the correct size, if we manually click on each and every program/App.
    Is it known by MS? Is there a coming Update that fixes the issue?
    Many thanks for any help
    Justin Nichols MCSE

    I'm using R2 CU2 and have the same problem. This issue is not fixed.
    I justed filled that as a Connect bug. You can track the response from MS there and feel free to upvote it.
    https://connect.microsoft.com/ConfigurationManagervnext/feedbackdetail/view/973329
    Benoit Lecours | Blog: System Center Dudes

  • Software Center error. 0x80041013 (-2147217389)

    Hi.
    When some of our users open Software Center they get this error:
    Software Center cannot get the current status for some of the software. Software Center will list any items with available status. You can press F5 to refresh the view. If the problem persists, contact your help desk.
    More information:
    Loading Software Center teturned error code 0x0041013 (-2147217389).
    If they try to start an application via the link "Find additional applications from the Application Catalog" the get this error from
    SCClient_XXX@xxx_.log file under c:\windows\CCM\logs:
    Exception Microsoft.SoftwareCenter.Client.Data.WmiException: Provider load failure    (Microsoft.SoftwareCenter.Client.Common.ClientUXMain at RetreiveDataComplete)
    The error code is ProviderLoadFailure   (Microsoft.SoftwareCenter.Client.Data.WmiException at get_ErrorCode)
    I have tried to uninstall the SCCM client, cleaned up everything and installed the client again. Tried to reset repository under c:\windows\system32\wbem and installed the client again with no luck.
    Any ideas?
    Thanks.
    MHem

    see
    http://blogs.technet.com/b/configmgrteam/archive/2009/05/08/wmi-troubleshooting-tips.aspx
    it's an older article, but very likely to be useful.
    Note that ConfigMgr2012 clients should be running a nightly ccmeval, which includes an auto-diagnostic of WMI, so, is ccmeval running? Reporting success/health?
    Also, this article describes how to re-register the DLLs and recompile MOFs:
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    based on the symptom you've mentioned, you need to focus on if the WMI repository is healthy or not, and, if the underlying WMI system (providers, registrations) is healthy.
    When you uninstall CCM, the CCM namespace should get deleted, and when you reinstall, the CCM namespace gets re-created, but, if the providers or underlying WMI system is unhealthy, the CCM namespace may not be useable.
    Is Windows itself healthy? Has something bad happened to a dependency? Other errors in the event logs?
    As Joyce says, check the client installation logs to see if related errors were logged when the client installation occurred.
    As an example (similar symptom):
    http://social.technet.microsoft.com/wiki/contents/articles/14408.troubleshooting-fim-wmi-provider-load-failure.aspx
    In this case, something has changed the ACL, causing the provider to be access_denied.
    Do you have custom security policies, or security products, which could be denying the service access to the provider?
    Another set of hints/tips here:
    http://stackoverflow.com/questions/563150/how-can-i-resolve-a-provider-load-failure-for-wmi-requests
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Profit Center Report and P&L difference

    Hi Experts,
    I have setup the following scenario with Profit Centers:
    I created a Profit Center called 'A' and another called 'B'.
    Then I created a Distribution rule 'AB' directly allocates 75% to A and 25% to B.
    I added an Invoice for a line total of $100 and used this Distribution Rule. This did pull through to the Journal Entry.
    My question is regarding the Profit and Loss Statement that will not pick up the Profit Center 'A' when I specify this in the Expanded button. This will however pick up the 'AB" for the total amount of $100.
    I would have thought that if I ran this only for 'A', I'll see the value $75 in the P&L....
    I looked at the Profit Center Report for this invoice and there I could see the $75 for the Profit Center 'A'.
    Please let me know what I'm missing, or if you are not able to see seperate Profit Centers in the P&L.
    Regards,
    Marli

    Hello Marli - are you running the Profit Center Report which shows that information???
    Path of Finances > Cost Accounting > Profit Center Report...
    I do not belive the profit center is on the Profit and Loss Statement (unless you set up each profit center with a specific GL Account Segment)...
    Take care - Zal

  • Profit center report does not show selection criteria

    Hi,
    The SAP Business One software misses a functionality :
    When creating a financial report, you can enter surtain selection criteria in order to shift the data, and in order to get only the relevant data. This is possible in all reports. Also, in the result of all reports, those selection criteria are shown. In that case you actually know what the data is all about.
    This is not the case with the profit center report. When you run the report with e.g a date selection, these dates are not printed on the actual report. When a second person views the report, he/she has no clue as to what the data consists of, they are unaware of the selection criteria.
    The only solution is to export this to excel, or run Chrystal reports. But this should be entered into the standard report !!
    Hopefully, you can help me out.
    Kind regards,
    Bas Stortenbeek
    b1 Consulting
    [email protected]
    0043-664 833 8913

