Software update dosen't responds.

Hello everyone! Its been 5 months since using Nokia N8 and suddenly SW Update dosent responds, though it shows the awailable update 014.002 (version number) but as soon as I hit START UPDATE nothing happens. A solution would be so appreciable. Thanks.
Nothing changed even after soft reset!

I don't know if it's released through Ovi suite, but you could try to connect and check if it's possible to update that way. I guess it is, since you should have the option to reinstall the fw there.
Have you tried to turn your phone off with the 8 seconds press? Hold the power button down untill you feel 3 quick buzzes, then turn your phone on again the normal way. Does it work now?

Similar Messages

Software update not opening/responding

Symptoms:
- Click on software update, and stops responding
- no window pop up
- mouse turns into rainbow wheel, and never stops spinning when scroll to toolbar
- moments later, activity monitor shows in red 'not responding'
Background:
- updated to os Lion 10.7.2 yesterday
- time machine to boot all snow leopard data onto lion
- mid 2010 MBP, nvidia Geforce 320M
- first software update, ran to 1.2/1.22gb and stuck for an hour+
- forced terminate
- next attempt, offers to try recover last update window or close and start a fresh, chose both after new tries, all fail
- now symptoms are as above.
Additional Notes:
- Safari lags terrible, cannot load apple discussion pages (on iPad)
- iTunes freeze when iPad tries to sync, let alone transfer purchase or update to iOS 5
Attempted fix:
- Create new non-admin user, does not work
- Create new admin user, update does not work
Help will be greatly appreciated!
Let me know if more details required,
Jack

Edit:
I.T. crowd lesson 101.
'Have you tried turning it on and off again??'
It seems stress and lack of sleep is depriving common sense, thanks all and have a good day~

Trying to install software update, phone stopped responding and gives error code 9

While trying to update software on my iPhone 4, it stopped during installation and gave error code 9, now it says the phone must be restored but will not complete the installation and still gives error code 9, very frustrating. I tried on 3 different computers, same results.

reset preferences -
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
photoshop: https://forums.adobe.com/thread/375776
if that fails to solve the problem, restart in safe mode and test. if ae works, you have a conflicting non-essential program. you can use your activity monitor to find it.
if restarting in safe mode fails, uninstall, clean (Do a clean install) and reinstall ae.

Software Update not responding

Software Update is not responding. Every time I try to open software update, it gives me the spinning wheel, and doesn't progress. Eventually, it tells me that App Store is not responding, and I have to force quit the app store. I tried going through the Terminal, and nothing happened after I typed the command (using sudo) and entered my password. I'm also having trouble installing programs using OS X's installer app, and I'm wondering if these problems might be related.

Try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT1338 Software Update says it can not connect to the internet - why?

I had to take my MacBook in to have it worked on. I can't afford to buy a new one so I have to fix this one. I had OS 7.2 Lion installed. Since then Software Update will not work always saying I should check my network connection to make sure it is operating normally as Software Update is not responding. I also get messages that I am not connected to the internet. I tried to update iPhoto 9.2 to 9.2.1 and when i finally got it uploaded off the internet [took forvever] it would not load saying I needed iPhoto 9.2. to load it! When I tried to send what I had shot from PhotoBooth to iPhoto 9.2 it said I did not have iPhoto at all. Is there anything I can do myself to correct this situation? Has anyone else experienced this kind of thing?

Did this happen to you,too? Or something similar?

After trying a software update it froze midway and is now not responding and not being recognised by itunes. Help!!

Hi
My 3rd Gen Ipod Touch was undergoing a software update when it stopped and itunes threw up a message saying "Update cannot be completed due to an unknown error". I disconnected and reconnected the ipod, and itunes suggested I restore the ipod. I started the restore and it froze midway and again said "Cannot be completed due to unknown error". The ipod is now frozen with the apple logo and an empty progress bar. It is not responding to anything. Windows is recognising it by opening Itunes but Itunes is not showing the divice in the pane. I dont know what to do! Please help!

See Here for Device Frozen
http://support.apple.com/kb/ts1445
Device Not Recognised
For Mac
http://support.apple.com/kb/ts1591
For PC
http://support.apple.com/kb/TS1538
And Here for further help:
DFU Mode
Open iTunes and Connect the iPhone to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPhone in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

The software update server (nrc1) is not responding

the software update server (nrc1) is not responding
I have been receiving this message on my Snow Leaopard iMac for weeks now when I try Software Update ....
There appears to be nothing in the Communities database about it, my internet connection works fine and always has ... any ideas?

