Software update 1.2 Issues

Hi, wondering if anyone else is haviing this problem (as it is a PAIN)
recently updated to iTunes 7 and iPod software version 1.2 and everytime I now connect either of my iPods (Video or Mini) it keeps giving me an error message that "the iPod xxx cannot be updated as files are in use", even though it has already been updated. Went through the 5R's.. still having the same issue ... is this just a glitch with 1.2?

FOrmat ur iPod on My Computer..
right click the removable disk that is your iPod...
wait....
then select FORMAT
after completing the format, a message will appear that it is formatted..(DONT CLICK OK ON THAT MESSAGE FIRST)
then open the iPod software Updater 2006-6-28...
and the time you open it, the RESTORE button should be available..
RESTORE IT...
SYNC YOUR FILES...USING iTunes 7
and NEVER UPDATE YOUR iPod TO 1.2
it'll cause headaches.
ive updated mine w/ 1.2 and suffering now...
it has problems with syncing like,
iPod update is complete,,,,but
OK to disconnect message will not appear....
i didnt changed my settings ever since i bought it...
it automatically syncs and OK to disconnect message appears...
BUT NOW! when i updated it to 1.2,,the ok to disconnect message wont appear!
NEVER UPDATE IT TO 1.2!

Similar Messages

After Software Update, USB Power Issues and Cursor Freezing

I have a 1.8 dual g5. After the latest software update I experienced some seriously quirky usb power fluctuations, a card reader frying and sudden, but temporary, mouse cursor freezing. I did some research and went for a clean install from original Leopard disc and downloaded the combo update 10.5.2 from apple support. I then restarted in "safe mode" and ran the 10.5.2 update, restarted, zapped the pram, restarted to disc warrior to repair permissions and clean the drive... then restarted again. Same deal: Spinning lines on gray 1-2 minute. black (sometimes white) screen 3-5 minutes. blue screen 1-2 minutes. log in.
Tried cocktail, disc utility permission repair and removing log-in applications/drivers. Same deal... ****** computing. I feel like it's 1999 all over again.
Cost me three full days work so far under a very tight deadline and a lot of stress..... Apple is 100% responsible for this messy release and needs to address it quickly.

My problem is similar to the others already posted, but quite different too. Perhaps someone else has had this strange issue occur. I attach my nike+ receiver and set my workout as usual, and then I come to selecting playlists. I select my playlist (which is titled running) and my work out starts. HOWEVER, the playlist that I selected plays music from another playlist such as sarah mclachlan (which is not in my running playlist). I have tried everything that you guys already posted short of doing a restore. Any thoughts? I posted this same question on the nikeplus.com web forum but no one has replied. I can find no sequence to the playlist malfunction. For example say I choose to play my sarah mclachlan playlist it will play my irish playlist instead and so forth. Make sense? HELP!!!!!

IPhone 4 software update and Video issues.

I have the most current software update done on my iPhone 4. Since I have done this I have come to realize that all of the videos that I have taken since the update will show a blank screen when I try to send them in any form email, text, facebook. What can I do to solve this issue? Anyone?

READ the instructions in the link from which you posted.
It clearly states how to upgrade directly from the device (if running iOS5 or higher) or how to upgrade from iTunes on the computer if running iOS 4.
Also, update iTunes on your computer, iOS6 requires iTunes version 10.6 or higher.

Apple Software Update Blank List Issue

Hello,
I am experiencing a wide-spread issue with apple software update on windows. In an attempt to update itunes and quicktime, apple software update is run but comes up with a blank list (see figure 1). This has happened on 3 machines that were freshly imaged (with an older version of itunes), and 5 machines that have been in use for months/years. Operating systems include windows vista, 7 and 8 Release Preview; they all have varying internal specifications.Some computers are x32 others are x64. I have also had a friend who is outside of the network system the other mentioned computers are in, in an attempt to use software update. He came across the same results. Also as a note, the current versions of itunes that are being targeted to be updated range from 10.5 to 10.6.1.7.
I have attempted running a repair on apple software update on one machine, with no change.
Has anyone else experience this issue? I see one other similar discussion post at the moment found here: https://discussions.apple.com/message/18688827#18688827
But no where else am I seeing mention of issues of this sort.
Thanks for any input!
-Rob

