Software Provider(High Tech Industry) SAP solution!!!

Hi All
I need information (domain knowledge) for Software Provider Industry under HIGH TECH. how they work , what is their business, how SAP useful for them etc etc.
if any of you having anything related to this please share ..its urgent..
regards
Yogesh

I am also searching for same documentation, till now I got this pdf http://www.sap.com/netherlands/industries/hightech/pdf/50055230.pdf
Regards,
Nitin

Similar Messages

Info on SAP Solution manager ..

Hello.
Can anyone provide some links on
SAP Solution manager and
SLO(System Landscape optimization)
thanks in advance
Shiva

Hi,
Some good links:
http://help.sap.com/solutionmanager
http://service.sap.com/rkt-solman
Besides you can also use SDN and in service.sap.com there several quick links as ahelp to you but there you need to choose solution manager. This you can do by some navigation here and there in service.sap.com
regards and do reward people for the help extended.

Industry Solution for High Tech Manufacturing - how to activate?

Hello,
I'm Basis consultant installing ECC 6.0 at a client site. The client company has purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ."
My question is: how is this installed? Is this part of ECC-DIMP, and thus can be activated after installation of ECC. If so, can this be activated and tested in a newly created client copy, or does the activation need to take place prior to a client copy?
If not part of ECC-DIMP, does this purchase refer to Best Practices for High Tech, which does require additional software. In this case I believe I will need to install the Baseline package for BP, then the specific BP for High Tech.
Follow-up question:
1. Could either of these be installed later, or would that break existing new configuration?
Thanks in advance for your help!
Glen

Hi Glen, I just saw your posting from two months back and wondered if you had gotten your answer, and if by saying that the client had purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ", did they mean SAP Best Practices for High Tech?
Please let us know if you have any questions,
Marian

Q4_How to manage software material and BOM in SAP_High-tech Industry PLM Implementation Issues

Hello,
We are implementing SAP PLM for a high-tech company which designs and manufactures mobile phones (ODM). Since we are new in PLM consulting and we are facing with some implementation difficulties, we are looking for some solutions here.
Question 4: How to manage software material and BOM in SAP?
Currently, software are not managed as material in the BOM. How to manage software material in PLM, can anyone help us with some suggestions.
Question 5: PADS integration with PLM.
Currently, customer is using Pro/E and PADS to design their product. SAP has already provided standard interface for Pro/E integration. But for PADS, there is no such interface. Because of the specialization of electrical components managed in PADS, different from structural parts in Pro/E, how to transfer them between PLM system and manage them in the PLM system has become an difficulty. We will appreciate a lot if anyone can share us with some successful solutions.

Hi,
software, typically a released version of software, is typically managed as a normal material master, and a related document with the code as a package (e.g. ZIP), if really needed.
Software in development is managed typically with a dedicated Software Configuration Management tool like Rational ClearCase, Subversion, MKS Integrity, ....
Regards, Ulf

SAP IS-High Tech Activation

Hi,
We have recently implemented ECC 6.0 with EhP 5. While trying to get Is-High tech componenet activated we dont see any option coming up with the same name. Can someone help me to understand how to activate this componenet?

Hi,
SAP Note 1168556 - IS-HT-RN EOL
Hope this helps you.
Thanks,
Sharib

New features in SAP Solution Manager 4.0

Hello Experts,
Can anybody give me a good list of new additional features in SAP Solution Manager 4.0 with description and wt r the business benefits of implementing those features.Plz dont give marketplace pdf links as i hv checked it.any good Word which is self prepared wll be helpful. Useful answers shall be rewarded points. Requested to revert at earliest as i hv to present tat to my seniors here and is urgent. My Email Id is [email protected] .
Regards,
Saumya

Hi,
Solution manager is a SAP component.It's a free software provided by SAP.After 640 release on wards if you want to install any software solman key is mandatery field.
Using solution manager we need to do the fallowing things.
1.solution manager CEN and Alerting configuration guide for dummies.
2.system monitoring configration guide for dummies.
3.service desk configuration guide for dummies.
4.ccms monitoring configuration guide for dummies.
From april onwards we need to down load the support packs through solution manager.In order to do this one we need to configure maintanace optimizer.
i hope it will help you.
kiran kumar.v

