Software Prerequisites in managed system configuration are not fulfilled

Hello dear Forum,
I'm facing a problem when I configure a PI system in managed system configuration. I register the Netweaver PI AS ABAP technical system to solman's SLD directly(run RZ70), and collect the information of the Netweaver PI AS JAVA from the PI's sld. I don't know whether it matters.
The following error occurs when I Check Prerequisites:
J2EE-FRMW does not fulfill the prerequisites (installed: 7.11 SP0, expected: 7.11 SP001)
But I don't know how to find J2EE-FRMW 7.11 SP001 and do some update, please give me some advice.
Best regards and thanks for your help,
Pany

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

Similar Messages

After software updates - error message- system extensions are not valid

Every time now after installing SL, when apple update installs new software, an error message comes up - system extensions not valid, reinstall or ask the system administrator. it then goes through each extension that is wrong. it appears a lot of them are from oct 2007. What do I do about this?

here are the extensions: most of them that sya are installed incorrectly
AppleK2SATARoot.kext
AppleMPIC.kext
ATIRadeon8500GA.plugin
ATIRadeon9700GA.plugin
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRadeon8500GLDriver.bundle
ATIRadeon9700GLDriver.bundle
GeForce2MXGLDriver.bundle
GeForce3GLDriver.bundle
GeForceFXGLDriver.bundle
ATIRadeonDVDDriver.bundle
AppleAltiVecDVDDriver.bundle
ATIRadeon8500DVDDriver.bundle
ATIRadeon9700DVDDriver.bundle
ATIRadeon8500VADriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeon.kext
ATIRadeon8500.kext
ATIRadeon9700.kext
NVDANV10Hal.kext
NVDANV20Hal.kext
NVDANV30Hal.kext
AppleNDRV
ATINDRV.kext
ATIRNDRV.kext
AudioDeviceTreeUpdater.kext
AppleDallasDriver.kext
IOI2CFamily.kext
IOI2CControllerPMU.kext
IOI2CControllerSMU.kext
IOI2CControllerPPC.kext
zfs.readonly.kext
IOPCCardFamily.kext
IOPlatformFunction.kext
AppleMacRISC2PE.kext
IOI2CPulsar.kext
IOI2CCPUVoltage.kext
IOI2CHWClock.kext
IOI2CSlewClock.kext
AppleHWClock.kext
AppleMaxim6690.kext
AppleMaxim1989.kext
AppleLM7x.kext
AppleLM8x.kext
AppleSMUMonitor.kext
IOI2CMaxim1989.kext
IOI2CMaxim6690.kext
IOI2CAD741x.kext
IOI2CLM6x.kext
IOI2CLM7x.kext
IOI2CLM8x.kext
IOI2CSMUSat.kext
IOI2CMaxim1631.kext
AppleI2S.kext
AppleMacRiscPCI.kext
IOI2CDeviceLMU.kext
AppleLMUController.kext
AppleMacRISC4PE.kext
AppleMediaBay.kext
seatbelt.kext
AppleSym8xx.kext
AppleThermal.kext
AppleCore99NVRAM.kext
AppleVSP.kext
ApplePCCard16ATA.kext
KeyLargoATA.kext
IOADBFamily.kext
ApplePCCardATA.kext
AppleLED.kext
AppleK2SATA.kext
AppleKiwiRoot.kext
AppleKiwiATA.kext
AppleI2SModemFamily.kext
AppleFlashNVRAM.kext
AppleVIA.kext
AppleFPButton.kext
PMUMotionSensor.kext
IOI2CMotionSensor.kext
IOI2CDeviceFCU.kext
AppleFCU.kext
AppleI2C.kext
AppleKauaiATA.kext
AppleKeyLargo.kext
AppleK2.kext
AppleK2Driver.kext
IOKeyLargo.kext
AppleSPU.kext
ApplePMU.kext
CMD646Root.kext
AppleSMU.kext
MacIOGPIO.kext
I2CGPIO.kext
IOI2CDriveBayGPIO.kext
AppleGPIO.kext
AppleK2Fan.kext
IOI2CADT746x.kext
AppleFan.kext
VirtualAudioDriver.kext
AppleLM87.kext

