Software udate

how long does it take for 2006-06-28 to udate on the nano??? how do i know which USB(1.0 or 2.0) is installed on my sys????
my nano is taking over two hours now for updating!

Hello,
Disconnect your iPod from the computer. Try resetting your iPod, then putting it into disk mode (follow the instructions in that article).
Plug it back in, see if the Updater works, then try formatting it from "Control Panel":
Go to:
"Start>>Control Panel>>Administrative Tools>>Computer Management>>Disk Management".
Find your iPod's listing (typically "E:" or "F:")
Right-click it, go to "Format", and start the formatting in "FAT32".
I hope this helps.
~~Kylene

Similar Messages

  • HT1414 There is no option in General to download software udates?

    I need to update my software to ios 5.1 but there isn't an option in general to update.
    I have tried logging on via my PC but can't seem to find a way to download
    Please can you help.

    If iTunes is not giving you the choice to update to iOS 5 it could be because your phone is not a 3GS but a 3G.  IPhone 3G cannot be updated any higher than iOS 4.2.1

  • I'm losing my downloads in software udater!!

    I have been trying to download the new Mac OSX udate (10.4.8) which is 147mb, and it keeps getting to 100 and then disconecting/erroring and then when i try again its back to 0 percent, i have to start all over!!
    I'm only on a normal dial up connection that runs slower then normal it runs at 2.0kb. At this speed it takes over 24hrs to get to 100mb!!
    I'm wondering if there is a way to resume the download or if there is some sort of download manager that i can get so i dont have to start all over again? Or if there is any other way to get the download?
    It only happens with the Mac OSX updates cause they are so big!!
    I live 30km out of the nearest town and 100km from my local apple center.
    Broad band is not an option because the phone line is old and not getting updated.
    Could someone please help me as i cant update my computer and really need to.
    Any help would be gretly appreciated!

    I have Download Wizzard. It has a free version with less bells & whistles. Will pick up a download where it left off. It is PPC, so to use it you need to set up a version of your browser to run using Rosetta. Then you could get the Delta or Combo versions of OS X updates from the Apple Downloads page.
    Or...
    Can you make a friend with your Apple Center? Maybe they could burn you a CD/DVD of OS X Updates and mail it for a small/reasonable fee.

  • N97 mini software udate

    Hi
    I have discovered my N97 mini currently has software version 11.2.102 (meant to be 12.0.110) when i go to SW update it says there are no update available so I downloaded the software updater from the nokia site and it doesnt recognise my phone.
    Any ideas on what to do?

    There are various reasons why the update may not yet be available for your phone. Nokia releases the update in phases and the one for your product code may not be released yet. Furthermore, if your phone is network branded, it may be even longer or not at all becuse the network has to localise and approve the firmware update before Nokia will release it. Some networks are notorioously slow at doing this if they bother at all. I have a network branded handset and the update was finally released a month ago after me persistantly pestering my network for weeks. 
    So if you have a network branded handset, you should ring them and request that they approve it asap.
    As for the updating process, the best way to do it is to use fota which is to update directly from the phone. To do this, type *#0000# then the green call button. Then click on Options followed by check for updates. This should tell you when an update is available and give you the option to update directly from your phone. You will need an internet connection for this. Don't forget to backup your phone first.

  • Software update hangs

    I have a 21.5 inch Intel iMac mid 2011 and all has been working perfectly since November 2011 when I bought it.
    The problem I am having is that when using the software update application found under the appleysumbol on the upper bar, the application says 'checking for new software' and hangs/freezes at what I would call around 20%. I have left the application running for several hours and the bar hasn't moved an inch.
    I have tried using both Wi-Fi and ethernet connections to run the software update and neither have helped.
    I have also tried several options I have found on some apple forums, including deleting software update caches and using 'Onyx' to delete software update cache and download cache.
    As well as this I downloaded an installed the OS X Update Combo 10.7.3 and reset my system, along with verifying and repairing disk permissions. None of this helped.
    Could anyone please advise on some way to sort this out as I don't particularly want to install all future updates manually
    Thanks

    Hi,
    27" Intel Mac Running Lion with 8GB Ram.
    Having same kind of problems after dowloading 10.7.3
    Update would see the download for IPhoto 9.2.2 and then would try to get it, but when the progress bar came up nothing would happen. After a while a message came up saying unable to connect to Server, decided to manually download and Install, had to do do the same for Aperture 3.2.3, Safari 5.1.4 and the Digital Camera RAW Compatability Update 3.10.
    Now the System is up to date when I try Software udate again it hangs around for ages until it tells me my Software is up to Date.
    Have read an Article on the Net that in Mountain Lion you will have to download Software updates from the App store so Everything is one place, just wondering if these Problems we are having is the Precursor to that being implemented.
    Regards.