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

SAP Solutions StackExchange Q&A Site

At the risk of being labeled a spammer and being excommunicated from SDN, I am posting an appeal here which I posted on the Suggestions forum - you could construe this as being Coffee talk anyway :
I have created a proposal on StackExchange for a Q&A site for SAP solutions.
However, the proposal was flagged as a duplicate by the submitters of another proposal for Enterprise. The submitters of that proposal, however, lump together SAP with ERP, CRM, HR etc, as if SAP were merely another category of enterprise software, clearly demonstrating a lack of knowledge about what SAP is.
If you support the idea of a StackExchange Q&A site for SAP Solutions, please follow the proposal and add your comments at the following URL: http://area51.stackexchange.com/proposals/31043/sap-solutions
Also, please raise your voice in this discussion as well: http://discuss.area51.stackexchange.com/questions/1460/q-a-on-sap-warrants-a-site-on-its-own

Hi Martin, that's a great idea; I've often wished this already existed as I'm a fan of the StackExchange communities myself. I see I'm too late for your proposal as it's been closed, but a newer one is still open and needs support. Since your question is still showing up quite high on a Google search I thought it was worth posting a reply to your old question pointing people to the newer request:
http://area51.stackexchange.com/proposals/41621/sap-systems-applications-and-products

What is Ale, Edi,IDoc tech for sap

Hi all,
What is Ale, Edi,IDoc tech for sap?
Thanks.