Managed System Configuration - Software version and OS is not accepting

Dear
When i try to setup the PI system in solman 7.1 - Managed system configuration, below the error msg.
Please help to sort it the problem
Regards
Jay

Hi Pany,
Steps to follow
- Rename the J2EEFRMW01_5-20002637.zip file to J2EEFRMW01_5-20002637.SCA.
-telnet localhost 5$$08
-logon with the user administrator
- deploy /software/j2eefrmwpatch/J2EEFRMW01_5-20002637.SCA version_rule=all
- Once it is done , then trigger the data to the SLD
- Checked the software component in SLD
- Resync the LMDB with SLD
- Then performed the activity of manage system Configuration.
With Regards
Ashutosh Chaturvedi

Managed system configuration, step:Check Prerequisites

hi firends,
We've updated our SLM system up to SP13 and import finished success.
When we starts managed system conf from menu SOLMAN_SETUP - Managed System Configuration - Configure System - Check Prerequisites, execution return error that system prerequisites are not fullfilled.
But from menu Status all SP's are correct
Additionally screenshot added to attachment
please help me to resolve this problem.
P.S. all other steps in Managed system conf wizard finished Success.
Thanks in advance
Shahin

Hi Matthias,
Please review SAP Note 1571442 as it might be helpful in resolving this error message.

Managed system Configuration : The JMX metrics of this Host / Byte Code Adapter are missing

Hi Friends
While Configuring EP system with SOLMAN 7.1 SP12 it is giving below message in self Diagnosis Phase.
1. Solman system is already having ISAGENT version 8 and 9 installed (but Managed system is having 8)
2. I have followed the automatic Process as below
==========================================
Automated Installation of the Introscope Agent via SMD
The Solution Manager provides an application that performs the setup of the Introscope
byte code agent for Java automatically. This section explains the steps to run the setup.
Before you can run the Introscope agent setup, the setup wizard for the managed system
must have been executed.
1.
2.
3.
4. Launch the Introscope Setup application: SAP Solution Manager Configuration 
Managed Systems Configuration  Step 7 Configure Automatically  Automatic
Activity “Byte Code Adapter Installation”  “Open Java URL” (only available in edit
mode). Your screen will look similar to the image below:
5. Check the Enterprise Manager Settings at the top of the screen. These are the
connection parameters that will be used by the agent to connect to the Enterprise
Manager.
6. In the pane Introscope Agent Setttings, select the system that you want to instrument
with the agent. Check “select all” and click “Retrieve Current Settings”. This will display
the current status of the agent setup.
7. To initially setup or update the agents, click Setup Introscope Agent …. This will open
the setup dialog as shown below. Select the desired agent version (by default only one
available) and choose the profile. Next, check the desired instrumentation areas, and,
in the case of AIX, review the AIX settings to match your environment (J9 or classic
mode).
8. Finally, hit Apply to perform the necessary changes in the agent configuration. Agent
config files will be adapted and the Java VM parameters will be set as required for the
managed system.
================================================================
3. Restarted SAP but error still present.
Please help to resolve the issue.
Thanks

Found the solution :
1819577 - Workload Analysis data missing for Java systems when using ISAGENT 8.2.4.0
Cause
l This issue has been identified as product defect and documented in note 1273028
Resolution
l As mentioned in note 1273028, update to ISAGENT 8.2.4 Patch 1 timestamp: 2012-06-26, please proceed as described below)
1. Enable the Maintenance Mode in the Agent Administration UI (http://solmanserver:port/smd/AgentAdmin)
2. Deploy the file to the Solution Manager JAVA stack using the Software Deployment Manager (SDM)
3. Disable the Maintenance Mode in the Agent Administration
4. Execute again the activity 'Byte Code Adapter Installation' of the step 'Configure Automatically' in the 'Managed System Configuration' for the
affected systems. This activity will deploy the new version of the
Introscope JAVA agent in the managed system servers and reconfigure the JVM parameters to use the new version of Introscope JAVA
Agent;
5. Check from Introscope Agent Admin if "IS Agent State" contains value "Running but needs restart"
6. Restart the affected managed system(s)
Finally Solution is update your SOLMAN system patch ISAGENT 8.2.4.0 from patch 0 to 1 via SDM.
Thanks
Mukesh