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

Software Updates Compliance Report issue

Hi all,
I came across a weird behavior in built-in reports and I am looking for a fix or explanation.
I am trying to use "Software Updates - A Compliance" category -> "Compliance 4 - Updates by vendor month year" report, but when I choose the desired collection (All Servers) and keep the rest as "All values" (as I want to
list everything), report shows only 12 pages of results. By this I can't see all as the report is truncated. If I specify year, I get results which are not listed in "All values". I can get the list of updates by selecting each year separately and
export them, but...
Can someone explain why the report shows incomplete results and only 12 pages?
Thanks in advance!
Arnie

I looked at the SQL Query what is been used in the SSRS Report .seems like the name all values misleading here.
as per the declaration of these input variables,the all values means ,Null or empty.
If at all,you need to get all KB information from very long date as you mean ,get all the values,then you should really modify the query.
SQL is mainly doing the filter based on the following (apart from joins):
(@FromDate is null or ci.DateRevised>=@FromDate and ci.DateRevised<@ToDate)
and (@VendorID=0 or @VendorID=ven.CategoryInstanceID)
and (@ClassID=0 or @ClassID=cls.CategoryInstanceID)
and (@ProductID=0 or @ProductID=prd.CategoryInstanceID)
order by ci.DateRevised desc
for Ex: If you select vendor as 'All Values' ,means nothing, implies vendor is blank. You can try selecting the vendor as All Values and you get the KB information for only with vendor as Null.
declare @VendorID int = case when @Vendor='' then 0 else (select CategoryInstanceID from v_CategoryInfo where CategoryTypeName='Company' and CategoryInstanceName IN (@Vendor)) end
from the above vendor select statement, you must supply some value to it either Microsoft,adobe or local publisher else ,the declare statement treat the vendor value as blank .
Next ,Year :
declare @FromDate datetime = case when @Year!='' then convert(datetime, @Year+'-'+case when @MonthNumber!='' then @MonthNumber else '01' end+'-01', 20) end
for year and month,you should select the value otherwise,you get the information with null values or so.
Same goes for Month ,product ,Update Class.
declare @ToDate datetime = case when @Year!='' then dateadd(month, case when @MonthNumber!='' then 1 else 12 end, @FromDate) end
declare @ProductID int = case when @Product='' then 0 else (select CategoryInstanceID from fn_rbac_CategoryInfo(@lcid, @UserSIDs) where CategoryTypeName='Product' and CategoryInstanceName=@Product) end
declare @ClassID int = case when @UpdateClass='' then 0 else (select CategoryInstanceID from fn_rbac_CategoryInfo(@lcid, @UserSIDs) where CategoryTypeName='UpdateClassification' and CategoryInstanceName=@UpdateClass) end
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

FCP 4.5 HD software update gives licensing issue

Please Help,
I am using FCP 4.5HD and have just done the normal softare updates - now when i try to start the app i get a licensing dialogue box - it shows my correct name and serial number but wont let me press OK and only the quit button is pressable.
(have already tried the sudo option in terminal as suggested in some other similar posts but does not change anything)

Simon, I have been having the same problem when i try to export using the compressor. It tells me I need a AGP Graphics card... the same problem that arose when i first installed FCP4.5 on my new computer with Tiger OS. I got around that by rescripting the infoplist to read 'PCI' rather than 'AGP' on startup. It seems I have to find a way around the compressor looking for the the older AGP graphics card. Any ideas?

HT1476 Is any one else's iphone 5 now shutting down at 40% after software update

iPhone dying at 40% since software update. As soon as I plug it back it comes back to 40%. It's clearly the software update causing the issue. How can I resolve it

Hello there, richsim68.
The following Knowledge Base article offers up some great steps for troubleshooting the issue you're describing:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

OS X Updates: Software Update vs. Combo Updater

I had many problems after updating to OS 10.4.10, so I took my laptop to the local Apple Store. Interestingly, the Genius there said to USE the update from Software Update and NOT use the COMBO updater as most of use seem to do. His reasoning was, "When you use the combo updater, it erases and changes too many things in your system. If you use the Software Update Option, it will give you just what you need." It seems more people on these forums, recommend the opposite. Ideas?
Thanks.