  • How can I delete old Apple Software Updates from 10.6 server?

    Hi guys!!
    First of all, please, excuse my english......i know it's the worst possible and will try to develop it.
    My question is the following.
    The hard disk of my xServe is almost full and I need to delete the old Apple Software Udates that it contains (some of them are from 2005!!)
    And I don´t know how to make it!!
    I`ve uncheck the "automatically enable copied updates" option in Server Admin and I´ve check-in the "Purge unused/legacy software", but i don´t know how to delete the oldest Apple Software Updates because I don´t know where the **** are they!!
    Thank's in advance from Spain.
    Any help will be very wellcome
    J.

    You could try what
    s in <http://discussions.apple.com/message.jspa?messageID=9289958#9289958>, or, as this is a new setup which isn't in use, you could just nuke the system and reinstall and this time use the correct DNS name.

  • HELP... after Mountain Lion and iPhoto software update. My library was updating and then corrupted

    Smooth update to ML and then ran software udate. It suggested I update iPhoto. I did that and then restarted computer and then tried to open iPhoto. It told me that it would update my library and not be able to go back to an earlier version. I clicked okay. Part way through an error window came up saying that my library was corrupted and that I need to go to a back up.  I have most on a back up, but not all. Can I trouble shoot this library or open the package and remove the most recent photos I need to my older back up?
    Please advise - I really like the ML until this happened.

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Has anyone had issues with Microsoft Word or Excel requiring initial set-up again after a software update?

    Has anyone had issues with Microsoft Word or Excel requiring a set-up after software udates?  I do not have product key, so unable to set up again.

    This laptop has original Microsoft word &amp; excel provided by Mac when purchased and is legal copy.
    Do I understand you bought a Mac and it came with Microsoft Office?    I could be wrong, but I wasn't aware that was an option.  Or am I not parsing that sentence correctly and you bought a Mac and bought a legal copy of Office to install on it?  In which case, never mind.

  • IOS5 software "corrupted" during download

    As it says, for the 2nd time (wasting 1.5gb of my 3gb monthly download ) I get the message "The software for the iPhone was corrupted during download" - error 1403
    I'm using my iphone4 as my personal hotspot, running Norton 360, windows7 64bit. Before I completly lose it, what might be some glaringly obvious issues?
    The previous software udate 4.3.5 was fine using Vista on my old computer

    Try disabling your firewall; both on your PC and the external Firewall/Router.

  • Software update my phone has gone into recovery mode and I cannot use it after doing the latest software update ???

    I have just done the latest software udate ios7.1. the phone is showing the itunes logo and the connection lead. I plugged it into the pc and a message comes up saying this iphone is in recovery mode and must be restored before it can connect to itunes, but i cant get into the phone as the screen wont do anything. I clicked on the pc to restore the phone but nothing has happened. The phone is an Iphone5c
    Please help thanks Teresa

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • HT4623 my phone does not have the software update option on it, how do I update my phone without this?

    My phone is saying that I need the iOS 4.3 update but I do not have the software udate option available to me on my phone.  How do I still update my phone?

    If you have an iPhone 3G then iOS 4.2.1 is as high as it goes...

  • HT4623 what if iphone does not have the software update category

    how do i update the iphone 3g without usinng itunes but it has no software udate to choose.

    Are you sure you're connected to a network and that your iphone isn't on airplane mode?