hi deniz,
ALE
ALE
Triggering OB via Change Pointers:
 When an application make a changes in any object an entry is made in CDHDR and CDPOS tables. When any change is made the SMD(Shared Master Data) Tool checks that ALE setting and create a change pointer in the BDCP table that will point to CDHDR table. A standard program RBDMIDOC is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process to distribute to the appropriate destinations. The program will read the table TBDME to determine the IDoc selection program it is MASTERIDOC_CREATE_SMD_MATMAS in the case of MATMAS.
Outbound Process:
When the stand-alone program or the Transaction(BD10) is run, it calls the Idoc
Selection program MASTERIDOC_CREATE_REQ_MATCOR in the case of MATMAS, which is hard coded in the program. The Idoc Selection program reads the master data and create a master Idoc and stores it in the memory. The function module then calls ALE layer by using another function module MASTER_IDOC_DISTRIBUTE which is invoked inside it. Then Idoc filtering, Segment filtering etc.. are done in the ALE layer.
 To dispatch the Idoc to the destination system, the system reads the partner profile to determine the destination system. Then the sending system calls the function module INBOUND_IDOC_PROCESS asynchronously on the remote system and passes the Idoc via memory buffer.
Asynchronous Communication:
The data that is IDocs and the function module are stored in ARFCDATA and ARFCSSTATE tables. The function module ARFC_DEST_SHIP will transports data to target System and the program ARFC_EXCUTE will execute the stored function Module. If communication problem occurs RSARFCSE program is automatically scheduled., if successful, entries in the tables ARFCSSTATE and ARFCDATA will be deleted.
Inbound Process:
The INBOUND_IDOC_PROCESS program is triggered as a result of RFC from the Sending System, the Idoc to be sent is passed as parameter for the function module
In the partner profile if Process immediately is selected then RBDAPP01 program is executed. It will read the process code(MATM) from the Partner profile, which in turn invoke the function module IDOC_INPUT_MATMAS for MATMAS
 Function module will call the corresponding SAP transaction using call transaction or uses direct programs to convert the Idoc to Application document .
In the table TBD51 there will be entries to find which option is used.
Transactions:
SALE - IMG ALE Configuration root
 WE20 - Manually maintain partner profiles
 BD64 - Maintain customer distribution model
 BD71 - Distribute customer distribution model
 SM59 - Create RFC Destinations
 BDM5 - Consistency check (Transaction scenarios)
 BD82 Generate Partner Profiles
 BD61 Activate Change Pointers - Globally
 BD50 Activate Change Pointer for Msg Type
 BD52 Activate change pointer per change.doc object
 BD59 Allocation object type -> IDOC type
 BD56 Maintain IDOC Segment Filters
 BD53 Reduction of Message Types
 BD21 Select Change Pointer
 BD87 Status Monitor for ALE Messages
 SALE Display ALE Customizing WEDI - ALE IDoc Administration
 WE60 - IDoc documentation
 SARA - IDoc archiving (Object type IDOC)
 WE47 - IDoc status maintenance
 WE07 - IDoc statistics
BALE - ALE Distribution Administration
 WE05 - IDoc overview
 BD87 - Inbound IDoc reprocessing
 BD88 - Outbound IDoc reprocessing
 BDM2 - IDoc Trace
 BDM7 - IDoc Audit Analysis
 BD21 - Create IDocs from change pointers
 SM58 - Schedule RFC Failures
EDI
EDI(Electronic Data Interchange )
RFC DESTINATION:
 A logical name used to identify the remote system on which a function needs to be executed.
Partner Profile:
 It defines the characteristics of data being exchanged with the business partner.
Partner Function:
 Role of the partner Eg:Ship-to-party,bill-to-party,etc in EDI and in ALE legacy system or remote SAP system.
Partner type:
 The type of your business partner .
 EDI KU/LI
 ALE -- LS.
Archiving:
 -Need to archive the important transmitted document
-Created in SARA
 -Assigned in WE20.
PartnerProfile Tips:
 RSECHK07- Consistency check for Partner Profile.
 If you want to modify partner profile; copy it and then modify. If you cant modify it , u have to delete it.
 To move partner profile to production system choose Partner -> Transport
Port defintion:
 It defines the medium through which data is exchanged between systems.
 tRFC - Used by ALE
 FILe - Used by EDI
 R/2 system system port For R/2 system
 Internet port - to connect with internet applications
 It also depends on the receiving side. If the receiving subsystem accepts tRFC, EDI also can use tRFC.
Remote Function modules required by Subsystem to send status and inbound idoc to SAP:
Startrfc - Program to execute RFC enabled Fun.mod. in SAP
EDI_DATA_INCOMING - To send data as inbound
EDI_STATUS_INCOMING - To send status to SAP
RSPARAM - To know the gateway service of the SAP system.
Message Control:
 Output controller
 A service program for determining the output type
 To generate and manage various outputs from an application and control their medium and timing of exchange.
 To retransmit the document without duplicating it
Procedure:
 A procedure defines a set of possible outputs for an application
 There may be more than one procedure but only one can be active
 Requirement field in procedure specifies the condition which the sales docu. should reach,for sending the sales order response.
Output type:
Defines the characteristics and attributes of the output.
Access Sequence :
Defines a sequence in which the business rules are checked using condition record of the condition table for proposing output type.
Sapfans Q & A
SREL_GET_NEXT_RELATIONS -
Function Module that will provide me the number of the document that was created by an IDoc
RLSUB020
Program which uses the above function module.
Upgradation problem
When the old version program is upgraded in to newer version(4.0b  4.6c) the SE38 editor wont allow u get thru the programs normally to get rid of this.
Solution:
EDIT > MODIFICATION OPERATIONS > SWITCH OFF ASSISTANT. Hit Enter on the subsequently shown Warnings window. You should now be able to maintain the code as before.
When transporting the dialog program sometimes the links may be missing in the testing and production area. To overcome just check u have properly save your all includes and other stuff in the same request if not, do so. Other options In ver 4.6c -> Within ABAP editor try utilities/Update navigation index
this fixes the links
ALE( Application Link Enabling )
Disk Mirroring:
Changes occurring in the database should reflected to another disk that maintains a mirror image of the main disks contents.
Replicas:
Maintaining redundant data across multiple systems.
ALE:
It provides distributed environment to integrate non-SAP systems
Provides guaranteed delivery of data regardless of network problem to application.
Logical system :
 The systems involved in distributed environment are assigned a logical name which uniquely identifies a system in a distributed environment.
Data Mapping:
 Conversion of a business document in IDoc format to an EDI format (and vice versa) which is performed in the subsystem.
Message Types:
 Represents a business function
 Technical structure is the IDoc type
 Or can say an instance of IDoc.
IDoc :
 They are containers used to exchange data between any two process.
 It represents an IDoc type and IDoc data
 IDoc type is structure and IDoc data is an instance of it.
Pls reward if helpful.