mattn wrote:
Wildly bad reasoning. There are two different issues here, and your so-called Genius has confused them.
The argument "it changes too many things vs. it will give you just what you need" is arguing between using the DELTA updater and the COMBO updater. It has nothing to do with whether you use Software Update.
The issue there is whether to use Software Updater or to do the download and installation yourself. The latter is preferable, whether you do the delta or the combo. That's because with the latter, you can control what's running and what you're doing at the time of installation. Software Update can be run while you're doing all kinds of other stuff, and that is the usual cause of errors and failures and bad outcomes. If you download and install it yourself, you can do the installation while you are running no other apps (preferably in Safe mode) and get a nice clean installation.
It is possible for users to mess things up by running Software Update in the background, or by manually installing from the Combo while other stuff is running.
For very knowledgeable users, the Combo should be a good approach, maybe overkill, but it should be safe and it has the advantage of filling in additional things that might be amiss. However for more typical users who aren't as into these details (which includes the majority of "civilians" that I know), it is a whole lot easier to run Software Update than to go through a bunch of manual steps any number of which might be executed incorrectly by inexperienced people. That may be why the Genius was discouraging the manual Combo approach, which should work fine for experienced users -- but I would bet that the Genius service centers see more problems caused by users doing things themselves versus allowing the Apple tools (Software Update) figure out what to install. Another set of glitches can result from not installing things in the right order, and some people don't appreciate that certain system and security updates need to be installed in a specific order.
A typical user is my daughter's 15-yr old friend down the street who just got a new MacBook. She would have no idea about Combo Updates, when to do them, Safe Mode or any of that, but she can certainly understand quitting all programs and then hitting the software update button (or quitting all programs when an update pops up and offers itself).
An experienced power user will probably always be fine with the Combo approach, but I'd bet the vast majority of Mac consumers would be better up with Software Update (in fact 99% of them do use Software Update). An anecdotal point on this -- my employer has more than 4000 Macs in use by scientists and engineers working on the space program ... these Macs come from our IT dept pre-configured to run Software Update every Friday morning. I once asked them if they get more service calls on Fridays, they said they almost never get service calls for the Macs, on Fridays or any other days.

Software Update Issue - In dire need of NERD power...

Attempted to download Mavericks on my 2011 iMac (currently running on OS X 10.6.6)
App Store returned the following error:
We could not complete your purchase.
OS X can't be installed on Macintosh HD because Mac OS X version 10.6.8 or later is required.
Choose Software Update from the Apple menu to update Mac OS X.
Not a problem, I thought. I chose Software Update from my Apple menu to update Mac OS X and began downloading Mac OS X Update Combined (10.6.8 v1.1) which maintained a good and consistent rate of 10 MB/sec download speed...
...only to hang abruptly at 655 MB of 1.09 GB
Roughly 30 seconds later I receive the following error:
The update "Mac OS X Update Combined" can't be saved.
Software Update can't connect to the update server.
Make sure you're connected to the Internet, and then try again.
To be clear, I'm familiar with issues regarding and related to TCP/IP protocols, firewalls, open/blocked ports, etc.
I made sure that I was connected to the Internet, and then tried again.
The download progress stays put at 655 MB of 1.09 GB, then returns same error.
At which point I decided it might be a good idea to delete the partially complete download and start over. An Apple Support article directs me to /Library/Updates where the partially complete package parts are temporarily stored and I move them to the Trash.
Every single time I try starting the download over (due to what I suspected might be an connectivity issue that I somehow missed) it always went the same:
Download starts, coasts as 10 MB/sec, hangs at 655 MB of 1.09 GB, and returns the same error.
I thought it was odd that it would always hang at the exact same spot so I checked the /Library/Updates folder while the download was active. The package is downloaded in parts and it would always freeze after completing part10. For testing purposes, I duplicated the part10 file and renamed it as "part11" to see if the installer would recognize the dummy part--AND IT DOES! The download happily chugs past 655 MB and continues to write part12. Obviously, this did not solve my problem because once the download finished it could not compile the parts due to the real part11 being missing. It did, however, at least reveal what the problem was: the server could not retrieve that one specific file, part11.
Sadly, I'm at a loss as to where to go from here. As far as I can tell, it doesn't seem to be a connectivity issue on my end--if anything, Apple servers are the one with the issue--maybe a corrupted file? All I know is that I've pretty much exhausted all the options in my head and this is my last resort: posting on the Apple Support Communities (not that there's anything wrong with posting here, I just don't expect a genius to pop out of nowhere with a solution in hand).
p.s. my apologies for the lengthy post, I was trying to be as thorough as I could in order to alleviate as much back and forth one-line question and answer posts to save everyone some time :b