    Hi
    If you see the screen shot I attached, it has the text "(new)" against the Folder name...
    All new gl reports are under such a folder to differentiate... You cant deactivate any reports from the Standard Menu... You can just control it by authrization....
    You can also ask your BASIS guy to display only the authorized trans on the user screen so that they are not able to see the std set of transactions
    Br, Ajay M

  • Print Sort Code in Profit Center Report

    Hi,
    i'd like to print the field Sort Code in the 'Profit Center Report by Linked Accounts', from Profit Centre Report, but i'm not able to do.
    I can see Profit Centre field, and Name field, but not the Sort Code.
    There is a way?
    Thank you very much.
    Regards
    Marco

    Hi,
    You will still get the answer from ERP financials. SAP Business 1 is simply a preconfigured SAP R3 system with the same modules etc. and this question is very definitely a financial module problem.
    I am sure that you will get the answer there.
    Good luck
    Steve B

  • How to clear/reset "Installed Software" in Software Center?

    Hello! 
    I've done a big mistake with my application objects! 
    I did have two applications in SCCM 2012 with the same MSI-installation package. The reason for this is because i would like to have one that is deployed as Required (with primary device) and one that is deployed as Available for those without primary device. 
    Then I decided to only keep the available deployment, so i deleted the required appilcation entierly from SCCM. 
    Not so wise because now all the required installations is stucked in Software Center, at the "Installed Software"-tab. And there is noway to remove it.
    So my question is, is there someway to reset or clear the information from software center? Or any other sulotion to my problem? :) 
    Best regards,
    Johan Lång

    It seems like it has removed the entries from the software client automatically now. But I still got problem with the main source of the problem. That I cant push out updates via software center.
    Let me explain the main problem. 
    I had app1 as a MSI, and two application objects (AO). One AO as required and one as available, but the same MSI. 
    After a while I got an integration-application between app1 and another program, as a MSI so i decided to put that as a dependency to app1, but also pushed it out to all users as a required deployment, because it would not install it otherwise, if not the user
    did an uninstall and then a fresh install of app1.
    And for a couple of weeks ago I got my eyes on "automatically update any superseeded applications" while deploying. So i decided to use that with one AO instead of two (required/available). In the same time an update came to app1, lets call it
    app1.1. 
    This was a perfect time to try my new discover and disabled app1 and superseeded it with app1.1 with a available deployment, with a dependency of the integration-application. 
    But the clients could not be updated automatically and when the user tried to update it manually via application catalog it get stucked at the last step "evaluate" before it jumps over to Software Center. And nothing else happen. Until it crasches
    and warn about "it could not be evaluated" in the application catalog. Sometimes it pops up anyway in software center but it wont continue to install, and if you try to manually start the installation it get stucked at the status "Waiting"
    and nothing happens. 
    If I login with another user I can start the installation manually and it works fine.
    If I uninstall the sccm-client and install it back again, the "installed software" will be cleared and I can start the installations manually, so it pops up under "installed software" again. Without any problems. 
    It also worked to install if i removed the dependency of the integration-application.
    So my guess is that something is getting corrupted in the user profile, but I cant find any files regarding sccm in there exept the log file for software center. 
    I hope you understand abit of what i try to explain :) Sorry for bad grammar!
    Regards,
    Johan

  • Profit Center Reports / drill down to assigned internal orders

    Hello guys,
    our company does project business. Our project landscape has been implemented in SAP using a profit-center-structure for reporting purpose and internal orders for every project.
    The internal orders (projects) are assigned to a profit center belonging to the conducting profit-center-group (responsible department).
    Question 1:
    Further development of Profit CenterReport S_ALR_87013340 allowing for a drill down from the profit centers to the actual projects that have been assigned to that profit centers.
    Currently (standard report) each profit center can only be watched in a cumulated way. Since many projects can be assigned to one profit center a drill down to the actual project is required.
    Question 2:
    Currently the desired report Profit Center Report S_ALR_87013340 shows the balance. It is desired to see only the cost incurred on the projects, not the settlement. The report should only show pre-selected cost elements. How can we exclude certain cost elements?
    Could you please give us some hints how to handle our issues?
    Regards

    Hi,
    Question 2:
    Currently the desired report Profit Center Report S_ALR_87013340 shows the balance. It is desired to see only the cost incurred on the projects, not the settlement. The report should only show pre-selected cost elements. How can we exclude certain cost elements?
    A1: you can created cost elements(account group) with selected cost elements and use same group in report.
    Or
    A2:enter only selected cost elements in report P&L account group in multiple selection.
    Thanks,
    Rau