SAP Solution failing

We heard that [SAP solutions are excellent (in fact best) for manufacturing industry |http://www.infoverto.com/2010/05/manufacturing-erp-software-options.html]and these views were echoed by out internal leaders but now when we were evaluating the SAP solution generally against some of our niche requirements - we are a furniture manufacturig company - we found that there are a lot of gaps found in standard solution offered by SAP. Now, some of the consultants that we hired, are suggesting to go for consona or sage instead for furniture manufacturing. Since this forum has excellent SAP experts, we need to know whether it is a good idea of going with SAP or not. Sorry, I can not share the niche requirements in this forum as they are our USP.

Hi,
I hope this path will helpfull to you.
http://www.sap.com/search/index.epx?q1=solution%20manager%20Installation%20steps
regards,
reddy

Virtualization for SAP solutions

Hi all,
as i recently wrote a blog about 'Virtualization and enterprise SOA' and as we will have many virtualization related activities in 2007 i think it's a good idea to start a thread in this forum for general discussion about virtualization and its utilization in SAP landscapes.
As many of you know SAP is offering application virtualization capabilities in SAP NetWeaver with Adaptive Computing. This was introduced in at SAPPHIRE 2004.
Meanwhile virtualization concepts, technologies and products cover a much broader part of an SAP landscape, starting at network virtualization and going up to desktop virtualization. I am sure storage virtualization with SAN or NAS is almost a standard IT scenario, but some of the newer virtualization technologies are in their early stages first.
How are you using virtualization technologies today, and which concepts/products/... do you consider to be most important for your environment ?
Best regards
Roland

Hi Kwee,
my name is Nils and I am topic owner of the virtualization topic within SAP Consulting. You ask:
1. How will SAP system maintenance and administration be affected now that we have tools in VM that can hanlde copying, backup and recovery?
Generally spoken, SAP should react on this when it comes to cloning instances. Change of an SID still is not supported, so I would expect the SAP Virtualization Lab to provide a solution for this demand asap.
In the VMware context, our Consulting team developped an approach that lets you run SAPINST in a silent mode so that no user interaction is needed any more for installing application servers, central instances and so on. You create a master template for sapinst, and this template can then be modified script-based to deploy your dialog instances in background. Siemens implemented our solution as well as MAN Diesel in Kopenhagen
If you have customers who deal with this topic, ask them to order me for an implementation. Backup and recovery should still be performed on database or storage level (Netapp). If you ask the question more precisely, I will give you a more detailed answer.
2. What about SAP high availability and disaster recovery scenarios? How useful is clustering now that we have tools in VM that can offer an alternative solution?
Clustering still remains one of the operational keys. VMWare can never fully replace a Cluster although the fancy VMWare slides would like to make us thinking so. When it comes to disaster recovery, VMWare HA is a very fancy solution. But not every customer has the infrastructure and the money to implement VMWare HA. Also from a performance point of view, Clustering still stays a valid approach. Or did you ever try a HA-setup for a 8 TB solution with VMWare? A valid alternative for Clustering can be Adaptive Computing which gives you an enhanced availability (no high availability) bit downtimes of customer sometimes allow this and it is more stable than most cluster solutions around. You should also keep your eyes on Windows Server 2008! I spoke to Microsoft this week, and they put live-migration of virtual machines on their hot topic list again (after it was removed). Beginning of 2009, Windows Server will be able to migrate virtual machines in a live manner and also provide HA functionality for virtual machines. VMWare is still a little bit ahead of MS, but I saw the newest tools from MS, and this advantage is shrinking.
3. How will hardware sizing be handled for SAP upgrades and rollout of new functions in a VM architecture?
From a sizing perspecive, calculate an overhead of 20% for your hardware to be on the safe side. Sizing is a task to be done by the customer together with the hardware vendor. He needs to tell the vendor that he wants to operate SAP in a virtualized environment. The hard limit for this is the IO based on your approach how to host the virtual systems (VMFS based with central FC storage or container- based). The hard limit is 6000 SAPs at the moment, for larger implementations, a lot of money has to be spent, technically, more then 18.000 SAPs are possible (but do not make sense).
4. How can performance be optimized in a VM environment?
SAP-Performance? IO-Performance? There are some guidelines when it comes to the setup of virtual machines with SAP. You can find them here:
http://www.vmware.com/partners/alliances/technology/sap-whitepapers.html
Best Practice Guidelines for SAP Solutions on VMware® Infrastructure
Is there a SAP training that specifically deals with such topics?
No, but if you can take care on an IO, I could come over and teach you and your collegues about those topics. I developped a workshop I present to customers (one-day) about all of those topics mentioned here.
Best regards,
Nils, Technical Solution Architect, SAP Consulting