Yeah, I actually tried going the manual way not too long after my original post and unsurprisingly, the download would go smoothly only to halt at a certain point again. In fact, I tried downloading not only the MacOSXUpdCombo10.6.8 but also MacOSXUpd10.6.8 just to give it a try and that too halted during download.
The most perplexing part is that these download errors exhibited the EXACT same issue of halting at a very specific point. To be doubly sure, I tried downloading multiple copies of the same file at different times with some overlap during the download times (basically started two downloads of the same copy a few mins apart and I got these results.
try#3 - MacOSXUpdCombo10.6.8 - stuck at 232 MB of 1.01 GB (kept open in Download window for reference)
try#3 - MacOSXUpd10.6.8 - stuck at 430 of 454 MB (kept open in Downloads window for reference)
try#4 - MacOSXUpdCombo10.6.8 - stuck at 232 MB of 1.01 GB
try#4 - MacOSXUpd10.6.8 - stuck at 430 of 454 MB
try#5 - MacOSXUpdCombo10.6.8 - currently chugging at 61.9 of 1.10 GB, but i'm pretty sure when it's going to stop...
Come to think of it, whenever I tried to update games like "League of Legends", or download/update a Steam game I always get stuck at 33% or 99% respectively. Most recently, I bought "FFXIV:ARR" as a digital download and I haven't been able to get past a very specific point in progression for the game client download as well. So in contrary to my first assessment, it most likely IS a problem on my own end but these "symptoms" seem very clear and specific, I just can't pinpoint the problem. I don't have "connection time-out" problems when doing downloads on my work network, only at the guest house where they assign me a TCP/IP configuration for internet connectivity (which also severely hampers my ability to troubleshoot). On the other hand, P2P is just fine but I suspect that's because it doesn't require a contiguous download.
TL;DR
Large downloads/updates over one specific network (assigned TCP/IP) always hang at specific point in download completion. Internet connectivity for browsing is fine, P2P downloads are fine.

Software update issues - made more problems for me

My Q10 just downloaded a new Software release 10.1.0.4189
I was excited because I had hoped it would solve the issue of the ring tones NOT working for TEXT messages.
NOT ONLY did it not correct that...
1. BUT I lost all of my videos and pictures in the Media Hide APP...
2. It duplicated several contacts... not all but some... so that is weird... and honestly it seems to duplicate contacts that are listed by a Business Name.... those were the majority of duplicates.
3. The little pictures I assign to contacts and the logos for businesses... are messed up... at least the LOGOS for businesses are not self sizing so you can not tell what it is in the contact screen (none of these were issues yesterday)
4. When I try to delete the duplicates from the contacts... the trash icon jumps to the left when I touch it... and it will NOT let me delete the duplicates... so I am forced to do it thru my OUTLOOK on the computer
I just downloaded the software update 2 hours ago... so I have no idea what else may have gone WRONG with it...
I do not even know what this update was supposed to be fixing... because the text ring tones are all I am MOST upset about loosing and it looks like the wording on the contacts changed to say EMAIL ring tones... instead of text... and I do NOT have one single BBM contact.... so TEXT and BBM should share that feature... since EMAIL is now a stand alone contact ringtone... so many features center around BBM and I have no blackberry friends...

It just seems bizarre that the text/ringtone issue would not immediately be resolved. Text is the way more people communicate today over vocal calls...and..the feature existed in previous systems. How could it not exist in their newest product??
You had mentioned u downloaded the newest update with the hope the text issue was resolved. Why did you think it would be? Did they ..BB..say they had a fix?
Another issue..that perhaps someone could help me with on same issue is that when I text using the q10...the text space is two lines....and if that a text happens to run three lines ...i can no longer see what I am texting...until..it is sent. Thus makes no sense..as this too was not part of the previous sysems where you were ALWAYS on last letter typed. Anyone else that that issue and perhaps know the fix?

