Software Update Installer stuck on "Configuring Installation"

Hi, I just received my Mac Pro yesterday and, of course, it needed some updates. After I downloaded some software updates and the large Combined Update for Leopard, I chose to restart the computer to let them install. As of about 45 minutes ago, the progress bar hasn't moved (approximately at a 2% position). It isn't slowly moving; rather, it's not moving at all. The window simply says "Installing 7 items" and "Configuring Installation".
I have a feeling that this is caused by the Combined Update. Is this normal, or do I have a corrupt update?
Thank you!
Michael
Message was edited by: PaintballMJM

i have the same problem.
go to and delete everything in my HD/Library/Updates.
then run update again and choose only the leopard update.
best to use a cable than wireless, this is a huge file.
hope this helps... sara

Similar Messages

Software Update seems stuck on "Configuring Installation"

i got the automatic update notice for the latest OS 10.5.? i don't remember
went to download the new software. now its been stuck on "configuring installation" for about the last 15 minutes
how long is this process supposed to take?

Give it at least an hour. BTW, make a bootable backup/clone of your 10.5.3 installation before proceeding? If not, tsk, tsk. See these for details:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
If you cancel the installation operation, you have a good chance of mucking the OS up. Subsequent recovery is tenuous. If you're lucky, you might still have a bootable installation. If that's the case, then download and manually install the 10.5.4 COMBO update.

Verizon Software Update Installer??

have my S4 connected to my PC via USB... in the autoplay no Verizon Software Update Installer shows up.. how do I d/l the installer software.. trying to set this up for when the new Update comes thru for my S4.. should be soon from what i am reading... tried d/l Kies to the PC from Samsung.. all it does is freeze my FF and Chrome.. so this Verizon Software Update Installer should work hopefully once I get it d/l..
any help appreciated...

I finally got it to Pop-up after numerous tries... it then took 1 hr 20 minutes to complete from start to finish... whew... all I cared about was putting just about all my apps on the 32gb micro-sd card rather than have them take up all that space on the phone
thanx

E63 Software updater fails to start, configuration...

When I try to run the Nokia software update, I get this cryptic message:
Shutting down the application
Configuration error
Nokia Software Updater has detected a configuration error. For more help, click here.
Clicking for help leads to a generic page that is essentially no help.
Anyone seen this before?
I am running Windows XP Pro on a decently equipped machine.
(I'd attach a screenshot, but I can't figure out how to do that on this editor.)

I have PC suite 7.1.40.1
I do not have Ovi Suite.
In order to do the update, I am using a stand alone update from Nokia called Nokia Software Updater v 2.4.1en-us. I got this application by going to Nokiausa.com and selecting my phone model and downloading the updater they indicate for my phone.
PC Suite does have an "update software" button, but all this button does is start the stand alone updater, which gives the aforementioned "configuration error."

Software update installer - Error 1720

Hi. Anyone else unable to install the Software Updater on XP Professional SP2?
"Error 1720: There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contat your support personnel or package vendor. Custom actino Kill_process error -2147217407, : Line 5, Column 1, "
Thanks!
Greg

I had the same error when trying to run software updater - turned out to be corrupt repository:
To fix a corrupted WMI repository, you have to reinstall WMI. Follow these steps:
For Windows XP Service Pack 2
Click Start, Run and type the following command:
rundll32 wbemupgd, UpgradeRepository
This command is used to detect and repair a corrupted WMI Repository. The results are stored in the setup.log (%windir%\system32\wbem\logs\setup.log) file.
For further info please do Internet search on WMI repository

Error mess software updates -installer could not install some files in "/"

I get this message regardless of the software update. Just started today. Has anyone else had this issue? If so, any idea how to fix. Thanks so much in advance!