I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

Managed system Configuration Diagnostics Prerequisites check fail

Dear All,
My solman_setup initial configuration part and basic configuration part all passed without error. And when I do the managed system configuration part , first I choose the solution manager itself and the client 001 to config , and then the maintain connection passed OK , but in the next step , check Prerequisites, it fails. The Navigation Button just open a link to the SAP Service Market Place, and the IMG documentation just let me to see the note 1010428. The deatl part of the execuation result of the Prerequisites open a page but with error statement as below :
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any comment will be appreciated.
Enddy.

Hello Enddy,
This sounds as if you have yet to configure the HTTP services in SPRO or have misconfigured them. Please review your configuration for the HTTP Services as it should resolve your issue.
Please review the diagnostics URL to see if it helps you out:
http://service.sap.com/diagnostics
Also, please review the following SAP Notes which will also guide you through diagnostics and solution manager setup/installation:
1010428 End-to-End Diagnostics
1145779 SAP Solution Manager 7.0 Installation
1163836 Solution Manager Diagnostics required for troubleshooting
Also pay attention to the relevant notes listed on the bottom of these. If you follow these documents, I'm sure you will have your issue resolved.
Hope this helps you out!
Thanks,
Mark

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Plug-in status not performed in Managed system configuration

Dear Experts,
I had configured Managed system configuration in SolMan 7.1 SP10. I could find plug-in status " not performed" (grey) in solman_setup screen . Below screenshot for your reference. I had highlighted the plug-in status in blue for easy recognition. Please provide your valuable inputs.
Thanks,
Phani.

Hi Phani,
It is an open issue, pls see below; you might have to hang on till SP12 is available.
1954303 - The Plug-in Status (ST-A/PI) Grey for Managed System In Solution Manager SP10 and SP11.
A fix for this issue is planned for SP12, please note that this is subject to change
Regards,
Vivek

Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Hi,
I have a problem with configuring managed systems in Solution manager using txn solman_setup. When I select the managed system, enter all the data for the READ destination, TMW destination and Back destination and click "Maintain Connection" the system comes back with message:
ST-PI Plugin not up-to-date for managed system IVE, see note 1274287
When I check the OSS note and my managed system I see that my managed system is already on the right required level for SAP Solution Tools Plug-In which is: ST-PI 2008_1_700.
I did check also for service packs but these do not yet exist.
Can someone help me with this issue?
Next list shows current version of the managed systems:
SAP ECC 6.0
SAP ABA 700 Sp 13
SAP Basis 700 SP13
St-PI 2008_1_700 SP 0
PI-Basis 2005_1_700 SP 13
SAP BW 700 SP 15
SAP AP 700 SP9
ST-A/PI 01l_ECC600 SP 0

I did finally resolve my problem with input from OS which is listed below.
You're using the latest version of ST-PI. There's no patch levels
available to download in this moment. To solve this issue I ask you to
first apply the latest version of this note below. Please, read
carefully step by step this note below and follow all the procedures.
Number 1172948
Short text SAP Solution Manager - Basic functions
After you applied the central note, I ask you to apply these notes belowWhen you had all these notes applied, this issue will be solved.
Number 1274287
Short text End-to-End Diagnostics SP18
Number 1244225
Short text Solution Manager 7.0 EhP 1: recommended
corrections
Please, apply the latest patch level for lmservice too.

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Managed System Configuration

Dear Team,
While doing managed system configuration for AS JAVA system (only used for BI JAVA) we are getting error as "Solman System prerequisite are not met" ST-A/PI 01P_700 is not installed.
When Checked in Solman system ; However the ST-A/PI is higher version than what is asked for. It has version of ST-A/PI 01R_700.
Our solman is at 7.1 SPS 08
Please suggest how to go ahead.
Regards,
King Arthur

Dear Divyanshu,
I have done managed system configuration for ABAP only stack on NW 7.01 ECC and it went successful.
However at that time my ST-A/PI was on lower version than ST-A/PI 01R_700 (i.e. somewhere on P or Q version)
Now I am trying to do for Managed system which is Only JAVA stack....and is based on NW 7.41.