Software Updates ADR Issue: "Failed to download the update from the internet. Error = 5"

"Failed to download the update from internet. Error = 5"
The above is the error I am getting when running any ADR. The error is quite clear software updates are failing to download and Error = 5 being a permissions error its clear that the downloads are failing due to incorrect permissions applied to the download
path.
Here is the last bit of my ruleengine.log, everything above is the same except for the update trying to be downloaded of course:
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download ContentID 16860969 for UpdateID 16857152. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading contents (count = 1) for UpdateID 16857255
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
List of update content(s) which match the content rule criteria = {16861141}
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Downloading content with ID 16861141 in the package
SMS_RULE_ENGINE 6/26/2014 9:21:59 AM
5148 (0x141C)
Failed to download the update from internet. Error = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download ContentID 16861141 for UpdateID 16857255. Error code = 5
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to download any update SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Failed to download update contents. SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
No new update was added to the package. Package "SCP0008A" would not be updated.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Failed to run the DownloadAction for the AutoDeployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
STATMSG: ID=8706 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_RULE_ENGINE" SYS=SCCM-MPS.DSCICORP.COM SITE=SCP PID=2376 TID=5148 GMTDATE=Thu Jun 26 13:22:00.164 2014 ISTR0="SMS Rule Engine" ISTR1="Failed to download one or more
content files" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Enforcing Create Deployment Action SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>SCP00055</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>0</Duration><DurationUnits>Hours</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>true</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>true</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>true</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplaySoftwareCenterOnly</UserNotificationOption><LimitStateMessageVerbosity>false</LimitStateMessageVerbosity><StateMessageVerbosity>10</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>true</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Test ADR</DeploymentName><DeploymentDescription>Test
ADR</DeploymentDescription><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
Parsing Rule XML... SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element DeploymentId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupId SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Could not find element UpdateGroupName SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
SQL is: select cis.CI_ID from vCI_ConfigurationItems cis join vProvisionedCIs pci on cis.CI_ID = pci.CI_ID where cis.CI_ID in (16793068, 16793070, 16793441, 16793445, 16793531, 16793686, 16793688, 16794597, 16794600, 16794602, 16794604, 16795443,
16795445, 16795709, 16795711, 16796210, 16796222, 16796292, 16796298, 16799495, 16799503, 16799602, 16799700, 16799703, 16799705, 16799712, 16799718, 16800300, 16800302, 16800367, 16800369, 16800371, 16800375, 16801224, 16801227, 16801237, 16801239, 16801287,
16801289, 16801559, 16801566, 16801996, 16802034, 16802839, 16802841, 16803306, 16803310, 16803420, 16803422, 16806477, 16806479, 16809354, 16809360, 16809393, 16809397, 16809774, 16809786, 16809792, 16813338, 16813348, 16813636, 16813638, 16814948, 16814950,
16815151, 16815153, 16817088, 16817102, 16817108, 16817398, 16817400, 16818677, 16818691, 16825397, 16840448, 16840458, 16840460, 16840462, 16840690, 16840700, 16840702, 16840710, 16840824, 16840826, 16842640, 16842641, 16842802, 16842803, 16842841, 16842870,
16842871, 16842896, 16842917, 16843017, 16843042, 16843049, 16843051, 16845981, 16846404, 16846751, 16846757, 16848017, 16848021, 16848664, 16848687, 16849383, 16849385, 16852506, 16852514, 16852516, 16855484, 16857102, 16857151, 16857152, 16857255) order
by cis.CI_ID SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
0 of 115 updates are downloaded and will be added to the Deployment.
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Enforcing Actions for Rule 16777228 failed!