  • Panda Cam not working in 10.3.9

    I've been addicted to the San Diego Zoo's Panda Cam the last few weeks (http://www.sandiegozoo.org/zoo/expandastation.html) at home and at work.
    It works fine in 10.4.x with Safari (home G4 tower setup). It worked fine in 10.3.8 with Safari (work PowerBook setup). But after updating to 10.3.9 and all of the other Software Update installations, my PowerBook will no longer show the Cam in Safari. I get one picture, but neither the time nor scene updates.
    I have no problem with IE on the same PowerBook. I've reinstalled Flash and Shockwave. I've reinstalled Combo 10.3.9 updater, Java Update, Security Update. I even tried to downgrade back to 1.2 Safari. No luck. I've run Diskwarrior. And when I run Safari with my 10.3.8-loaded iPod, the cam works again.
    Anyone have this problem and/or have a solution? I'd rather not downgrade to 10.3.8 (just a hassle) or upgrade to 10.4.x (office machine, need to buy Tiger). Thanks for any info.

    I did find that article when researching the problem, but my profiler already says the SMS is active so it should be working. I wonder if disabling it, then re-enabling it would do anything.
    Can't help but wonder if the motherboard replacement has anything to do with this. Or if another odd thing is related. AppleCare insisted, so I did an archive and install when trying to solve my NAP (Narcoleptic Aluminum Powerbook) and soon found my Software Udate wouldn't work from the Finder menu selection (I am able to get the update to run from the System Preferences panel).
    Don't know if that helps, but, any ideas?

  • CAUTION! SourceForge, Linux Foundation printer drivers on MacBook Pro Retina

    I have installed Gutenprint, USBTB, and HPIJS on my brand new MacBook Pro Retina in an attempt to get it to function with my HP Officejet K80 printer, to no avail.....and now they will not uninstall. To make matters worse, the uninstaller for all of these drivers actually installs another complete set of duplicate drivers on the computer. I now have 6 independent sets of HPIJS drivers on the computer. Further research has revealed that none of these third party drivers are likely to produce any success on OS X 10.8.4 anyway. After installing these drivers and attempting all of the various combinations including adding a usb to parallel adapter (K80 has both usb and parallel ports) with no success, I decided to purchase a new printer (HP Officejet Pro 8600 Plus). I now want these drivers off of the computer! All attempts to run the uninstall routines that downloaded with the original drivers have simply installed a duplicate set of drivers (with a .1, .2, .3 etc. extension).
    These drivers came from SourceForge.net and The Linux Foundation. I now question whether they are even valid drivers or some sort of bogus software.

    UDATE:
    I sent a detailed email to SourceForge.net at sfnet_ops as indicated for help on the sourceforge website. They sent a return email that they are only the hosting provider but redirected me to the exact project on sourceforge for help:  http://sourceforge.net/projects/hplip/support.
    Unfortunately, this project does not indicate anyway to get help....as stated on that web page "Unfortunately, this project hasn't indicated the best way to get help."
    I have also found now that a previous unrelated and installed download is now seems to be missing from my computer though I can not specifically state that it is due to my attempts to use the HPIJS uninstaller.
    Is there another way to uninstall these drivers that now amount to junk (and possibly malicious) software?
    Does anyone have any suggestions?
    Does Mac have any general uninstallers that will work?

  • Safari 2.0.4?

    I am running Safari 2.0.3 on OS X 10.4.4 and for the past few days many pages, including Ebay, will not load, but tell me to update my browser. Is there a newer version of Safari thta my software udate is not catching?
    R

    Same here Robert... When I first go to ebay.co.uk or ebay.com, the pages load ok then after a couple of page loads I start to get text/html code.
    As I said in my previous post, Apple has changed the way non-standard html pages are viewed...
    See http://docs.info.apple.com/article.html?artnum=302810 (scroll half way down)
    "Safari now displays certain documents that have text/plain headers as plain text rather than treating them as HTML."
    So I think we are going to need an update/fix for this.
    It might be something to do with Safaris MIME type i.e. non-standard html thinking it's text or it could be a region specific problem too (as we are both in the UK)
    Does anyone else have this problem?
    Partial page dump of text/html code from ebay...
    1:31:10 GMT;Path=/
    Cache-Control: private
    Pragma: no-cache
    Content-Language: en
    Age: 354
    Transfer-Encoding: chunked
    Via: HTTP/1.1 ntl-site (Traffic-Server/5.2.4-59306 [c sSf ])
    2e8
    <html>
    G4   Mac OS X (10.4)  

Maybe you are looking for