Some things you can try:
1. See if software update works from another account.
2. Boot in safe mode. See if SU works. If so, reboot normally and try again.
3. If those don't work maybe you need to delete the software update cache.
~/Library/Caches/com.apple.SoftwareUpdate/
Note there are two plists assocated with SU but I don't think deleting them will change anything since there is nothing significant in them. They are,
~/Library/Preferences/com.apple.systempreferences.plist
~/Library/Preferences/ByHost/com.apple.SoftwareUpdate.XXXXXX.plist
where the X's are a sequence of hyphenated upper case leters and digits.

Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

If you have enough room on the boot drive, head to System Preferences > Accounts and create another Admin Account, log out and into it and try your Software Update again.
If this doesn't work, connect a Ethernet cable to the router or modem (power off/on) and try again.
If this doesn't work then run through this list of fixes.
..Step by Step to fix your Mac
Diagnosing network issues

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

The Software Update Server (r344.local) is not responding.

Hello Everyone
I hope someone can help me with the below.
I recent updated to OSX 10.7.3
Since the update i havent been able to run automatic updates, it trys to run and then comes back with the below.
" The Software Update Server (r344.local) is not responding. "
" Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance. "
So i go ahead and click it - It runs a connection test and im 100% connected to the net....
I really need to fix this as since i have updated OSX half my programs wont open with out the updates....
Any Help would be Fantastic!!
Cheers
Chris1985Condon

CHAMPION!!!!
Thanks, For a while there i was beging to worry!!

The Software Update Server (10.0.0.250) is not responding.

Since upgrading to LION OS v 10.7, i cannot get software update to work and this is the message i keep getting "The Software Update Server (10.0.0.250) is not responding."
I had to download itunes update off support website to get it to work. i cant get the Java update or anything elseto work. any help?

Hi. This jsut helped me:
HazyRigby
Re: Software Update can’t find the update server
Sep 8, 2008 12:49 AM (in response to blue.blar)
Hi blue,
Assuming that your Internet connectivity is working fine otherwise—
Try moving (if you'd like to replace it if this doesn't fix the problem) or deleting the file /Library/Preferences/com.apple.SoftwareUpdate.plist.
If that doesn't work, I'd go to Apple's downloads page and get the 10.5.4 combo updater and install that. That might fix it.
Hope that helps!
—Hazy
iBook, iMac (early Intel), MacBook, Mac OS X (10.5.4)

The "Software Update" buttons "Finish" and "Cancel" don't respond when I click them.

A small popup will appear in the lower right of my screen stating that FIREFOX 32.0.2 is available for downloading. I click on "Download Now". Another larger popup appears entitled "Software Update".
This is completely blank except for three buttons in the lower right corner. The first is suppressed. The second, "FINISH" is enable. When I click on it, nothing happens. The third, "CANCEL" doesn't respond when I click on it either.
This is my first experience with this issue. Normally I am able to download and install new releases of FIREFOX without incident.

'''[http://www.mozilla.org/en-US/firefox/all/ Download Firefox Full Installer For All languages And Systems]''' {web link}

After a recent software update my iphoto program no longer responds and freezes the my imac

After a recent software update I opened iphoto and was asked if I would like my photos geographic location used for mapping where photos were taken, I answered no and now Iphoto no longer responds and freezes all computer functions. Unable to force quite application. What can I do?

This is iPhoto for iOS, not OSX. Despite having the same name, they are completely different programs. You should repost your question in the iLife/iPhoto area.

Iphoto and Itunes not responding after an Apple Software Update

Hi
Afew days ago I did the Apple Software Update and since then I haven't been able to get onto my Itunes or Iphoto, both of which I use quite often. Itunes just doesn't load at all and Iphoto starts to open the page but then that multicoloured ball appears and it doesn't respond. I am just wondering why this is happening and whether it's happened to anyone else at all? Ideally I'd like to get rid of this new update but don't know how to go about it. I'm a bit of a computer dunce so if you could offer any solution in a straightforward way I would be so grateful. Thanks!

created a new user account and the same problem arose there as well.
Then you need to re-install iPhoto:
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applcations Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
This process will not affect your Library of photos. However: Always back up before an operation like this.
Regards
TD

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Software update dosen't responds.

Similar Messages

Maybe you are looking for