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Updated Failure Information for Rule: 16777228
SMS_RULE_ENGINE 6/26/2014 9:22:00 AM
5148 (0x141C)
CRuleHandler: Deleting Rule 16777228 SMS_RULE_ENGINE
6/26/2014 9:22:00 AM 5148 (0x141C)
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\16777228.RUL
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5148 (0x141C)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Refreshed ScheduleList instance for Rule (16777228) from schedule string () with next occurence (12/31/1969 7:00:00 PM)
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
FindNextEventTime found next event for RuleID 0 as :1/1/2038 12:00:00 AM
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
RuleEngine: Got next rule execution time successfully. Next event is in 12369097 minutes
SMS_RULE_ENGINE 6/26/2014 9:22:10 AM
5228 (0x146C)
Sleeping for 15 minutes SMS_RULE_ENGINE
6/26/2014 9:22:10 AM 5228 (0x146C)
Also, I do not have a patchdownloader.log anywhere, Ive checked all aforementioned locations from various sources and it just simply does not exist on my SCCM server. Here is my setup:
Server1: Primary server with all roles installed locally except the site database is on its own server. WSUS is installed locally here and DB is stored here.
Server2: SQL DB for Primary site DB
Server3: Secondary remote site running MP, DP, SUP. DB is SQL Express local.
So the SUP role was installed successfully on both server1 first and server 2 second with the site servers accounts. The SUP Synchronizes successfully and I can see a large list of updates available for use but not downloaded of course. I have set WSUS option
to store updates locally and have plenty of space at the target destination.
So here is my issue, I have been working on this issue for the better part of a week and understand the error code from the ruleengine.log to be a permissions issue. I have also proved this out but creating a test ADR with minimal updates and applied NTFS perms
to the target path for Modify with the everyone group (testing purposes only). The updates downloaded successfully. So this puts me right back to where I was, knowing its a permissions issue but not understanding what permissions are needed. Let me explain
further.
The best way to start is to show what perms I have to the target location for downloads/wsus/sup anything:
Path: \\Server1\UpdatesAndDefinitions (permissions being applied to the UpdatesAndDefinitions root folder)
SCCMAdmin (account used for most SCCM tasks except for NA) / Modify / Share and NTFS
Server1$ (primary site server) / Modify / NTFS
Everyone / read and execute / NTFS and Share
There are other system generated perms but the above three are the important ones. So hence my confusion I know that the SCCMAdmin account or the Server its self has to be accessing the target directory so why is it failing with a permissions issue?
My next step was to enable Auditing on the target path. Doing so revealed just what I thought and through me into further frustration:
A network share object was accessed.
Subject:
Security ID:
SYSTEM
Account Name:
SCCM-MPS$
Account Domain:
DSCI
Logon ID:
0x3e7
Network Information:
Source Address:
fe80::306a:8827:8672:3ba5
Source Port:
50329
Share Name: \\*\UpdatesAndDefinitions
A handle to an object was requested.
Subject:
Security ID:
DSCI\sccmadmin
Account Name:
sccmadmin
Account Domain:
DSCI
Logon ID:
0xad903c
Object:
Object Server:
Security
Object Type:
File
Object Name:
F:\UpdatesAndDefinitions
Handle ID:
0xf5c
Process Information:
Process ID:
0x10cc
Process Name:
C:\Windows\explorer.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
ReadAttributes
Access Mask:
0x20080
Privileges Used for Access Check:
Restricted SID Count:
0
Now I may not be the best I traversing through the mess of audit entry's and translating them, but from what I can see the two accounts that have the proper share and ntsf perms ive listed above are indeed the ones accessing the target location and the audit
code is success. I filter for failures and found no audits for failures whatsoever yet my downloads still fail religiously, unless of course I open myself up with the everyone group.
So next... I tried adding in the Network Service account with proper permissions, the Local Service Account, my user account, and all no go's.
Next... I remove the SUP roles from SCCM checked the logs for deinstall confirmations, and reinstalled these roles. No Go!
If anyone can assist I would be in your debt and very grateful.
Oh last note, but very important note I'm running SCCM 2012 SP1 CU4
Thanks,
Michael
MichaelSpaulding