StackExchange site for SAP Solutions

I have created a proposal on StackExchange for a Q&A site for SAP solutions.
However, the proposal was flagged as a duplicate of another proposal for Enterprise. The submitters of that proposal, however, lump together SAP with ERP, CRM, HR etc., clearly demonstrating a lack of what SAP is. (As if SAP were a category of software like CRM, HR etc.).
If you support the idea of a StackExchange Q&A site for SAP Solutions, please follow the proposal and add your comments at the following URL: http://area51.stackexchange.com/proposals/31043/sap-solutions

Hi Martin, that's a great idea; I've often wished this already existed as I'm a fan of the StackExchange communities myself. I see I'm too late for your proposal as it's been closed, but a newer one is still open and needs support. Since your question is still showing up quite high on a Google search I thought it was worth posting a reply to your old question pointing people to the newer request:
http://area51.stackexchange.com/proposals/41621/sap-systems-applications-and-products

Forum for IS-High Tech

where can i find a forum with topics related to IS-High Tech.

Hi Yara,
We don't have moderators or critical mass yet for to have forums for all industry solutions.
Please post your question in the brand new General Industry Solutions forum: Industries
Once there are enough questions for an IS-High Tech forum we will create one and move the posts over.
All the best, Mark.

High Tech for CRM

Hi All,
We have a scenario where the client has an already existing CRM 4.0 system up and running on which he now requires IS-High Tech.
My query is:
1. whether High Tech can be provided as an Add On on the already existing CRM syetem or does this have to be a fresh installation.
2. Also Client has an R/3 system with IS-High Tech on it. Is the High Tech for R/3 the same as Hight Tech for CRM and can the same Installables be used?
Please get back to me as soon as possible.
Thanks in advance
Ipsita Guin

Hi Sat,
the link in your reply suggests the way we can develop generic extractors based on function module. That approach works well with standard SAP (ie R/3) but IS High Tech being a CRM based system, the process of creating generic extrators is a bit different.
Thanks for your reply.
Regards
Anuj

Excellent material for SAP TAO with SAP Solution Manager

Dear All,
I found SAP TAO material and slides and it is superb for SAP TAO learners, Please go through this link [http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/00e9a828-ad24-2d10-3183-9eec5f5b1c4e|http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/00e9a828-ad24-2d10-3183-9eec5f5b1c4e]
Regards,
Dasaratha

hi i was looking for carrier in sap testing..can you provide me some information about the difference between sap solution manager and sap testing
and i would like to know list of topics that cover SAP testing and software's used for the course.... and i want to know if anyone can provide training on it as you are sap tester...i was looking for institutes on sap testing in Hyderabad..i hardly find any ....
i hope you get me back as soon as possible

Software Provider(High Tech Industry) SAP solution!!!

Similar Messages

Maybe you are looking for