There may be an error in the computer's directory, requiring a repair; some kinds
of errors or damage to the data in the hard drive are not responsive to attempts
to use the booted Disk Utility version on the OS X Installer disc #1, and while it
may be worth a try to see if that Disk Utility could at least give it a go, the usual
kinds of third party disk utilities (if this is the case, a directory error or damage)
would be along the lines of DiskWarrior, to rebuild or replace a directory.
The slashmark / usually indicates the mount point, of the internal main hard disk
drive partition used by the OS X. So, there may be other reasons why the update
installer does not appear to be working correctly or at all in this matter.
I've not seen such an error message before; but for general maintenance and
before any issues would arise, I try and do preventative maintenance; to include
startup in SafeBoot (shift key held until login screen) and then run Disk Utility to
'repair disk permissions' on Macintosh HD; then when done, note repair logs.
And restart the computer normally. {Also, I have & use Titanium Software OnyX
in its Automation mode every month or two; and choose all checkboxes. This
is also set to automatically restart when the tasks are completed. + It is free.}
To start the computer from the Installer disc and run Disk Utility from there,
involves holding the C key on restart with the OS X install disc #1 in the
optical drive; and when in the Installer, often a second window where there
is a main Installer menu bar, there are drop-down menus from clickable words
across the top bar. Various options are there, and Disk Utility is among them.
This version of Disk Utility can be used to repair disk, repair disk permissions,
and also there are other more active tools among its utility features. This is an
installer, too; with options of several kinds. The Utility can also reformat, etc.
So be careful in what you choose to run. The repair disk and repair permissions
are both ones that may be a bit helpful, at least in the process of elimination.
If the directory is bad, a retail DiskWarrior utility may need to be purchased from
a Mac-friendly vendor; be sure that DW version covers your OS X system level.
Good luck & happy computing!

Nokia Software Updater installation error!!!!

I'm gettin an error msg while trying to install the nokia software updater... Error message is "Minimum memory requirement is 256 mb" and after pressing ok "Installation operation failed... fatal error during installation". I hav no idea why this is taking place as my c: drive has almost 15 to 16 gb of free memory.... 2. another problem is that it skips steps 3 and 4 while installing just goes directly from step 2 to 5
Solved!
Go to Solution.

remove all components of pc suite, drivers etc. clean it out compeltely, reboot your computer and try to reinstall all components again
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

ITunes 7.1 Software Update installation error message

I've tried to install it, but Software Update keeps giving me the message:
The update "iTunes" could not be verified and expanded correctly.
Make sure you have permission to write to /tmp/502/TemporaryItems/com.apple.SoftwareUpdate, then try again.
I repaired permissions with Disk Utility but it didn't help. The funny thing is that this update arrived together with QuickTime 7.1.5 which installed with no problem. 3+ GB free on HD.
Any ideas? Thanks!
Original flat-panel iMac still runs great, if a bit slowly Mac OS X (10.3.9)

I am happy to report that I ran "System Restore" and restored to a date prior to my attempted iTunes update.
SUCCESSFUL!!!

Software update installation fails on 10.6.8 any ideas

Since I upgraded my Intel IMac to a 2tb drive I've been getting the software update telling me there are two updates to load (involving a restart) the download works and the instalation appears to be normal until the restart when the system tells me the install failed. Anybody getting the same problem?

Hi, I have the same problem. Imac OS X 10.6.8 (late 2008) Snow Leopard. I posted same question yesterday. 27 views but no replies yet. I have 6 updates that download but won't install. Sorry I can't help. If I get a reply with help I will pass it on.
O-P

BUG: Apple Software Update installs 32-bit iTunes 8 on 64-bit Systems

Hi, all! Jon here. Just wanted to point out that when Apple Software Update updated my iTunes from 7 to 8, it installed the 32-bit version on my 64-bit OS, and so when it finished and I opened up iTunes, I got a message that it wasn't compatible with my operating system, and therefore I had to go to Apple's website and download iTunes again myself. I think ASU should check to see which operating system the user is using and download the correct program accordingly.

http://www.apple.com/feedback

Build & capture task sequence fails during software update installation

I'm sure this has been discussed a thousand times already, so I hope no one minds talking about it at least one more time. About 6 months ago I created a reference image using a build and capture task sequence within SCCM. After discovering
there were certain updates that would kill a task sequence (because they required multiple restarts), I was able to exclude these updates from deployment so that my task sequence completed successfully. Fast forward to today. I'm working on updating
our reference image to include the last 6 months of updates. Again, I'm having trouble with the task sequence failing to complete. I have excluded all of the updates mentioned in
Microsoft KB article 2894518. I'm able to build the image with all software updates up until 6/30/2014. When I deploy my software group that contains updates from 7/1/2014 to 12/31/2014,
however, the task sequence fails. I'm pulling my hair out trying to figure out which update may be causing the issue, and trust me, I don't have much hair as it is. So, here's my question to all of the experts out there. What is the best
method of debugging this issue and finding which update may be the culprit? The log files really are confusing, so I'm hoping there are some common codes or phrases I can search for within those files. Any and all help is much appreciated. Thanks...