I just tested with the everyone group further; I added everyone with modify for ntfs and just read only for share and downloads failed!
I then changed the share perms for everyone to change and the ntfs to read/execute and poof downloads complete! Obviously change share perms for everyone leaves me open which Id like to prevent, so finding what account is being used is crucial.
I have already tried adding all of the SCCM accounts I use and the servers themselves as change perms to share and ntfs and have not had any luck.
MichaelSpaulding

Issues with 2007-004 AirPort Software Update

Hello - I saw some threads around this re: other updates.. however, I have a MacBook Pro 15.4" with version 10.4.10. This weekend, Auto Software Updates updated the Mac OS with the 2007-004 AirPort patch. Prior to this, I had perfect 801.11NG connectivity with my router (D-Link DIR-655 N-Extreme) - all 4 bars lit up no matter where I was in the house. However, since this patch, my connectivity has become very flaky. Sometimes I'll have strong connectivity for a few hours, then it will suddenly drop (will go from 4 bars to 3 - then will have performance drag on my applications or drop completly).
I notice while watching my router statistics page that throughput drops from 50-60mb down to 11 when it drops.
We have an iMac in the house which is NOT experiencing this issue (it is on 2007-003). I also have 2 Apple-Tv's, neither of which are having this issue either.
This is extremely frusterating - as not having stable wireless on a laptop is very painful. I've noticed threads where this patch was suppose to fix this problem for people who had 2007-003 patch. For me, it has caused the reverse.
Any recommendations or thoughts? I'd like to roll-back to 2007-003, but it's not clear how to do this - but if I could, I could at least isolate it to the patch, and not some other coincidence.
Thanks, Ed

The light sometimes remains on, even if i lock the keypad. Beside this, i noticed take my battery lasts like 1 hour while the light is on. This happens few times, but is really annoying.. Also, i now that the theme effects are not essential, but i want to keep my phone fully functional, so i'd like to know what's this issue about..
@metalfan I didn't expected a quick answer, i was only preoccupied for these problems
How can i to restore the original firmware?
I tried to remove my sim(also i don't use a memory card), but nothing changes...

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

Is anybody else having issues with Software Update Server offering Airport Utility 6.1?

Running 10.7.3. Everything else is hunky dorry, but no matter what I do, I can't get this update to show up to clients.
Settings are set to:
NOT automatically copy and updates from Apple (but this update shows the blue circle reflecting it's copied)
NOT automatically enabled copied updates (but this update has the checkbox enabled)
DELETE outdated software updates (I had previosly been struggling with Choose Version, but this seems to obviate the need for that)
I've stopped swupd, removed the update, updated the catalog, re-enabled. The catalog updated, the file re-downloaded, but still.... won't show up to clients.
Is this update (Airport Utility 6.1) working for anyone else? Could it be a global issue related to this update, or is this just another instance of swupd flakiness?

You can still use iDVD even though Apple doesn't support it. It still works like a champ.
A lot has changed in the new iMovie. Some of the changes are good, but some not so much. My biggest problem is that the video quality of shared projects is INFERIOR to the old iMovie. So for now, I've gone back to the old version. Hopefully Apple will issue an update that will fix this.

Major Sync and software update issue with windows 7 and iphone

Loved my iPhone 3g and love my 4.0! My only concern is syncing and software updates are sporadic.
When I first purchased and sync'd my 3g on my laptop, that I had since 2005 w/XP home 64bit, it would constantly (1 out of 5 times) show phone was disconnected and could not sync. Purchased a desktop, 2009 w/Vista 64bit (same issue mentioned continued) then upgraded to windows 7 64bit (same issue mentioned continued).
Both pc's are authorized and contain the same apps and software. I went through all trouble shooting steps (authorize/deauthorize, phone hard boot, sync w/airplane mode on and/or off, uninstall and or reinstall iTunes, etc...) when both phones would brick after software updates on both pc's.
The last software update 4.0 and most recent 4.2.1 went well on laptop with XP and no longer shows sync issue. The problem continues on the windows 7 and backup has completed successfully 3 times.
Long story short, I have to pray the laptop never dies because iTunes, syncing and software updates on XP works now! The problem with software update, backups and syncing persists on windows 7.
* I was able to apply 4.2.1 software update on XP and then connect to windows 7 to sync and backup successfully. I then disconnected/reconnected iphone to windows 7 and problem happened again, unable to sync phone was disconnected error message.

I've had my new pc for over a year, never had any probs syncing my iphone (then a 3G but now the big 4!)
I went to sync updates to Apps and a couple of tunes I had downloaded straight to my phone only to get an error message 'iTunes has stopped working - windows is checking the problem' followed by another messaged telling me there was a problem causing the program not to work correctly. Windows will close the program and notify me if a solution is found'
Well..... I have NO music on my iPhone and every time I try to sync, the same error messages come up and the bloody program shuts down....

Software update 1.2 Issues

Similar Messages

Maybe you are looking for