SOLMAN_SETUP Wizard - Error on Managed System Configuration

Hi all,
I've installed SAP Solution Manager 7.0 EHP1 (Stack 19) on linux-oracle.
After I start the configuration with SOLMAN_SETUP tcode.
The "Initial Configuration" and the "Basic Configuration" phases are termined with success.
In the third phase "Managed System Configuration", I try to connect itself on client 001 but when I try to generate the RFC Connection I received an error message on wizard when the system create the "Back RFC Destination". If I check this RFC on SM59 tcode it works!!!! I don't understand why I received the error message during the wizard.
Then on "Check Prerequisites" I execute the "Diagnostic Prerequisites" phase and I received 2 error messages:
a) The Introscope Enterprise Manager configuration cannot be loaded. Details:
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration. at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251) at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415) at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461) at com.sap.sup.admin.wily.jdbc.EMOverview.getAllEMgrs(EMOverview.java:220) at com.sap.sup.admin.selfcheck.checks.wily.em.EmJdbcCheck.process(EmJdbcCheck.java:32) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:165) at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:781) at java.lang.Thread.run(Thread.java:770)
b) The RFC Read Destination is not available for connection to Satellite System (RC=2). Details:
Please check SAP Note 1106900
I find The RFC Read Destination on SM59 tcode and it works if I try to "Connection Test".
Could you please help me to check the two errors??
Thanks in advanced
Moreno

Some more info when I tried to run the setup wizard again.
Step Wilyhost Agent Details
Setup Exception: Empty or no Wily EM host retrieved from secured global config! Going on with "localhost".
Setup Exception: No Wily EM port was passed by SetupWizard! Going on with port 6001 instead.
Created destination XXX|hostname_xxx_01
Created action xxx -XXX AbapSystem
Created action xxx|hostname_xxx_01 - XXX|hostname_xxx_01 AbapInstance
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exceptions
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:251)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:415)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:461)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:269)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:440)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:87)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:110)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:416)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:328)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:545)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:1680)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:35)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:1950)
at java.lang.Thread.run(Thread.java:571)
hostname is the hostname of the system, i removed it.
xxx is the solution manager sid.

SQL Error 0 during DBACockpit setup in Managed System Configuration

Hi All,
I'm getting SQL Error 0 during DBA Cockpit setup in Managed system configuration. I'm trying to connect MsSQL 2005 from Linux system(Solution Manager 7.1 SP10). I have installed necessary ODBC and microsoft drivers. Any suggestions will be appreciated.
Regards,
Pragadees

If I've understood you correctly, you are trying to setup a remote database connection from an SAP Solution Manager system running on Linux with a database which is NOT MSSQL to a database which is MSSQL running on Windows.
In that case have you checked these SAP notes ?
1265134 - DBA Cockpit: Connecting a remote database
1388700 - SolMan 7.0 EHP1 Database Warehouse for MSSQL
Regards
RB

Warnings in Managed System Configuration

Dear all,
We are in the process of connecting a satellite system to Solman 7.1 and to monitor its datas.
So in Managed system configuration for system, we are facing some warnings in step 8 and step 11.
In step 8(Configure Automatically),Generate System level metrics ended with a warning i.e "The Diagnostic Agent for Introscope Enterprise manager could not be found"
In step 11,(Configuration),Configuration check ended with warnings.
i.e Errors found during the last 20 run for extractor
Kindly suggest on how to proceed further.
Thanks,
Regards,
Hasan

Hello Diego,
Sorry for the late reply..
Yea the Enterprise Manager is running.
When i tried the URL which you had given, it is displaying as 404 not found.
Also when i start the Diagnostic agent in the SOLMAN, it is getting started and it is showing green LED in MMC, but when I try to connect the Diagnostic Agent to Solman in Basic configuration step, it is turning yellow and displays as,
""Access denied by the Managing System
Check username/password
Managing System details:
host hllsap12
port 8103
Last operational status 272"
After this the Diagnostic agent turns to yellow in MMC also..
Kindly advice,
Thank You,
Regards,
Hasan

Software Prerequisites in managed system configuration are not fulfilled

Similar Messages

Maybe you are looking for