> I'm working on updating our reference image to include the last 6 months of updates.
Since this is a Build & Capture task sequence and not joined to the domain, you'll need to treat it
like a workgroup computer. Here are the big three things that usually trip things up:
1. Initial Management Point: The Setup Windows and ConfigMgr step should have the SMSMP=<fqdn>
property specified, as the device won't be able to see the list of MP's in Active Directory
2. Content Location: Make sure the reference machine's IP address falls within an IP Range
or Subnet ID boundary, since it can't use a AD Site boundary as a workgroup machine.
3. Win 7 - NTLM Fallback: Windows 7 devices may need
hotfix KB2522623 installed (as a package/program or with offline servicing) to ensure they fall back to NTLM properly when they fail to authenticate with Kerberos.
If you have those 3 things taken care of, then you should copy all the logs off of the machine while the
error message is still being displayed, zip them, and then share them out through OneDrive or Dropbox.
I hope that helps,
Nashs
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

Software update installs twice

Software update often seems to install the same software release twice. After launching the Mac Appstore to identify software updates it sometimes identifies versions that have already been automatically downloaded and installed. This is particularly annoying for Xcode and software such as Final Cut Pro which are multi GB in size and take a significant time to download.
What gives?

I thought the same too, but then realized the first part was the update getting verified, then the actual update. I wonder if it is the same for you.
Hope this helps.
- Mini

How to cancel MacBook Air software update installation?

My MacBook Air shows that it is installing the software update (latest version) but has not made any progress on the progress bar after 5 hours. Any ideas? Can the update be cancelled?

It's probably already installed. Check in about this mac, more info. The latest update will place the SMC Version to:
1.73f65 for the 13" 2011 MBair.

Nokia Software Updater Installation

Hi,
I have reinstalled Nokia Software Updater (version 1.4.56en) three times and each time I fired up the installed the Nokia Software Updater it says:
Missing Software Components
Critical software components are missing.
Please reinstall.
FYI:
I have reinstalled Nokia PC Suite (version 7.0.8.2) three times before reinstalling the Nokia Software Updater (version 1.4.56en).
I am using Windows Vista business Service Pack 1.
Please help. Thanks.

you can try the following:
1- remove both applications (nokia pc suite and NSU)
2- restart the computer
3- log in as Administartor and not as a normal user. this is important as you need administrative rights to work with both softwares on vista.
4- re-install both applications, and try again.
sometimes you may also need to disable any running firewall software on your computer .
another tip, right click on th NSU icon on the desktop, click on compatibility tab and select "disable visual themes".
i hope the above will help you.
Fear not those who argue but those who dodge

Software Update gets stuck

The last 2 times Software Update on my MacBook Air told me that updates are available, I proceeded with the installs and it hung.
Both times
- the software update required a restart before installing
- got stuck at the screen that shows the default Leopard wallpaper and the timer
- holding the power button to power off and then starting it again seems to do the trick
No a big deal, just a bit annoying. This does not happen on my macbook, just the macbook air.
Anyone else experiencing this issue?

You know what... that website ALSO doesn't seem to finish loading. There is a dark graysish block with icons for all the different platforms and then there's a column of options on the left. But what seems to be the main part of the page on the lower right (when scrolled to the top) just shows a throbber / activity indicator and nothing happens.
I tried this on an entirely different internet connection, tethering with my iPhone and using 3G with an entirely different ISP. That connection is a few Mbps so I should expect faster response but still it takes forever. I gave up after 5 minutes not checking to see if the thing will actually load because expensive data use was building up on my iPhone while the throbber was displaying.
My Mac experience just keeps getting bumpier

Software Update Installer stuck on "Configuring Installation"

Similar Messages

Maybe you are looking for