  • Regarding Profit center Reporting

    Dear All,
    I am stucked up at the point where my profit center reports are not coming as i desired.My client wants the reports as per their product line for that purpose i have treated all his product lines as a profit center & group them as per the products to be produced in the same company but at different plants. For Example for 1000 co.code there area three plants & there product lines are A, B ,C & D out of the three plants A product is produced in all three plants, while B product is produced in only one plant & C & D are produce at two of the plants under same co.code.
    for this scenario i have treated those product lines as my profit centers & further also group them as follows
    Group A - Where ever A product is produced (in this i have taken three profit centers of A product which is produced in all the three plants
    Group B -Where ever B product is produced (in this i have taken one profit center of B product which is produced in only one plant )
    Group C-Where ever C product is produced (in this i have taken two profit centers of C product which is produced in all the two plants )
    Group D-Where ever D product is produced (in this i have taken two profit centers of D product which is produced in all the two plants )
    After doing this i assigned all of them to the Dummy Profit center & all my cost centers are also assigned to dummy profit center But now i am not getting my reports right as all the transactions are going to dummy profit center & Is it possible to transfer these transactions to individual profit center & get the Reports Correctly ? If, yes tell me the Way how to do it .
    Please help me in this regard
    Thanking You in Advance
    Santosh Rothe

    Prerequisites for Transferring Actual Data
    Before you can transfer data to Profit Center Accounting, you need to assign your CO objects and your material masters to profit centers.
    When you post subsequently, the posting is made to dynamically derived profit centers (from CO objects) or to the profit center set at the time of the original posting (such as materials).
    You also need to create your own accounts in Profit Center Accounting in order to be able to reflect goods movements between profit centers. You do this in Customizing.
    It may also be useful to assign a revenue or sales deduction account to a profit center. For more information, see the section Cash Discount Expenses/Income and Exchange Rate Differences .
    In the standard system, the following posting rules apply:
    · All the postings made to a cost element are transferred to Profit Center Accounting. If it does not find a profit center, the system posts the data to a dummy profit center  to ensure that the profit‑relevant data is complete in Profit Center Accounting.
    · If an account is a profit and loss account but not a cost element, the system transfers all the postings where the lines contain a profit center. For profit and loss accounts from logistics activities, the system determines the profit center based on the logistics objects involved, such as the production order (for work in process) or material (for price changes or inventory differences). If no profit center can be found, the system transfers the data to the dummy profit center.
    · The payables and receivables from the period in question are transferred to Profit Center Accounting. Other balance sheet and profit and loss accounts can be chosen from a Customizing table. The accounts are updated to the profit center specified or to a default profit center specified in the table.

  • Table for Profit center report grp

    Dear Sapgurs,
    in this t code GR55 system it showing list of Profit center report grps, can u please tell me what is the table for Table for Profit center report grp and how to create new profit center report group, Once we will click on F1 system it shows structure not tables.
    Reg
    Hanu
    Moderator: Please, search SDN. This questions has been answered several times.

    EC-PCA (KE1)         Profit Center Accounting
    CEPC                 Profit Center Master Data Table   MANDT / PRCTR / DATBI / KOKRS
    CEPCT                Texts for Profit Center Master Da MANDT / SPRAS / PRCTR / DATBI
    CEPC_BUKRS           Assignment of Profit Center to a  MANDT / KOKRS / PRCTR / BUKRS
    GLPCA                EC-PCA: Actual Line Items         RCLNT / GL_SIRID
    GLPCC                EC-PCA: Transaction Attributes    MANDT / OBJNR
    GLPCO                EC-PCA: Object Table for Account  MANDT / OBJNR
    GLPCP                EC-PCA: Plan Line Items           RCLNT / GL_SIRID
    thanks & Regards
    Swathi
    Edited by: swathi sajja on Aug 5, 2008 12:08 PM

  • Change currency in cost center report - possible?

    Hi all!
    I have a question regarding currency in cost center report (transaction s_alr_87013611).
    I have created one controlling area with currency SEK. I have allocated several company codes to this controlling area, for example Sweden, France,  Germany etc. I have also created different cost centers and allocated them to the company codes. All cost centers in ever company code have the same currency allocated as for the company code. For Germany currency EUR is allocated to the cost center, to the company code but SEK is allocated to controlling area.
    When I run cost center report reporting currency is SEK. Is there a possibility to change the settings in the report to view cost center currency instead?
    Many thanks in advance!
    BR Åsa

    Hi,
    Yes, it's possible. Use RPC0 transaction to set the currency of the report to object currency.
    Regards,
    Eli

Maybe you are looking for